HP EliteDesk 800 G1 TWR: EliteDesk 800 G1 TWR - no Intel-vt option in bios

Similar Questions

• elitedesk: win7, can not find the usb option during the click on F9

  Hi all. I am a tech. I work with a new book of win7/elite that was just reimagee. Having problems connecting to the network. I had planned on all rebuild. He lets me click F10 to start sequence & save. But once I have restart & F9-click there is no option for me to boot on the USB. Really need these devices ended tonight. Thank you

  I'm sorry that this is not a laptop. It's an elitedesk of HP with win7 / 32 bit.

• HP Elitedesk 705 LTS G1: pcie intel 6205

  After installing an Intel 6205 802.11 PCIe Wireless card in an HP Elitedesk 705 G1 SFF PC, the pc does not start upward.   It gets to the Windows startup screen and restart again.    This will be repeated this constantly until the power is off.   The pc works fine when the card is removed.   I tried several maps and several computers of the same model, and it does the same thing.   We just started to use the 705 Elitedesk.   6205 wireless cards worked well in other models of PC.   Anyone had similar problems?

  Hello

  You cannot use the card that is not in the list:

  http://h20195.www2.HP.com/v2/GetPDF.aspx/c04330394.PDF

  Integrated Broadcom NetXtreme GbE; Intel I210 - T1 PCIe GbE (optional); Intel Wireless - N PCIe 7260 802.11a/b/g/n (optionally); HP (2 x 2) 802.11a/b/g/n wireless dual band Mini card with Bluetooth® (optional)

  Kind regards.

• range of video failed

  Respected HP engineers sweet good morning Sir

  My PC hardware is HP EliteDesk 800 G1 TWR PC intel core i7 4770, 8 gb x 2 ram intel 64-bit hd 4600 .windows 8 enterprise. HP 2311 L01 2.21 LED monitor BIOS, video version 9.18.10.3204 widespread driver version 2.01.0 drover

  When I test my hardware with uefi hp diagnostics utility, I found this error

  Failed to check the video palette.

  Honor ID 9TAP60-000735-NH12XF-Q2AT03

  Product ID C8N27AV

  I have; "ve updated the version of the bios of 2.21 to 2.23 TI creat more video problem so I come back it back.because my video option to pc is not uefi, the legacy because uefi would create more video problems.

  I've updated the driver version 10.18.10.3383 driverdownload of hp, he couldn't have solved the problem. I also tried the driver from microsoft update 10.18.10 3412. He did my screen half black so I removed the two drivers inf via pnputil.exe - f - d. and installed back 9.18.10.3304. but my graphic video is not performing and using the basis of turbo seek much .and reduce the use of the meory.

  Please guide me as before I was guided.

  Thanking you in anticepation

  Hello respected Sir Dunidar Sweet

  I've already updated the BIOS my PC BIOS VERSION is L01.2.23.

  I need more upgrade.

  Sir, I am truly grateful for your kindness and for helping me better than you can

• HP Photosmart C6380 all-in-One printer

  Recently my printer mentioned above instead print a copy in accordance with the instructions, the photo tray keeps operating. All I want to do is print an A4.

  I recently replaced all inks.

  Can someone tell me what could be the problem?

  Thank you

  Cecile-Jayne

  Hi Cécile-Jayne.

  Thank you for your answer! I think that it is most likely a hardware problem, especially if there is ink leaks at the back of the printer.

  Please call our technical support at 800-474-6836 for your warranty options. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope this helps and have a great day!

• HP Deskjet 722: HP deskjet 722 windows 7 64 bit

  installed the operating system of windows 7 professional 64 bit. now cannot get 722 HP deskjet to print.

  I used the system of operating windows 7 Professional 32-bit with no problems.

  printer installed on an XP system and the printer works fine.

  any ideas?

  Thank you

  Hi miltmaslin,

  After some additional research, I decided that there is no comprehensive software features available and drivers for this printer for Windows 7.

  I can only suggest to try a USB 2.0 printer cable to install the driver in OS as shown previously, otherwise please call our hotline at 800-474-6836 for your upgrade options. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• Satellite M505-S4990T - need opinions about it

  What is someone has a Satellite M505-S4990-T? Can someone give me advice or a review on it?
  Is the useful touch screen feature? It works well?

