HP Elitebook 8530w: laptop suddenly stops after 30-40 minutes.

Similar Questions

• My Lenovo Y330 laptop suddenly stops.

  Hi guys.

  I use my laptop for all 10months now and since I've upgraded to Windows 7, I am unable to make one of my videos from my Adobe Premiere Pro CS4, even, Media Encoder and more...

  I also noticed that whenever I'm playing Call of Duty: Modern Warfare 2, after a while my laptop suddenly stops. So I think, it's because the processor in my laptop works 100% and it it stop automatically? But what I don't understand is, when I was with 64-bit Windows Vista SP2, this does not happen. Help me please...

  I read in some of the previous posts that there could be a bug or a worm with "Energy Cup"? who's who? can someone enlighten me please? Thank you.

  Here's my laptop specs. :

  Lenovo Y330

  Intel Core 2 Duo T5870
  Apacer 4 GB DDR2 800 mhz RAM
  WD Scorpio Blue 250 GB-5400 RPM

  ATI Radeon HD3450

  Windows 7 Ultimate 64 bit

  I already have 2 clean installations of Windows 7 Ultimate 64 bit and it still happens... = c

  
  

• My laptop suddenly stopped opening my Hotmail emails. I can connect to Hotmail and records are regularly updated with new emails, but nothing happens when I try to read an email.

  My laptop suddenly stopped opening my Hotmail emails.  I can connect to Hotmail and records are regularly updated with new emails, but nothing happens when I try to read an email.  The cursor will just highlight the particular word on what it is and do nothing.  As far as I know, nothing else was done on my computer.  This could be the cause?

  original title: cannot open emails.

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

   

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  Hi sh8kdown,

  Thanks for posting this question in the Microsoft Community!

  I understand that you can not connect to Bluetooth devices on the computer. I'm sorry for the inconvenience caused to you. Rest assured that I will do my level best to help you.

  (1) what is the brand and model of the computer?

  (2) what is the model number of the Bluetooth devices?

  (3) you get an error message?

  (4) did you of recent changes to the computer before the show?

  I suggest the following methods and check if it helps to solve the problem.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Troubleshoot issues with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  (Applicable to Windows 7 as well)

  Method 3: Error: "Pilot of Bluetooth device not found" when you try to connect a bluetooth device: http://support.Microsoft.com/kb/2654568 

  Reference:--

  Add a Bluetooth device to your computer: http://windows.microsoft.com/en-US/windows7/Add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• My Windows 7 laptop suddenly stopped recognizing a device (mobile phone), apparently due to the error Code 43!

  My Windows 7 laptop suddenly stopped recognizing a device (mobile phone), apparently due to the error Code 43! Any ideas how to sort?

  Thank you George for taking the time to answer. I had already tried everything you suggested, but to no avail. I've sorted it now though. It was, quite simply, a defective USB cable!

• How can I get the screensaver to stop after a few minutes, while the screen turns off.

  original title: computer sleeps

  I leave my computer on all night.  When I'm done with it for the day, after 5 minutes, the screen saver turns on.  How can I get the screensaver to stop after a few minutes, while the screen turns off.  What we call that?  Sleep is - this Mode?  Hibernate? Thank you!

  Hi miztex37,

  ·         You want to put the computer in sleep mode?

  See the following article to see if it helps.

  Microsoft Windows XP - automatically put your computer into standby mode

  See also:

  Microsoft Windows XP - manually put your computer in sleep mode

• FM Radio stops after a few minutes

  Hello

  recently I have updated my OS to 6.0.1. After that, my fm radio app stops after a few minutes.

  I launched this safe mode. In safe mode, it the application runs without problem.

  So, I think, another application using the speaker. Am I wrong?

  What is the problem? How can I solve this problem?

  Thank you

  the problem is solved with the last update...

• My computer acer laptop keeps closing after about 5 minutes in standby mode. Is it possible to fix this?

  My computer acer laptop keeps closing after about 5 minutes in standby mode.  Is it possible to fix this.

  Original title: power shutdpwn

  Hello

  Have you checked your power options?

  http://www.thewindowsclub.com/configure-power-plan-Windows-8

• 9:layers Photoshop Elements are not visible on panel - stops after a few minutes of work

  My photoshop stops after a few minutes of work.  My layers are not visible on the Panel.  There should be at least 11 layers for this card in image.

  Please help - my business depends on this program!

  I'm sorry. To PSEv.9, follow these steps:

  WINDOWS

  Step 1. Hold the Alt, Ctrl + Shift keys when you click the icon to open

  Elements. When asked if you want to delete the settings file, say Yes.

  Step

  2 reset the preferences as above.

  Step 3. Close the items and let the file

  regenerate.

  MAC

  Step 1. Hold down the Opt, Cmd + Shift pressed as

  You can click the icon to open the items. When asked if you want to remove the

  file settings, say Yes.

  Step 2. Reset the preferences as above.

  Step 3.

  Items nearby and let regenerate the file.

• Laptop keeps crashing after 3-5 minutes of availability and receive the blue screen STOP error message: 0x000000F4.

  Original title: Windows 7 Home Premium Bluescreen

  My laptop crashes after 3-5 minutes of availability and then I get a blue screen

  STOP: 0X000000F4
  I downloaded the minidump here:
  https://SkyDrive.live.com/?CID=4a15f2921dfaa4f1&ID=4A15F2921DFAA4F1%21108&AuthKey=! ALOKHvhX1bvbZEc
  as well as a log of driverview:
  https://SkyDrive.live.com/?CID=4a15f2921dfaa4f1&ID=4A15F2921DFAA4F1%21107&AuthKey=! AD1fvwA1rk6pxFg
  Tom

  Hi Vashem,

  The error STOP: 0x000000F4 can occur for several reasons. There are many reasons why your system may crash because of these screens to stop errors\Blue. The most common scenarios are: faulty drivers, hardware problem (especially RAM). In this case, the issue could be due to the motherboard is heated.

  Check firmware and system disk controller BIOS settings are correct and that the storage device has been correctly installed.

  Method 1: The problem is possibly due to material of unsupported disk controller. Check if BIOS (Basic Input\Output System) is set to IDE. Enter the BIOS and check the settings. Change the SATA to IDE option (if available). You can view the manual to do the same thing.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 2: Disconnect any external devices from the computer except for the mouse and keyboard and check if that helps.

• laptop sleeps and stops after 15-20 minutes

  My laptop was overheating and shut down. After the HP service, is not bad overheating, but it still turns off after 15-20 minutes of use. Makes me nuts when you work or games.   What could be?

  If the laptop is overheating and turn off the power, you must ensure a sufficient ventilation.  Make sure that the laptop is not put on something soft like a pillow.  Think of it as raising a little more air circulates beneath her.  Consider making a miniclavier, with active cooling (for example, fans).  Make sure you're laptop or fans are not clogged with dust and work correctly.  Make sure that the heat sinks are free of dust, and the path that air flow is not blocked.  You may need to consult the owner's Manual of your laptop or service for some of these things, because the steps and the level of difficulty varies depending on the laptop in question.

  If you had the laptop serviced by HP, but it does not solve the problem, consider contacting HP again and to let them know that the problem is not solved.

• Satellite Pro 6100 stops after 15-30 minutes

  My satellite Pro 6100 Cup after 15 to 30 minutes of operation on power outlet. There is a noise and all the lights go out except orange slow flashing (power problem). I have restore by removing the power cable and wait a while.

  It will then start again. I used two different adapters and two different batteries. It also happens if work on AC with no battery in the. My suspicion is an overheat cut-out. The Sat Pro has a? Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in. Advice much appreciated. Thank you.

  > Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in
  I agree with you and the user SambadeAmigo. It seems like a simple problem of overheating and so the laptop automatically stops to prevent the equipment from damage

  I assume that your laptop can be enabled again after being allowed to cool. It is a common question if the cooling modules may not work properly because of the dust and debris.
  As suggested, it would be possible to remove dust using the can of compressed air.
  It should work.

  See you soon

• Satellite P10 554 stops after a few minutes and I can not restart

  Hello
  I hope someone can help me with my satellite P10 554
  When I start the laptop, everything is working fine a few minutes. the monitor turns black and the books suddenly stops. I can't restart, when I push the Start button, nothing happens.

  I have to wait about an hour and then I the starts again, but it works for a few minutes and stops again!

  Help me please, cause I need my phone to work!

  Hello

  From your description, I think your device overheat and go down because he cannot be cooled properly. P 10 satellite is older and it's time to clean up. You can't imagine how much dust inside the unit you will find.

  I put t know how are you familiar with this, but if you have no experience don t do it alone.

• HP Pavilion G7: Laptop suddenly stopped working after applying an update

  So I was watching netflix and I got the warning that I had five minutes to shut down the computer or it would be closed himself so that he could catch up. I had done the things in closing and stop it by pressing the power button and in now supported.  Then, I turned on the computer laptop back and he started to update so I zoned out of it and watched something on my phone. While doing so I noticed some type of error message update and do not touch, it's because the last time it happened that just rebooted without the update. However instead he himself off and does not turn around. I tried to hit the buitton of power to reactivate and that did not work. I also tried the suggestions I found on this website to support such as take out the battery and unplug the power adapter to the power source.

  Hi @Spinto46,

  Thank you for the update.

  You have determined that the adapter works, it could be in the laptop power button.  The laptop will require a repair.  Please contact HP support for service options. They provide you with an estimate before performing any repairs.

  Contact HP to Contact HP Support assistance

  If you are not under warranty, a local repair shop should be able to provide an estimate also.

  If you want to consider replacing it yourself to see what is the matter, here's a link to the:

  HP Pavilion Notebook PC Maintenance and Service Guide of g7

  Please note Chapter 4, page 52 for replacement part number and removal and replacement instructions.

  For your convenience, here is a link to the:

  HP parts store

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  Also, by clicking on the ""Thumbs Up ' below is a great way to say thank you! "

• Computer Pavilion laptop suddenly stops.

  Computer work.  All of a sudden the screen is black, button / stop is on all the others do not. Have to stop with the button. Reset.   No other way to resart it.    HP Pavilion Windows vista laptop.

  Vicki72 wrote:

  HP pavilion dv7 Vista Microsoft Security Essentials.  No changes or software added.  Seems that since I'm the new Office Chair and plastic under Presidency happens when sometimes I touch the edge.  But if I express the touch, it happens.   It is not superheated and works fine most of the time.  Thanks for the reply

  OK if everything works before I would say that your Chair plastic causing an electrostatic discharge and it is going through your computer and causing spikes and he thinks that there is a surge and causing it to stop. You have to find a Chair not static plasic or you'll have a short-lived mobile soon. Touch the edge is a discharge electrostatic transfer into the computer and it detects more tension and stop to protect themselves. It's like walking with socks on the carpet a touch a doorknob in metal and you will allow a "Zap" is an electrostatic discharge and what id hit your laptop and it will make short work (pun intended) of you laptop.