HP Envy 15 - numlock?

Similar Questions

• NumLock on HP Envy 17-1050ef

  Does anyone know how to activate the num on the HP envy 17-1050ef key?  It doesn't seem like a NumLock on the keyboard and the numeric keypad is not activtated.

  I found a solution (see below) but first I think that I must examine the solution proposed above.  First of all, I don't have the stuff of active quickweb and won't go to all the hassle of which allows him to see what is happening there.

  Second, rebuild my system for what is obviously a temporary solution is one of the silliest applications that can bring a support person.  You don't have to be a genius to know that this will only fix this problem until it happens again. However, this is the type of the suggestion that I would expect of a person concerned only with their immediate "the resolution numbers" and with no long term interest in the customer satisfaction.

  It's okay that HP "designed" the keyboard when it reports to the operating system as a 101 key keyboard normal.  In this case the OS assumes that it behaves like one, and that includes a double function - the keypad controlled by a num-lock key.

  I did a little web search and find quickly found that the windows API includes a way to define the State of the Numlock.  This means there is a parameter inside the BONE, which reflects the State of the button, and also in now way does not provide the key on the keyboard class to change this fact.

  More importantly, it means that the software can change the State of the key.  If some programs (like a game) you run could toggle the CAPS LOCK status.  ANY program can do that and it's perfectly "legal" because what they are doing is using the API that provides some Ms.  So surprise, software "reconfigure" the number pad by simply changing the State of the num-lock.  HP has not provided that some software could change the State of the numlock, and this could create problems for users, is one of their biggest blunders in the design of this keyboard.

  To make our life more fun, it seems Windows 7 tries to "remember" the State of the NumLock key to stop and that he will restore this setting when windows is started.  "" This means that there is no hope for a restart in the config default OS fix this problem once the numlock status has been disabled.

  In any case, I found another user in a thread on a forum Microsoft on this same question and answer it describes how to change the security settings on the portion of the registry where windows stores the current state when stopping down, if you are comfortable following these indications thirn (I have not yet tried) in theory This allows to set this registry value so numlock is always considered as WE at startup and windows cannot "remember" any other parameter (must some programs turned off)

  The thread is here: http://social.answers.microsoft.com/Forums/en-US/w7desktop/thread/7da81412-d7bd-491b-98c9-027594d67232

  Softpedia also has a program to set the State of the NumLock at startup http://www.softpedia.com/get/System/System-Miscellaneous/Set-Numlock-State.shtml

  In terms of being able to toggle the State of the numlock invisible, so you can "fix" things at the time where a program modifies the NumLock State, it is your solution

  Copy the following text in Notepad and save it with a name as "numlock.vbs" running it will reverse the State press the NumLock within the OS.  NOTE that the name MUST end in. VBS this identifies as a windows script file and runs using the windows scripting host (WSH)

  Set WshShell = CreateObject ("WScript.Shell")

• Activate the NumLock at startup - like X 360

  Hello

  Is there a way to activate the NumLock at startup for HP envy x 360?  It's frustrating for him, I use the method of axis on windows 8, simly because his character only 4 and I don't have to hit enter. There is also no light on the button to indicate its status.

  The BIOS details:

  Insyde, version: F.06

  Exit the: 12/06/14

  Hello @wmhp ,

  Welcome to the HP Forums!

  I appreciate that you try to find a way to activate the NumLock feature on startup.

  Try this simple regedit:

  1. run the registry editor. (Windows key + R, regedit, OK)
  2. navigate to (and click on) HKEY_CURRENT_USER\Control Panel\Keyboard
  3. change the value of the InitialKeyboardIndicators from 0 to 2.

  NOTE: Always back up the registry before making changes. Make it open regedit window and click file > export... Save the file to a location that you will remember. If something happens after editing the registry, you can start in safe mode and Open regedit to import the backup version.

  The registry should remember if the NUMLOCK is turned on or off when you turn off your laptop. Make sure that the NUMLOCK is turned on before you turn off your PC.

  Let me know if it works for you.

• HP Envy TS: Num Lock key

  Num lock key will not work. It sounds right, alternating up and down. Numbers on the numeric keypad do not work

  Maybe some sort of sticky key?

  I did a hard reset - did not work.

  Uninstalled and reinstalled the keyboard driver - did not work.

  Help, please!

  Hello @RBones2016,

  Welcome to the HP Forums!

  I read your message and understand key NumLock does not work on your laptop, HP Envy. I have studied the issue and have developed a possible resolution. First of all, please perform a reset. Once this is done, please follow the steps described in this document:

  HP - computer keyboard laptops laptop troubleshooting (Windows, 10, 8)

  If the document does not have you helped to solve the problem, try to restore the BIOS , then check the updates of windows. For more information please provide your product model using the link 'find my product'.

