BIOS HP (501) Application error

Similar Questions

• HP EliteBook 8460p: BIOS Application Error (501) missing or Currept

  Dear all,

  I have problem with my HP EliteBook 8460p

  

  "BIOS Application Error (501) missing or current" I install newer and updated date of the BIOS and drivers but problem not solved, there is another problem is the power of the laptop on through Internet browser button. Can I replace the motherboard with a new one. Issuance of replacement still exists please need full as soon as possible.

  

  Dear all

  I find the solution of the power on the issue, in solving this problem of corruption of the Bios is also resolved. And the solution is mentioned.

  Just to go to the bios-online currency configuration => and change the "Web View" button like hide (by default it is selected as change or use) and also update BIOS version

  Thanks and greetings

  Mohammed Sohail

• Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

  Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

  http://h30434.www3.HP.com/

• Satellite 2430-402: 437 Application error during recovery

  Right, I've got a Toshiba Satellite 2430-402 (purchased new) for at least 3 years. I have formated several times before and re-loaded windows back on with no problems until now.

  The problem only started two days ago, when I noticed my CD drive was not recognized. So I decided to format etc, came out the disk Recovery Utility that came only with the computer to install everything, and it will not go beyond 12%. I'm greeted by * Application error 437
  Can not read the file.

  I left really stuck and cannot load anything. I fdisc / formatted /spinrite / kill the hard disk, just in case where there is something nasty on here and can still get nowhere. This is the first time I'm really stuck.

  This could be the engraver of CD or would it be the hard drive or basically the computer is nakered. I inspected the recovery disk, and they are all clean!

  Or is it because I made an update of the bios (you mind, it was weeks ago)

  Everyone please

  Thanks in advance

  Hello

  to my knowledge, the Ghost image files are placed on the Toshiba Recovery CD.
  That's why I studied on the ghosts manufacturing Web site.
  It s Symantec and found this information site:

  HM http://Service1.Symantec.com/support/Ghost.nsf/0/14579a4173691f8988256abf005f4f8f?OpenDocument&SEG= & lg = fr & ct = us

  According to this page this problem seems to be due to starting the computer incorrectly when you use Ghost with GoBack on the computer.
  This problem may also occur when you use a brand or type of CD that works well with your CD - R or CD - RW device. In this case, Windows or DOS might be able to read the information on the CD that other applications cannot.

• Pavilion dv7-6b57nr: misdiagnosis of bios Insydeh20 501 / recovery has not re details save

  Case: 3024768463
  Wiping drive
  Recovery retried
  Received the error found no indicator is set to unit, use EEPROM to set sku = 2
  CTO error condition has been detected in the phase of factory update

  I tried to get like 10 times with disk ordered Hp recov.
  Tried restoring to the same problem of disc disk.com
  Spoke with ho support
  They sent me new disk
  Re ran recovery with new drive after drive
  No luck, same error
  Tested drive short and long history
  750 GB at 5400 RPM don't drive no error found

  BIOS of diagnosis indicates error 501
  Read about disabling fast book or links in the bios
  Bios Insydeh20 without advanced options
  From the BIOS to f.1c

  Discover wireless blue light not turn not
  Tried several times to get wireless to change to blue is orange
  Rest of talk details recov error set uia to 951
  Fix start ups .cmd
  Create complete progress information

  SDRD tweaks to change the regional settings default user
  C:\System.sav\util\Tdc\Mcpp\FBIRES\FBIUSRES.dll copy
  Run Dism.exe/image:c\set-skuintldefaults:en-us-image: c:
  -----------------
  Launch PININST.exe for offline
  Housing starts [sleep 10 sec]
  Housing starts [creation RstoneFupdate.ini]
  Start to [create the pagefile of 1 GB for offline]

  Volume in drive c has no label
  Volume serial F0F2-0DAD

  Directory of C: \system.sav

  Starts Sysid check
  Country 244
  Loc sys def = eng us

  Reset country administrator
  Reset the default user country
  Reset system

  Start PIN Tweaks
  PIN Tweaks to hide all for BurnBoot PBO and BBV2 on the restored image
  Tweaks for OOBE unattended.xml
  To pick up the appropriate page file

  Rename unattended.org to unattend.or
  Without light sensor

  It is restored by SDRD SSRD.flg image

  Beginning Mir Tweaks
  MIR Tweaks
  Starting update factory
  Start the installation of Qfe offline
  PININST_Off: adopted

  Type system.sav\logs\ BBFinder.log C:\
  Type C:\system.sav\logs\BBFInde0.log
  ---c:\System.sav\logs\PININST_Off.log
  Last result
  Check fulist.log to see if there are duplicate describe
  No duplicate
  Duplicate No. describe found... Past
  There was no update from the factory

  Yet once elapsed without errors.
  Read several forums on Insydeh20 in legacy mode
  Advanced number of options in the bios do not know how to get the various bios options
  Tried to not launch the he utility before recov sp45645 no chance
  Can someone help I'm lost
  Pretty good tech
  Tried to remove ram and battery of camps
  During the night no luck
  Tried by force to the low no luck
  HP dv7-6b57nr
  Several restorations with 2 sets of disc Hp recov
  1 set of disk restore disk.com
  BIOS card mother serial 4cb14521cb
  Read about the series does not also possible motherboard

  Please help end

  Hi Ben71,

• Lsass.exe application error application cannot initialize (0xc0000005). "

  "lsass.exe application error the application failed to initialize (0xc0000005)", on a XP Pro Dell desktop computer.