  I'd appreciate any comments!

  Hello

  As far as I know the Satellite M505-S4990-T is a series of Toshiba laptops we and it s designed for the American market only.

  I found a few details to the Toshiba page:

  _Processor and Graphics_
  Processor Intel Core 2 Duo T6600 2.2 GHz, 2 MB L2 Cache, 800 MHz FSB
  Mobile Intel GM45 Express Chipset
  Intel Graphics Media Accelerator 4500MHD with shared graphics memory dynamically allocated

  _Memory_
  Configured with 4 GB DDR2 800 MHz (max 8 GB) storage drive
  500 GB (5400 RPM) SATA hard drive

  _Display_
  14.0 diagonal TruBrite® TFT LCD display at 1366 x 768 native resolution (HD)
  o Native support for 720 p content
  o LED backlight

  _Expandability_
  2 main memory slots. Both slots may be occupied.
  Location ExpressCard (ExpressCard/34 and ExpressCard/54)
  Memory card reader
  o Secure Digital, Secure Digital High Capacity, Memory Stick, Memory Stick PRO, Multi Media Card, xD Picture Card [shared location]

  _Ports_
  Video
  output port o RGB (monitor)
  o HDMI-CEC

  Audio
  o to S/PDIF output port (shared with headphone port)
  o Microphone input port
  output port o headphone

  _Data_
  o ports 3 USB v2.0
  o ports 2 x USB v2.0
  o 1 x port combo eSATA/USB with USB Sleep and fresh
  o LAN RJ-45 port
  o modem RJ-11 port

  The great sounds of tender specifications...

• Upgrading processor on the Satellite X 205 s9349

  Hello!

  Can anyone tell me please what I can install in my processor s9349?
  FSB is 800 mhz... Toshiba in the bios update bios v.2.10 ISC supports t 8100, t8300, t9300, t9500 only
  and v2.30 - penryn and merom cpu microcode upgrade... so the question is... can I install processors 800 mhz or only ranked in BIOS?

  THX.

  If these days, ill try to upgrade T7500 in X 9000. (X 200-21 D)

  But to your question, he thinks that you can use any FSB800 merom or mobile penryn, which has 35W TDP. (and bios, version 2.50)

• Satellite Pro P100 - multiple display after Exchange screen problem

  My laptop: Toshiba Satellite Pro PSPA6A-028017 with Nvidia GeForce Go 7900GS

  OK, here's the story. I turned on my laptop about a week ago and the screen is blank. I plugged in a monitor external via AVI and tried Fn + F5, but nothing. When the computer reboots, the external screen worked. When I tried to turn on/off displays the external monitor is turned off and I found myself with an empty screen - I was obviously spent on screen of the laptop but working blind, I couldn't work out how to get the external monitor to start again. FN + F5 did nothing.

  At that point, I called Toshiba for the support of the warranty (on-site, next business day). They had a technician with new monitor/display on site the next day (after a few calls me to follow up). It has replaced the screen but struggled to lift the screen up and running. He finally managed to logon Windows safe mode and get running but only display on 800 x 600. It has updated the Bios and drivers. He could then up to the 1024 x 768 resolution. Highest and the screen would be left empty.

  At that time we plugged in an external monitor via VGA. It worked, but the technician couldn't get the each display to run on each resolution. He left him speechless and he acknowledged that things still are not good. Later, after that the technician had left, I managed to get views working so each to their own resolution. However, I could not always connect the external monitor via DVI (VGA only). I was at least temporarily to work!

  The next morning that I turned the laptop on to find that I was back was started. No display on the laptop and on the external monitor only low resolution. It seems that the external monitor is simply cloning which should show the computer screen.

  Under the display properties > settings the display shows:
  1. (multiple screens) on NVIDIA GeForce Go 7900 GS
  2 Dell G2410 (Analog) on NVIDIA GeForce Go 7900 GS

  I know that when everything is working properly, he said not many monitors. The only screen I see is the Dell external monitor. And when I identify the Dell screen is no 1, even if it's not listed number 2.

