HP elitebook 8440p: lack of device system basis and RICOH Bay8Controller driver
I recently installed 10 64-bit Windows for my Hp elitebook 8440p and I now have the above-mentioned missing drivers.
my device coordinates are:
Base system device.
PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C & REV_14
PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C
PCI VEN_1180 & DEV_0843 & CC_088000
PCI VEN_1180 & DEV_0843 & CC_0880
for RICOH Bay8Controller;
PCMCIA\RICOH-Bay8Controller-F1B2
PCMCIA\RICOH-Bay8Controller-0000-0000
PCMCIA\RICOH-0000-0000
Kindly help.
Hi, @Huffer :
No need to get involved.
This is the solution. This driver installs all of the missing devices listed.
Tags: Notebooks
Similar Questions
-
EliteBook 8440p: lack of drivers for the Ricoh Bay8Controller and Base system device
Hello
In the Device Manager my EliteBook, under the heading other devices, I have the 2 below devices for which no driver is installed. What are and how to upgrade drivers (Windows cannot find drivers)?
- Device base system with hardware ID:
PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C & REV_14
PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C
PCI VEN_1180 & DEV_0843 & CC_088000
PCI VEN_1180 & DEV_0843 & CC_0880
- RICOH Bay8Controller with hardware ID:
PCMCIA\RICOH-Bay8Controller-F1B2
PCMCIA\RICOH-Bay8Controller-0000-0000
PCMCIA\RICOH-0000-0000
Thank you for the support!
Hello
Try this link
-
EliteBook 8460p: lack of device driver on my hp elitebook 8460p base system
I can't locate my base system device driver. These are the listed hardware ID. can someone tell me please how to get this driver? Thanks in advance.
PCI\VEN_197B & DEV_2392 & SUBSYS_161C103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_161C103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880
Hello
Download and install the driver from the following link card reader.
Kind regards
DP - K
-
Hello
My laptop computer in question is a HP Elitebook 8440p
Just upgraded to Windows Pro 10 x 64, and I managed to find the drivers for all of them, except a device.
Under >
> Sound, video and game controllers
-"High Definition Audio Device".
It has a hardware ID of:
HDAUDIO\FUNC_01 & VEN_8086 & DEV_2804 & SUBSYS_80860101 & REV_1000
I already tried to install:
-IDT Audio Drivers
-LSI High-Definition Audio (HDA) Modem
-Intel Chipset Installation utility
None of the foregoing has managed to get rid of the yellow exclamation power off the device under the Device Manager view.
I had a few other devices where win 10 has not installed by default, and for drivers Win 7 seems to work very well, so I guess that the same is true with the one above - I just need to know what to install...
Any help would be appreciated. Thank you.
Hello:
You must manually install the audio driver Intel HDMI driver W7 Intel HD graphics support page for your laptop.
Here is how to do this without messing up your graphics driver...
First download and install this free utility for files... 1 file on the list is 64-bit.
Then, download and save the graphic driver Intel support page for your laptop. Do not run it.
After downloading the above driver file, right-click on it and select 7 - zip from the list.
Have 7-zip extract of: and leave it to decompress the file in the file name (sp64360).
Once this is done, go to the Device Manager and click on the audio device HD requiring the driver.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and find the driver 7-zip created folder.
Make sure that the include subfolders is selected and the driver should install.
Then restart.
-
HP Probook 4730 s system device base and network controller driver
Dear employees of Hp,
I have install on my HP Probook 4730 s new Windows 7 Ultimate and I cannot find and install the base system device and network controller driver.
Can you help me please?
Kind regards
Robert
Hi, Robert:
Here is the link to the wireless card driver you need...
Best regards
Paul
-
I used VMware Converter to create a virtual machine from an existing Windows XP Pro (32 - bit, SP3) installation. I ran that virtual machine in VMware Workstation 6.5.1. He gave me new hardware detected for two assistants: System of Base and video controller (VGA Compatible) device. I was not able to find the drivers or otherwise go beyond FNH assistants for these two devices. At the present time, both appear under the heading "Other devices" in Device Manager with yellow exclamation next to them circles. Video response is slow. I don't know what Base system device refers, so I can't say if it is efficient. Any ideas how I can install or update the drivers of these two? Thank you...
You already have everything you need. There are 5 or 6 ISOs in the folder my computer. This is the VMware Tools installation disc - one for each family of the guest operating system. Check that you have specified the correct guest OS in the settings of the virtual machine (Options-> general). Then use the menu to install the VMware tools, when the guest operating system is loaded and recorded. Then, inside the prompt, access the CD-ROM drive and run the Setup installer.
-
EliteBook 8440p: lack of drivers
My system is missing Base system device. I tried to search the official site of HP, but it does not appear there. My OS is Windows 7 Starter. I tried to update, but it is not updated.
I need quick help.
Hello
Install the driver from the link card reader.
http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46972.exe
Kind regards
DP - K
-
HP EliteBook 8440p: lack of drivers after reinstalling Windows 7
Hello
I reinstalled Windows 7 and now got a number of missing drivers. Please redirect me to the download URL.
