PC laptop Pavilion 15: freezing boot screen after installing Visual Studio 2015

Similar Questions

• Help with restarting the laptop HP pavilion g6 auto blue screen after installing VMWare Workstation 7/8

  Hello, I have a HP Pavilion g6-1a52nr Notebook PC (running Windows 7 64 bit) which is in a reboot loop. This happened after I installed VMWare Workstation 7 (in the installation process there is no occurs.but error after installing that I try to reboot the machine, and then the following error has occurred).
  Now whenever the notebook starts up, it seems to be in a reboot loop after the windows logo then get a blue screen.
  When I connect to the system using vmware safemode also working.but in normal mode it displays a blue screen after logiin screen shows.

  By turning on the restart automatic system failure off I was able to read it as the Blue error message that says:
  -

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000007e
  BCP1: FFFFFFFFC0000005
  BCP2: FFFFF88006EFF443
  BCP3: FFFFF88003399D68
  BCP4: FFFFF880033995C0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\031212-28672-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-62072-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  
  -
  Can someone give me advice on how to solve and prevent this problem?

  
  Thank you

  you have the HP-tools installed?
  They often conflict with VMware.
  Try disabling the startup of the HP-tools

• After installing Visual Studio have not access to internet - error 651

  OK so I have windows 8 and after the installation of Visual Studio, I can't access the internet, I can connect to wifi but not internet. When I try to connect broadband I get error 651. Please help me I don't want to reset windows because of this.

  Original title: error 651

  Hi Antonio,.

  Are you using a 3^rd party antivirus application on your computer?

  Error 651 indicates the Modem (or another connection device) has reported an error. Refer to these steps in the order in which they are presented, and check.

  • Reset the TCP/IP settings.
  • If you are using a portable computer, make sure that the wireless switch or button is turned on.
  • Replace the RAS PPPoE driver:
    1. Open an administrator command prompt.
    2. Select all the code below, then right-click and click on copy:
    3. TAKEOWN /F "" C:\Windows\system32\drivers\raspppoe.sys".
       ICACLS "C:\Windows\system32\drivers\raspppoe.sys" / grant administrators: F
    4. Right click in the command prompt window, and then click on paste.
    5. Press ENTER.
    6. Once it is finished, close the command prompt.
    7. Go to the following folder:
       C:\Windows\System32\Drivers
    8. Rename the raspppoe.sys raspppoe2.sys
    9. Right-click on the following file and click on save target as / Save link as: old
       RAS PPPoE Driver.
    10. Save it in the folder C:\Windows\system32\drivers.
    11. Restart the computer.
  • If you use a Modem, get the latest driver.
  • Reset your router.
  • Re-install your network card drivers.

  Refer to the following for more information on reset TCP /IP.

  How to reset TCP/IP using the NetShell utility.

  http://support.Microsoft.com/kb/299357/en-us

  Wireless and wired network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   
  I suggest that power you cycling your Modem and router might solve the problem, here are the steps:

  1 save all your current work, close all open applications, then shut down your computer. Wait a minute.
  2. Firstly, turn off your router and wait a few minutes.
  3. turn off your modem.
  4. disconnect all the Ethernet cables are connected to the router and the modem and the PC.
  5. reconnect them and ensure that there is no connection drop between them.
  6. now, turn on your PC and let it boot.
  7. turn on the modem first and once it is initialized, switch on the router.

  For the Windows questions or issues, please get back to us. We are here to help you.

• Pavilion G6 1332el: black screen after installing drivers

  I installed Windows Home Premium x 64 on my HP Pavilion G6 1332el and everithing was very good.

  Downloaded all the drivers for this operating system on the HP Download Page and install them all. I never reboot after each driver installed, so I can not tell you witch cause car my problem.

  After all, I did a normal Shut Down.

  When I powered THE next day, after Windows Logo disapier, only black screen remains.

  I tried VGA output, but my laptop keyboard faield and I FN key on my USB keyboard.

  I'm here, can I di to solve my problem?

  Thank you!

  apashi

  I'm guessing that you have reinstalled Windows from a DVD, right?

  Your PC came with a version of HP OEM of Windows preinstalled, and it is the only version guaranteed to work on this unit.

