How to change the speed of the RAM on my HP Envy m6 - 1158ca?
Hello
I have a laptop of m6 - 1158ca HP Envy (Intel i7 3632QM @2. 2 GHz) running Windows 8 Pro 64 bit with 8 GB of RAM. Supposed to be 1600 MHz RAM speed, but I don't see that 800 MHz through a third-party tool (CPU - Z).
Are there settings in the BIOS I have change to change this?
Thank you
Véronique
N ° there is no option in BIOS OEM that allow you to change the speed of add-on memory or speed of the bus.
It is an option that is present in passionate desktop motherboards.
Computer Systemboards laptop OEM and microcomputers have less optional parameters.
Best regards
ERICO
Tags: HP Desktops
Similar Questions
-
Re: How to change the RAM for internal video on the Satellite A665-S5060 card?
Hello
My question is how can I change the RAM for my internal video card? I found I only 64 and I want to change it to 256.
I don't want no heavy games, I just want to change to 256.
I tried to change it by accessing the BIOS, but I had no luck with it, no option for this, another way, I could do?Thank you!.
Hello
> my question is how can I change the RAM for my internal video card? I found I only 64 and I want to change it to 256.
No, you can not do it yourself. The system will automatically change to the need for more ram.
-
Tecra A10 - how to change the RAM?
Hello
I was wondering I just bought a new Toshiba Tecra A10, I just wondered how the change of the RAM, it comes with 1 GB of Ram I want upgraded to 2 GB or 4 GB.
The RAM slots are located at the rear of the Machine or below the keyboard?
Any help will be appreciated.
Thank you.
Hello
Memory module compartment is placed at the bottom of the unit.
You can remove the screw clean the lid in plastic and then you will be able to remove this cover and access locations of memory.AFAIK, you can upgrade the memory for max 8GB (2 x 4 GB), but it's not necessary you can upgrade to 4 GB RAM and it is more than enough
Welcome them
-
Want to m6 1310sa: how to change the graphics memory on HP Envy laptops
Hello
I have a HP Envy 1310sa m6, it has an AMD APU of A10 - 5750M with AMD Radeon 8650 G which is 'supposed' dedicated graphics processor. The reason for the quotes is the lack of this gpu provides game performance. I looked online and a majority of the websites say it is truly integrated.
My question is, if it integrated or dedicated I would like to know if it is possible to increase the memory shared/dedicated.
Thank you for the support,
1101001011
Hi @1101001011,
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY Notebook m6-1310sa and questions or concerns, with graphics memory upgrade. Your system is AMD Radeon HD 8650 G / 7670M bi - GPU (2 GB dedicated DDR3 memory) tweaking the system will cause problems and I do not recommend this.
Look into this further I suggest upgrading the memory on the system. You can upgrade to the memory locations 2 16 GB taking the memory card of 8 GB. Here is a link to your service manual page 28.
I hope this helps.
Thank you.
-
E420: Change the RAM Voltage in the BIOS
I just installed two new modules of memory (4 GB), but my laptop recognizes only one of them. I tried to research on how to change RAM voltage in the BIOS to see if that will allow the laptop to recognize the bars of memory, but can not find a way to do.
Can someone please advise on how to change the RAM voltage in the BIOS (specifically from 1, 5V to 1.6V). Thank you.
the RAM voltage can be changed in the BIOS. ThinkPad does not offer this possibility.
-
How to change the settings of the bios on my hp ProBook 4440 dedicated to increase video ram?
I want to increase to play better games.
How to change through the bios I don't know.
Help me pls.
Thank youThe days of being able to change RAM in BIOS went Bye Bye a few years ago. It was back in the day.
You can't make changes to the video RAM settings in BIOS.
You can reduce the resolution if you want to increase performance in a menu of own game options, but at a cost of resolution.
-
How to change the number of values in the hour that are restricted.
Hello
May I know how to change the number of values in the hour that are restricted.
In fact, we have improved of obiee in obiee 11g 10g. Data base is the same for Both.In 10 g the prompt value is limited to show only 35 records per page. As we passed it shows only 35 Records in 11g also. How can I change this limit to 11g.
Please suggest me! Its urgent!
Thanks and greetings
Navnitha
Hello
In the advance tab we have the XML of the upgraded report, copy it into a Notepad and try to find the line beginning as below
In 10g, we have something like below, simply remove the choicesPerPage = '35' from 11 g OBIEE XML report
Thank you
RAM
-
How to change the parameter default slot 'Style layer'-'Stroke '?
Whenever I use "Layer Style"-> "Stroke", the default value is always red for 'Color' and 3.0 for the 'size '. I would like to change the size and the color by default, so that I don't have the change of these parameters each time that I use "Style of layer"-> "Stroke". Anyone know how to change the default settings? Thanks in advance.
Preset animations are the way to go. I have a library of more than 200 that I created to speed to the top of my work. Learn how to create them and use them by typing "create a preset" in the search help field in the upper right corner of the AE and dig through the resources you will find. The first link will get you started: using After Effects | Animation and effects presets overview
-
I have a slide show, and the time is 2 seconds. I wish I had a slide or fade right from one slide to another. How do I do that? I am able to change the pause time, but may not know how to change the transition. Here is the part of the code:
- a.fn.nivoSlider.defaults = {effect: 'fade', animSpeed:50, pauseTime:2e3, startSlide:0, directionNav:true, directionNavHide:true, controlNav:true, is controlNavThumbs:fal, controlNavThumbsFromRel:false, controlNavThumbsSearch: ".jpg", controlNavThumbsReplace: "_t humb.jpg", keyboardNav:true, pauseOnHover:true, manualAdvance:false, captionOpacity:.8, prevTex t:"Prev",nextText:"Next",randomStart:false,beforeChange:function() {}, event: function () {}, {slideshowEnd:function(){},lastSlide:function(){},afterLoad:function()}} "}
I can change the pause time (value 2 seconds now), but I tried to change the animSpeed for: 1 and: 100, but no change. I tried to change the effect: "default", "fade", and
"sliceDownRight" and others in the code below, which is beyond the performed: 'fade' code I'm working with.
if(d.Effect=="Random") {var i = new Array ("sliceDownRight", "sliceDownLeft", "sliceUpRight", "sliceUpLeft", "sliceUpDown", "sliceUp DownLeft", "fold", "fade", "boxRandom", "boxRain", "boxRainReverse", "boxRainGrow", "boxRainGrowR everse") }
Can anyone help?
Thank you
Most widgets have a constructor that allows you to apply changes to the functioning of the widget.
Here is the constructor for the Nivo Slider settings
$('#slider').nivoSlider ({}
effect: 'random', / / Specify defines as: "bend, bland, sliceDown.
slices: 15, / / for the animations of the slice
boxCols: 8, / / for the animations of the box
boxRows: 4, / / for the animations of the box
animSpeed: 500, / / speed of slide transition
pauseTime: 3000, / / how long each slide will show
startSlide: 0, / / Set from slides (index 0)
directionNav: true, / / next & previous navigation
controlNav: true, / / 1,2,3... Navigation
controlNavThumbs: false, / / use tiles for a control Nav
pauseOnHover: true, / / Stop animation while hovering
manualAdvance: false, / / hand strength of transitions
prevText: 'Prev', / / Prev directionNav text
nextText: 'Next', / / Next directionNav text
randomStart: false, / / Start on a slide at random
Beforechange: function() {}, / / triggers before a transition between slides
Event: function() {}, / / triggers a transition between slides
slideshowEnd: function() {}, / / triggers after all slides should have been disclosed
lastSlide: function() {}, / / when the last slide is indicated
postcharge: function() {} / / triggers when the cursor is loaded
});
The effect parameter can be one of the following:
sliceDown
sliceDownLeft
sliceUp
sliceUpLeft
sliceUpDown
sliceUpDownLeft
fold
fade
random
slideInRight
slideInLeft
boxRandom
boxRain
boxRainReverse
boxRainGrow
boxRainGrowReverse
-
Hello
I use JDeveloper with version 11.1.1.6.3. Given my requirment details below.
Suppose I have a (say 'EMPLOYEE_RATING') table in DB with the following structure.
Columns:
1 EmployeeId (Employee Id)
2 RatingType (values can be in Stock or Bonus)
3 RatingLevel (values can be 1, 2, and 3)
Constraint:
EmployeeId, RatingType and RatingLevel all together must be unique.
Requirement:
The customer's requirement is to have two screens of rating (one for Bonus another stock) and display different user interface boards and validations as follows.
1 RatingType is a hidden field, are defined with the default (Bonus or Stock) based on the screen that the user opens.
1. for the Stock screen, RatingLevel label should be "Stock note.
2. for the Bonus screen, the label should be 'Bonus Rating'.
3. for validation, the message must be 'Bonus note level must be unique' or 'Level of Stock of notes must be unique' ADB on the user screen opens.
Implementation:
I have a def EO (for example "RatingEO") and VO (for example ' RatingVO') def. Tips UI (Label) are given at the level of the OS. Also the unique constraint validation is made to EO with the message ' {0} and {1} must be unique, where {0} is source.hints.EmployeeId.label "and {1} is source.hints.RatingLevel.label. I also did the shuttle two different instances of the VO (EmployeeRatingBonusVO and EmployeeRatingStockVO) in the request form (although BonusTaskFlow and StockTaskFlow are set to open with the new transaction, Intension of the two shuttle different named instances is to have the common code in VO. impl class but can run different business logic code by checking the name of the instance of VO)
Question:
Since I have two different pages, I can define two different labels in the jsff, but I can't change the commit message defined at the level of object entity based on open display. At the opening of the screen, depending on the type of screen, I should be able to change the label specified at the level of the entity object. (It should not affect the definition but only the instance). As this entity object cannot be distinguished (if it belongs to Bonus or Stock), I have problem on how to change the indicators of UI during execution.