  I don't know anything about the cards video etc, but a theory I have is that adapter is defective and is only show the analog signal. That is why I think that the screen of the laptop and external monitor (connected via DVI) works not done the external monitor connected via VGA (but it seems to be imitating the screen of the computer, allowing only the laptop screens range of resolution). Is that possible?

  Someone at - it ideas? The problem is likely to be the video card? I'm puzzled. I'll have to get the technician on the spot back (which will probably still 2 days and several calls, follow-up) and I don't want to lose any time. I have a business to run and I have now lost a weeks work already. If I can offer some strong theories before the technician comes on the spot, sometimes we can get parts ordered in advance.

  My warranty expires in a few weeks, so obviously I want this fixed correctly in the shortest time. I don't want to wait 2 days for a technician to come and have to wait another day or two for parts.

  Help, please!

  Thank you
  Ghjghj

  It is not easy to offer the correct answer and explanation why this happens here on the forum. In laptop cases should be tested with diagnostic tools to ensure that what is the problem.
  OK, exchange of display was a step in the right direction but, of course, this question is more complicated and doesn t happen due to the defective screen only.

  I agree with Akuma and also thinking that there must be a hardware problem on the motherboard. Before the expiration of the warranty, you should contact the service again and let check portable equipment.
  The fact is, if there is that no book of hardware malfunction should work fine preinstalled with delivered recovery image (Toshiba CD/DVD recovery facilities).

  Please, don't wait too long and contact ASAP. They check your laptop. the warranty is still valid and your laptop needs to be repaired.

  Good luck!

• OfficeJet Pro 8500 A909a, 2 1/2 years. Windows XP sp3. White vertical stripes

  Vertical white middle band images of scanned documents. It was working fine an hour ago.

  It seems that it is a hardware problem. I was initially hoping that the problem was with the ADF (the most common probably that I saw normally when paper or foreign objects are blocking the bulb scanner), but because it is not with the ADF, but with the flat bed scanner, it seems that the bulb is out or a Ribbon under the glass does not block the light to do what it is designed to do.

  What I would say, is to call our technical support at the 800-474-6836, they have delivery options for you on similar newer printers that are re-certified HP products at a discount rate.

  WARNING: do not try to take the glass on the unit to change the bulb or move all cables, when the printers are assembled they are in an extremely clean environment (for example, an operating room) to prevent dust from getting inside the printer and cause problems.

• Question about upgrading RAM on Satellite U400-138

  Hello

  My laptop model is Satellite U400-138, part number: PSU44E-00500JG3

  Technology:
  type: technology Intel Centrino 2 processor on processor Intel Core 2 Duo P8400, Intel GM45 Express chipset and Intel WiFi Link 5100
  Clock speed: 2.26 GHz
  Front Side Bus: 1066 MHz
  level 2: 3 MB cache

  Operating system:
  Genuine Windows Vista Edition Home Premium (pre-installed, Toshiba-HDD recovery)

  System memory:
  standard: 3 072 (2 048 + 1 024) MB
  maximum extension: 8 192 MB
  technology: DDR2 RAM (800 MHz)

  In intel webside one writes the following on my motherboard laptop specifications:

  "1.2 Intel GM45 Express Chipset supported feature
  All features supported by the Intel PM45 Express Chipset supported by Intel GM45
  Express Chipset unless otherwise stated below. Additional features are listed below. "

  1.2.2 memory system «»
  -Support to 667 MHz DDR3 then FSB 667 MHz isn't that. "

  "1.1 Intel PM45 Express Chipset supported feature
  1.1.2 storage system
  -Support for DDR2 and DDR3 SDRAM
  -Support for DDR2 667 MHz and 800 MHz
  -667, 800, and 1066 MHz DDR3 support
  -One SO-DIMM connector (or memory) per channel
  -Channel memory supported two Configurations
  -Double-channel symmetrical (with Interleaved access)
  -Dual-channel asymmetrical (with or without Intel Flex memory technology)
  -Support for 8 GB of maximum memory
  -scale 64 - bit per channel
  -Technologies of 256 MB, 512 MB, 1 GB and 2 GB memory supported
  -Support for DDR2 and DDR3, x 8 and x 16 devices
  -Support for DDR2/DDR3 termination on chip (ODT)
  -Supported partial written memory using data signals mask (DM)
  -No support for chip quick selection mode
  -No support for ECC
  -No support for operation 1N. "

  http://www.Intel.com/assets/PDF/datasheet/320122.PDF

  The question is...

