HP dv6-2150us: computer not turn on
My computer stay in a blue screen I tried to make the recovery as new factory, but won't let me not error come and shut down my computer what can I do
The 303 error indicates that your hard drive is defective and must be replaced - it is also compatible with startup problems you describe.
Tags: Notebooks
Similar Questions
-
DV6-2150us->; does not supply power to the top.
Hello
I have a computer laptop dv6-2150us pavilion which, for some unknown reason, does not. I was working very well. I stopped and would not start in a couple of hours. I kept the power button down as others have suggested, but nothing happens. A laptop is dead.
How to deal with a computer that won't even turn on.
One thing I think is to change the battery. Before the power loss, my battery needed replacement. I had to keep the laptop plugged in to work. I couldn't work on the battery.
I would appreciate any ideas. Thank you
Kind regards
Sam
The first thing, remove the battery and unplug the power adapter and leave it without power for a minute.
Then plug the AC adapter in (be sure to leave the battery) and see if the laptop. If it doesn't, the next test would be to check the power adapter (reconnect it in community/points of sale). If this still does not work, you will need to try another adapter to see if the laptop turns on.
-
This computer is the new 12-inch mac that came out this spring.when I've updated about a month ago, it would not turn off. I got tired of hold down the b power button to turn it off. I returned it for a back earlier upward. It automatically updated again and here I am in the same disorder. I think I'll just close the lid and stop worrying in this regard.
Stop your Mac. Use the power button if you wish. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of staff. If it works fine in Safe Mode, restart normally. If it works now, you are finished.
If the problem comes back after a reboot, you have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find bad.
-
HP Pavilion DV6 6c65ed: HP Pavilion DV6 6c65ed does not turn on
Hey
I have a HP laptop since 2012. A few days ago I turned on him and it freezes. IK it turned on again and after a few minutes, it is suddenly turned off.
After that when I hit the power button some lights burnt, but nothing happened. When I plugged the charge light power adapter went white, orange and turns it off.
After that I tried turning on a few times, and reconnect the AC adapter a few times nothing. No lights, no fans, no anything.
Now, nothing is what you do with the laptop.
Does anyone know how can I fix?
PS. I tried a new battery.
HI @JD14HP,
Thank you for your answer and explaining the meaning of the battery.
If you are unable to test the adapter.
If the document on the test it has not determined or helped, please contact HP support for help.
Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.
Good luck and have a great weekend!
-
Pavilion dv6-2150us: scanning wireless to the printer on my computer
computer, Pavilion dv6-2150us, product # WA779UA #ABA, Windows 7 Home Premium
HP Photosmart B209 more Pinter a - m
I am able, with a usb connection to scan from the printer to my computer; I want to scan wireless to the printer on my computer.
Thank you
Hello Mocha7 ;
Welcome to the HP forums!
I read your post on the analysis of the problems with your HP Photosmart Plus B209 a - m and wanted to help.
I don't have the same printer model, but I do not have other HP printers, and the process is essentially the same. When you install the full exercise for the printer software, it installs a shortcut on the desktop that allows you to scan to PC. I did it with two different HP network printers and it works the same for both.
So, you need to check that you have installed the complete service for the printer software. The linked page is for Win7 software and the driver for your printer: http://support.hp.com/us-en/drivers/selfservice/HP-Photosmart-Plus-All-in-One-Printer-series---B2/3777155/model/3777156
IF it shows no Windows 7 when you open it, click the Edit button and select Windows 7 from the pulldowns.
In addition, this link is to the page for your printer troubleshooting: http://support.hp.com/us-en/product/HP-Photosmart-Plus-All-in-One-Printer-series---B2/3777155/model/3777156/troubleshooting
Please note that there are two procedures, you should try to use: printing using doctor Scanand a communication or connection error ... See if they are able to help you solve the problem of scanning.
Good luck
I'm a volunteer and I do not work for, or represent, HP.
========================================================================
If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.
-
I have a MacBook Pro 2011.
The power button does not turn the computer on when the computer goes to black screen.
The battery he is
iI tried to Community assistance to research and tried to wait. The next morning, I was able to turn it back on. Now, it happened again.
Please help me. I can afford a new Mac.
Thank you
Get it fixed. Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple.
-
Desktop computer does not turn on
My office 24 "2009 does not illuminate. I press the button and the chime start but then the computer shuts down.
The OS is Yosemite.
Thanks for your help.
What happens when you follow the steps in the If your Mac will not turn on - Apple Support?
-
Greetings,
I installed updates in my Windows 8.1 partition. Then he asked me to restart the computer, and the message "we could not finish updates, exchange loss, do not turn off your computer" appeared and was on-screen for hours. I thought to reinstall bootcamp but I have software in the Windows partition that cannot be recovered. I read that one of them starts Windows in 'Safe' Mode, but this is not possible. I use a MacBook Pro (retina, 13 inches, early 2015) OS X 10.10.5
How can I fix this without wiping the Windows partition and lose my software?
Thank you!
Have you created a Windows system restore point before the upgrade?
-
Hi, I just refreshed my laptop that I got a few drops FPS at random. Initially, it worked fine, but after a while before instaled Norton started to cause me problems. At this time I uninstalled it and when he asked me to computer restatr now, I did. Now I'm stuck with this message window loading. Restart the computer from time to time, but the message is always the same: failure of configuration of Windows updates. Restoration of the changes. Do not turn off your computer.