  I read all the answers to this problem.
  He left me confused.
  I'm not a guru of the PC (fair mainframes)
  I'm from the old school.
  I want to just fix this problem after trying all the F8 approach.
  I'm about to pay someone for everything again with a wipe HD and install OS up tp SP3.

  Or... I can jump to the 'other side' in total! (My son has never such problems with its Apple/Mac but only complained not enough software and comes to me so that he cannot find solutions.)

  I have studied this XP - OS on a Dell computer for a few days and now know enough to be dangerous.

  In addition, this problem appeared after you apply a few serious fixes MS?

  I don't know yet how to get the BIOS.  I'm not yet technically strong (but necessarily be).

  How can I download necessary patches with a white screen?

  I have never tried a reinstall of XP.

  I have the following CD:
  * Reinstallation CD MS Win XP Home Edition (SP1 included)
  (Currently up to SP3)
  * Application: To reinstall Dell Tools System Software
  * Dell Dimension Resource CD
   
  Dell has 2 partitions: C:\ (the system, Windows software, etc.) and D:\ (all my data, etc.)

  So... There you have it.   And, of course, would sincerely appreciate your help.

  And Yes... I am committed to give once I have something to give back.

  It's great to have someone on "this side of the fence!   (my son is still laughing - %^$#@!)

  trikericy,
  Unfortunately, there are several things that can cause this problem, including viruses.  Usually by pressing F2 when a Dell system is powered, you will have it in the BIOS.  But you may need to check with Dell for your specific model.

  If you are able to boot from reinstall drive and enter the Recovery Console, you can run the following commands to see if they will help to clarify this.

  Chkdsk /r

  sfc/scannow

  If the recovery disc provided does not offer the console recovery or these elements do not disable upward, then you can perform a factory restore to reload Windows.  You will need to check with Dell on recovery options they offer.  However, since you have 2 drives, it looks like all your data will be safe and it is only a matter of reinstalling programs.  If you do a factory restore, then I suggest updating Windows before reinstalling applications.

  Hope this helps out.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Thunderbird does not, application error

  Installed thunderbird - 31.3.0.en - US.win64 - x86_64 in 10 64-bit Windows. When execution to get this when running.
  'thunderbird.exe Application error. The Application was unable to start correctly (0xc000007b). Click OK to close the application. »
  Hope this information helps.

  dwflo

  Download and install the current version of https://www.mozilla.org/en-US/thunderbird/all/
  There is no 64-bit for Windows build Thunderbird, and you have not actually one.

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Re: AccelerometerSt.exe - Application error

  Hello

  I just bought the envy 15 and used for only one day, the next day I get this error:

  Re: AccelerometerSt.exe - Application error

  Your quick help is very much appreciated.

  Thank you

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• Satellite Pro P100 - Application error remote control Toshiba

  I regularly see the pop-up poster titled 'Toshiba Remote Application Error' whenever I start my Satellite Pro P100. I am running Windows XP Media Center Edition SP3.

  My question is - is - does anyone know what can be done to stop this error appear?

  Hello

  Try to remove it from the startup

• IEHelper Acrobat: iexplore.exe - Application error

  Whenever I get close internet explore I get the message "Acrobat IEHelper: iexplore.exe - Application error the instruction at"0x01801ea8"referenced memory at"0x01801ea8".»

  The memory could not be 'read' "what should I do?

  Which version of Acrobat reader you have installed?
  Try to remove this application, clean the registry (with CCleaner), download and install the latest version of Acrobat reader!

  All that s

• Application error: vmsnap23.exe

  Hello, all.

  This is my first post on this forum, so please be nice!

  Last month, I have an application error that occurs whenever I connect. It seems that the vmsnap23.exe application fails to start, but I don't know what it is (* or * else) so that I can fix it. Any ideas?

  I'm on XP (sp3 since yesterday)

  The event viewer shows this information:

  + Faulting application vmsnap23.exe, version 0.0.0.0, module failed ntdll.dll, version 5.1.2600.5512, address failure 0 x 00011669. +

  I have followed the Microsoft but have not found something useful here. The program is slightly on the C: and not in "program files", or one of the system folders.

  It is a program of Toshiba, part of XP * or * something questionable I can simply delete?

  Thanks for the research.

  See you soon!

  Ken

  Reading a few other forums I found an interesting comment on VMsnap23.exe. Supposedly this process belongs to McAfee VirusScan. McAfee is installed on your laptop?

• application error Userinit.exe & rundll32

  I don't know if anyone has any help on this would be greatly appreciated.

  I am Windows Windows XP Home SP2 on a Satellite edition.
  I think I have a virus that prevents me to connect to my computer properly. Whenever I connect to my computer, it shows the desktop, but nothing else. He then says "userinit.exe application error 0xc00000005 application failed to initialize properly."

  I have to use the Task Manager to find the office. I then give me rundll32 errors with the same error as stated above code. The rundll32 error prevents me from doing anything administrative, so I can not turn off the system restore, I could save a copy of the virus.

  I ran superantispyware and it seems to keep finding the same virus without getting rid of them.
  I really want to do a repair install, I can't find my cd.

  In my opinion these two files are not affected by viruses.
  Maybe your superAntiSpyware it cannot recognize as common system files.

  To ensure that your system is not affected by a virus, you should try to use multiple VRU and spy ware applications;
  I use the software called Antivir. The standard version can be downloaded for free from various Web sites. I recommend also using an Ad-aware and spy boot Search and Destroy. All these tools prevent system of Trojan and Virus attacks. You should use it too.

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!