HP dx2400 boot freeze

Similar Questions

• The BIOS boot freeze

  HP Pavilion HPE h8-1020

  Windows 7

  Computer starts and stops on the ESC press for more boot options screen.  No beeps.   ESC does not work.

  This day-

  1 disk hard disconnected; no luck

  2 disconnected memory in different order (2 sticks of 4 GB each); no luck

  3 tried another power supply; same thing

  4. tried a different keyboard/mouse; no luck

  5. removal of discrete video card and used video mobo; no luck

  Notes:

  -When I removed both sticks of memory, had beeps acknowledging memory was gone

  -When I didn't have a keyboard is plugged in, it recognized keyboard missing

  Suggestions?

  Thank you.

  Darryl

  The steps you have taken to solve the problem would lead me to believe that the motherboard no longer works correctly.

  You observe a code flashes when you press the power button? a flashing red button would indicate systemboard failure.

  On-screen error messages?

  You can try to recover the BIOS. Follow the procedures on this document from HP web compared to the version of the BIOS that has your PC. In case of recovery of the BIOS, then all should be well. If this isn't the case, then it is time to get a replacement PC. You can recover data from a hard drive on the computer when you install in another PC under Windows.

• Peut only the boot without failure; A regular boot freezes on the 'Welcome' screen and fades to black

  I use an ASUS laptop and everything was smooth until yesterday earlier.  I tried to start in class and it took a little longer (stopping at the 'Welcome' screen) but I'm starting up normal and thought nothing of him.  I'm going to the House an hour later and try to start and I can just connect to Windows 7 unless I Boot safe with networking.

  I have no idea how to fix this, I have no CD, I have no Windows CD that's at my parents (and anyway was a CD to upgrade), I spent 5 hours essentially pulling my hair out try everything last night and this morning still will not work.  I am now in safe mode.

  I would like to know all the details you guys need and how to get them and I'll probably get them to you immediately because I really need my computer today.  Thank you

  Driver card mother/Chipset should solve this problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Pavilion a6542 - no boot, freeze on blue HP Invent screen

  I need help... My Pavilion a6542 does not start. It gets stuck on the blue HP Invent screen. The Bios menu is not accessible (F9, F10, F11 keys don't work), even if the keyboard lights are turned on.

  Features:

  It was working fine yesterday, and it does not work anymore. I did not any recent installation or HW SW.

  The PC is only 2 years old.

  Motherboard is Asus IPIBL-LB (Benicia).

  I took the steps - following troubleshooting unsuccessfully:

  I tried another keyboard.

  I tried to boot from a bootable CD (I tried Fedora Live CD and Ultimate Boot CD), but it does not start.

  I reinstalled the cables on the motherboard, I reinstalled 4 memory cards, I reinstalled the HARD drive connectors.

  There is no dust or burned capacitors on the motherboard.

  ==> Someone can help me diagnose the problem and find the solution? Thank you!

  I could see that your troubleshooting resulted in a conclusion that your HARD drive is defective, which confirmed my suspicions.

  You can replace your HARD drive and try to enjoy many services for Hard Drive Data Recovery. First try the manufacturer

  of your HARD drive.

  Best regards

  TEDUin Manila

• a6318f HP pavilion boot freeze prob

  whenever I try to start this computer it brings me to the splash screen, or said the loading of the files in the window and then stops or goes back to the start screen. no idea what's going on. Please give advice.

  No worries people never thought that it was a defective memory chip. Thanks for the help.

• Parasio model SR1650NX: version slot PCIe for model Parasio SR1650NX

  Hello to all members,

  Had a low melting on my desk, so I dragged an old Parasio Compact of the closet in acting.

  I am trying to install an ATI Radeon HD5670 card in the 1650s PCIe slot.

  When I try to start the system after inserting the video card in the pc will not start. Fans of running like crazy, but not

  display and no progress start.

  I looked around for the years 1650 PCIe version, but found no details as the basic layout

  and designations (1 x PCIe).

  Tempting to cross reference the ATI website for my motherboard for the 5670 compatibility was like myself stabbing the

  Eye with a screwdriver... he doing badly and don't's not much else... lol

  Did he know whats going with the boot freeze?