Any help on this would be appreciated! Thank you.
Rami
Post edited by: rami
I tried your script.
I created the secondary key with EmployId and rating level. I added validation of Unique key. In failure handling handling section of the validator, I gave the error message like: {0} must be unique. For token 0: I gave RatingType (here RatingType is the name of the attribute in OT).
We give the default for RatingType as Stock Bonus in VO. kind RatingType get its value or Stock Bonus based on the original Version that we use.
I hope this helps.
-
Can I change the RAM available on a virtual machine without having to reboot?
I would like to know if there is an option to change the RAM available on a virtual machine without restarting the virtual machine. I saw this old news item that says that it is
possible (http://news.cnet.com/8301-1001_3-10044031-92.html), but I don't know how to do it. Any suggestions?
Thanks in advance.
Arne post, called PowerCLI: toggle the function add Hot VMs, shows how.
-
Hello
I have a latitude E6400 with the A03 BIOS and lastest drivers memory on Vista x 64.
I don't see how to change the amount of RAM assigned to the integrated graphics cards.
How can I change this setting?
Concerning
-
How to change the SGA and PGA in 10g r2 RAC
Hello
How to change the SGA and PGA in 10g r2 RAC, its Linux.Hello
Here's the way I followed to change the SGA and PGA in CARS.
--------------------------------------------------------------------------------
Action plan to change the parameter memory in the environment(5/21/2010) of productionNote:
=====
Practice must be done in the DEV/TST environment before going to Production.
Although the procedure can be applied in the testing environment the evolution of values
used in the test environment should be amended since number of RAM are not the
even between the production and test servers.1 changes to these two parameters in one of
the prod instance, e.g. PROD1
====================================================
Connect as sysdba on sqlplus
--------------------------Change:
ALTER system set sga_target = 28G scope = spfile sid ='* ';
Change:
ALTER system set pga_aggregate_target = 4G scope = spfile sid ='* ';
SQL > alter system set pga_aggregate_target = 4G scope = both;
SQL > show parameter pga_aggregate_target;
-should see the number altered on both instancesChange:
SQL > alter system set sga_max_size = 28G scope = spfile sid ='* ';
SQL > alter system set sga_max_size = 28G scope = spfile;
SQL > alter system set sga_target = 28G scope = spfile;
3 stop PROD database (two instances must stop)
$> srvctl stop database d PROD
$>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the database4. establish the PROD database (two Forum should be high)
$> srvctl START database-d PROD
$>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the databaseconnection in both cases as sysdba to check
--------------------------------------------SQL > show parameter pga_aggregate_target
SQL > show parameter sga_max_size
-should see the number of change always there in both cases
-According to step 1-After confirmation above two parameters are changed on both instances.
-then make the syntax below in a case(5) check that everything is ok
-
How to change the iPhone camera shutter sound 7
How to change the iPhone camera shutter sound 7?
Hello
To adjust the volume of the sound of the camera shutter:
- Use the settings ringer and alerts:
- On iPhone 7 and iPhone 7 more, go to: settings > sounds and haptic.
- (Other models, go to settings > sounds).
- Or turn mute off / on using the switch on the side of your iPhone's ring/silent.
- (The mute function is disabled in some countries).
- Use the settings ringer and alerts:
-
How to change the number of minutes for the exercise of the activity of the application
How to change the number of minutes for the exercise of the activity of the application
Hello
It is not currently possible to change the goal of daily exercise.
If you want to suggest that Apple consider adding this option, you can submit a request here:
Maybe you are looking for
-
What happened to my screen?
Just recently got a Macbook Pro and I do not know how the screen obtained like this: There are vertical black, green, yellow, blue and purple bars making the left side of the screen. Can I do about it?
-
I can't build a distribution kit, because the Builder seems to have saved a path to the NI Variable engine that is not valid. I seem to have the Variable engine OR installed. There is NEITHER Variable engine 2.5.0 fichiers.xml loaded on my compute
-
Wireless network option is missing after the virus attack.
Original title: restore wireless... After the restoration of xp following an attack virus (cridex.e among them), I have no wireless network option. Essentials of security has not detected any virus 4 who were present.
-
text in word / excel / wordpad does not print
Hello, I bought a printer 'HP deskjet advantage ink' a year back, and until now, it was absoluetly work very well. Not sure if any operating system or Microsoft Office update has screwed up. Everything seems fine - printer is offline, print poster ok
-
The CSK password specified is not valid.
Hello! I am creating an application web wrapper that points to a fixed URL. The application seems to work fine in debug mode. But I can't get the signed Release version. I use: WebWorks 2.0.0.54 32 bit Java 1.7.0_45 BB10 Device Simulator BB10_2_1.192