Satellite Pro 6100 stops after 15-30 minutes

Similar Questions

• Satellite Pro A10 stops after 15 minutes of internet games

  Hello
  When I play games on the internet such as zuma, scherwoods my laptop sat pro A10 stops after 15 min of game
  When I start my laptop it read disk
  What can do what
  [email protected]

  Hello

  I think overheating is the problem. First of all, you can try is to clean the machine properly. I guess the CPU and graphics card works very intensive and produce a lot of heat. If the equipment cannot be cooled properly the laptop stops suddenly.

  Clean it up.

• Satellite Pro 6100: BSOD after use of the 6000 SP recovery CD

  My 6000 Pro Satellite recently bitten the dust after several years of daily use. I just bought a used SP6100, after which I tried to use my SP6000 product recovery CD to do a reformat. Since when I Stop (obviously common) * 0x0000007B (0xF9680640, 0 x 0000034 etc.) error and blue screen on reboot.

  Is there a way to turn it? I had not thought about media recovery is specific to a single model (and the 6000 and 6100 are quite similar in terms of model anyway), but is this the case?

  Thank you very much for all the advice

  Cannot use the recovery CD on the different laptop models. Perhaps the two Satellite 6000 and 6100 are similar, BUT not even.
  Different drivers and chipset utilities are used on these books.
  The restore CD contains all drivers and utilities, and it seems that the blue screen error message appears because some applications and drivers are incompatible and unsupported on the second satellite!

  So if you want to use the Sat 6100 you should install the OS from the original CD of Microsoft and then visit Toshiba s driver and download the RIGHT and compatible drivers.

  Good luck

• Satellite P10 554 stops after a few minutes and I can not restart

  Hello
  I hope someone can help me with my satellite P10 554
  When I start the laptop, everything is working fine a few minutes. the monitor turns black and the books suddenly stops. I can't restart, when I push the Start button, nothing happens.

  I have to wait about an hour and then I the starts again, but it works for a few minutes and stops again!

  Help me please, cause I need my phone to work!

  Hello

  From your description, I think your device overheat and go down because he cannot be cooled properly. P 10 satellite is older and it's time to clean up. You can't imagine how much dust inside the unit you will find.

  I put t know how are you familiar with this, but if you have no experience don t do it alone.

• Satellite Pro 6100 stops without reason

  When I turn on my phone it stays for at least 15 minutes or more and then stops and DC-IN led flashing orange.

  Nobody knows what is happening that I have read the manual and all?

  For each share of laptop there is a reason any. In your case it may be overheating, but due to a light flashing, I guess there is a problem with the power supply. I really don't think you can do much alone.

  Contact service. Maybe it should be repaired right and you only pay for the exchange of parts.

• Satellite Pro U200 starts after some time it stops after 5 minutes

  Satellite Pro U200 stops after 5 minutes, then starts after some time. When she stops the
  blue screen say - stop: (0x0000008e, 0xaa846f58, 0xa9f29808, 0x00000000)

  Sysaudio.sys - address aa846f58 base at aa843000, datestamp 41107f1a

  Hello

  Believe me; It's not easy to say exactly why the BSOD appears.
  It usually happens because of a malfunction or severe software hardware fault.
  Have you used the operating system of the image of Toshiba?
  Message it says something about sysaudio.sys.
  This file is a system audio WDM filter processes and it s a part of the Windows operating system. It controls the material such as the printer or the graphics card at a lower level.

  Note: The virus uses these files as a camouflage. You should always use an anti virus application.

  In addition, you suggested that the laptop stops after 5 min.
  Well, this looks like an overheating problem. How did you use the laptop? You know that free space around the laptop is very important due to the circulation of air. Fans should also be free.

  I you use Notepad in the right position and it happen, so I recommend asking for help Toshiba service partner. They should check the laptop.

• Satellite Pro 6100 - after updating the BIOS, it does not

  Hello

  I am trying to upgrade my old of Satellite Pro 6100.

