HP dv6-1230US ethernet problem

Similar Questions

• Quick Launch for the DV6-1230us buttons do not work

  The QLB for volume control and mute on dv6-1230us running Windows 7 do not work. I installed the sp48159 driver, but it was no problem.

  Hello

  This can sometimes help.

  Stop the laptop, remove the AC adapter and remove the battery. Now, press and hold the power button on the laptop for a good 30 seconds. Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K

• adapter power supply for laptop DV6 1230us

  Anyone know what the output current should be for a DV6 1230us laptop power adapter?

  The original power supply has failed and has been eliminated - now, we tried two adapters purchased off ebay, and both overheated.  They were the two 60w and spec'd 3.5 released.  They were the two brands not HP.

  The specifications are not available on the HP Web site, and it seems that the good spare HP P/N 693711-001.

  We would like to undestand if power supply is incorrect and the origin of the problem, or if there is something wrong with the laptop (which continues to work very well...)

  It should be at least 65 Watts (18.5V x 3. 5), but you can use a 90w like this template:

  http://www.eBay.com/ITM/original-OEM-genuine-HP-Compaq-laptop-power-cord-adapter-608428-001-609940-001-/181304904317

  The models v and 19v 18.5 seem interchangeable, as long as it's the big gun with the centering on the inside PIN. An adapter low power will heat up.

• Pavilion Entertainment PC dv6: need a new hard drive for the dv6-1230us

  My question is about the HP Pavilion Entertainment dv6-1230us PC. Recently, it was abandoned, and since then it has been giving me the following message if poster every time it starts.

  Not found boot device
  
  Please install an operating system on your hard drive.
  
  Hard Drisk (3F0)
  
  F2 System Diagnostics
  
  "For more information, please visit: www.hp.com/go/techcenter/startup"
  
  I know it's important to run the hard drive test, but when I run the diagnostics of the system for the Test drive, it says:
  "HDD test failed.
  There is no hard drive.

  I was also on the proposed site and even after "reset my BIOS to default", it recommends running the hard drive test, which does not simply because it has not really helped me the "there is no hard drive. There was a YouTube video that I came across thus suggested pulling the hard drive and diconnecting and reconnect to correct the error in this case that the son is detached, but that no longer works.

  SO, I don't know if there is anything more that I can do, I guess that the hard drive is super dead.

  It comes with a Seagate ATA hard drive. I was wondering if I could replace it with a SATA hard drive or should it be an ATA? (Even has the material capacity to support a SATA drive?)

  Also, it is even useful to replace the hard drive? Should I get a new laptop instead? This laptop is used mainly for just browsing online and checking emails.

  Any help is appreciated, thanks.

  Yes, the hard drive is so dead, that he not yet register as a hard drive. The dv6-1000 series certainly uses SATA, not ATA drives so I'm not sure of what you see. You can replace it with any drive SATA 2.5 inch width 9.5 mm thick.

  Watch this video between: 53 and: 59 and see that it's a SATA drive. If yours is different, so you have confused with your model.

  https://www.YouTube.com/watch?v=QQx7PlIXFuE

  Hard disks are a small fraction of the cost of a laptop and if your what it takes to, I would say that to replace the hard drive rather than buy a new one.

  It is an excellent drive at a great price:

  http://www.Newegg.com/product/product.aspx?item=N82E16822236563

  You have recovery discs? You run Windows 7? Post back if you need help more to restore system software.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Anci SATA for HP Pavilion dv6-1230us controller driver.

  I need driver Intel Sata Controller Anci (I want to install windows 7) for HP Pavilion dv6-1230us.

  Hello

  If you can still access Windows, please go to your device manager. Click on the pointer little next to IDE ATA/ATAPI controllers and display the name of your controller SATA ACHI.

  I think that according to the manual, it takes the ICH 9 M.

  Here is the link to the drivers: you must select the 32 or 64 bit version as appropriate.

