HP Elite 8100 small form factor: HP 8100 elite Smal, error memory form factor

Similar Questions

• New drive HARD & OS errors-> HP 8000 Elite Small Form Factor PC

  New drive HARD & OS errors---> HP 8000 Elite Small Form Factor PC
  
  Can not install Win XP on another hard drive
  
  I work with a...
  HP Compaq 8000 Elite Small Form Factor PC
  
  Original SATA HDD is loaded with Windows 7 Pro.
  
  In order to install a program using this PC as a digital video recorder
  I installed the video capture PCI card and related software. I had problems
  associated with software and Windows 7.
  
  I know that the software works with Windows XP.
  Do not want to remove the original HDD, I tried my win7
  to replace the HARD drive and do a clean install of XP.
  
  I get the same error during the installation of the OS.  I tried different
  SATA and different XP install disks.
  
  The error I get is shown in this photo.

  

  Original HP HARD drive is a Hitachi 160 GB
  
  I tried 2 known to be good SATA drives.
  Seagate 500GB
  WD 80 GB
  
  I checked the bios settings and even revenue tio rear BIOS
  default settings.

  I get this error even with everything I tried to do.

  This happens during the OS install just after or during the process of the installation of temporary files are current

  written to the HD.
  
  When I re - install the original HD loaded with Win7, everything works as it
  expected.
  
  Any ideas on what] s going on here?

  Hello:

  The problem is that you must incorporate the necessary sata ahci drivers for windows XP to see the hard drive.

  Has Windows 7 and XP is too old an operating system to make them.

  Read the info at the link below, section of Intel and then read the downloadable PDF document for instructions on how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The only other way to install XP on this model is to go into the bios, the storage section and change the setting of sata ahci to ide emulation, save the setting here and once again, when you go out.

  The problem is that if you do this, you cannot change the setting for the preferred setting of DCIS, unless you know how to install the correct ahci sata driver after installing XP from the controller.  If you try to just change the setting back on ahci without having to install the controller driver, the PC does not start upward.

  Try "slipstreaming" the drivers first and if you can't swing, install XP in IDE mode and I'll help you get the drivers installed, so you can change the BIOS to ahci setting.

• 8200 elite Small Form Factor: can I add a graphics card in my computer?

  So I have a HP Compaq 8200 Elite Small Form Factor and I was wondering if you can add a dedicated graphics card. If so, what are compatible?

  Video cards that will be compatible must be discreet and very low power 16 x PCIe video cards.  Low power generally assimilated to the discreet with less than 1 GB of video memory video card. Use these criteria when searching for candidate upgrade video cards.

  The following video cards have been listed as optional and is compatible with your HP SFF PC desktop computer.

  graphics card nVidia Quadro NVS295 PCIe x 16, 256 MB 641462-001

  graphics card from nVidia Quadro NVS300 PCIe x 16, 512 MB 632486-001

  Graphics ATI Radeon HD6350 PCIe x 16 512 MB 637995-001

  Graphics ATI Radeon HD6450 PCIe x 16 512 MB 637996-001

  AMD over-pants 2270 PCIe x 16 graphics card, 512 MB

  Upgrading the PSU to what would be needed for a video game level card is not sustainable for a Mini PC like yours.

• Business PC HP Elite 8100 SFF: Problem upgrade memory with operating system to 64 b.

  I have a small form Factor Business PC HP Compaq 8100 Elite, with 2 GB RAM and Intel Core i5-650 3.2GHz (n ° 2 x 1 GB 240pin DDR3 SDRAM Unbuffered DIMM DDR3-1333 - hynix HMT112U6TFR8C-H9 https://www.skhynix.com/products/computing/view.jsp?info.ramKind=20 & info.serialNo = HMT112U6TFR8C & posM... ) The operating system is Windows 10 to 32 b.

  In the reference Guide of hardware for PC installation additional memory is reported:

  Additional memory installation

  The computer comes with a double speed 3 vivid dynamic synchronous memory (DDR3 - SDRAM) dual inline memory modules (DIMMS).