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• ENVY 13 laptop t: pad on laptop ENVY 13 t

  I just got this phone and I can't figure out how to use a digital keyboard. On my laptop since I had to do was press the function key and I would be able to access the numbers on the U, I, O,... >,? keys. This keyboard does not even show the numbers on these keys. I hope someone tells me there is a way around it, because I would be very annoyed if there is no pavement on this laptop.

  Hello @VirginiaC,

  Welcome to the HP Forums!

  I read your message and understand that you are trying to enter ASCII without a numeric keypad on your HP Envy 13. I have studied the issue and have developed a possible resolution. As mentioned previously, this model doesn't have a normal display of digital pad, but there are two possible ways to do so.

  Method 1

  1. Open the on-screen keyboard

  2. click on the key onscreen keyboard options

  3. turn on the keypad

  4 activate the NumLock key

  5. use your alt key and the screen, numeric keypad that you would be physical

  Method 2

  1. use the search on your computer for "character map."

  2. open

  3 copy and paste the characters according to the program that you are using

  If the steps do not resolve the problem, try to restore the BIOS , then check the updates of windows. For more information please provide your product model using the link 'find my product'.

• Envy 15 1060ea power not on

  Hi all

  Recently, my envy 15-1060ea notebook turns off when I was 1-0 against Real Madrid on Football Manager with hearts (true!) and will not feed back.

  I've done a hard reset, now when I press the power button the next charging light the AC input power blinks 3 times (which, according to HP customer support for Web pages, indicates a problem with the RAM)...

  .... I opened and replaced the two modules of RAM to brand-new, did another hard reset and IM STILL GET 3 FLASHING LIGHTS and no start.

  If anyone has had this problem or knows how to help me here?

  Im having withdrawals FM and think that I could kill someone if this is not resolved as soon as possible.

  Any help would be greatly appreciated.

  See you soon

  Scott

  Hi @scottymutt,
  Welcome to the HP Forums.

  I see that you are having a problem getting the laptop to power on. I will try to help you with this.

  I had to look at the issue, I thought something was far from where you led with flashing codes.

  Flashing capslock or numlock, would do anything in this table:

  LEDs near blink of caps lock shift keys and digital lock when starting laptop

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops. The number of flashes of the sequence indicates which item caused an error when it was tested when starting upwards.

• Pavilion 17z-F200 CTO: How do I change turn on the num lock (NumLock) key have a State by default to it?

  How do I change turn the num lock (NumLock) key a Pavilion 17z-F200 CTO to have a State default one?

  System BIOS has no setting for it. By another post, I tried to set the value of register in HKEY_USERS\. Default\Control Panel\Keyboard for "InitialKeyboardIndicators" of "2147483648" to "2147483650. It seems not to change after a reboot.

  Yes, the BIOS settings was the first thing I checked. But BIOS seems to only contain States in order for the locks of keys on the new HP Pavilion or Envy laptop.

  I did more research and found more credible sources to TechNet asking to change the same registry value to 2. I tried it and it works a fact/do.

• pictures 1.0.1 quit unexpectedly after printing on HP Envy 5640

  Hello

  I just bought a HP Envy 5640 printer.

  It works very well, but every time I have to print a photo in Photo 1.0.1 NICU OS X 10.10.5, Photos will be leaving after that print is sent to the printer.

  The photo prints fine, but needs pictures to be restarted every time.

  Does anyone have the same problem?

  Any solution?

  Thank you.

  I've not seen posted here - but since you are more than a year behind in updates, bug fixes and new features, you can see a verry old bug that has been fixed many years ago for people who follow to this day - unless he ia a clue right for you m = not updated I suggest you backup and update of OS X Sierra = and Photos 2.0 - this never can solve your problem

  LN

• I have a MacBook Pro, who hates contact my HP Envy 7640 printer all-in-one. Printing can take as long as 10 minutes! If it prints at all! Does anyone have similar problems?

  If I use my iPad to print a photo there is no problem, but if I use the Macbook for the same function, it will be either print it after a long period of time or he'll quit and say "Printing cancelled!" It seems that these problems started after the update. I am running El Capitan 10.11.6. In addition, when you use Hallmark Card Studio for Mac, as soon as I use two back, it will print the first side no problem and then he hangs up and ends by spit the paper without printing the second side! When I got to the printer, everything worked fine, but now...