  You should consider reinstalling using HP recovery media to operate again.  It's a set of DVD and a CD that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/
  
  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Sound of HP laptop Pavilion dv6 does not work after installing SP2

  After the installation of windows vista server Pack 2-32-bit, the sound did not work

  Is what kind of computer? Do you know what type of sound card you are using?

  A suggestion would be to run Windows Update and see if that is a new driver for your sound card.

  Another option, since you said, happened after that upgrade, so I guess it worked before, is to go into the Device Manager in the Control Panel, find your sound card. Right-click and select Properties. Click the driver tab, and then click back to the previous version. Who's going to bring back the old pilot and it can work.

• D'api-ms-win-core-rtlsupport-l1-2-0 lack. DLL after building with Visual Studio 2015

  Hi friend:

  I suffer from this problem of generation. After you install Visual Studio 2015 and update 1, which took 4 hours, and then I built my code. But when I tried to run the executables generated (by vc140), he complains error in debug mode as "the program cannot start because api-ms-win-core-rtlsupport-l1-2-0.» DLL is missing from your computer. "Try reinstalling the program to fix this problem." My OS is windows 7 Service pack 1. I work with VS2013 for over 2 years, never had this kind of problems before.

  Can anyone help to diagnose what kind of problem was it? I ran out of any package during installation? I have looked on another website from google, found no useful information. Also, I installed vc_redist.x64.exe, but it does not help.

  Please help because it crashes me to move further on my coding work!  Thank you very much.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home

  No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home. Any suggestions on how to solve the problem?

  Thank you. This site help me solve my problem.

  http://www.Realtek.com.tw/downloads/ExpressFTPSite.aspx?DownTypeID=3 & DownID = 558 & PFid = 23 & Conn = 3

• Windows 8 HP laptop blocked on clear blue screen after auto repair.

  My younger brother, who has a laptop HP in Windows 8, told me recently that her computer was broken. I turned it on and it works normally with loading points and logo of HP that move in a circle. Then after a few minutes, a brief blue screen appears with a frowny face and a message that says: "your PC has encountered a problem and needs to restart." We are only collecting the error information, and then we'll restart for you. "After that it shows that for about two seconds it goes back to the HP screen where it says now auto repair. Then it goes to a black screen blank, followed by a white light blue screen with which I can see get around and see the mouse. I tried pressing all the buttons I could think of, all the 'F', control + alt + delete, etc, but I can't really start up where it can connect. Any help would be appreciated, thanks in advance.

  Hello

  Check with HP support or a real computer store (that makes its own service in the workshop).

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  You can start safe mode?

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Error: Windows could not start. A recent hardware or software change might have
  problem after installing Windows updates
  https://support.Microsoft.com/kb/2674065

  Try to run the auto repair: (can be run from a Windows disk if necessary)

  How to run a repair 'automatic' to solve the problems of Windows 8 start
  http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.html

  ======================================================

  If necessary:

  How to start on the "System Recovery Options" in Windows 8
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Pavilion DV6 3055tx blue screen after RAM Upgraderei

  The product name and number: HP Pavilion dv6 3055tx

   

  Pre-installed RAM: 3 GB
  

  Operating system: Windows 7 Home Basic 64 Bit (90 days)

   

  Error message (if any): blue screen on startup of the BONE
  

  All changes to your system until the problem occurred: RAM upgrade

   

  In the title of the topic, include a brief and accurate description of the problem and your product information: I use this product for a long time... Good...

   

  One day, I thought to upgrade my RAM, so I ordered "CRS 4 GB LT_CMS04GX3M1A1600C11"

   

  Corsair 4 GB DDR3 RAM simplified eBay India

   

  After I received the product, I open the back panel and removed the 1 GB RAM Samsung and Corsair inserted one I ordered.

   

  After this, I restarted my system

   

  When starting Windows came to loading blue screen suddenly comes and laptop restarting

   

  Then a black screen comes with 1. Launch the tool to restart System 2. Start Windows normally

   

  I gave my chance for both, but the same blue screen.