  Copy them to a USB FlashDrive as you see them. Do not put them in a folder. That plug into a USB port. Start the PC and press F6 to load the sata driver or if the installation asks you for this you will need to use your Up / Dn arrows on your keyboard and select the Intel(r) ICH9M-E/M SATA AHCI Controller.

  Please note that it may not be initially visible in the list of drivers on your screen, this is why you must use the arrow keys to find. Once you, just select it and press on enter and hope that your installation will continue.

  Link to the drivers:

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20216&lang=eng&OSVersion=Windows%207%2C%2032-bit * & DownloadType=.

  Paul

• Pavilion dv6-1230us: HP Pavilion dv6 problem "Enter the password administrator or power on password"

  Ask administrator password... when I go any number or letter after 3 times

  IT IS THE MESSAGE

  DEACTIVATION OF THE SYSTEM

  80917243

  ANY HELP?

  Boly try.

  35675885

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Configuration ethernet problems

  Have problems to connect via Ethernet to a LOGO! 12 / 24RCEo Siemens

  Ethernet IP = 192.168.0.2

  subnet = 255.255.255.255

  LOGO = 192.168.0.1 IP

  subnet = 255.255.255.0

  Maybe I should switch Ethernet subnet. How?

  Choose "Using DHCP" if possible. The computer is better to choose a usable IP address that you are.

• Pavilion dv6: graphic driver problems

  I recently updated my graphics drivers on the AMD website, which I did not know that at the time, did not fully support the laptop itself. After having done that, I had a problem with playback of videos where in certain circumstances the video would be black but audio would play again. I tried to uninstall the graphics driver that seems to resolve the video issue, but then none of my games would launch at all. Is there a way that I can return the graphic drivers for the basic version where I had not either of these issues?

  Hello:

  See if works by running system restore.

  Select a restore point created before you tried to update the graphics driver from AMD.

  If you are not familiar with how it works, please see the info on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

  If this does not work, reinstall the switchable graphics from AMD/Intel support page driver and the driver of your laptop.

  If you are uncertain which one that would be, please send the number of full model of your computer laptop dv6.

• Satellite M105-S3004 ethernet problem

  I have Toshiba M105-S3004 problem ethernet adapter. Now my laptop using Windows XP Media Center 2005 OS bundle.

  I want to install new windows, my ethernet card is good & no problem with network connected.
  After a few times OS reboot & disconnecten cable network, the ethernet card is missing, not found on Device Manager...
  If Disable LAN setting BIOS and OS, active new setting of LAN and login again on OS, ethernet adapter found & good job on network... but after a few times and logon after reboot turn off & on again once the ethernet card is missing again...

  I have to change my OS from Windows XP Home Edition, MCE 2005 and WinXP Pro, but still experience this problem.

  I should upgrade the BIOS?
  Can someone help me?

  HM, tried with a live distribution of linux like Ubuntu? I highly recommend that you try it and if the network card is removed when using Linux then it s certainly a hardware related problem. But before you try linux, you need to update your BIOS and everything by default.

  Welcome them

• Pavilion dv6: blue screen problem

  

  GET THIS EACH THEN & NOW THE SCREEN AND MUST SHUT DOWN LAPPY. PLEASE HELP WITH THE SOLUTION!

  HI @Ayushi_kh

  Thank you for your response.

  Here is a link to the HP Pavilion dv6 Notebook PC. Please see Chapter 4 for removal and replacement.

  When I was browsing through the maintenance and service guide, I noticed you have switchable graphics.

  That being said, I suggest you do a recovery in factory.  This will reinstall the drivers of graphics cards correctly and I hope to solve this problem.

  Performing a recovery of system HP (Windows 7)

  During the recovery, there is an option to backup your personal data if you do not have a recently I'd do one now to avoid any data loss.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  If for any reason any recovery did not resolve the issue please provides your exact model of DV6.

  How can I find my model number or product number?

  Good luck!