  Thanks in advance.

  Hello:

  I can't find any concrete info, but according to the age of the chipset in your PC, I would say it is not newer than the PCIe x 16 v1.0a.

  http://techreport.com/review/7588/ATI-Radeon-Xpress-200-chipset

  https://en.Wikipedia.org/wiki/PCI_Express

  The Radeon HD5670 is a PCIe x 16 revision v2.1 map, and most of the time that they will not work on a PC with a PCIe x 1 connector. 0 to slot unless there is an update of the BIOS available for your model, which adds support for PCIe x 2.1.

  IMO, you should be able to use a graphics card with a specification file PCIe x 16 v2.0 or more, provided that it works in power supply specifications.

• PC hangs at startup

  My 348CA HP G62 notebook has been freezing periodically.  A difficult start strove to get backup and work again, until this morning.  Now, when the machine starts in Mode safe, it freezes when the login screen is presented.  In normal mode, the machine freezes at startup when windows startup screen display and the screen says please wait...

  The computer is running Windows 7 Home Premium (64-bit).

  At the beginning of February, I replaced the hard drive manufacturers, who wasn't with a different model and size of the drive

  Drive manufacturers: Samsung - model: HM641JI - 640GO

  New disk: Western Digital - model: WD10JPVT - 1.0 TB

  I went into the system diagnostics and did a Test at startup, a Test drive and a Tune Up.

  All 3 failed.

  Starting test failed: failure ID: RGFSTK-5816JL-XD003F-61F803

  Tune Up failed: failure ID: RGFSTK-5816JL-XD003F-60XG03

  Hard drive test failure: failure ID: RGFSTK-5816JL-XD003F-61F803

  Normal mode startup freezes at startup

  Safe Mode boot freezes on the login screen

  Boot safe mode with command prompt freezes

  Any suggestions / recommendations?

  Thanks for the reply. I removed the hard drive and reinstalled. Reset the default bios. The PC froze again. I bought an extended warranty on the drive, so, I'm in the store to get them to make a diagnosis and give me a new drive.

• Compaq Presario CQ70: Problem starting. Windows didn't start up.

  Hello!

  I ask help for my huge problem. My laptop doesn't boot.

  First of all, I got problem with my admin user account. It has no boot at all. Error: "your user account only missed. We could not load it. SRY. "

  Then, I did start my computer and go to safe mode. Then I did a system restore. After that everything worked fine. I was thinking its time to format my computer and update my windows vista to windows 7 Home premium.

  Well, I made a bootable USB Flash drive. Windows 7 installation package. I tried to start my computer several times USB key to install new windows. It never not worked. I look at bios Boot media is the USB HARD DISK.

  Then I losed my nerves.  I did a rom of DVD of windows 7. I put the dvd in cd rom. Then shutdown computer. Launch it and press F9 to get the boot media. I choose CD DVD ROM for the start.

  Then my computer freeze totally... I couldn't do nothing. I wait 2 hours nothing happens. Then I stop at powerbutton force.

  Now my computer starts is completely destroyed upwards. It works the bios very well, but after that, he's trying to run windows. It freezes.

  She's everywhere. I try to run the factory settings. Gel

  I try to start the installation of windows 7 dvd rom. gel

  Flash drive USb does not even start.

  Try to go normal boot freeze after executing the bios image. He tries to run the window loading logo, but it fails and freeze.

  I already have, I thought that my HARD drive is golden. But I did a test boot and bios. It is not very well. None does not at all. So, it shouldn't be broken?

  I tried to do something strange reset HARD drive. Unplug all at my feeder area for computer laptop battery. And push power button 30 sec. But it has no effect at all.

  None does not work should I buy a new HARD drive "?" or is my just locked HARD drive or somethng?

  Brand laptop Compaq Presario CQ70

  Windows Vista

  Version of the BIOS F.26

  Advice, should I try?

  Hi @Koodari,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand you are trying to upgrade your system to Windows 7.  You tried to boot from a USB, but after several attempts you have created a DVD with Windows 7.

  You have tried to boot from the DVD but even once is not successful.

  You have checked the boot order and it is set to 1. USB 2. Hard drive.