   

  After that, I removed the two Rams and inserted as a single Corsair

   

  Same blue screen

   

  Then I open BIOS and it says 4096 MB installed memory

   

  After that, I inserted the 2 GB with it means Total two-channel 6 GB

   

  But again Blue Screen and BIOS saying 6144 MB

   

  What is the problem?

   

  Please help me solve the problem.

   

  The eBay seller is ready to replace the RAM, but I want to know if this could be a compatibility issue.

   

  Thank you... Waiting for a good answer

  Hello:

  I can't find any specs on that you bought it from memory.

  Your PC will run from 8 GB of memory, but you must be careful as to what memory you select.

  You must get the PC3-10600 (1333 MHz) memory and it must be of low density.

  You can't get PC3-10660 or PC3-10666 memory and cheap will be high density and will not work in any case in your laptop.

  You can see this related posts with someone who had the same problem, and when he bought the good memory, his problem was gone.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dv6t-3000-RAM-upgrade/m-p/2492127#M17965

  I think you bought PC3-12800 memory and this is probably the high density - two bad things.

• Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

  System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

  Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

  Hard reset has been tried 3 times with no improvement.

  External monitor is connected but no signal has been out of the laptop, screen is black.

  Done a few times this page to reset the BIOS setting blindly:

  http://support.HP.com/us-en/document/c02217843

  BEEPS heard when you press F10 or F5 during procedures. But still black screen.

  What can I try again?  Please advice kindly!

  Hi @ sokw,

  I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Laptop HP 15-f1233wm: white screen after login on Windows 10 HP for laptop 15

  I get a blank screen after login. She wanted to do something. Can you help?

  Hello

  Thanks for posting in the HP Support forum.

  This issue would have occurred because of many things including the recent software updates, virus/malware, corrupted user account profile. To remedy, try this:

  1 Please, shut down the computer using the power button

  2. turn on.

  2.1 as soon as you press the power button, keep hitting the Esc key (such as tap-tap-tap).

  This should open a HP Boot Menu that can resemble the following

  

  3. choose F11 on the keyboard to open the system recovery options.

  The computer should boot from the recovery partition various options you of recovery. Note that the F11 option will work only if the recovery partition is there (not deleted) and intact. From there on, you have prenty of options to choose from.

  Please, perform reset of Windows with the possibility to keep your files and save the settings.

  This will be "Refresh" your windows but will keep your files and some stuff in places

  Here are the details:

  > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html

  I would like to know if it works for you.

• Blue screen after installing SP3.

  OK, I got a laptop the other day of a member of the family... was working fine when I got it I was behind on updates... so I downloaded and installed service pack 3 and when I restarted the laptop I get the blue screen... I tried to boot in safe mode to remove the SP3, but even when I try to start in safe mode I get projected blue...

  Here is the error I get:

  IRQL_NOT_LESS_OR_EQUAL

  Technical information

  STOP: 0X0000000A (0X00000002, 0X00000000, 0X3F3F3F3F, 0X804F9C6B)

  If anyone has a solution to this help please!

  Do what you should have done when the computer has been given to you: format the HARD drive and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get a blue screen after installing windows7

  I have intermittent blue screen of death after installing windows7 home premium on Pavilion m9040n. Can anyone help?

  It is indeed a clean install of windows 7. Thanks for the reply, I solved the problem. The problem is I have a Hauppauge winTV TV tuner card is installed and cela mucks the other pilots on this installation. Everything went well after I got rid of the TV card. It seems that hauppage isn't a suitable driver for their card and windows 7 install their WDM driver for him and it does not. When I try to use the TV card and not a few seconds later, I get a blue screen of death and fans try to work overtime for an unknown reason.

• Blue screen after installing security update KB2419640

  After I installed Windows 7 security update KB2419640, I get a blue screen after reboot and finally do a system restore.  Can someone explain how to get this update to work? I have tried several times now and it installs by is kind of lonely. Don't know what else to do.

  TIA

  See this post in the Windows Update forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10eb9b57-aada-4c49-acf1-b81f016b1ed0

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• STOP 0 x 00000050 blue screen after installing the Windows security update [Vista]

  As the title suggests, after installing an update of security on Vista, I got a blue screen on reboot. Error code 0 x 00000050. I see the suggestions of some places on the internet saying that I have to go in safe mode, but even when I try this I get the error.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft