Cannot get Satellite L655D-S5050 reinstall W7 with discs of Geek Squad

Similar Questions

• Satellite L655D-S5050 - cannot install Win 8 due to lack of driver SATA HDD

  Hello!

  I would like to reinstall the operating system on my laptop.

  I've never had problems with this before. I am trying to install Windows 8.
  And the problem is that it asks me the HARD disk driver.
  First of all, I changed in the BIOS in compatibility mode.
  And that did not help.

  Then I downloaded the drivers for my laptop chipset on the Internet, but it did not help.
  Then I thought it might be a problem with the HARD drive. So I formatted completely. But it did not help either.

  Where can be a problem? Or maybe I'm doing something wrong?
  Thank you!

  Post edited by: vadimmelnyk

  Hello

  I think that the Satellite L655D - S5050 (PSK2LU) supports graphics AMD (ATI) and chipset.
  This means that the ATI driver package contain the SATA driver files.
  I found the driver on the Toshiba page here we [Satellite L655D-S5055 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2711088& rpn = PSK2LU & modelFilter = L655D-S5055 & SelCategorie = 2756709 & selFamily = 1073768663]

  By the way: why n t make a Win 7 to 8 upgrade as described here:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletin.jsp?soID=3437733

• Satellite L655D-s5050: PXE - MOF: exit Intel PXE ROM. No boot device

  Hello

  I have a laptop Satellite L655D-s5050 running windows.
  When I put the power, instead of get a toshiba logo, I get a black screen with the command prompt and a few seconds later the following messages:

  Intel UNDI, PXE - 2.0 (build 083)
  Copyright (C) 1997-2000 Intel Corporation

  For Atheros PCIE Ethernet Controller v2.0.1.9 (15/12/09)

  Check the connection of the cable!
  PXE - MOF: Exit Intel PXE ROM.
  No boot device - insert boot disk and press any key.

  When I insert a bootable Windows 7 DVD, the installation process runs very slowly and never ends...

  How can I fixed this problem, if you have an idea, please share it with me.

  Thank you

  Hello

  Message PXE is a typical sign of a malfunction of the HARD drive.
  Why? Because the laptop is trying to boot from LAN.
  Why LAN?
  Because other bootable devices have not been found.

  I would recommend so check the first page of the BIOS. If the HARD drive is not listed, this means that the HARD drive is faulty and should be replaced.

• Cannot get Satellite Pro L450 - 17L to start

  I have a firefighter who bought his TOSHIBA SATELLITE PRO L450 - 17L at the Qatar.
  On the merits the tag said TOSHIBA EUROPE GMBH

  I am an AMERICAN with a US POSTAL SHIP ADDRESS AND billing address.
  WE ARE all TWO IN AFGHANISTAN working as contractors WHERE the SHIPPING ADDRESS APO, AE!

  My situation is as follows. HIS COMPUTER BE BROKEN because WHAT THE DUMB * $$ tried to update his own laptop computer using a PIRATED Windows & Ultimate (I think)

  I can't get the darn it at startup. This bloody 'thing' keeps telling me that there is no START. EXE file. SO I tried to recover the hard disk with the Recovery Wizard. NADA.

  Can anyone tell I'M FRUSTRATED?
  Yes. I tried to order the online recovery disk. I'm NOT in THE United Kingdom. THE COMPUTER WAS SOLD OUTSIDE THE UNITED STATES. UK don't WILL NOT RECOGNIZE APO, AE for shipping address MUCH LESS the ADDRESS of BILLING being in TEXAS!

  I'm about to be bald. Can anyone help?

  Hello

  It seems that the recovery disks for European Toshiba, laptop models can be shipped to countries in the EMEA region only.

  However, you can try to install the Win 7 OS own on this laptop.
  Pilots and missing tools may be downloaded from the page of European driver of Toshiba.

  What do you think of this?

• Cannot get Satellite A300 works well

  Hi all,

  I've had many, many problems with my computer brothers laptop for a while now. It is a Satellite A300 (PSAGCA-06P01Q), and initially the laptop worked quite well.

  However, he started a lot of freezing. Whenever we wanted to install a program, (on this occasion AVG 8.0) or go into Control Panel, computer or documents it would freeze, pretending because the computer was not enough performance to do the job. The green roof bar where it says computer near the top of the pop up computer would charge right at the end, as to say he had finished loading, and then it would freeze.

  CTRL + Alt + Del will not work, so the only solution was to hold the power button. However, after a reboot is exactly the same thing. So I decided to return to the widget factory settings recovery, and who went all well, until exactly the same thing happened again. If Vista can't be the problem. I also tried the system repair, (continuously pressing F8 at the beginning of boot), but who gave no positive results.

