HP EliteBook 8460p: BIOS Application Error (501) missing or Currept

Similar Questions

• Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

  Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

  http://h30434.www3.HP.com/

• EliteBook 8460p: BIOS reading the lowest possible SPD, goes for 665 instead of 800 Mhz.

  Hello!

  I have improved my Elitebook 8460 to 2 x 4 GB DDR3 RAM 1600 S0DIMMS by Corsair. They work well and save things fortunately in Dual Channel Mode.

  But for some reason the RAM does not work at full Spec. I've not found in my stock all parameters memory BIOS. (F.61 Rev., updated)

  Strange thing, this is the timings are disabled as well. I don't really ask the cl9 here thing, but 800 mhz instead of 665 would be great.

  I'll provide screen shots and I hope you can tell me whats wrong with my ram!

  Thanks in advance!

  

  

  Hello

  From the Manual:

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04287335.PDF

  Memory
  Standard: DDR3 SDRAM PC3-10600 (1333 MHz)
  Two SODIMM slots of socket supported dual channel 2 GB, 4 GB and 8 GB SODIMM memory
  Maximum
  Expandable to 16 GB with 8 GB SODIMM in slots 1 and 2
  Two-channel
  Maximized dual channel performance requires SODIMM of the same size and speed in the two lots of memory.

  Very simple answer: you have a fast car that takes place on a highway that is controlled by the police and forces you to use a lower speed.

  Kind regards.

• EliteBook 8460p: BIOS password problem

  I wanted to make my starting the computer from a USB/CD/DVD key, but there is no option to do so.

  There is a BIOS password on the computer

  It is entered incorrectly 3 times. No 'CNUxxxx' code is seen, only "system locked, please restart" or something similar.

  S/N, UUID

  Spoiler (Highlight to read)

  Info private

  S/N: CZC14223VV

  UUID: 89A0EC9929F9E011BF8F08058F06A082

  Private S/N: CZC14223VVUUID info: 89A0EC9929F9E011BF8F08058F06A082

  Hello

  Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

  If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  Kind regards

  DP - K

• BIOS application error f310

  At the start, I hit f10-display options-shot recover efi-next screen select file system but don't know where to get this

  You can find your configuration information from the BIOS here:

  http://support.HP.com/us-en/document/bph07110

  When you ask about a problem, it is always better to inform the brand and model of your computer with the version of Windows you are using.

• Compaq Presario CQ57: bios error 501

  What should I do to get rid of this problem?  Please help me someone.

  Welcome to the community of HP @ANAKONDA support,

  Thank you for joining on the HP's Support Forums! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support.

  I wanted to join you and help! I understand that you have a problem with an APPLICATION (501) BIOS ERROR on your Compaq Presario CQ57 laptop PC.

  Remove all USB devices. Disconnect all non-essential devices, because they can cause some problems.

  Try starting your laptop normally after having disconnected all. If that does not solve the problem, please continue with troubleshooting.

  The next step would be for you to try to restore the BIOS. You will see that the document says:

  If the BIOS of your laptop becomes corrupted, and a failure to upgrade the BIOS or damage caused by a virus, the computer can display all the following symptoms:

  • The computer displays the error message from the BIOS APPLICATION ERROR 501.

  After restoring the BIOS see if you can start the computer normally.

  Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. Remember to mark this message as an acceptable Solution if it solves the problem for you.

  To show recognition for my efforts please click the Thumbs Up below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Have a wonderful day!

• BIOS HP (501) Application error

  I get this Application error BIOS HP (501) every time I try to load the bios this need to I do? I have the hp pavilion dm1-4010us windows 7 Home premium 64-bit thank you

  Later try one here.

  http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55746.exe

• HP Pavilion Notebook: Mfc120u.dll AcceleratorSt.exe - system file missing error and BTServer.exe - Application error

  I get the error message "system error AccelerometerSt.exe) mfc120u.dll is missing.  I was not able to find a reference to this dll missing accurate regarding the AccelerometerSt.exe.  It seems that the AccelerometerSt.exe is the HP 3D DriveGuard software.  In my view, that an update has been installed.  How can I fix this error?

  And also I can find an Application error error - BTServer.exe

  Please give some solutions to this problem...

  Hello

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  Once done, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Yet once, once done, reboot the laptop.

  Kind regards

  DP - K

• ORA-12012: error on auto work 754461 ORA-29279: SMTP permanent error: ORA-29279: SMTP permanent error: 501 Syntax error, command parameters "RCPT TO:" ORA-06512 unrecognized or missing: at "SYS." UTL_SMTP", line 20 ORA-06512: at"SYS." UTL_SMTP.

  Hello

  
  

  I get below error frequently in the log database alerts.