  I want to upgrade my portable computer system memory 3 GB DDR2 (800 MHz) RAM to 4 GB of RAM DDR3 (1066 MHz), which is compatible or not?

  Respect,
  enteoana

  Hello

  In my opinion, you should follow specification not Intel and Toshiba. S Toshiba of info is based on own tests and facts.
  So, depending on the specifications of Toshiba for the GM45 Chipset it is clearly written:

  Min(on Board) wheel capacity - DDR2 800 MHz 0 MB / 8 GB max
  Type of extension of memory - DDR2 800 MHz 1 GB/2 GB/4 GB
  Type of module - SO-DIMM

  So if Toshiba write about 800 MHz modules, you must use the modules to them and not faster.
  You may be able to use faster too, but they do not work with the maximum speed, but not going down to 800 MHz.

  If you want to use max RAM amount use recommended and tested 2 x 2 Go DDR2-800 (PA3669U-1M2G).
  Indicated as compatible RAM, 4 GB DDR2-800 (PA3670U-1M4G).

• How to change the speed of the RAM on my HP Envy m6 - 1158ca?

  Hello

  I have a laptop of m6 - 1158ca HP Envy (Intel i7 3632QM @2. 2 GHz) running Windows 8 Pro 64 bit with 8 GB of RAM. Supposed to be 1600 MHz RAM speed, but I don't see that 800 MHz through a third-party tool (CPU - Z).

  Are there settings in the BIOS I have change to change this?

  Thank you
  Véronique

  N ° there is no option in BIOS OEM that allow you to change the speed of add-on memory or speed of the bus.

  It is an option that is present in passionate desktop motherboards.

  Computer Systemboards laptop OEM and microcomputers have less optional parameters.

  Best regards

  ERICO

• T500 completely scrambled discrete graphics

  My T500 has developed a serious problem with the video of the graphic interface is completely corrupt.

  I tried on the features of dual screen with my L170p monitor. As I used it, I noticed a video corruption, particularly on applications slipped between the views. Finally, I decided that it is not really me anyway, and so I minimized the 2 display resolution (800 x 600) and disabled the option "extend my Windows desktop on this monitor.

  However, corruption has continued and I decided to restart it. However, before I could, the machine gave a BSOD that was mostly unreadable. Reboot, the Windows XP splash screen was also altered; I tried to use the Fn + F7 to switch to the external display, but it was no better. Try to connect fingerprint BSOD machine'ed - this text is unreadable, but I saw the word '' parity '' in there. From this point, it went from bad to worse. Connect the external display and try to get the BIOS with the F1 to the ignition, I could see a text there, but it is mostly illegible and overlapping with lots of video noise and the vertical bars cyan, flashing boxes of all colors, etc..

  Somehow, I managed to do enough to get the BIOS to switch to the built-in graphics card and was able to boot Windows and install the Intel graphics driver, so the machine is little functional again.

  However, go back to "discrete graphics" gives the same problem: no video on the internal LCD screen, only scrambled on the external monitor. If I allow Windows to start with discrete graphics, TI BSOD with an unreadable screen for the most part, but it seems to speak to shut down Windows to avoid damaging the material and the word 'conflict' is here, too.

  Configuration: T500 type 2081-CTO, 4 GB RAM, Windows XP SP 3, fully updated with drivers

  Display of the BIOS settings (all other settings are default):

  Main default video device: internal

  Initializing display: Thinkpad LCD

  : Initially graphics discrete graphics, now integrated Graphics

  OS detection for switchable graphics: disabled

  I wondered if the bi-ecrans mapped configuration somehow ATI video RAM so that it comes into conflict with the top of that 4 GB of RAM. Remove a 2 GB DIMM has not helped. However, once the machine has restarted successfully with Windows, the ATI driver has not been loaded (as the discreet graphics card has been disabled) and so perhaps all that has been mapped has not been not mapped? However, I expect memory graphic mapping be reset to zero at the start anyway. And since the video is so completely that screwed up at startup, it is resembling more a permanent hardware failure, in which case the machine back under warranty.