  DIMMs of memory on the system card holders can be filled with up to four standard DIMM in the industry.

  These media memory are filled with at least one DIMM preinstalled. To obtain the maximum memory support, you can fill out the card system with up to 16 GB of memory. DIMM DDR3-SDRAM

  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:

  • ● standard 240 pins of the industry without buffer non-DDR3-1066 MHz compatible or PC3 - 10600 DDR3 - 1333 MHzcompliant
  • Unbuffered ECC PC3-10600 DDR3-1333 MHz-compatible (Z200 SFF only) ● 1.5 volt DDR3-SDRAM DIMM DDR3-SDRAM DIMMS must also:
  • support the latency CASE 7 DDR3 1066 MHz (7-7-7 calendar) and latency CASE 9 DDR3 1333 MHz (9-9-9 calendar) ● JEDEC SPD mandatory information in addition, the computer supports:
  • front and double-sided DIMMs
  • DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not supported

  NOTE: The MFS 8100 supports 512Mbit, 1Gbit and technology memory non - ECC 2 GB.

  NOTE: The system will not work properly if you install unsupported DIMM

  I replaced the ram 2 with 4 memory 4GB PC3 - 10600 CL9 DIMM 240-PIN - Kingston KVR13N9S8 / 4 http://www.kingston.com/us/memory/search/?partid=kvr13n9s8/4.

  The BIOS recognizes correctly the installed memory (16 GB) and in the OS installed memory is 16 GB (3.49 used).

  To take full advantage of the installed memory has wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  To make full use of the installed memory wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  I also tried to install Windows 7 64B, but after loading the files to start the pc freezes

  Reinstall the original memory, 10 to 64 b windows installs without problem.

  I want to know that is not compatible with the installed memory.

  And if it is possible to avoid having to replace.

  Thank you and best regards.

  @Peppe_Valenza

  I'm not surprised by the response of Kingston.  The issue of density memory was mentioned message #2.

  Try a few other manufacturers of memory and see if you can get the own memory DIMMs.

  Thanks for posting on the forum.

• HP Compaq 6300 small form: deliver the installation of an operating system for HP Compaq Small Form Factor 6300

  I have a HP Compaq 6300 Small Form Factor in which I just replaced the motherboad. It works very well. I can start on a USB bootable and (1) start a Windows 8 or a clean installation of Windows 10. I can (2). boot from a USB drive capable of Linux Mint 17.3 Startup and load that OS fine. When I try the installation of any of the aforementioned OSs (Windows 8/10-Linux Mint 17) they all will get an error of memory or hard drive and the installation at the beginning of the installation to fail. I tried this on two SSD drives and two HDs standard. I am at a loss on what to try next. Any help would be great. Thank you. -Matt

  I have it. It was a bad memory stick.

• Affordable graphics for dc 5800 sff small form factor?

  My PC is dc 5800 sff small footprint with Core 2 Duo 3.0 GHz, 4 GB of RAM. Now it runs with Intel Graphic Media Accelerator 256 MB. I find it difficult to play games (like Pro Evolution Soccer 2015) in full resolution. I'm doing research on many types of video cards, but it seems impossible because of their diversity. Affordable graphics for dc 5800 sff small form factor?

  I've seen a few posts on the forum that says HD 6450 1 GB HP is correct; However, I would like to make 'extra' room 1 GB for the future. And I had Msi Hd 6450 2 GB and Asus Gt 630 2 Gb(GT630-SL-2GD3-L) on the spirit, but do not know if it will market voluntarily on my PC.

  Can you help me and suggestions are appreciated?

  Thank you.

  Hello:

  Food's owner, which means that you can use only one.

  This means that you need to customize a graphics card to work with the existing configuration.

  The GT 610 or HD 6450 should work within the limits of the 240W power that has your PC.