Base system device
PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C & REV_14
PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C
PCI VEN_1180 & DEV_0843 & CC_088000
PCI VEN_1180 & DEV_0843 & CC_0880PCI Simple Communications controller
PCI\VEN_8086 & DEV_3B64 & SUBSYS_172A103C & REV_06
PCI\VEN_8086 & DEV_3B64 & SUBSYS_172A103C
PCI\VEN_8086 & DEV_3B64 & CC_078000
PCI\VEN_8086 & DEV_3B64 & CC_0780Unknown device
REV_0072 & USB\VID_138A & PID_0007
USB\VID_138A & PID_0007Please indicate the sequence of the driver installation (if there are any specific applicable in my case). Thank you!
Ekaterina
Hello
In the order of validation, the drivers that you need are:
http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095874&swItemId=ob_79317_2&swEnvOid=4059
Kind regards
DP - K
-
I just installed the new hard drive for my laptop and will get the cards of two memory installed tomorrow. I would like advice on what would be the best option to start when the laptop for the first time I'm on fire.
I have the original Windows HP recovery disk came with the computer.
I also have a recovery disc and a system image on disks created with Macrium Reflect two days ago.
I also have a recovery disc and a system image is created on an external hard drive Seagate two days ago. (I've read mixed reviews on these is currently working as a media of rescue with Win7 Pro).
I guess if I use the HP recovery disc I would be then just use any system image I prefer, without the recovery disk. Anyone know if it makes a difference at all which method to use?
My recommendation would be to restore using the image of MR (Macrium Reflect) you did.
But then, I used Mr. on all my PCs for years and am a big fan - having had it Miss ever in the years and years of use.
You will need boot from the boot of MR media (you did that right) and, if you photographed all the required partitions for the operating system, restore it on the new drive should take a few minutes, and when this is done, you reboot and everything should be OK.
Good luck
I'm a volunteer and I do not work for, or represent, HP.
========================================================================
If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information. -
LR CC - lack of device profile photo and goal
Ladies and gentlemen, can any CC LR expert review and help solve this missing link of camera lens profile?
I use PS & LR CC on Thinkpad X220T, win 10.
I use the following devices: Nikon D7000, Pentax K50, Lumix G5, Olympus EP2.
I understand Lumix G5 and Olympus are cameras MFT & LR does not have lens correction for the MTF.
LR CC provides profiles of Pentax camera lenses, strangely PS CC is able to detect the K50 Pentax with Pentax lenses.
It shows the screen next with related brands without camera - Apple, DJI, GoPro, Huawei, LGE, Parrot, Yuneec.
Is it possible that get rid us of all these unknown brands and replace by brand lenses real camera.
Tried the Setup of customs, he doesn't seem to find any profile online or YouTube.
Also links on how to create your own profiles to camera lens seems to be not for the layman.
Maybe PS & LR modules communicate, even if they reside in the same folder.
Appreciate your kind and expert advise.
Kind regards
Anthony Yong
The list is OK - it are trademarks of supported lenses: lenses supported
Cameras FT make correction automatically with built-in profiles: work with lenses in Adobe Photoshop, Lightroom and Camera Raw profiles
Please also note: there are profiles of separate lenses for raw and non - raw files. Photoshop, Camera Raw and Lightroom only display the profiles available for the file type of the selected image.
Most of the profiles are available for Raw only.
-
No device found Boot and a hard drive to sleep
Hello
I bought an Acer Aspirve V3 - 771 G - 736 b 1287, and he is now 6 days.
I have 2 drives here. An SSD and HDD (http://img59.imageshack.us/img59/4384/setupb.png)
Monday, I had my first problem with the laptop.
When I tried to boot up the laptop, he gave me a warning "not found no boot device, press a button. So I went for the first time and all bios reset default settings.
Everything was fine until today. I encountered the same problem ("' not found no boot device, press a key" ") and tried to reset the BIOS to the default settings, it did not work. Then I spend 2 hours of switching things around in the boot order and change the boot mode in the UEFI. This did not help. But suddenly, I noticed that "windows boot manager" pop up in the order of precedence of Lout. Now, I was able to start the laptop again.
Now I find that really odd because he said my HDD0 is the HARD drive and my HDD1 is 'empty '. I think it should be HDD0 is SSD and HDD HDD1.
This screenshot shows how my boot order is at present (in this order, my laptop starts): http://img689.imageshack.us/img689/1796/20130313195830.jpg
---------
Now I have another problem, and it is with the hard drive. I noticed that when I don't do anything that my hard drive stops spinning (it stops turning after about 5 seconds of inactivity and goes into a 'sleep' mode). Now when I continue work on the laptop freezes the action I want to perform and the towers of the HDD upwards, it takes 2-3 seconds. When the hard drive is still spinning once the action is executed without lag. It's as if the hard drive needs to read before that the laptop can continue.
