HP does a 3' rd gen I7 Pavilion Elite with an SSD?

Similar Questions

• can I upgrade a computer laptop hp pavilion ze4900 with a ssd?

  The hard drive is a failure in a hp pavilion ze4907wm (ze4900 sold through Wal-Mart).

  Are there any special considerations to replace the hard drive (capacity limit etc.)?

  Can I put a SSD PATA in there?

  Thank you

  If you can find a PATA SSD then probably. You should make sure that the rider is manually to the master. There could also be compatibility problems.

  Overall, I would recommend you just replace it with a regular PATA HDD... There is less chance of a problem.

• I have a Pavilion Elite M9150F and it seems that the ignition button does not work. The power light is on

  My Pavilion Elite M9150F P/N KC880AA-ABA running Windows Vista Home Premium 32 bit. The device turns on no switch or remote control. He lite is turned on and power is running through the unit until button (checked through AC voltage detector) are there known issues with these? Are there spare parts? It doesn't hang or move the last time it was turned on. What are my options? Thanks for any help.

  Hello cello6996
  
  You are in warranty? If so, I would suggest contacting HP. If you are out of warranty, follow the steps below.
  
  How does a power button is essentially that it shorts two special pins. This short film is a signal to the power on the power supply and all components. A quick Google search reveals the most common method to do this is to disconnect the wires to the pins on the motherboard power button and then tap a screwdriver against just these two pins. Use gloves as a precaution. or a screwdriver with an insulated handle.
  How to bypass the power on button on pc
  Is there a way to bypass the power switch?
  
  If the computer starts correctly something wrong with the power button. If the problem persists, it is more than likely a problem with one of the hardware components and the problem will have to be isolated further. Let me know what happens.

• Recovery Manager does not restore image on HP Pavilion p6227uk [Windows 7]

  Hello

  Currently, I'm trying to reformat my HP Pavilion P6227uk, running Windows 7 Home Premium 64-bit.

  I reformatted this machine once before (a couple of years) using recovery disks created by the system. I saved these same recovery discs to reformat, I try now to complete.

  So far I performed the steps in the order as I did before - place the CD1 in the drive, boot from the CD, run a disk factory reset. First time I tried, she returned with the error message almost immediately, he does not reformat (or something to that effect) with this error code: 0xe0ef0002 and instructions for "contact HP support. AT 01:00. You must be kidding.

  I tried again and got exactly the same result. Decide to leave for another day, when the support would be around, I tried to boot normally (with the disc from the drive). This time, I got a black screen with white, printed on the top left text:

  BOOTMGR is missing

  CTRL-Alt-Del to restart

  Oh good God. I rebooted and tried to get to the system recovery. Nada, BOOTMGR is still missing. I put the recovery in drive and started to Recovery Manager disk and proceeds to try every single diagnostic at my disposal. Nothing's wrong, apparently, except for not being able to start Windows. Get a bit peeved (I have a disorder that leaves me open to huge bursts of anger, this did not help), I decided to try the Factory Reset. Oddly enough, it doesn't give me an error message, but seemed to be progress in the "Factory image restore. 4% and then 8% - and it's been stuck at 8% for the last 12 hours at least. I don't particularly want to turn it off for the risk of breaking something - even if Recovery Manager seems pretty broken as it is. There is a blue arrow pointing to 'Reformat the partition of your hard disk Windows' and that's all. No button is available (except the red X), nothing seems to happen anywhere. Extremely disappointed.

  Any help would be appreciated. I'll be phoning HP support tomorrow to get answers, although I don't have a particularly good story to keep my mood level when you speak with assistants and on pending emails is not my thing either - I saved important files on an internal HARD drive before you start (disconnected the motherboard HARD drive) and the hours of waiting and hours for email support is not an option.

  Thank you in advance, from the bottom of my heart. It couldn't have come at a worse time.