  Each card must be much better than the card integrated Intel.

• HP Compaq DC7800 small form Fa: Nvidia GeForce 8800 GT 512 MB vs. HP Compaq DC7800 Small Form Factor

  Hello

  I'm not too familiar with the hardware upgrades, so I wonder if a Nvidia GeForce 8800 GT 512 MB would be compatible with my HP Compaq DC7800 Small Form Factor?

  Thanks for any help!

  Hello:

  Here is the link to the plug for the GeForce 8800GT...

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-8800-GT/specifications

  Certainly, this card will not work in your machine for two reasons.

  1. he needs a power outlet extra that doesn't have food dc7800.

  2. the draw of the power of the card (105W), is too much for the PCIe x 16 slot 25W prorated and 240W power your PC.

  These PCs is designed for light desktop for administration.

  If you want to add a video card, it must be a down a profile that comes with low profile brackets in the area.

  I recommend the AMD HD 6450 or Nvidia GT-610 low profile cards that will work within the limits of the power supply of your PC has.

• HP Compaq Pro 4300 Small Form Factor

  Can someone help me?
  
  Recently, I just buy HP Compaq Small Form Factor Pro4300
  Product no.: D7L26PA #UUF
  
  Because the program in-house, I can't use 64-bit windows, so I just go down to 32-bit
  now the problem, can someone give me the download link, because I am looking for HP give me too pilot just a chart only I had too many things to download.

  Thousand thanks for help...

  Install it first and restart.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 5257337 & prodNameId = 5257340 & swEnvOID = 4053 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-99187-1

  Install the second and reboot.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 5257337 & prodNameId = 5257340 & swEnvOID = 4053 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-119238-1

  Finally, but not least.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 5257337 & prodNameId = 5257340 & swEnvOID = 4053 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-106711-1

• Compaq DC5800 sff: compaq dc5800 small form factor 4 monitors

  My machine is a Compaq dc 5800 small form factor. Running windows 7.

  Wondered what would be the best way to get four monitors to work on this machine. Different programs of 4 separate monitors 4 on each of them, what graphics card should I buyto achieve?

  I have a usb to vga thing that might work for a monitor, so this means that I need a chart of small form factor card that can work 2 or do I need one that will run 3. I read that once you install a graphics card, you can't activate the onboard graphics in the bios. I don't want to have this problem. Please help me.

  Thank you

  Here is the Manual:

  Manual

  You'll need a card video low - profile pci-e x 16. Even if you buy one with 3 outputs as a vga, one dvi and one HDMI usually you can only use 2.

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=7717576 & SRCCODE = WEBGOOPA & scid = scplp698686 & kpid = 7717576 & gclid = Cj0KEQiAiamlBRCgj83PiYm6 - gBEiQArnojDzV29tsehaj_KoZBvaF_tPNYEd-lz4cTMeNrlTNijXoaAjPg8P8HAQ & gclsrc = aw.ds

  And Yes, when you install an add-in pci-e video card, you will lose the integrated graphics card.

  In order to drive the moire than 2 monitors you need a second video card, or a multiple display adapter cable. You have a pci-e available x 1 slot and there is such a thing as a video card pci-e x 1 like this:

  http://www.Matrox.com/graphics/en/products/graphics_cards/m_series/m9120pluslpx1/

  http://www.Newegg.com/product/product.aspx?item=9SIA4UB1J73800

  Some of these x 1 cards actually have a quad cable optionally, you can add the display.

  These are not for gaming but can run extra for things monitors as having walked fellow RSS site or desktop computers more available to work.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Compaq dc7800p small form f: the upgrade of system model HP Compaq dc7800p Small Form Factor

  Right, I'm wanting to upgrade my ram and graphics card, but I am struggling to understand what I put in and what I can't. I also wouldn't mind research in a new soul who currently use a vpro intel Intel (r) Core (TM) 2 Duo CPU E6750 @ 2.66 GHz, 2660 Mhz. I just want to eventually play some games, but nothing heavy and do some light video editing again once nothing to heavy. Any help would be amazing.

