HP dv6-1360us Question about the location of the hard drive

Similar Questions

• Satellite P200-1BA - questions about the HARD drive RAM upgrade

  There is a 2nd internal HARD drive Bay, but not a female connector. Can I install it? How?
  There are 2 slots for RAM, all together 2 GB. Is it possible to exit an and instead place a token 2 GB to 3 GB total or should I always double channel pair RAM?

  It is not possible to install the second HARD drive. The laptop box is universal for all models P200, but some of them are delivered with 2 drives hard HDD upgrade is not possible.

  With the RAM modules, you can do what you want. To be more precise, YES! You can remove a 1 GB module and put 2 GB RAM. Please just use high quality Rams and not some products without name at low cost.

• Satellite A100-451 - a few questions on the HARD drive, speakers

  I hope someone can help with these that I could not help on the information line.

  How fast is the hard drive on this laptop? He said SMART 160 GB, but does not specify a speed, although I'm guessing its 5400 RPM.

  Are the Harmon Kardon speakers? The specs say Toshiba stereo, and even on the Comet, he said Harmon Kardon. Here is a good bass-wise?
  Looks like there is no bluetooth, I find a little surprise.

  Finally, the only place wherever I can find it for sale is the comet... I was wondering it anyone has also saw that I had some dodgy experiences with them.

  See you soon
  Matt

  Hello

  I found some info that the rotation of the HARD drive is 4200 RPM. I'm not sure 100% on speakers but usually if laptop a harman/kardon speakers it is not in the specification but for A100-451, it is not the case. This info, you can get the garage directly.

  BT is not available, and it shouldn't surprise you because most of the A100 models are supplied without BT module. You can use any time key USB BT. IT is simple to use and really cheap.

• Pavilion dv6: I did now the hard drive on my HDD test failed and the pavilion dv6

  The problem is that my laptop when I start it it takes like 10-15 minutes to load.

  I see loading windows xp logo and then he is suspended for more then 10 minutes or more.

  Now, I tried to do a test for the material. I turn on the laptop and click the F2 key and I entered the test screen of hp hardware. I moved start test drive hard and after 5-10 seconds or if stopped with a test failure:

  That's what I see now on the screen of the laptop:

  Test Drive: 1

  INTELLIGENT control: PAST

  DST short: FAILURE

  FAILURE ID: 64WE1A-5BC7Q7-XD003F - 60Q 903

  PRODUCT ID: XE041EA #ABT

  Hard drive 1

  Edit:

  I tried now all the other tests in the F2 screen, and they all went except the short DST hard drive that has failed.

  Better to buy a new hard drive and replace it with this one and I install the new OS on it own?

  Test drive: FAILURE

  Does that mean ID failure? I need to replace with a new hard drive? If so can I buy a new hard drive and replace it only with myself?

  I did no other reviews but I want to first of all understand what it means to id of failure.

  Hello

  The hard drive is faulty defiantly and Yes should not replace. Failure ID is given, so if your laptop is under warranty you can give this to HP and it will then allow you the replacement

  Usually the instructions on how to replace the hard drive are in the manual of your computer that you will be able to get a copy on the HP site. You can also buy the HP installation media which will be operating system files on your for reinstall on the new hard drive.

• Question about the graphics driver

  Okay so just close a week ago my laptop (ASUS K55a) has decided to freeze on me while I look a a video on youtube (essentially what I normally do after obtaining of reception class at night). After that, however, I turn on my laptop after forcing him to stop and while the mouse was mobile, I couldn't click on anything whatsoever. Its as if it was running, it took, the incredibly long just at startup and when he did, loading everything and takes a lot of time.  (I rebooted once a couple and even started in safe mode, nothing seemed to work)

  So the next day I decide the best option here is to reformat because I really can't do anything else to my knowledge base. After reformatting all, it seems to work very well, but here's the problem: whenever I try to install the graphics driver updated on the computer I get this error:

  

  He had what appeared to be some kind of basic graphic driver, but after searching for the name of this driver, the solution was that this particular driver was related to corruption. (Also to try to get windows to update this basic driver, he would sit there for about 10 minutes then would proceed in a BSOD).