  Here is a link to HP Notebook PC - configuration of the Boot in the BIOS system order. to help you to change the boot order.

  Here is a link to HP Notebook PC - perform a recovery of the system (Windows Vista) HP. Follow the process on a disk.  Once you have started on the drive just follow the installation process as you normally would.  Of course this isn't a cover you won't get the option to backup your files.

  To say thank you for the reply, please click on the thumbs upwards the button below.

  If this solved your problem please let other people know in choosing the solution provided.

  Good luck!

• HP Pavilion DV9888eo won't start with My Book Mirror 2 t connected

  Same problem here: http://h30434.www3.hp.com/psg/board/message?board.id=HardwareDPC&thread.id=4367

  Installation program:

  HP Pavilion DV9888eo, AMD Turion TL-60 x 2, 3 GB of RAM

  Western Digital My Book Mirror 1 t connected USB 2.0

  Windows 7 Edition Home Premium 64 bit (clean install)

  Problem:

  -Won't start if the external hard drive is connected to a USB port

  -Boot freezes, the BIOS detects the drive, shows USB 2.0: WD My Book, fan gets stronger

  Tried solution:

  -Different USB ports

  -Varied, boot order first set internal hd

  -Disconnect and start continues

  -Mouse USB wireless at the same time / plug, unplug, almost worked

  Works okey if hooked up later when Windows has loaded (also works just after when it is plugged in after successful BIOS).

  The closest match: http://www.experts-exchange.com/Storage/Hard_Drives/Q_23769717.html

  Any advice how to solve?

  Message edited by lukevader on 10/11/2009 16:02
  Message edited by lukevader on 11/11/2009 01:37
  Message edited by lukevader on 11/11/2009 01:48

  My conclusion: HP BIOS/USB controller isn't working okey with WD My Book when you start the computer. If you wait about 3-4 minutes, to return to the boot. If you re-create the partition in Windows 7, you might be able to speed up the process. I have converted the MBR to GPT (Google more) and reformatted it NTFS. Reducing a starter and holds a GPT formatted, cannot be a boot disk. Now, there are about 1 min delay. If there is a switch to turn off USB Legacy support, that could help. There is not, thanks to the crappy BIOS HP. You can also seek support from Western Digital and discover interesting things.

  Then, finally, it'll pass the boot.

• Select the boot device appears to casual throw & computer freeze certain functions

  HP Compaq Pavilion 64 bit, windows 7 Home premium

  6 months ago replace hard drive with the drive hard seagate 1 TB 64-bit

  Computer functions started random freezing of microsoft works, don't access the start menu, task bar functions, classifications, etc. all random works poorly but still able to use count in browsing the web. I look at you tube for long periods seems to stimulate the problem. Computer being left pending. Computer freezes seems to disappear spontaneously during use or after sleep or restart.

  Commissioning shows a blue square in the middle of the screen with:

  Select the boot device

  ST 1000 DM003-1 ER162

  HP DVD - Ram GH40L

  F4 amorçage using default

  What boot device use.

  Unplugged the hard drive and turned on pc and hp dvd - ram gh40l was only peripheral boot

  Replaced the motherboard battery already.

  I did the command line; sfc/scannow, HDD and motherboard diagnostics, repair of disks does not.

  One alternative is to reinstall windows 7 with discs or install windows 10 as an alternative.

  Hello @zoboomafoo,

  Thank you for all the information!

  What have been the results of physical tests?  If all the past, then it seems that you encounter problems with the operating system.  If the problem is actually related to the operating system, then by reinstalling Windows will help you solve it.  This should help to address issues with malware.  Upgrade to Windows 10 is an option, however, you don't have full support of drivers.  I hope this helps.

  Kind regards!

• Issue of dual-boot on Satellite A200 - xp guard freezing or crashing

  Being well try to install xp along side my installation Win7 (dual boot), but xp guard freezing or crashing.
  Ive done a few discs to slipstream the sata drivers with xp.
  Still will not install clean.

  So I tried to install win7 on the second partition and who will install, but is very slow and crashes for centuries.
  Im sure, I got right sata drivers. (Storage Manager intel matrix of toshiba).