Computer: hp pavilion n006sm
Operating system: win 8 pre-installed
At the moment I'm stuck on this window for over an hour and nothing has changedSeems that problem solved by itself. As I correctly uninstalled Norton, I just put my automatic updates and restarted my laptop again. He installed the updates with no problem and its working fine. Seems that Norton was really the problem, will keep you informed.
-
is there a fuse for this laptop? is the computer pavilion dv6-2150us laptop
is there a fuse relpaceable on or near a pavilion dv6-2150us motherboard
Is the power supply for the pavilion dv6-2150us originally?
Remove the main battery and connect the AC adapter and try it turn. It is safe to do so.
If that doesn't work try a hard reset as follows:
Remove the battery and unplug the DC power adapter.
Press and hold the power button for more than 15 seconds.
Plug the DC power adapter (leave the battery for now)
Press the power buttonPlease post your positive or negative results.
-
HP Omni100 200xt; computer does not turn on
I have a little over 2 years old HP Omni 200 - 5350xt CTO of desktop PC. Recently, the computer stopped turn altogether. I've confirmed that this is not a problem with my surge, outlet, protector and that all power connections are connected correctly. When the issue first start occurring I was able to disconnect the PC and would begin to be plugged, he would then suddenly turn off seizure could fully boot. Even if it has disappeared over the last day, however, and the device simply refuses to power on.
Any help would be appreciated. Thank you!
Hello
If you have another set of power adapter, try to use that to make sure that the adapter works very well, or try to use the same adapter into the power outlet different. Also use the link below
-
I turned computer, went online and home page is so small, I can barely read. The window itself covers my screen, but the page is in the middle of the screen of the window, 10 sizes too small. I visited all the Web sites were similarly. This page also. I tried to adjust it myself, but it changed nothing. The display settings have not changed that I am aware, so with the same settings as always, I didn't really know what to change. I tried to use the system restore, but that never worked when I tried it in the past. Indicates an error has occurred and cannot complete. I'd appreciate any help. I'm an amateur, where computers are concerned, but I can get around pretty good if I have good instructions. Thanks in advance for any help!
FYI - HP desktop, Windows Vista, IE8
You might try to go in the Tools menu in Internet Explorer, then Internet Options, then advanced and select Reset.
Restores system will fail if you have Norton and do not turn off "tamper protection '.
-
I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer. Or my computer will recognize any device connected to the usb port. I tried another ipod to check the usb ports work and they are. Ive run out of ideas. help please
Hello
Check with iPod Support and Forums for more information if necessary.
-IPod support
http://www.Apple.com/support/iPod/iTunes and iPod Support
http://www.Apple.com/support/Each iPod - iPod help & Technical Support (part 3)
http://www.EveryiPod.com/iPod-help/index.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I try just turn on my computer, and I get a "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer"let it sit and continues just to treat then turn off and back on - only to endlessly repeat the problem. I can't do anything else that the menu hep access by pressing the F2 key, but I can go anywhere with this option or the other.
Thank you for your help.
3Ran
Hello 3Ran
Thank you for using Microsoft Vista answers Forum!Michael Murphy has provided these steps already; I'll just say it in a different way.
Because you can't go to your office, I suggest that you start your computer in safe MODE. Next to normal mode, it is a different way to connect to your computer and makes a few changes when the problem.
HOW TO START YOUR COMPUTER IN SAFE MODE
- Restart your computer if it is running.
- Press the F8 key after your computer powers initially.
- Once you see the menu Advanced Startup Options , you can stop tapping.
- Up/down arrow keys to highlight your selection.
- Select Safe Mode with network and press enter.
- You should see loading drivers and then Please wait.
- You should then be on the Welcome screen.
Connect to your computer using an account with administrator privileges.
David O
Microsoft Answers Support Engineer
Visit our and tell us what you think. -
My computer it does not turn off when I go early and turn it off?
My computer it does not turn off when I go early and turn it off? u can help me, please!
Hello
· What operating system do you use?
· Did you do last changes made on your computer before the show?
If you use Windows 7 or Windows vista, I suggest you to follow the steps in troubleshooting this article and check if that helps:
You can't do a computer that runs Windows 7 stops or sleep
http://support.Microsoft.com/kb/977307
If you use Windows XP, see:
You cannot log off, restart or shut down your Windows XP-based computer
http://support.Microsoft.com/kb/831431
See also:
Turn off a computer: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions
Maybe you are looking for
-
How can I get this goal and soccer ball out firefox homepage and restore the Fox
Suddenly my homepage has changed from the standard firefox home page (FOX ENVELOPE AROUND THE GLOBE), replaced with the image of a football player chasing a soccer ball - and under the google search engine in a square black Word goal.Then: Stay conne
-
NB550D - can't find Toshiba HDD recovery software
Hello Several days ago, I bought a Toshiba NB550D netbook. He had Windows Starter pre-installed, but I wanted to try Linux. I installed Linux and, of course, left the recovery partition. Now, I would return for Windows. I would like to restore the so
-
Tecra A7 - seeing the battery flashes orange several times
Hello I recently acquired a Tecra A7 but without a battery or power adapter.I bought a power (15V, 0 6 a) adapter and plugged. Whenever I'm trying to power the laptop, the only answer I get is the battery light blinks orange 11 - 12 times.Note: I don
-
Accidentally selected 32-bit instead of 64-bit to the initial configuration
I chose accidentally 32-bit instead of 64-bit to the initial configuration. The computer (Satellite L630) came with a disc. If I create a recovery disc it will allow me to select 64-bit or it will create just once for a 32-bit system? Is there anothe
-
How to open an attachment. Ink
How to open an attachment that ends with. Ink on a macBook using El Capitan 10.11.1?