  However, I had a module of RAM Kingston 2 GB provided with the laptop, and because of the slowness of the computer, I decided to install the RAM. Everything is perfect to the BIOS screen saying it had 4096 MB of RAM (with 2GB) before, which went well. However, try so that it starts properly, after that the green bar under icon Windows finishes loading, a blue screen appears saying something (he went to fast to know what it says), then restarted the laptop.

  Laptop recommended to go to the repair of the system so see if there was any problem with the Vista boot but he came to nothing. So I decided to make aging system recovery to factory settings, but know that I can't do anything because a box comes up saying what operating system to correct, but there is no edition of Vista Home in the box. It says load drivers, but I cannot locate and files.

  Any help will be much appreciated. If you like more information just responds. XD

  Cheers, Hellas_

  Hello!

  This looks like a hardware problem, because you have already tried to recover the laptop using the Toshiba recovery disc.
  So I think it might be a problem of a RAM or HARD drive, but I do not know Mr. in your case, I'll try the gear tests posted by Akuma. I know that two tests and they are very useful to identify an error RAM or HARD drive.

  In addition, I think that the new RAM is not compatible with the laptop or it s faulty. Have you tried to recover the laptop using the old RAM?
  Maybe it works.

  Sorry, but for the moment I can say more about it.
  Try everything what we have posted and give us feedback.

  Good bye

• various error messages - cannot get old matrix printer that works with xp for the printer in windows 7

  I have a new pc with windows 7 - I have an old panasonic kxp 3696 PARALLEL port printer that works fine with xp - I bought a decoder directional bi to convert the port PARALLEL to the usb port and is connected to my lenovo m81 - computer came with pre installed epson fx series 1 136 driver in the Inbox (this is the driver of windows 7 recommended by panasonic for this printer)-I managed to print a test page and something of Word-, I then downloaded our accounting software and added an hp printer - in the process, I removed the usb connection and later reinstalled anbother port - since then I could not print all documents or bills - I uninstalled and reinstalled the printer - I deleted and created ports - initially the docs crammed into a queue for printing - I then changed the setting to print online and print test page new - now I send documents to print and they do not appear in the print queue - it seems to be multiple of the printer on the computer copies when I reinstall - also get a message that is not network printer (the printer is connected by usb) and another message00? 0000? etc.

  I used the printer add - local port - function and then create a new port that I called epson - someone can talk me through the process in detail.

  specifically what port should I use (local or create new)? I used the port usb - is that correct?

  If I print a test page? I would be able to print documents?

  If I get epson 1 and exemplary epson 2 - has actually deleted the printer driver?

  Please note I have contacted panasonic who can't stand the printer-I called epson that does not support the old drivers and lenovo that says it's a software problem talk to microsoft.

  We also run windows 7 64 bit in xp for the printer mode if so? How?

  Hello

  I suggest you to uninstall the printer drivers and then use the driver file that you want to install by using the procedure - below

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file that you have on the computer, and then click OK. Now, check if the printer is correctly installed.

  I hope this helps.

• Cannot get his work when running applications with "Run as Administrator" all of a sudden.

  My daughter has been using my computer and done 'something' to him. To get the sound to work now under IE, Firefox, Ventrilo, etc etc I have to run applications as an administrator... even if my account has administrator privileges.  I'm at my wits end, because I've tried everything, and Google returns nothing to give me a helping hand.

  I am running Windows XP Pro SP 3

  I don't know that if Skyke was working or not, I removed it when I started to try to fix things. No program used his work properly, browsers, windows live messanger, ventrilo, etc..

  I tried both FixIt programs you listed above, found nothing.

  In the end, I gave up and reinstalled.

• Cannot get ' mouseEnabled = false & quot; to work with my DisplayList

  Flash CS3 AS3 problem with my display list and 'mouseEnabled '.
  
  * edit removed link *.
  
  OK, so here is my problem. If I have let fall 2 big buttons on the stage and then attach the graphic library that covers the button I can use 'mouseEnabled' to disable the passage of the mouse on the chart so I can click on the button hidden behind the chart. However, if I fix the image even in the same way, but add a sprite of container instead of directly to the step that I can no longer get 'mouseEnabled' make me click on the chart! I don't know that it's just something about the way in which I put to the top of my list to display but can not understand.
  
  
  My Code:
  

  disable the property mouseEnabled of the container.

• Cannot get Canon printer/fax to print with Windows 7. Shows only the fax dialog box.

  I have a Canon MX892 printer/fax/scanner and a new HP laptop with Windows 7.  It shows as Canon MX890 Fax in the peripheral area.  When I try to print, it displays the fax dialog box and will not let me print. How to recognize as a printer?

  Hi Lynn,

  Thanks for posting your question on the Forums of community of Microsoft.
   
  You did changes to the computer before the show?
   
  I suggest for the link and follow the steps in the article:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Note: Refer to the link and install the latest drivers from the manufacturer's website.
  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/office_all_in_one_inkjet_printers/pixma_mx892#DriversAndSoftware
   
  Also, contact the printer manufacturer for assistance.
  Reference:
  http://USA.Canon.com/Cusa/consumer/standard_display/support
   
  Hope this solves the problem.