  -JR

  Hi, JR:

  While I can't help you with the problem of specific recovery disk (and is probably impossible anyway), I have a solution to your dilemma...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• HP pavilian hpe h8-1205: my gforce 740 graphics card does not work in my HP Pavilion HPE h8-1205

  My 740 gforce graphics card does not work in my HP Pavilion HPE h8-1205, please help

  Supaman4040, welcome to the forum.

  I think that your problem is related to the BIOS.  The 700 series video cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI in its motherboards up to mid-October 2012.  Your computer was released January 25, 2012.  You must contact the card manufacturer to see if they have a VBIOS update which will allow the card to work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP wireless keyboard from 2.4 GHz on the HP Pavilion Elite 083 Volume controls does not not in Windows 8

  I have a HP 2.4 GHz wireless keyboard on a desktop HP Pavilion Elite 083 UK:

  Model KG-08510 rev 1.1

  Product #ABU KZ256AA number

  Part number 505143-031

  .. Since the upgrade to Windows 8 Pro to Windows 7 Home Premium, I have problems with getting control of Volume +, - and disable keys on the keyboard to work reliably in Windows 8 Pro.

  In summary, the symptom is that when I start the PC from a start-up to cold which is a full power down of the State of the volume on the keyboard controls do not work.

  However, if I unplug and re - plug the USB wireless receiver that came the keyboard on the PC then on the keyboard volume controls begin to work again.

  I tried the following things to try to solve this problem:

  -Made a lot of new installation of Windows 8 i.e. reformatting the hard drive (no recovery) and fresh install Windows 8 on a blank hard drive.

  -Installation of Microsoft Windows all the updates available for the machine.

  -Manually install drivers wireless keyboard on the site of HP driver for my computer HP Pavilion Elite 083uk (this allows the screen display on to CapsLock and numlock which works reliably every time that I start).

  -Disable 'fast start up' in Windows 8 power settings

  -Using different USB ports on the back of the machine

  This question is re-producable each time and the keyboard volume buttons work fine even from boot cold when I was running Windows 7.

  I think that I have now found a solution / workaround to solve this case no matter who is interested.

  1. download and install the Microsoft "DevCon" tool that provides an interface to command line for Device Manager.

  Download and installation instructions are here:

  http://social.technet.Microsoft.com/wiki/contents/articles/182.how-to-obtain-the-current-version-of-device-console-utility-DevCon-exe.aspx

  2. create a Windows scheduled task with "highest privileges" that works on logon that issues the following command:

  DevCon restart 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  This restarts "HID-compliant consumer control device" that is listed in my device manager which is middle for the proper functioning of the volume control and mute buttons on the keyboard (keyboard functionality is via a separate driver which is not affected).

  NB. you need to replace ""HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02"with whatever hardware ID is listed in the device for that Manager.»

  3. If the above does not work, then you must create a scheduled task to run a batch file with the following:

  DevCon disable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  DevCon enable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

• FN + esc does not work on my HP Pavilion

  FN + esc does not work on my HP Pavilion

  How can I fix?

  Hello

  If you are running Windows 8/8.1 install HP System Event Utility on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66604.exe

  If you are running Windows 7, download and install the software of HP Quick launch on the link below.

  http://h30642.www3.HP.com/pub/SoftPaq/sp56501-57000/sp56929.exe

  After the relevant installation has completed, restart the laptop and let Windows load fully before checking the fn + esc combination.

  Kind regards

  DP - K

• My hp pavilion elite hpe-204f video does not work

  My hp pavilion elite hpe-204f video does not work so I replaced it with another video card that worked. After installing the card and start the system I saw the video on my monitor. Great! I need to replace my video card. No problem.

  Afer by purchasing and installing a new video card, I have no video. I put a new one in another computer. This works. I put the video card which worked yesterday... that did not work.

  Then, I put the original video card that I thought that did not work on another computer and Yes... it worked.