  -If I run dxdiag.exe it shows s/o under the view tab

  -Graphics Card allegedly inside: Intel HD Graphics 4000

  -J' tried installing the following but it says that my computer does not meet the minimum requirements:

  Intel® Graphics Media Accelerator Driver, Windows 7 * 64, Windows Vista * 64 (zip)

  Data sheet:

  If someone knows the question here please let me know if there is anything, I can do to solve this problem, thank you!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.
  
  
  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)
  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy (compress)
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
  Link to find out how to download below.
  http://www.WikiHow.com/use-SkyDrive
  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.
  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  System specs are extremely useful then please include everything you know.
  
  
  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of Windows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here
  
  

• Re: Question about the display driver for Satellite L850

  So, I bought a Satellite L850 as twe weeks and I am yet to know which driver do I need.
  I mean, it's better is one that comes with Windows Update or do I need to download it myself? I can watch videos and play games pretty decently while I don't mind so far.

  > I mean, it's better is one that comes with Windows Update or do I need to download it myself?

  The Toshiba driver page driver is usually the right one. Updated the and designed for the use of the laptop.
  But if don t have problems even while playing the game, don t change. You know: never change a system running ;)

• I have a question on the HARD drive in a P7-1209.

  My drive HARD Hitachi of the P7 - 1209 old of 3 months is quite a grinding noise coming out of sleep mode. He did since I had the PC.  This noise is normal? I never heard him on any of my last PC with Western Digital drive HARD or my son of Dell.

  Vermin, welcome to the forum.

  I don't think that a grinding from a hard drive is always good.  I suggest to go into the BIOS and running the S.M.A.R.T diagnostics for the drive.  That should tell you if there is a problem.  Here's a guide to help you.

  If your problem is solved, please click "accept as a Solution.

• Pavilion DV6: Loud hum of the hard drive when burning CD

  Recently, I noticed that my laptop makes a fairly loud "buzzing" or "vibrant" sound. I encountered this problem recently when I tried to burn an audio CD. I've read about this problem on other forums of which most, explain that the cause could be due to the type of disc. I have this problem when I read from a disk. This problem could lead to the type of disc that I use?

  Hello:

  It has been my experience throughout my laptop and deskop PC DVD burners do the same racket when it burns CD / DVD, but not when it reads them as well.

  I don't think it's something to worry about.

  When burning a disc, a much more strain is placed on material that when reading a disc.

  I use Memorex or Verbatim quality disc too, and readers always sound as you said.

  One of the burners of my desktop PC is so loud, it begins to vibrate the case and I have to give him a rap on the side for the case of vibrate with the burner in the quiet.

• Questions after the hard drive recovery. No longer can run backups or disk defragmentation.

  This weekend I had a problem with my C: drive. It is in the format of RAID and replace one of the disks. However, I had some problems during reboot and had to use the installation disk to recover. I finally returned the operational system and thought that I have not lost all system data. However, my task scheduler has lost all scheduled tasks, I is no longer perform planned "backup files" in the center of backup and restore and when I force a backup in the backup and Restore Center I have a "the system cannot find the file specified 0 x 80070002. Also, I can not throw the Defrager disc from the control panel of the System Maintenance - only through the command line. Plan a daily Defrag. A file must be corrupted somewhere. How can I fix without having to reinstall completely all of this?

  Because it seems to be no good answer to the problem, I decided to reinstall Vista

• Sound weird coming from the hard drive, every Min or 2-Dell Inspiron 15R SE 7520

  Not really sure if this is still a bad question. This player has not yet failed. It's just making a weird noise, I have no idea what could be the cause.

  http://www.YouTube.com/watch?v=XwYSdD4fyRU

  The ticking, in this video, is exactly the same. The only difference. Undermines the fact every 1 min, sometimes every 2 minutes... and sometimes all 3 or 4 minutes. And he just does the ticking sound once. not again and again.

  If a tick from time to time. You can hear only - when everything is guiet? Just a tick and it disappears for a while?

  Does that mean that my drive has failed? Reason why I'm asking. After a year of use, the hard drive has failed-It just died. Dell has replaced the disc/Msata too. It was near another year, with replacement. Is this a sign that I should back up and save all my info. Contact dell.

  IF kills laptop another disk hard-is there a chance of the motherboard is defective?

  Things that I've tried - defragment the disk, I even check and repair sectors... found nothing.

  Any help would be appreciated...

  thought about upgrading to an ssd, but I really want to do, if the motherboard is to kill hard drives?