  Are there any other suggestions on how to proceed?

  Best regards

  -The

  The machine came back last Friday - the technology has replaced the video chip, as well as the keyboard, for some reason any. He had also installed Vista x 64; I tried to learn to love it, I really have, but after a few days, I have decided that the benefits outweigh the problems of compatibility, I got with my (admittedly old) version of Lotus Notes. So I reinstalled XP Pro and everything is now back to normal - although I'm not willing to try the external chart again on this machine.

  Best,

  -The

• HP G70-111EA: HP G70-111EA laptop Core2Duo T5800 processor - development options

  Hi all, I have an old laptop HP G70-111EA (product/reference: FX432EA #ABU) with a 360 C 09.67 circuit (to be honest, I have not been able to learn what it means in terms of a system or motherboard) and a Core 2 Duo T5800 processor,.

  I would like to try to upgrade the processor and or anything else that I can, to try to upgrade to Windows 7, or 8 if possible... or even to try a Linux OS like Ubuntu based (as the limitations of Windows 7 and 8 will follow the 'end of the support for the operating system... as in Vista' and disappointing from my favorite Win XP loss!).  And the problem is, I can't find anywhere that identifies the exact specifications of the motherboard, cpu socket set, FSB material and possible cpu upgrade speed limits options, etc. etc that are possible... or at least reasonable for the existing hardware.

  I downloaded the maintenance & Service Guide for the model, which shows a "processor Intel Core 2 Duo (6 MB of cache L2, bus 1066 MHz front)" can support a "T9400 2.53 GHz", but was really hoping to go beyond that, because it is not much better than the current T5800 2.0 GHz (2 MB L2 cache, 800 MHz FSB).

  Memory options seem or PC2-5300 667 MHz, DDR2, 667 MHz, PC2-6400 DDR2-would be the limitations of memory modules motherboard, or any other material restrictions also prevent the change of the memory and change from 32-bit to 64-bit in order to increase the current limits of 3 GB to 4 GB of memory... or is it a fixed limitation built into the system.

  Basically, I'm looking in any way I can increase the performance spec, any help or advice on this would be appreciated.

  See you soon

  The guide shows the T9400 as the top processor of the page. It wouldn't surprise me if a T9600 or a T9800 would work, but I can't guarantee these processors, and there are still enough expensive of course faster than ever. I had a laptop with the T9800 a few years back and it was pretty quick. I also just refurbished two older laptops with T9400 and with a SSD in them that they plow 10 Windows without any problem.

  The max memory is 4 GB, and you can use all of this, if you are running a 64 bit OS I recommend. Even if you are running 32-bit Windows, with two identical modules will alow so to run in dual channel that the sytem can take advantage on a 32 bit OS and memory transfer is about 10% faster and every little bit help.

  Yes, you can use aka PC2-6400 DDR2-800. Memory clock will always be 333 mhz (667 double) and no 400 mhz (double to 800). DDR2-800 is much more widely available.

  Please post back and let us know how your project went.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• C3180: error scan on imac c3100

  How to use the scanner for the first time on an iMac OS X Yosemitie running.

  (Printer works very well)

  Get the error below - have tried to use Image Capture & System Preferences to launch the scan.

  Have worked through the instructions on the help - deleted page & reloaded, checked the firewall (tried with Firewall off as well) - setting device always get the error.

  Any ideas?

  

  Hi DJWatson,

  Thank you for your answer!

  Sorry to hear that the printer is out of warranty. Probably if the printer will not copy, it is a nuisance material. You can try to go through this guide, HP printer does not turn on or respond when the power button is pressed. But if the guide does not solve your problem, I would recommend then please call our hotline to the 800-474-6836 of your upgrade options. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Best regards!