• Ethernet problem on wake since 10.11.2

  Since I installed the latest (10.11.2) El Capitan refreshes, if my end 2013 27 "iMac wakes up, intermittently, the network does not work (browser cannot load a URL, Mail does not work, etc.).  It is not just DNS as incoming IP addresses does not work either.  The machine is connected by Ethernet, no wifi, and the wifi is turned off.  The machine has a fixed IP address on my home network and don't use DHCP.

  When the failure occurs, if I disconnect the Ethernet cable from the back of the Mac and reinsert immediately, networking features are restored. This machine has worked perfectly in this mode because I bought it in March of 2014; It is the first time I've seen this kind of problems when he wake up.  I usually put to sleep using Cmd + Option + Eject or leave it to sleep alone. Intermittent failure in the morning seems to be independent of the way in which he fell asleep.

  Anyone has any ideas I could try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• HP Pavilion dv6 power supply problem

  I have a Pavilion dv6 for the past three years; It worked perfectly until recently.

  Two months ago he began to take more time for the prosecution, but he continued to work

  fine. The battery always charge at a slower pace, but now there's another more

  serious problem.

  If the battery status says he has some fees (even up to 98%), but as soon as

  I pull the plug on, the computer dies immediately. It does not even

  turn on if I do not connect the charger. If I turn on the computer with charger

  connected, the battery status is always the same. If I leave the computer for a couple

  days without connected charger, the battery loses some (but not charging

  too); This means that the battery itself is not really in a very bad state.

  I suspect some hardware glitch! What could be the problem; y at - it an idea?

  Control of operation of the equipment (battery test):

  http://support.HP.com/us-en/document/c01443317

  or

  http://support.HP.com/us-en/document/c03463381

• Pavilion dv6 laptop Audio problem

  Product: Hp Pavilion dv6 Notebook PC

  Product number: QE068UA #ABA

  Windows 7 64 bit

  Hello, so here's my problem. This laptop is only three days old, and already I have a problem. So what is happening is that the audio transmission is having a problem. I have 95% use a headset and the audio works fine with headphones. BUT what happened earlier today that I just listened to a few songs and then I got a call from Skype, and just as I began to speak, the sound was messed up. The person's voice played through headphones, but my computer sound (the song) started playing through the computer and not the headset. Then, I tried to unplug my headphones and plug it back in, but then it didn't always work. The only way it worked was if I held the helmet and halfway into the socket. So, basically, I can't really talk to anyone on the computer without computer audio is turned on and messed up. Any help would be good. Thank you!

  Welcome to the forum.

  Try this and see if it helps.

  Right click on your sound on your taskbar icon and enter the Settings of Volume Option.

  Check the boxes for your audio devices.

  Click OK

  Now, click on the sound icon and see that you will have a sound control for your devices appear next to each other - there will be a line through them.  If you set the primary audio device, everything goes with it, adjust the other (s), it/they adjust only.

  Adjust the checked boxes and sliders to get what you want.

  CHANGES 1

  November 3, 2011

  Sound--> reading--> speakers and headphones-->--> advanced properties

  
  

  I think you need to use the "Exclusive Mode" setting on the Advanced tab to keep only one application (another) to capture the sound control.  I don't know which application would have priority (or which one you prefer under what circumstances)-I think this is where you will have control over what happens when, for example, you use a Skype headset session and start a game session which (I assume) would use the speakers on the laptop (or external speakers (, depending on your configuration.)  See the graphics down.

  Change 2

  November 3, 2011
  

  See graphs of 'Communications' down
  

  Note that you can play with a variety of other sound settings (without making any damage) to increase the listening pleasure.  Just go slowly and check between the changes to make sure that you do not have too much too fast.

  Beware of the "improvements".

  For example: The Loudness equalization can make a song sound clean and strong, it could deafen and strangle with the next song and make it difficult to hear. It is the opposite of what we want to do.  So desperate, try - if it works, use it, otherwise shut it off.