  
  

  ORA-12012: error on auto work 754461

  ORA-29279: SMTP permanent error: ORA-29279: SMTP permanent error: 501 Syntax error, command parameters ' RCPT TO: ' unrecognized or missing

  ORA-06512: at "SYS." UTL_SMTP", line 20

  ORA-06512: at "SYS." UTL_SMTP", line 98

  ORA-06512: at "SYS." UTL_SMTP", line 240

  ORA-06512: at the 'APPS '. EIS_UTIL_PKG', line 94

  ORA-06512: at the 'APPS '. HKD_PO_ADDON_PKG', line 110

  ORA-06512: at line 1

  The syntax error comes from the SMTP server, not to the job itself, so I disagree with your solution.

• My laptop HP application password BIOS Fatal Error Code: 77005065

  Help, please

  My HP laptop is also asking password BIOS Fatal Error Code: 77005065

  Try

  68963061

• HP Elitebook 8460p: is my power supply dead/dying?

  OK, so for Christmas, I got a HP Elitebook 8460p. Everything was fine, except that on the 3rd day, something terrible happened.

  Day 1 (Christmas): the laptop set up, new installation of Windows 7. Minor only freezes occor all seconds for half a second about. "Upgrade Bay" does not work, made just 2 short grinding noises when closed after opening

  .

  day 2: even freezes. That night, I run a disk check before going to bed. (Don't ask me what are the results, because I fell asleep during the test)

  Day 3: incredibly slow Windows now. Starting about 15 minutes, and answers may last from 1 to 5 minutes, never even.

  Symptoms: my HARD drive light is constantly on, however I ran many tests my self and even the player was tested for possible errors and he spent everything. Running Windows from a disk external DRIVE is fine and going at normal speed (for an external that is). When I push the switch down to close the laptop, there is a sharp wail (only half a second). My internal battery cool and is holder of a load at normal speed, only when the internal HARD disk needs accesed for anything on any platform, it's very very slow.

  What I tried:

  Defrag: Windows disk shows the fragmentation of 27%, however any attempt not to defragment that lead to progress stuck at 0% defragmented.

  SeaTools: Spent Seatools smart test.

  Reseting BIOS: BIOS reset by using the option in the BIOS.

  Store testing: took the laptop computer to the store and paid $20 for them to test, it passed all tests.

  Auditor of Windows errors: found mistakes (I've marked recovery of bad sectors and fix file system errors) and fixed (I have this on the external HARD drive that was running windows 7).

  If this is not the power supply, I have no idea of what is more. Assistance to access the drive HARD internal from the external windows copy is still slow, so there is nothing to do with the problems of corruption or OS driver I know. If you need more technical info let me know. I really don't care about the short freezes more, I just want to be able to use my new laptop if anyone can help me identify the problem I love them. I'm just suspecious of the PSU now because of her crying when being cut.

  Well, after reciving absolutely no help on this subject, I finally concluded that my HARD drive is indeed bad. I took it on my laptop, it was hooked up to my office, it's still slow respondent (although a little faster) and the HARD drive is also still on. The only reason why I come back to this post is someone else do it who is having these symptoms:

  -HARD disk always turn on.

  -HARD drive passes all the tests.

  -Great answer/access times (for me, it would take an hour or more just to get windows 7 booted up and logged).

  -No real lag, just windows waiting on the HARD drive.

  -Crazy waiting for HARD disk defragmentation time (Mine was going to take a week + and there by about 33% fragmentation)

  -Small amounts of offset or "stutters / hiccups" than occor all few seconds (about once every 3-4 seconds for me) (this applies only if the HARD drive worked before).

  -A small, short, high-pitched shrill when the computer is forcibly stops using the power button.

  My HARD drive exposes all of these symptoms. If your HARD drive is having these same questions, sorry to say, but you'll probably have to get a new HARD drive or get an SSD. The good news is that HARD drive prices have fallen since SSD majorly became public.

  42 people have seen this post but not one bothered to even try to help. I am very disappointed.

• EliteBook 8460p: Elitebook 8460p

  Hi all

  I have a damaged on my Elitebook 8460p screen and I connected to an external monitor. The display works fine when windows loads but I can't enter the bios as it shows nothing, until the Windows loading screen.

  Is there a setting I'm missing?

  Thank you

  Arthur

  Just in case someone is having the same problems, I discovered that the bios is built like that and it is not editable. It only allows you to use the secondary display if the lid of the laptop is closed (in BIOS only).

• HP divided x 2: BIOS Checksum Error (502) HP Split x 2

  A couple of days, I turned on my laptop (product number: G6Q88UA-#ABA) to see a black screen with white text saying he had a (502) BIOS Checksum error and press ENTER to reset the values and continue with my system startup. Once, I have to update to the current time. As the days passed, I noticed that I was unable to turn on my laptop without plugging it into the wall, and disconnect it would cause my computer turn off and therefore lost all of my work (and time settings). My poking around led me to him or the other being the CMOS battery, or a corrupted BIOS. I believe that my BIOS is up to date, and my model does not appear to be a CMOS battery.  Can anyone help? Thanks in advance.

