HP Elitebook 8560w: upgrade my ram and the correct use of slots
Hello - my first post!
I just bought HP 8560w refurbished seller. It has a quad core processor and four ram slots. I can post the SN and product number if it helps with my request.
I want to max out my ram without disturbing the keyboard. I currently have 4 x 4 ram installed so that four locations are used. My machine will support a maximum of 32 of ram.
Here is the query - I can remove the 2 ram sticks of the slots I can easily see when I remove the back (I guess these are slots 3 & 4) and replace them with 2 sticks 8 ram each?
It would give me a total of 24 ram - 2 x 4 under the keyboard (slots 1 & 2) and 2 x 8 in two other passers-by.
This upgrade would be OK and be recognized by the system?
Thank you, Russ.
Hi, Russ:
It seems that you can according to the maintenance manual.
http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03424153-1.PDF
He says that one of the compartment of the expansion memory slot should be filled with a chip to add a slot 2.
It also says the same thing about the locations of primary memory under the KB.
See Chapter 4, page 51.
Tags: Notebooks
Similar Questions
-
I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The computer came with 2 GB of ram and the instructions say that there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?
Yes, your MacBook accepts two RAM sticks of 4 GB, 8 GB total, you'd better update the firmware Version MB51.007D.B03.
-
How can I find out what type of ram and the amount, maximum I can add to my: xp professional 32-bit PC?
Thanks, GregCY
Original title: RAM
Fastest and easiest is to go to http://www.crucial.com/systemscanner/ and download and use the scanner.
-
WAG160N Upgrade file is not the correct type or version of this device.
I currently have Firmware Version firmware version: V1.00.09 on WAG160N. I tried to upgrade the firware of ussing.12 the following "WAG160Nv1-EU-ANNEXA-ETSI-1.00.12-code,0.zip" file I get the following error:
Upgrade file is not the correct type or version of this device.
Update failed.
Please select the correct file and try again.
I forgot that I had extracted the first .zip file. Who and the upgrade worked.
-
My Canon MX330 printer is not printing and the In use/Memory light on.
My Canon MX330 printer is not printing and the In use/Memory light on.
Hello
If this isn't a driver problem there is a problem of setting or material and you
need to contact Canon.As Canon OEM is responsible for the good operation of the printer and their
drivers provided. Check with Canon support, online documentation, and
drivers.Good luck, you need to update or reinstall the latest driver.
Canon - PIXMA MX330 - software and drivers<- select="" your="" version="" of="">->
http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx330#ServiceAndSupportCanon - Support and drivers
http://www.USA.Canon.com/Cusa/support/consumerCanon - Support - contact us
http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumerCanon - Windows - Vista and Windows 7 support
http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupportCanon printer - page local confirmation - could be from another region.
http://pdisp01.c-WSS.com/OS/====================================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
HI, I can buy an extra App and that it is used by 2 different people on 1 account at once? The apps are PS en ID. So the first person will use ID all day and the other uses ID all day? and this account a 1
Hello
Please see licenses and terms of use | Adobe
License Adobe CC can be activated on 2 machines using the same Adobe ID, but can be used alone at the same time.
Kind regards
Sheena
-
I installed Adobe forms on my iPhone (iOS 8) and don't see, where the forms are stored.
In CC app for iOS, there is no files (and the space used in CC is 0 MB). And I do not see my shapes in your other apps (for iOS: ideas, Photoshop Mix).
How to export shapes for the storage of files?
Content in your libraries CC is currently not available on the CC iOS app. You can see it online. But, not in the app native iOS... yet. I hope that the CC app will have this feature soon.
-
Size of the schema and the schema used provided actual spending
Hello
Can you please provide me with the query that is used to see the actual size of the schema and the schema used provided.
I got the sqlquery to see the used size of the schema (select owner, sum (bytes) / 1024/1024 "MB" dba_segments group by owner;).
Please give me the sqlquery to see the actual size of the schemaDoes
SQL> select username,tablespace_name,bytes,max_bytes from dba_ts_quotas order by 1,2;
Help?
-
Product name: HP 1000 Notebook PC
Product number: F0C66PA #ABG
I want to upgrade my ram 6 GB or 8... I do not know the maximum capacity of my laptop and it is also possible to add a gpu in this laptop?
No manuals or technical information available to me,
He said:
http://images.crucial.com/upgrade/HP+-+Compaq-memory/HP+1000+series/HP+1000-1410AU-upgrades.htmlGPU in most laptop today cannot be upgraded, it integrated or soldered on motherboard in the round.
Kind regards
-
The upgrade of RAM and warranty questions
Hi all
So, I have a dv6-7031tx, which has 4 GB of Ram. Now I want to remove the 4 GB of Ram on my laptop and replace it with 2 sticks of Ram of 4 GB, will be canceled warranty if I do this? The RAM brand im going for is G.Skill, Patriot or Kingston.
Edited: I talked to HP support last week and apprently they recommend not third party as G.Skill RAM, they recommend only Mircon. I know not even how good are the Micron reputation and they are not well known.
Thank you.
Hello:
You will not void the warranty by installing the memory of any provider.
The only way you will cancel the guarantee is if damage you the memory slot, plastic cover, physically or does not follow the procedures in the service manual to install memory (like removing the battery and the power of a/c before working inside your laptop.
I used the Patriot, G.Skill, Kingston, Crucial, Mushkin in HP laptop computers and desktop PC with a lot of success.
I can also tell you that HP uses no chips Micron exclusively in their PC.