  Maybe:

  e-with-OS-El-Capitan/td-p/5417344 http://h30434.www3.HP.com/T5/Printer-Software-and-drivers/HP-Envy-7640-compatibl

• How to print multiple copies on a HP Envy 5540

  I'm running OS X 10.7.5. on an iMac. I recently bought a HP Envy 5540, connected wireless printer. It fails to print more than one copy at a time. I see nothing in the software or instructions to change it. Help please!

  It is not clear, put you number of copies in the boxes of Copies and pages?

  Can try this...

  Startup HD, (operation key shift key down to start), run the disk utility in Applications > utilities, then highlight your reader, click on repair permissions.

  All devices which appeared already in your list of printers and faxes list should be added again after resetting the printing system.

  Reset the printing in Mac OS X 10.5.x system +++

  1. To use the reset function of printing under Mac OS System X 10.5.x, follow these steps:
  2. Choose System Preferences from the Apple menu.
  3. On the view menu, choose Printers and faxes .
  4. Control-click on the printer list on the left side of the window, then choose "Reset printing system" from the context menu. If you don't see the list of printers, Ctrl-click on the text "click on + to add a printer or fax" and select "reset printing system...". »
     
     As an alternative, if you have one or more printers from the list, you can click the "-" (deletion of printer).

  http://support.Apple.com/kb/ht1341

  Reset.

• ENVY 15: HP Support Solutions Framework Service - high CPU usage

  ENVY 15, 10 Windows version 1607

  CPU cycles was about 50% this morning and discovered that the HP Support Solutions Framework service was 40 + % permanently.   No problems so far with high utility usage.  Problem started not with the update of the birthday that was filled with 4 days and there are several reboots.

  At a chat session with HP support, but they couldn't help.

  I stopped running - task seems to restart every time I run the HP support assistant and continues with + 40% of CPU usage.

  Any suggestions please?   Y at - it an update utility that I have to download?

  Uninstall HP Support Assistant HP Support Framework in Control Panel > programs and features

  Then, reinstall the latest version of this link

  http://h18021.www1.HP.com/helpandsupport/HP-self-support.html

• HP ENVY m6-ar000 x 360: HP Envy m6-ar000 x 360 Convertible PC Wireless Connection Disconnects frequently

  Hey everybody,

  My PC Convertible HP ENVY m6-ar000 x 360 Wireless disconnects frequently.

  What can I do to fix this?

  Thank you

  Bill

  Hey Bill,.

  Following our normal wireless troubleshooting tool is the best way to solve almost all of the cases, but with this specific model with the AMD processor jump directly to make sure that update BIOS F.06 or most recent would be necessary.

  HP ENVY Ar000 M6 X 360 PC Convertible - WiFi disconnects frequently

  http://support.HP.com/lt-en/document/c05144863

• HP Envy 4500: HP Envy 4500 reset admin password

  I just bought a new HP Envy 4500 and impossible to access many functions through the online web interface IP address. It keeps to a secure https version and then pops up to ask for a name and a password.

  I tried using admin / admin and a lot of variation with no luck.

  Any suggestions or help on this?

  Thank you.

  Rainbow7000 nailed you. I'm in place and operate properly. Thank you for your quick response to my question.

  See you soon,.

• HP ENVY 7640: failed to update for windows 10

  I had this error on update, I have windows 10

  • Error of Hewlett-Packard - Company WSD multifunction printer, MFP, HP ENVY 7640 of material other series - Null Print - 0 x 80070103

  • Update driver HP for Fax - series HP ENVY 7640 - error 0 x 80070490

  Hi, Hello!

  Thanks for sharing this request in this forum.

  Please, try the following steps and hope this helps!

  1. Go to settings-> devices-> devices
  2. Click the Device Manager link at the bottom of the screen.
  3. Open "printers".
  4. Then uninstall/remove the "unknown device" if present.
  5. Restart Windows 10 update.

  Thank you and best regards,
  meg0316
  
  I work in HP, but I am personally.

• HP Envy 5640: Missing emails 'subject '.

  When I send an email from a Google account to the printer using the address @hpeprint.com, the body of the text of the email is printed, but the "subject" is not printed.

  Can you please help.

  Hello

  It is exepcted, the ePrint print mail attahed content or supported only the files, not the subject of the e-mail:

  Type a subject in the subject line. An empty e-mail subject line can cause the HP ePrint Server cancel the print job.
  
  E-mail subject lines do not print.

  http://support.HP.com/us-en/product/HP-envy-5600-e-all-in-one-printer-series/6583033/model/6583034/document/c03721293/

  Kind regards

  Shlomi