  Should I assume that I have a bad graphical location on the motherboard? If so, short of buying the same motherboard is there anything else I can do?

  Thank you very much for the research.

  Hello

  The integrated video processor still works when the video card is removed?  If Yes, then try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  If the above is successful, then re - install the map graphic and clear the CMOS.

  Another thing to try:

  A good cable video know.

  A known good monitor.

• My drawer does not open on my hp pavilion s7320 npc do I need a new disk

  My drawer does not open on my hp pavilion s7320 npc do I need a new disk

  Hi tonelocs79,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  See the below link for the HP website and check if it helps.

  Opening a stuck CD or DVD Drive Tray

• Pavilion Elite 9120Y running Windows7 (64-bit) has frozen. BIOS does not detect not SATA.

  HP Pavilion Elite 9120Y (about 1 year and more) running Windows 7 (64 bit) froze in the middle of a task.  The fan used to rev up every once in a while for 1 year or more.

  I opened the box and looked for the capacitors blown on the video card, but the video card is OK.

  A few times I was able to go in Windows 7 safe mode, but the computer froze in safe mode.  After a while computer ceased to recognize the HARD drive.

  Diagnosis (memcheck) startup DVD worked for a day or two before that stopped working.  Now, I have a Fedora LiveSpin USB and it starts after I disconnect the DVD, CD and HARD drive (SATA all).  Even when the HARD drive is connected, and the Fedora boots, he becomes failure SATA COMMRESET.

  I have to power off / power on many times before the start screen appears (otherwise, it's only in black).

  I have reset the CMOS (change jumper setting and changed back to the original setting).

  In short, it looks like SATA features doesn't work anymore, or bad BIOS.

  How can I request the upgrade of BIOS (for the HP 9120y website) if it does not start Windows 7?

  Any other solution of workarounds, tips, troubleshooting pointers appreciated.

  Thank you.

  The phase I) prepare
  Make a note of the version of the BIOS installed on your computer.

  Phase II) prepare a bootable USB key.
  Visit http://www.biosflash.com/e/bios-boot-usb-stick.htm to find out how to prepare a key USB bootable BACK.

  Phase III) extract the ROM BIOS update the BIOS executable file.

  (1) download the HP provided executable update BIOS.
  (2) download 7zip from sourceforge.net.
  (3) install 7zip
  (4) run 7 - zip file manager, navigate to the provided HP the BIOS exe and extract in the content (by pressing the blue less icon).
  (5) locate the VL (number) (number). (number) (number) file to the USB stick and copy.
  (6) on the USB stick copy port or the VLnn.nn file and rename it HPBIOS.ROM.

  The phase IV) BIOS upgrade
  (1) switch off the PC, in need of updating
  (2) fix the USB
  (3) to start the PC, and you should see the c: BACK prompt.  No harm done so far.
  (4) issue the dir command to see the HPBIOS. ROM on the USB stick c: / > directory.
  (5) reboot the PC, but this simultaneously press the CTRL and the key HOME together when the PC starts.  Hold it for a minute.
  (6) you can release the keys after a certain time (when we know the PC fan is buzzing and do something)
  (7) you don't hear about 5 long beeps (which indicates the BIOS upgrade is complete).
  (8) restart the PC.

  Audit of phase V)
  Check to verify that the BIOS version number reflects the newly installed version.

  References:
  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/BIOS-recovery-process-for-HP-systems-with-AMI-BIOS/m-p/360147/highlight/true#M9181

• My cooling system does not work properly model is Pavilion 5CD2086QMY A7A43UA #ABA g7

  My cooling system does not work properly model is Pavilion 5CD2086QMY A7A43UA #ABA g7

  Use a can of compressed air in the opposite direction of the normal airflow with the machine off.

• HP Pavilion Elite m9100t - installed XP w/SP3, sound does not work.