• Cannot get < LI > to display a customized with CSS image

  Here's my CSS using Dreamweaver CS4. I have validated the image is at the place and on the server.  It does not locally or on my server.

  {.boxbullets}
  do-family: Tahoma, Geneva, without serif.
  do-size: 8pt;
  make-weight: bold;
  Color: #000;
  list-style-position: outside;
  list-style-image: url(images/bullet.jpg);
  list-style-type: disc;
  }

  I use it so as

  < class li = "boxbullets" > September 16 and 17 < /li >

  But all I get is a black ball instead of my image

  Apply the class to the

  tag and not to the individual
  • Tags.

• Cannot get my android tablet to sync with my windows computers

  I have Windows 7 and 8.1 and a Lenovo tablet. Firefox is updated in all. My Favorites synchronized between my computers, but when I try to sync my tablet, it does not give me numbers to type as indicated in the help section that he must. But it says that my tablet is synchronized. Do not understand. There is no favorite of my computers.

  Hi sdwrdt,
  Numbers to type? Are you talking about an old article on synchronization of the former by chance? There are number of synchronization during the synchronization of the new features on the old account synchronization. Synchronize your bookmarks, Firefox, history, passwords, etc.

• cannot get rid of "free aol" supplied with the computer.

  When I try to uninstall in Control Panel will not work

  Go to AOL in the start menu > programs, and in one of the subfolders (I don't remember exactly that), there should be a list for "test of AOL free Uninstall."

  SC Tom

• Cannot get my android phone to connect with bluetooth on my computer help

  not a lot of details, click Add wireless bluetooth and make the phone discoverable.

  Hi bobbytedrich,

  ·         What happens when you try to connect the phone to the computer?

  ·         You receive an error message?

  ·         He has already worked on the computer?

  ·         What is the brand and model of the phone?

  Follow the steps in the article.

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Also install the drivers and software on the computer. You can also consult the phone manual for more help and information.

• Cannot get my camera photo or other driver discs CD to load in PC

  I got a response, but it was in the form of a question on my removable disk (e :)) not being is not accessible to the computer.)

  Pavel asked if I got a picture of a camera when I click on MY COMPUTER. He wasn't in removable drive section. Or any removable drive announces (e :)) or (f) there used to be, but somehow had moved and I can't get them back where they belong.)

  I also tried to burn a copy of a file on a blank CD and the PC was ready to do it, but a box that came, stated that the pc was not feeling a disc in the tray. He told me to put in a blank CD.

  When I put a CD, I could see the disc rotation bit next to the cursor on the screen, but the Pc was told that the ferry was empty.

  Would a laser dirty playback head be the problem and if so, what would be the best method of cleaning?

  Pavel has, or anyone, please get back to me.  Help

  Thank you.  Paul (greybiker)

  Hello

  1. have you tried to plug the camera into a different USB port and check?

  2 are you able to use other USB devices on the system without any problems?

  3. Since when are you facing this problem? Have you been able to use the camera on the system before?

  4. you remember to make changes to the system?

  5. What is the exact error message that you encounter when you try to access the CD/DVD drive?

  6. What is the model of your camera and who is the manufacturer?

  I suggest to update the drivers for the chipset on the system and check if the problem is resolved.

  Method 1:

  I suggest you run the fix that is present in the link mentioned below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  Apart from that, I suggest you follow the steps mentioned in the article below.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  Method 3:

  I suggest you follow the steps mentioned in the article below.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575/en-us

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900/en-us

• Cannot get CS4 to start after change of disc

  I changed boot drive on my macbook pro running OS x 10.9 to an ssd.

  Since then, I can't start CS4 and he says has only licenses.

  I had this once before a few years back when I had a disc problem and had to restore from a backup and I used the license recovery tool and managed to make it work. This time, I tried all the steps on the doc of recovery and the tool and still does not work. Maybe something to 10.9 of Mac OS x.

  I talked to customer support and they say that they do not support for older products and suggest I go on forums or buy the latest version of product!

  I have the serial number, but I don't have the software cd. I didn't think that I should be with backups etc..

  I not even looked to see if the old version of CS4 free trial was available but the link on adobe prodesigntools site does not work either, so I guess that which was removed.

  Can someone advise please because he is really stuck now?

  I have still the old drive internal that I could boot from, but if I do that is there then a way to do something for transfer to the new player so he can work on there etc?

  Thank you

  Mike

  If you follow the 7 steps you can directly download a free trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  and activate it with your serial number.

  If you have a problem downloading, you follow the 7 steps, or your browser accepts no cookies.

  the most common problem is caused by the failure of meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  Unable to obtain the cookie translates into an error page displayed after clicking on a link on prodesigntools.com