HP envy 14 investigation of recovery disk

Similar Questions

• HP ENVY 17 t-j100 QUAD EDITION: ordering of recovery disk

  To the right:

  I have no system recovery partition (drive D :)) on my PC. I have no way of recovering my PC if it breaks down, if I catch a virus or corrupt files. Do you know how and where can I order a recovery disc? Do you know how much it would cost me? I would be grateful if you can get back to me on this issue as soon as possible. Thank you for your time and your support.

  Sincerely,

  Joey Michael Roddy

  Hello

  What you can do if you are unable to create recovery disks is to contact your local HP support and ask them to order RCD for you or go to this link below and you can order online.

  https://h10025.www1.HP.com/ewfrf/wc/mediaOrder?cc=us&LC=en&productOid=6521534&softwareitem=749603-00...

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-notebook-PC-series/6521474/model/6521475#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Envy Touchsmart K204TX: Envy K203TX recovery disks can be used to retrieve a K204TX feel like?

  Hi, the first thing I did when I got my Envy cell phone, K203TX, was to create a set of recovery disks.

  Then I discovered that the laptop has several questions.

  HP sent me a technician on-site, and technology, said these problems were caused by a material defective number (display board, motherboard and the case has a defective battery lock). It helped me to return the laptop as DOA.

  The problem is, HP store couldn't make me K203TX one another, I paid like $150 and upgraded to a fancy K204 TX.

  I have now the 204TX and this laptop has no problem at all, it's as good as it can get.

  My drive recovery K203TX of envy is always with me.

  Question > can I use these discs to recover my K204TX disaster? Or I'll throw these drives and create a new set of recovery disc for this computer?

  @johnwinchester

  The 203 was 15.6 "diagonal FHD (1920 x 1080) WLED glare-backlight

  http://support.HP.com/us-en/document/c04529223

  The 204 a 15.6 "diagonal FHD WLED-backlit touch screen (1920 x 1080)

  http://support.HP.com/us-en/document/c04529254

  I would like to put the old discs but do a new series of the new laptop as he has touchscreen.

  REO

• Recovery disks contradictory w / upgrade HP Envy 17 3D [HDD-> SSD]

  Hey everybody!

  I have a HP ENVY 17 t - 1100 CTO 3D Edition laptop with Windows 7. He had two hard drives in it, 500 GB a piece. I just put the primary HDD with a SSD Samsung 840 Pro Series drive. Before I did the swap, I did recovery DVD from my system. I am able to get to the Manager of HP recovery during the boot sequence, but the ability to perform a factory reset is grayed out. Because I can not install my HP Win 7 DVD, so I did a fresh install of Windows 8.1 in the meantime. But I still prefer to use my recovery disks because the 3D work well with Windows 8.1. My drive is of type is Basic.

  Thank you

  Recovery discs are usually working on a smaller than the original hdd. An option could be reducing the C partition on the original hdd to the SSD size and then clone it to the SSD.

  Or - you can copy the folder the original hard drive on a DVD or a flash drive SwSetup, use the installation programs of the drivers/software on a clean install of Windows 7.

  =============================

  If you can read the Microsoft Windows 7 of 25-character license key, you can download a Windows 7 ISO file to burn to a DVD or USB flash drive. The version must match that's installed on your PC as shown on the sticker COST Microsoft fixed on the bottom of the laptop. Like Windows Home Premium.

  Links to downloads of Windows 7 ISO files:

• Envy 17 k299nb: Windows 8.1 on "new" laptop wants the recovery disk 32 GB

  Hello

  Bandnew laptop, turned on for the first time.
  First thing I want to do after installation, is to make a recovery disk.
  When you choose this option, the laptop wonder a 32 GB flash drive 'at least'.
  How can this be since it has "new"?

  And more importantly, how I can reduce this amount of memory needed?

  Access performance and USB drive is so terrible in this notebook I have to wait for hours!

  THX

  This has nothing to do with the laptop being new. It is just a part of the initial report of installation and can be ignored for now, if you don't not available now.    Just remember you need to do the recovery at some point media.

  You can skip the creation now and create it later.

  If you want to have external recovery media access, then you will need to follow the guests will tell you. Do not save anything in the recovery partition!

  You can access more later by invoking the charm of research and typing in HP recovery. Click the icon to create HP recovery media to start the process.

  It won't take hours to make the usb recovery media. Access USB is fast, especially compared to the access of the DVD media.