  HP Pavilion Elite m9100t desktop PC

  I just installed XP with SP3 (dual boot with Vista) and I can't get the sound to work. I tried to install drivers for SoundBlaster, but the installation site, he said that the material was not there, now installed right. I know that's not true because on Vista, everything works well on this OS.

  That's what I have on my machine, and I need drivers for these for XP.

  Spring 2008 Original Creative Sound Blaster X - Fi Xtreme Audio
   
  Spring 2008 Intel Matrix Storage Manager
   
  Spring 2008 Original Realtek High Definition Audio
   
  Spring 2008 Original ViXS PureTV-U B 48-0 TV Tuner

  I've already updated Chipset and LAN.

  If someone could help me, it would be greatly appreciated!

  All together!

  No installed Service Pack 3 and BOOM! Windows Update the sound card with the latest drivers!

  Re-installed SP3 afterwards and everything is functioning!

  Thanks for your help!

• How to add to my HP Pavilion Elite HPE-590uk Usb 3.0

  Hi does anyone know if I can improve my HP Pavilion Elite HPE-590uk for usb 3.0 and if so could you recommend a product that I could buy to do this.  Thanks in advance.

  One of them check it:

  http://www.overclockers.co.UK/showproduct.php?ProdID=CC-003-AK

  This is to use a pci-e x 1 card. You have 2 these slots available. This will show you how do:

  http://h10032.www1.HP.com/CTG/manual/c02255267.PDF

  See the section on the replacement of a card.

  Instead of plugging on the long black slot which is a video card plug into one of the slots black short. You have Windows 7 I think which means that you will need a driver, but that should come on a CD with the card. Will need you a power connector (molex) on the map, too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to access the BIOS on a Pavilion Elite e9237c with mouse and keyboard wireless?

  I have a desktop computer Pavilion Elite e9237 with a wireless keyboard and mouse. I tried to access the BIOS by pressing F10 at startup with no luck, and I can't access any of the other menus for the start-up eiither. I don't have a PS/2 port on my computer, so I can't get a wired keyboard and mouse. Does anyone know how to access the BIOS with this configuration?

  I bought a USB keyboard and he answered in the same way... No bios access. I then studied why it did not work and discovered that it was the way in which he has been connected to the computer. I had initially plugged into a USB hub when he was not working and I moved it directly into a USB port and it works! I plugged my keyboard wireless directly into the USB port and it works too! Thanks for your help... I wouldn't have thought of it if it wasn't for to recommend you the USB keyboard.

• HP Pavilion Elite HPE - 532 s: 'Secure Boot Configuration' not found?

  Hello support, I wanted to disable startup secure for my office.
  I have a pavilion Elite HPE - 532 s Bios 7.15 I followed the step of many posts, but I don't have it under the heading "security"?
  I am on window 10 64-bit UEFI.
  I wanted to disable, because I have a new GTX 960 graphics card and it stuck on the HP logo at startup all the time when I use the new card. !!

  I tried to disable the security slot, but no matter what I do I get a black screen for my card both old and new so I have to reset the bios settings.
  Help me please.

  Thanks for the additional information.

  Here is my diagnosis/notice:

  I don't think you'll be able to get the GTX 960 to work with this system.

  Why it won't work in the UEFI/GPT:

  It will not work in the UEFI [I think] 960 GTX is one card of UEFI and you must disable secure boot to make it work. Your BIOS is only "UEFI compatible" originally planned for Windows 7 [which does not support secure boot]. If you are unable to disable the secure startup, you can not use this card.

  Why it won't work in legacy/MBR:

  It won't work in legacy because it's a single card of UEFI.

  My suggestion:

  Return to the legacy/MBR and use a graphics card that has a dual BIOS BIOS/hybrid or one who supports in particular the Legacy BIOS as described in one of my previous posts.

  Some other things to consider:

  You PSU has enough power for this card? I think it takes a minimum of 400W PSU.

  You connect the auxiliary power connector?

  Have you tried to disable "Intergrated Graphics" in the BIOS [as appropriate]