  I started to upgrade the Bios via download from Toshiba (using WIN) site - OK downloaded zip files and installed, machine then stops. Problem, it does not restart - it's so now I have a laptop 'death' that is not responding to any key I tried.

  Any suggestions of resuscitation?

  Already I've updated from XP to SP2.

  Thank you

  Paul

  Hello

  It sounds like that the BIOS update has failed and your laptop can start t again. But try this workaround:
  Remove the AC adapter and the battery and then wait an hour. After that reconnect the adapter AC/DC and battery. Try to start the laptop.

  If it doesn t work I think that the motherboard needs to be replaced or you go to an authorized service provider. Technicians can reflash the ROM module
  But maybe you can find a motherboard of second hand cheap on eBay

  Good bye

• Satellite Pro 6100 USB problem after stand-by

  Hey all,.

  I have a Satellite Pro 6100 and when that I start my computer, my USB ports work fine. However, as soon as I wake, I get about 6 pop-up messages stating "USB device" unrecognized and my USB ports do not work.

  Device Manager indicates they work fine, so I'm just confused.

  Any help?

  Thank you!
  -Geoff

  Hi guys

  I'm not sure but I think the BIOS update can fix this. Have you already checked if there is a new update of the BIOS for your unit?

• Satellite Pro 6100 - battery acting very strange.

  As mentioned in the title, my laptop battery is very strange.

  The symptoms are:

  When the battery is flat after only 7-10 minutes he turns not, however if the battery is removed and placed in the laptop, the laptop will start as it has never happened.
  Not only that, but the bonus after the first can indefinitely until this that loaded into an OS and immediately after starting start the laptop stops due to an apparent lack of power, when there is power always, enough to do the same thing again. Also, the battery can still start even after being just in a freezer.

  This reacondioned back to normal battery or is this safe to use battery?
  Thanks in advance!

  Hello

  I guess that your battery is old like machines of this Satellite Pro 6100 and maybe it can't be charged more. In this case, your battery should be replaced.

  But even if the battery is faulty, you should be able to use the device connected to the power adapter.
  So even if the battery is removed, you could power the unit with the mains.

• Satellite Pro 6100 himself turn off

  Hello

  I'm from the Italy. It is 3 days that my Satellite Pro 6100 after some time (it can be 30 minutes or 3 hours) close itself.
  I tried to update bios version 1.70 to 1.90 without any result. I tested my HARD drive and it works fine. I formatted and reinstalled Windows XP Home SP2 Pro edition but the problem that it is still there.
  When it crash, reboot, it seems 'BAD RTC BATTERY' and "BAD CMOS", I have to press F1, then I exit without changing anything.

  I saw that 3 weeks ago appears at the beginning of this message: "PXE - E61 MEDIA TEST FAILURE CHECK CABLE"and"PXE - MOF OUTGOING INTEL PXE ROM" but works laptop well until 2 days ago.

  I don't know why, but every time I restart now stop when WINDOWS XP is on the window (not the first logo on page WXP black) cyan, but the second on the window cyan; can do work that I have to press CTRL + ALT + CANCELLED and it go to the desktop.

  I don't know what to do? Center of Toshiba, it is far from my town, if you can help me will be appreciated.

  Sorry for my English, I read a few post but exactly with my problems, there is no job.
  Thanks in advance, it's a great laptop I jump to save it.

  p.s. There is no dust on it, I tried to lift the keyboard to clean, but it was already clean, even behind the fan.

  Hello supertraz,

  On 6100 laptop there is a soft spot between the control panel and from the motherboard, causing this malfunction. You will not be able to solve this problem simply raise your keyboard and blowing air into your laptop.

  A good description on this problem (I had, too) can be found on this forum posted by user seintaxx here:
  http://www.eXpansys.com/ft.aspx?i=104221&thread=7

  A photo of the defaulting party is here:
  http://img204.imageshack.us/img204/3/sp6100fixby1.jpg

  Good luck with it.