• Envy 15 product no. F4J08L #ABM: accidentally formatted hard drives, including the recovery disk

  Hello I need help really bad, including recovery disk has been deleted accidentally any disc, I don't know how to install the operating system, as it was before.

  Try this:

  http://support.HP.com/us-en/document/bph07143

• Envy of HP dv7: upgrade of manufacturing after Win10 recovery disks

  After the upgrade to win 8 ot win 10, can I followed the original instructions to create a new set of recovery disks?

  Hello

  HP Recovery Manager only allows you to create 1 set of recovery media for the original operating system supplied with machine.

  However, there is another option, you can use.

  As long as the current installation of Windows 10 has activated Ok after upgrade from 8.1, you can create any media that will allow you to perform a new installation of Windows 10 If you need.

  For a guide on creating it, see the following link.  Note: If you use this option to perform a clean installation of Windows 10, to the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Dv7 - 7333cl envy: Boot Device not found (3FO) after 8 of Windows Restalling of recovery disks

  Hello

  The hard drive on my dv7 desire - 7333cl just died after upgrading my windows 8.1 to 10. I bought a new SSD and I replaced the drive. I could not find the recovery discs, that I did when I got the PC, so I ordered new HP according to the recommendations of other threads with the understanding that they would be able to reinstall windows on the new drive.

  Given the shipping time would take a long time, until I tried to reinstall Windows 8.1 using the file .iso Windows 8.1 image official of Microsoft. It seemed to install properly, read the product automatically key and everything, but I could not get the machine to start, so I decided to wait for the HP recovery discs.

  Well I had the disc a few days ago and reinstalled the original image on the new drive. Problem is that when the computer reboots, I get error no matter what I try. The errors vary according to which of the steps I tried below, but I was never able to start Windows, except once when the Windows 8 BSOD loops and restarts automatically before I can even read.

  Here are the steps I've already tried:

  -Performed a hard reset (power adapter and battery removed, taking the power for 30 seconds button)

  -Run the diagnostic system HP based on the SSD (spent) and memory (spent)

  -Secure boot disabled (and re-enabled, cleared the keys, keys reloaded, etc.)

  -Enabled legacy support (and disabled)

  -Bios reset to original settings (F9) is then repeat above steps in various orders

  -Reinstalled two times more than original image

  At this point, I was wondering if the drive has not been formatted from the recovery disk and multiple files to start causing problems, so I started in Parted Magic with UBCD and reformatted the entire hard drive (0 s to write to disc) and again reinstalled original image. Still nothing so I told all the steps above in random orders to try to turn it on.

  If I start in the boot options, I can see the SSD, but it still won't start. Does anyone have more ideas for me to try? The fact that it passes all the tests and that it is running the Linux of Parted Magic environment suggests that everything works fine, but for some reason any Boot file does not load.

  Did I lose money on the HP recovery discs and he just bought my own Windows OEM license?

  I'm going crazy trying to figure this out. I am relatively experienced with the PC, but it's my first time work with the architecture of the UEFI Windows 8 so maybe there is something obvious that I'm missing?

  Thanks for any help.

  FINALLY SUCCESS!

  After a lot of frustration and several reboots, partitions, reinstall, and trips to Best Buy, that I care to remember I'm typing this from my stable work feel LIKE to the point Windows 8.1. Currently 10 Windows to download and install all updates, but everything seems to be stable.

  To make a long story short:

  -Be sure to carefully read the product manual

  I never would have guessed that this system would support only a 160 or 180 GB SSD. If I had of known that I would have probably never had any serious problems.

  -Instead of order recovery HP discs just to download the ISO of Windows 8

  I'm not the first person to have problems with these discs (search this forum for the many complaints), so unless desperately want the included HP tools and bloat, just to get a file from Microsoft (FREE!). There is no reason why it shouldn't work and I wish I would have went with my gut here and saved a bit of money.

  -Be persistent if you can't find the question

  I was told, many people, that the machine was bricked up. At that time, I was obsessed with the implementation because no one could tell me why it would not.

  Thanks for reading! And if you encounter a similar error, good luck.

• Envy of HP dv7-7390eb: HP Envy dv7-7390eb recovery disk

  Does anyone has a HP dv7 want recovery disks?

  Thank you

  You can order from HP.