  Hello @MValdiv,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I came across your post about the BIOS and wanted to help!

  I have not seen a BIOS update for the operating system Windows 10 of your product.  You can try to install the BIOS for Windows 8.1.  Also, try to review the following document and let me know how it goes: HP PCs - BIOS HP Application selected is corrupt or missing

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great day!

• new openens tab, then close, error 501

  Impossible to go to web pages. says error 501 404 missing. Go to Explorer and it market what do I need to fix firefox

  If a tab closed by itself after its launch, this may be caused by a script on the page or a pop up late or adblocker, thinking it's a junk page. Can you check your extensions to what it is in the same direction and check its Options button? In addition, if you have not updated the extensions for a while, it's worth a try.

  Firefox orange (or the Tools menu) button > addons > Extensions category

  Firefox orange (or the Tools menu) button > Add ons > ' gear' icon > check updates

• EliteBook 8460p: DisplayPort does not connect

  I connected my new HD monitor via the VGA input with no problems.  When I connect the laptop to the monitor using a DisplayPort adapter to DisplayPort cable and the monitor DisplayPort mode no connection is established.  My graphics cards are DameWare Development mirror driver 64 bit and Radeon HD 6470 M.  The monitor is an ASUS VE278Q. Is there a setting on the laptop that I need to activate the DisplayPort?  I guess that the cable connection should be sufficient for the monitor to the laptop.  Any help is very appreciated!

  

  Hello pmoo,.

  I have also an Elitebook 8460p (AMD Radeon HD 6470 M GPU) running Windows 7 (Enterprise), with an external HP 2511 x, LCD and * only * crossed a sceanrio simliar you did: I had problems to get a picture on my monitor when connected with a HDMI cable.

  To clarify, I actually use a docking advanced (230W) which has connections 2DVI & 2DisplayPort at the rear; I use one of these DisplayPort connections with a DisplayPort-> HDMI dongle to connect my HDMI cable to the monitor. If you connect directly to DP your laptop, this behavior * should * be the same...

  First of all, let me start by how I 'fixed' my question (your mileage may vary):

  1. I still think that it was a timing issue with me: the monitor and the laptop should be ISOLATED. Connect the cables; Turn on the laptop first, but make sure that the lid is CLOSED. THEN turn the monitor on.
  2. Have the most recent drivers can't hurt; Make sure that you install them before connecting the external monitor.
  3. CABLES CABLES CABLES!   Always check the wiring and try another HDMI cable if you have one.
  4. Make sure the connections themselve are nice and safe: in my case, the HDMI connection on the monitor was a bit sloppy (brand new monitor).
  5. And just stick to it... (im also confused as to why it took so long... > I spent 4 or 5 hours until what it worked..).

  Now, let me detail that I got here:

  My connections: I had my system & monitor off, and after removing my my docking station DVI connector and the monitor, I plugged my DisplayPort dongle to my dockign and plugged the dongle to the monitor using a HDMI cable. I fed my monitor & notebook (with cover open notebook in case I had to update the drivers, activate something, etc.).

  Tried to activate the mointor: I right click on the desktop to open the control/display panel / 'Screen Resolution' UI and interpreted by "detect": nothing: he showed the "integrated monitor' for the laptop and a generic monitor, but I don't see my monitor HP 2511. I have done several times, and finally, after some trial and error the right monitor #2 (HP 2511) appeared as a second monitor.

  I tried to "Extend desktop" for two monitors; but this only * partially * worked; I could see that the mointor received a signal because she was out of 'sleep' (the power light went from orange to blue (active))... but there is no image on the monitor (!)

  I've then updated the software and drivers for my laptop for the latest news from hp.com for laptop (3.20 - 130911 A - 164036 C (20 December 2013):)

  Note: "solves a problem where the system does not detect external displays properly when the system is connected to a docking station with 2 attached external displays and the lid is closed the system."

  Well, I said: nothing to see new drivers... so I installed them.

  However, even after installing the drivers, no. picture on the screen... I saw that it was getting a signal (did not sleep), but does not display anything.

  NOTE: I did this with my laptop open cover...

  I have so I checked the wiring; Brand new DisplayPort HDMI cable...... quite new dongle so I reversed the HDMI cable, tried another cable...

  Yet, nothing...

  Finally:

  • Back to the 'screen resolution' UI, this time I made sure that the Office was NOT extended to the #2 monitor (external monitor).
  • I have powered off the COAST of the external Mointor (I could here the PnP event for the monitor).
  • I have closed the lid of the laptop.
  • Double check all connections again (and again! they are capricious!).
  • I then On the external Monitor; I heard the PnP event for the monitor... and... PHOTO!  The external mointor now had an image.

  I hope this helps... it of just me and not of HP.