  Kind regards
  chain

• 'Bad RTC battery, check the CMOS' on Satellite Pro 6100

  Hello... I just got a Satellite Pro 6100 and when it is started I get an error message:

  RTC BATTERY BAD
  BAD CHECKSUM (CMOS)
  Check the system. Then press the [F1] key
  _

  I can still use the laptop for about 15 minutes, but then it crashes. I did some research and discovered that it is the power supply Board. But my laptop is out of warranty and the reminder is now officially over.

  Y at - there someone who can help me?
  Thank you
  Liam

  Published by: admin

  Hi Liam

  Hmmm... I think it s not a Council but the battery of the CCF.
  Take a look in the user manual. There you should find something that exactly the message is displayed if the battery RTC (BIOS) is not charged.

  The RTC battery, you must connect the power adapter and should run the laptop for about 24 hours.
  After that the main battery has been charged, then the RTC battery starts to load.

  It will take a little longer.

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• Satellite Pro 6100 - code beep at startup

  Hi all

  Just picked up a 6100 Pro of the Satellite with a few problems.

  It lights up, he pointed out the HARD drive and I can hear the disk activity. However, the screen remains blank and a single beep can be learned after 20 sec. White screen, as I understand it, is probably the issue of Council power raging in the SP6xxx series. However, the beep I do not understand.

  I know that 2 beeps or 3 beeps is incompatibility of memory but no one knows which denotes the beep?

  Ta

  Hey Buddy,

  To be honest it's not easy to say what the cause of the problem because it could be everything and Satellite Pro 6100 is old enough for laptop.

  You have two memory modules RAM? If so remove a module. Always try a module only at the same time and test it in the slot of RAM A and B. A module is may be defective or a slot.

  If this is not the case, there seems to be a problem with the motherboard or the CPU itself. If you can exchange these things, try it yourself as a repair would be too expensive for this good old classic I think.
  Second hand spare parts you can get it on eBay s worth a try! ;)

• Satellite Pro 6100: black border to the right of the screen

  After a new installation with windows xp when I star tup I have a black border (1.5 cm) to the right of my screen.
  After the beginning and the end of the screen saver, I have a full screen.
  but when my laptop started again I have this black border again.
  I have a satellite Pro 6100.

  Management information
  System
  Model = laptop
  Manufacturer = TOSHIBA
  Serial number = 0000000000
  UUID = ffffffff-ffff-ffff-ffff-ffffffffffff
  BIOS Version = Version 1.90

  OPERATING SYSTEM
  Caption = Microsoft Windows XP Professional
  Version = 5.1.2600 Service Pack 2

  CENTRAL PROCESSING UNIT
  Index = 1
  Manufacturer = GenuineIntel
  Name = Mobile Intel (r) Pentium (r) 4 - M CPU 1.70 GHz
  Version = model 2 Stepping 7
  Max clock speed = 1694
  Socket designation = uFC - PGA Socket

  Display
  Index = 1
  Horizontal resolution = 1024
  Vertical resolution = 768
  Chip Type =
  The RAM size =

  Very strange problem! Can you please tell us more about this problem? I assume that you have installed the OS on your own. Since when you noticed this weird display problem?

  Have you noticed this immediately after installing the OS (without driver)? Did you install the display driver on Toshiba support page?

• Satellite Pro 6100-> DVD playback is OK, but can not read CD

  I have Toshiba Satellite pro 6100 and the reader of CD/DVD SD-C2502 on winxp sp2.
  The drive did not read any CD/DVD at the outset.
  After a DVD lens cleaner, it plays DVDs, but the Player cannot read any CD incl. music CD

  The error is 'windows cannot read the disk. The disc is damaged or... ".

  I "took off the CD/DVD drive and reconnected" and the pilot also seems to be OK.

  Any suggestions or ideas?

  Hello

  This sound like a player cannot calibrate properly and that's why the drive cannot read the CD disks.
  Especially the replacement drive is necessary and inevitable. :(