Kind regards
Krotar
I found the solution to the issue I described in my previous posts.
I'll put my answer here for people who might encounter the same problem.
The BIOS is defined as mode of UEFI and UEFI mode is to give readers a few problems with the connection to remedy, you need to install your OS in LEGACY mode.
To do this follow these steps:
-Backup all your files
-Go into your BIOS (f2 when starting to spam)
-Change the UEFI in LEGACY mode
-Reinstall windows on the correct drive (your solid state)
-Enjoy
I will mark this as a solution and I hope that this topic will not be deleted because there a lot of documentation in it.
-
I have a Windows 7 Ultimate active computer that was swarming (STRONGLY) of malware/virus/junk files/adware...
I think I have cleaned out, but want to do a clean to be sure install, but I have no partition recovery (may be erased by a virus?) and no recovery dick.
I went to the Microsoft website and entered my product key. He has been recognized as Windows 7 Ultimate, but when I had to choose a language, English was not available.
Any solution, or should I continue to use the computer and all hope is clean?
EDIT - I installed the windows 10 (using an ISO image) on Windows 7. I do not enter the product key when asked (the program said I could jump at this stage of the installation). Installation went well.
I then checked to activate Windows 10 - it activated without any difficulty.
I will now try a clean install...
For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.
It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.
Given that this option is no longer available, what are your options? See the article for more details:
-
Help me with lack drivers basic system for Parvillion dv4-1413xt Entertainment Notebook PC
Dear company,
I currently have 3 drivers system missing or not installed Base and 1 unknown driver missing or not installed this com.
My laptop is a HP Parvillion dv4-1413xt Entertainment Notebook PC with an Intel Centrino 2 processor / 4 GB RAM / 320 GB HDD.
I had all the base drivers like the keyboard, SD host adapters, sound, video and game controllers, system, network cards, graphics cards drivers...
If anyone of you happen to know what these devices are, and where I could their readers in question please let me know!
Thank you
3 base system are related to the card reader... IF you have changed to Windows 7, here is the link for the driver... ftp://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45212.exe
On the unknown device, it would be great, I can get the ID of the hardware it...
-
EliteBook 8440p: HP Elitebook 8440p BIOS
Hello
Last week, I checked the updates to the bios for elitebook 8440p of the of my father and I saw 2 different entrances, f.13 (2011) & f.50 (2014). Subsequently I have updated BIOS F.12 F.13 to without any problems.
I hesitated to update with F.50 because when I checked the F50 revision history, I saw that this goes back to F.21, nothing is mentioned about F.1* series.
So, is it safe to update with F.50 or is it for some other versions of 8440p (if there is)?
Thank you.
Hello
Thanks for posting on the HP Forums.
To get your question more than exhibition I suggest you post in the trade forums since the Elitebook 8440p is a commercial product. You can do so here: laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE
Support of your product page can be useful in the meantime: HP EliteBook Notebook PC 8440p
I hope this helps!
-
Hello
Last week, I checked the updates to the bios for elitebook 8440p of the of my father and I saw 2 different entrances, f.13 (2011) & f.50 (2014). Subsequently I have updated BIOS F.12 F.13 to without any problems.
I hesitated to update with F.50 because when I checked the F50 revision history, I saw that this goes back to F.21, nothing is mentioned about F.1* series.
So, is it safe to update with F.50 or is it for some other versions of 8440p (if there is)?
And if it is safe then why I see both F13 and F50?
Thank you.
I see, my bad. I remember seeing some people by the name of HP, so thought they were the HP guy.
If I understand correctly in order to get the support I need to have a guarantee, right?
If so, he has been out of warranty for years.
While you have anyhing in mind outside throwing the die with F.50?
No idea why two separate files from the bios? Do you share my concerns?
Maybe you are looking for
-
When I accepted the lightning, most of my emails disappeared: what should I do?
I guess that Thunderbird has been updated automatically, and this time, the lightning came with it. I accepted this calendar and thought everything was fine. However, when I got to send an e-mail, I discovered that only emails visible were those of 2
-
What wrong with the search bar?
Firefox is seriously p * ing me off today, what's wrong with the browser, it serves to be one of the best, now an absolute piece of software of the waste processed sound. Anway my problem is, AFTER upgrading firefox, I can't use my SEARCH BAR to look
-
USBTMC: host constantly sent in bulk OUT packages
Hello We develop firmware for a new device TMC. Device is listed as a class IIA successfully [see: 1_WinDeviceMgr.png] At this point, the firmware is at a very basic level with EP control manages all standard applications (get capabilities is not yet
-
Apparently, I need something called a "connector plug-and-play" so I can use my pedals to navigate through a test of medical transcription dictation using Express Scribe for audio and Windows Media Player to the foot pedal. I don't know if I have all
-
After that I upgraded to the mavericks can't send fax from applications
After I updated my system software of Apple OS X (10.9.2) Mavericks my HP Officejet Pro L7780 will not send a fax from MS Word, and I can not install a fax printer in the system prefs.Could someone please help with this question