  The cost is usually about $30,00 USD

  Order a HP recovery disk

• 700 - 215xt envy: get recovery disk fo 700-215xt

  Hard drive had bad sectors.  Cannot run the HP Wizard. D: unknown partition status.

  I would like to get the recovery disks.

  Each path, I took in the support to try Web site and order recovery disks ended in a blank page.

  Help, please!

  Randy

  It is just that it's maybe a browser problem to me.

  W8.1 and IE11 ended at white pages.

  Chrome is OK, and I was able to order the disks online.

  Thanks again.

• recovery disks

  I had a problem with my new cell phone Envy 15 so I ordered the recovery disks and they came yesterday.  I tried recovery only to be told by the recovery disks that they bear not my laptop.  I chose the only option available when ordering the discs.  Number BDLR1514 of command.  I would like to send you appropriate as soon as POSSIBLE recovery disks.

  Thank you.

  This forum is not monitored by HP and you aren't going to get someone here who is associated with the HP to support you in what you're asking here.  You connect the HP Technical Support and they know the issue you are experiencing and getting them to send you the correct recovery disks

• Satellite L505-141 - recovery disk contains Windows 7 32 bit

  Hello

  I bought my computer in the year around March last. I had with laptop computer operating system is Windows 7 Home Premium 64-bit. Lately I think the format of my laptop using the recovery CD that I have receviced with the laptop. I don't know why, but the recovery CD Windows 7 Home Premium 32 bit! Why its not 64-bit and 32-bit?

  The laptop comes with 6 GB of Ram and Core i5 and I won't enjoy my laptop with 32-bit operating system. Is this normal? I was suppose to get the 32-bit operating system (really wired if you a laptop with 6 GB of memory). This really makes me feel angry. I feel that I have been cheated.

  If ts the company I bought the laptop in and not the fault of Toshiba, I ask and investigation or something like that since they really make a bad name for you guys.

  Please answer me as soon as possible.

  TNX,
  Andrei Braunstein.

  Hello

  Before you wrote things that are not correct, please first check the specs on the Web from Toshiba site and take a look at your * user manual *!

  The laptop comes with a recovery disk which is Windows 7 32 bit, so everything is ok with this disc and you got the right pair.

  The interesting point is that the recovery disc for Windows 7 64-bit, you must create yourself such as mentioned in * user manual *! You can create this disk preinstalled use Toshiba recovery media creator. You need blank DVDs to create discs and that s all. After that do what you can to restore the preinstalled Windows 7 64 bit every time when you want to.

  Now it s too late to do that, but you can order a recovery disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

  I can understand you he would do better to use Windows 64 bit on a laptop with 6 GB of RAM but don t forget some old don t on 64-bit applications and 32 bit necessary. In addition I m wondering you n t saw a message that reminds you to create the recovery disk. This message that you get after you first start your computer:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Reduction in size of Envy 4, Windows 7 recovery disc

  Hello

  The product is a HP Envy 4-1015dx. My recovery disk is almost full (2.9 GB left of 19.3 GB).  I am concerned about the problems that arise when the remaining space is used. Is there a way to 'clean up' so that more space is available?

  Thank you

  Check that the protection system does not have system restore image files of control point of the recovery itself partition. This is what is usually the cause of a recovery partition filling. He shoiuld always the same size when you received it.  The following image shows how it should be correctly setup.

  

  There should be no other files as seen in the following image.

  

• Can someone please create recovery disk for my laptop I NEED of CE HARD

  I need a recovery disk for my...

  Windows 8 Pro

  HP ENVY 6-1047CL Sleekbook

  (with audio beats and beats solo HD)

  can anyonw with the same phone as me being kind and create a disc of recovery for me?

  im just trying to get back to windows 7 and then re-development level

  THANKS IN ADVANCE

  Hello

  If nobody is able to create a recovery disc for you, you can always order in the following link, I must just fill in instructions:

  http://www.best2serve.com/page/rcd_landing

  Or that your laptop can be Vlachs these disks can be sent free of charge if you contact support technique hp of your country.

  Best regards

• ENVY 15 3040 nr recovery disc does not

  Hello

  I made a recovery disk set as soon as I bought my ENVY 15. I accidentally deleted all partitions, then tried to recover by using the disks that I did... but I get this error by...

  The system recovery media does not support this computer.

  You are not able to restore the system with the media.

  0110 A9P60UA #ABA - A9P58UA #ABA

  Help, please!

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K