  GRAPHICS CARD:

  Right click on the sound icon:

  

  Volume Control Options:

  

  The options resulting:

  

  
  

  "Exclusive mode" check or uncheck the box to control the behavior of this device!

  

  Improvements

  

  Communications:

  It is a setting in the Strait called "Communications" - If you use your laptop to make phone calls, you can adjust this setting as well as others.

  Right-click on the icon of your Sound --> click on "Volume Mixer"--> click on the little icon under the word "Applications".

   

  Good luck!

  I hope this helps you!

• HP Pavilion DV6 video drivers problem

  Hello world

  I bought a HP Pavlion DV6-6C52EL, last year, with Windows 7 pre-installed. After two months I have upgraded to Windows 8 and now to Windows 8.1 (I did a new install of Windows 8 and an upgrade from 8 to 8.1).

  But I have some problems with the video drivers. In particular, each time I get an error message about 'Application of the load MMDriver. First of all, I must say that my VGA is an AMD Radeon 7470 M + the built-in Intel HD 3000 (my processor is an Intel Core i5).

  So I uninstalled the video drivers (the AMD and Intel VGA drivers) and reinstalled the new on the HP Support site, but they are for Windows 8 (not for the 8.1) and not updated. in fact, I always get the error message, and I see that the AMD Radeon 7470 does not work. Only the Intel HD 3000 jobs. In Device Manager, I get the error Code 43 on the Radeon. Suggestions? I've already updated the BIOS to the latest version, without success. Should I downgrade to Windows 8 or 7?

  HP, please update your drivers for Windows 8.1.

  Thanks in advance for your help.
  

  12/15 PATCH: Finally, I have completely solved the problem. Now, both the VGA and the brightness adjustment work perfectly.

  After numerous tests, the pilot plants and the facilities (and a lot of patience ), I would like to share my solution for users with my same problem.

  Before you begin, please check the HP support Site if Windows 8.1 drivers are now available.

  • If Yes, you will get your graphics card works only by installing the proper drivers.
  • If No, please go to read this post.

  ==========================================================================================

  -If you plan to make an own 8.1 Windows Installer, just download the Windows 8 drivers for Intel HD integrated graphics card and the dedicated graphics AMD Radeon on the HP's Support Site and install them. They must work immediately.

  -If you have updated your system to Windows 8 Windows 8.1, as in my case, you may have some graphic problems. I'll show you how to solve these problems step by step.

   

       1. update your BIOS to the latest version available. Download from the Official Site of HP Support.

        2 uninstall the driver of Intel's integrated graphics and the dedicated Control Panel AMD graphics card driver. Do not restart your PC.

        3 using the free tool Display Driver Uninstaller (search on Google for the latest version), clean the registry keys and system files to completely remove drivers AMD. Restart your PC now.

  4. download the HD Graphics of Intel and AMD Radeon drivers for Windows 8 on the HP Support Site, but only install drivers from Intel.

        5 enter the BIOS Setup and change the mode of "Switchable Graphics"on"fixed".

   

        6 now install previously downloaded AMD Radeon drivers and reboot your PC.

  When you restart Windows 8.1, you should get the fully functional Radeon; check in the Device Manager to see if it's ok. If this isn't the case, please follow my guide illustrated in the 'Update 12/08' above post and try with that.

  You have now (finally!) the Intel and AMD Radeon graphics working with the brightness setting.

  Thanks anyway for users who have tried to help me.

  * NOTE: Those not worked for me, for my setup (Intel Core processor i5 2450 M with Intel HD 3000 and AMD Radeon 7470 M) so use these guides at your own risk. I decline all responsibility in case of problems or malfunction of your system. *

• I have a hp dv6-2155tx touch problem response

  Hi I have a laptop HP dv6-2155TX in which I have a capacitive touchscreen before my keeboard which does not respond to the touch, I know not what is the problem can you help out me...!

  Try a hard reset. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on