Question... Why do you want to delete a module of memory 4 GB perfect condition except if they put a PC3-1333 chip here and you want to install 2 PC3-12800 (1600 MHz) memory?
Another question? If this is the case, why go to halfway?
I just max the thing out to its capacity of 16 GB and buy 2 x 8 GB PC3-1600 (PC3-12800), memory modules.
The page of the form is incorrect about the maximum of 8 GB.
Please consult the owner's manual at the link below, Chapter 1, page 4.
http://h10032.www1.HP.com/CTG/manual/c03216834.PDF
Paul
-
Peut a Dell 17R-N7010, receive the upgrade of ram and a graphics card?
Hello
I have recently become interested in being a pc player, but my computer is just not powerful to play games. Written IM see if someone could tell me if a Dell 17R-N7010, receive a graphics card and put upgraded ram and if so if you could tell me what it is and where to buy.
Thank you
RAM can be upgraded to max 8G (2 X 4).
Video chip cannot be upgraded. -
HP 15-ac140ne: upgrade of ram and ssd
can increase the 16 GB ram
and m2 ssd installationHello
1 RAM: Guide:
Two not customer-accessible/upgradable memory slots (Intel Core processors) module DDR3L-1600 channel double support
Support of the single channel DDR3L-1600
Supports up to 8 GB of RAM in the following configurations:
8192 MB total system memory (8192 × 1.) or (4096 x 2)
Memory system total 6144 MB (4096 x 1) + (2 048 × 1)
Total system memory of 4096 MB (4096 × 1.) or (2048 x 2)
Total system memory of 2048 MB (2 048 × 1).2 mSATA: no, it doesn't have a slot mSATA
Kind regards.
-
Satellite-C55-A-1NU - upgrade of RAM and SSD upgrade information
I have a Toshiba Satellite C55-A-1NU and I want to know if it is possible to replace the optical drive with an SSD? Can someone tell me what I need to do? What type of rack and SSD should I buy. Thank you
I also want to improve the ram memory, the laptop has only 1 slot 4 GB ddr3 1600 mhz, but is single channel. Which model should I buy to work in dual channel I use cpu-z to identify the model and it shows me hmt451s6mfr8a do I need exactly this or I can put another ty of manufacturing 2.
This upgrade with SSD is not supported by Toshiba, so everything you do is at your risk. Check this forum please. If I m remembering although some people have already posted own experiences.
I think that in most cases they ordered this caddy HDD/SSD but the drive was not recognized at all.In my opinion, you must perform these updates.
RAM
Up to 16 GB of RAM according to specification for laptop, you can put on level and on the lower part under the cover of memory, you should find two memory locations. How to change RAM is described in s. manuals check please page 72.The memory modules are compatible RAM for your laptop model:
4 GB DDR3L-1600-PA5104U-1M4G
8 GB DDR3L-1600-PA5104U-1M8G -
Re: Upgrade of RAM and HDD on Satellite L40 - 14H
Help.
Can I update on laptop up to 4 GB memory? May need new bios version?
Or this model doesn t use more than 2 GB.
Anyone know what is the maximum size of the HD drive I can use on this model?Hello
If you do a search on Google you will find:
standard: 1 024 (512 + 512) MB
maximum scalability: 2 048 MB
technology: DDR2 RAM (667 MHz)So, as you can see you are not able to be upgraded up to 4 GB, and the bios update does not help you
Welcome them
-
RAM and the satellite L20-100 HARD drive
Hello!
I have an old Satellite L20-100 and it has a few problems with the HARD disk. I want to buy a replacement (new HARD drive) so I need to know what are the types of FDI in L20 - 100 discs...
In addition, what type of DDR2 RAM I should buy to install in this laptop?
Don't want to buy a fake, because if I do, it would be very difficult to sell...
Please, help :)
Thank you.Post edited by: in_silent
Hello
I agree with Akuma L20 supports a SATA controller and you need and 2.5 SATA HDD.
Usually it s no matter which manufacturer is all 2.5 SATA hard drives must be compatibleWith regard to the 48-bit LBA:
As far as I know that this could be just a problem with HDD IDE (P - ATA). SATA HDD should not be affected. So, theoretically, you could upgrade the HARD disk using larger than 128 GB.Regarding the upgrade of memory:
http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20683&ft=m&St=3You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM and you can use 2 x 1 GB RAM
Maybe you are looking for
-
I forgot my 4 digit number for my iphone how to retrieve or change?
I forgot my 4 digit PIN for my iphone how to retrieve or change?
-
Can I do a VI that is executable on cmd.exe?
I want to do a VI that accepts command line arguments and prints the result on stdout. I also want to be executable on cmd.exe. I want such a command like "A.i arg1 arg2 arg3" to produce a few texts on stdout. Is this possible?
-
Questions of WRT54GL with the XBOX 360 Modern Warfare 2 chat (even with open NAT)
Hello I read a few posts on the subject, but can't seem to make it work. I tried port forwarding, UPnP and DMZ on their own or at the time and the best I could do is get a "open NAT" in modern warfare, allowing me to play online. However, I do hear
-
Copy of the file to Mobile to PC device on a machine Vista
In our Application, we use a mobile device called a scanner. We use ActiveSync on windows XP and windows mobile device center on Vista machine to connect the scanner. We connect it to the PC by USB and copy the files of devices for PC. It works fine
-
Visual basic 6 make project group in windows 7
Hello I'm a VB6 programmer, I want to know why the make project group does not run in windows 7. Is it possible to activate it?