  Thanks for reading

  Here I am again, a bit frustrated... Has achieved a good response when I posted... but nothing else after that... Different response of old Story/Issue...same... (((I thought of it out on mine)))

  Don't know if that's the right answer, but I thought that if there was someone out there with the same problem, it might give you some answers.

  After reading and Goggling... I found a few different answers... "My favorite, but NOT CORRECT"... Your drive is dying, you must back up all the files and save them to an external disk, before it fails... where there is a click or a bad sector... it will multiply and more.

  Of course, there is a simple answer from someone who knows nothing about the hard drive. But incorrect. Especially if you do not experience problems or blue screens.

  A hard click or clunk, may be two different things. Non of them pointing to a player out. Depending on the player, it could be a bad sector. It could be one of 2 things, "THERMAL CALIBRATION ROUTINES", or it could be "ADVANCE DRIVE PROTECTION".

  I don't understand how an any of them work, but a quick Google search should provide you with answers.

  On my drive a simple defrag helped. Now I hear the noise, every once and awhile. Sometimes I don't hear it at all in a session. You are not sure if it was a coincidence? But I feel much better knowing what to do.

  Thanks for reading my question and post

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• Question about the charging light on the venue Pro 11 (5130)

  I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

  Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

  White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

• Questions about the management of specific nodes in different hierarchies

  Hi all

  I have a question about the specific management of some particular set nodes, which are located in different hierarchies within a same version.

  I want to know if there is any editing made to certain properties of these specific nodes or if the nodes are deleted/moved/edited approval to be triggered for the data manager.

  or should not allow users to edit (adding/moving/deleting/changing property values) or those specific members.

  
  

  According to my understanding of the nodes of domain prevents the removal of nodes, but I don't want my Member prefix/suffix, domain is the only way to prevent the change.

  
  

  
  

  
  

  Thanks and greetings

  Madhu
  

  We have an obligation to not allow a node to remove or deleted without the approval of the admin, so I created a Boolean property AllowDelete is false, which is substitutable, default and is available only in a category of property Admin, for which most of the users do not have access.  Then, I created a validation of PropRemove with an error message that tells the user to contact a user admin to remove or delete the node.  The admin can change the AllowDelete to true, then can either remove himself or to allow the user to do.

• Questions about the accordion component

  I have a few questions about the use of the accordion component:
  
  1. when my accordion is created it shows the first container child, this child is created at this time and if you go to another child it is also created (but only until it is first accesed). The thing in the first child, I need to access the properties and components located in other children, so it marks an exception to NULL, because I am trying to access the properties or the components that have not yet been created, but I really need to access and transmit values to other children containers at the moment (without their first navigation) , then it is possible to create all the children while creating the accordion although I would'nt need to navigate through its children to create them?
  
  2. is it possible to disable the functions of click of an accordion, so the only way to change bewteen her children is programmatically? I mean, you can click the buttons on the accordion to navigate through his children, but you can also do this programmatically by using the selectedIndex property, so I'll try to disable accordion buttons so the only way to navigate is programmatically.
  
  All the ideas of these two questions?
  

  You can use creationPolicy = "all" on the accordion and it will create all children, not only the first condition. The downside of this is that your application will have a little more time to start. Consider this:

  Child 2:
  

  If you try to set child2.input = 'something', a better solution would be to use data binding:

  Child 2:
  [Bindable] public var inputValue:String;
  

  Now you can do: child2.inputValue = 'something '; If the user interface of child2 have not been created, the inputValue parameter has without adverse consequences; as soon as the 2 child controls are created, data binding will assign the value. If child 2 has already been created, the data binding will also affect the value.

  You can disable the click event to the accordion by intercept and stop its spread, but you must do this in ActionScript, you can't do this in MXML.

  myAccordion.addEventListener ('change', accHandler, true); true means to use the capture phase

  private void accHandler (event:flash.events.Event): void
  {
  If (event.target is mx.containers.accordionClasses.AccordionHeader) {}
  Event.stopImmediatePropagation;
  }
  }

  The idea is that intercept you the click event, as it moves down through the components (capture phase). If the target of the event is an AccordionHeader, prevent you the event to go further - it is to reach the AccordionHeader itself.

  You can put this handler on accordion or its parent up to the Application.

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.