  Anyone can shed some light?

  I have toshiba Satellite a200
  Intel duo t5550
  3 GB ram

  Hello

  If you use SATA drivers then the SATA in the BIOS mode option must be on AHCI.
  If you n t use drivers SATA you will need to set compatible mode.

  Here's a great description how to add SATA drivers

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Good luck

• Satellite L20 260 won't boot to the top, every time it freezes with no reason

  Hi all

  I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
  x 10, Daniele.

  Hello

  It's not easy to tell if the problem is software or hardware related.
  You must install the OS from the Toshiba Recovery CD and again test the functionality

  If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
  You can try using MemTest 3.5 tool.
  It checks the memory of a malfunction.

• PC laptop Pavilion 15: freezing boot screen after installing Visual Studio 2015

  Hi all

  I have a problem on my laptop which is the startup screen freezing after installing Hyper-V on Windows Pro 8.1. Actully I need because it is used by Visual Studio 2015 do Andriod device emulator work

  After a search internet I found that this problem is caused by the driver Ralink Bluetooth and common

  I'm also thinking that I can boot windows successfully when I disable virtualization BIOS, so I logged on windows and I have tried a few solutions

  1. Disable Bluetooth device-> does not

  2 - Install the latest Ralink driver-> does not

  3. Remove VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00-> work but the returned key after that restart so I have to delete this key, everytime I open windows, and more that's a problem with virtual switches on Hyper-V

  Any solution permanent please?

  Hello

  Which driver Ralink, have you tried?

  I discovered Mediatek drivers which are no longer updated.

  Not sure if that helps in your case with Visual Studio.

  Here is the link:

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71572.exe

• Vista is sometimes freezing at boot time

  A few weeks ago, I installed some new updates (as well as service pack 2, came to them who I was little surprised, but I went with it). in any case, after the updates installed, I realized that my computer work slower for some reason any. In addition, my computer freezes usually to where I need to stop and restart manually. From time to time, I can start the computer and have no problem, other times, I might have to go through about 3 or 4 manual restarts.

  Tired of it, I decided I'd do a system recovery. He crossed successfully, and everything worked well. I got the drivers, I needed for my other devices and thought I'd be back again to day. Once I did, I rebooted my computer to apply the updates, signed, and less than 30 seconds of activity, I froze again.

  I guess that it is a mistake to update at this point. Help?

  Hi M3lch10r,

  Welcome to Microsoft Windows Forums!

  METHOD 1

  Try to put your computer in clean boot mode and check if the problem persists. To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

  Steps to put your computer in a clean boot:

  1. click on Start
  2. type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. in the general tab, click Selective startup.
  2. under Selective startup, clear the Load Startup items check box.
  3. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. click on OK.
  5. When you are prompted, click restart.
  6. restart the computer two times
  7. see if you are able to boot without any problems.

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  NOTE: TURN ON YOUR COMPUTER TO A NORMAL STARTUP AFTER TRYING THE STEPS ABOVE.

  Click Start, in the search box to start, type msconfig and press ENTER.
  Select Normal startup, and then press apply and OK

  METHOD 2

  After having tried the above method, you can also try any step from the link below to increase your computer's performance.

  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  We would like to hear from you.

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Acer Travelmate 7750 G freezes completely using Windows or Linux (dual boot). Need help please.

  The problem is that the machine freezes completely without apparent reason, on all operating systems, I tried.  "Freezes", I mean there is no reaction to the mouse movements, keyboard presses and start button / stop pressed off the coast.  The gel seems to be at a random time and may occur even when the system is idle.

  The Acer Travelmate 7750 G laptop came pre-installed with Windows 7 and it kept freezing.  The machine has been updated level of Windows 8, 8.1, 10, then dual boot with Linux Mint 17.3.  The machine froze on all operating systems.  I have tested software hard drive, memory, CPU, GPU and they all managed very well.  Is it someone who has knowledge about how to resolve or others troubleshoot this please?

  RESOLVED - I installed a HDD replacement in December 2015 and the laptop Travelmate 7750 G works perfectly since.  Cost me almost nothing compared to the price of the laptop.  No freezing, crashing or anything else!

  Thank you very much for your help.