  Here is the complete information of the system:

  Name of the Microsoft® Windows Vista™ operating system business
  Version 6.0.6002 Service Pack 2 Build 6002
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  USER-computer name
  System manufacturer Hewlett-Packard
  Model HP Compaq dc7800p Small Form Factor system
  System Type X 86-based PC
  Processor Intel (r) Core (TM) 2 Duo CPU E6750 @ 2.66 GHz, 2660 Mhz, 2 Lossnay, 2 logical processors
  BIOS Version/Date Hewlett-Packard 786F1 v01.27, 11/04/2008

  I would also like to pass well ten Windows. Thank you

  Hello:

  For a video card, I recommend the AMD Radeon HD 6450 half-height card, which works perfectly with the 240W power supply in your PC.

  Make sure that you get one that includes low profile brackets in the area.

  Memory... you can install a maximum of 4 x 2 GB memory PC2-6400 for your model if you are running a 64-bit operating system.

  I have used this brand in my dc7800 CMT.  I bought 2 games and maxed out.

  http://www.Newegg.com/product/product.aspx?item=N82E16820231207

  Processors... Mine came with the E8300, so I didn't change that.

  Here is the link to the quickspecs for your PC.  You can find taken processors supported on page 9.

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04287277.PDF

• Battery for HP-Compaq-dc5800-Small-Form-Factor

  Hello

  Desktop HP-Compaq-dc5800-Small-Form-Factor

  My computer is quite old.  I would replace the small battery inside.  Can someone link me to a good battery on Amazon?

  HP-Compaq-dc5800-Small-Form-Facto

  Hello:

  The battery you ordered is exactly what you need.

• dc5800 Small Form Factor: dc5800 closes during the night or during the day

  My dc5800 Small Form Factor has been stop under its own when not in use, for example during the day or night. When I restart, I get the black screen where it asks if I want to start normally or in safe mode. After startup, it asks if I want to find a solution to the problem (which does not return anything). It never happened while I use the computer. He did periodically, but lately, it's every day. Help?

  Solved the problem by changing some power settings. for example the definition of disk hard do not stop, pc to never sleep, etc.

  You don't know if it's a good thing or not, but the computer turns off when I'm not using it.

• HP-Compaq-dc7800-SFF: CPU graph Nvidia Compatible to HP-Compaq-dc7800-Small-Form-Factor

  I am a researcher working with PC HP-Compaq-dc7800-Small-Form-Factor. There already RV610 [Radeon HD 2400 PRO/XT] graphics card.

  I want to install CUDA toolkit for parallelism. For this I need compatible GPU of NVIDIA CUDA.

  What are all the GPU NVIDIA compatible with my system?

  I also have computer hp laptop pavilion g6. Are there NVIDIA GPU that is compatible with my laptop?

  If the specs show that it was compatible, so avoid any upgrade of the power supply required.

• How to open an HP Compaq dc7900 Small Form factor PC case?

  How I open my HP Compaq dc7900 small form Factor PC Desktop case? I would like to install a Wi - Fi adapter PCI card.

  Thank you!

  Hi xMattie, you can read the instructions for disassembly for this model here: LINK

  EDIT: Steps 1 & 2 cover how to open the case. Let me know if this helps - I will find additional resources, if it is not.

  

• 'HP Compaq dc7900 small form Factor PC' - 4 TB HARD drive

  The "HP Compaq dc7900 Small Form Factor PC' sees a 4 TB HARD drive?

  I plan to buy a bigger hard drive for my desktop and I would like to know if the "HP Compaq dc7900 Small Form Factor PC" can take a size of 4 TB HDD.

  Maybe you can, but I can't say for sure.

  You will be able to format the disk to the GPT so that windows to 'see' a large partition.

  Read this white paper for more information - page 4 in particular.

  http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c02826744-1%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken