ENVY 13 laptop t: pad on laptop ENVY 13 t

Similar Questions

• Want to (deleted) HP: Hi! my laptop is wifi HP envy laptop, battery, mode of touch problem

  Hello! Please please help me troubleshoot my Hp envy laptop. I have an imenusing hard since I bought it 4 months ago.
  
  1 wifi turns off and it takes time to turn on. Only the airplane mode will appear in the network connection.
  2. the battery will easily to consume even if only I always shut it properly.
  3. There is an instance of the function of touch pad didn't work (zoom in and zoom out)
  
  I hope for your immediate response to the above issues. Thank you.

  Hi tardis, regarding the upgrade. The problem is that I can't by the Recovery Manager window that says "inconplete restoration", I tried Jo turned it off the laptop, but it still run recovery and it will always end up with the same window. Meaning, I can't go through my main desktop to search and open for windows update. Is there another way? I'm stuck with this box of the Recovery Manager window.

• HP simple pass into the computer laptop dv7 hp envy

  I recently bought a HP laptop, Envy of dv7 select edition. The HP Simple Pass showed on my computer is suddenly your index, however, this computer is not a touch pad system but one where I have to use the keyboard. Can I install the HP Simple pass using a keyboard rather than using your finger?

  Hello chaz1939,

  I understand that you want to know how to configure the HP simple pass.

  Your laptop must have a reader of fingerprints on the lower right corner.

  Here is a link to a document to implement the software.

  I would like to know how everything goes.

• Hall 13: HP pavilion laptop does not connect to the printer HP envy range 7640

  My laptop does not connect to my HP envy printer. It keeps saying the driver is not available or is it ready, but does not connect. I know the printer is working because I can print from my phone. Anyone know the driver I need to download or what to do?

  Ruizgeraldine

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problems with your Envy 7640 in Win10 printer and wanted to help.

  The problem is that by default HP print drivers installed by the upgrade of Win10 often do not work.  I have two HP printers and neither one worked after the Win10 upgrade.  We also receive a lot of messages of other people with the same problems.
  
  I linked the page drivers and software for the Win10 drivers for your printer: http://support.hp.com/us-en/drivers/selfservice/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  You must download and install the full feature software and drivers for the printer.
  
  Then unplug the printer and install the software.
  
  Do reconnect the printer until the installation program invited to do so.
  
  Once the installation is complete, restart.
  
  You should then be able to use your printer in Win10.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• HP ENVY 15-k046nd Notebook PC: laptop upgrade

  Hello
  
  I'm ready to upgrade my laptop, but I wonder what processors and memory, I can use.
  
  Thanks in advance!

  Hello

  " Maintenance and Service of Guide" at the following link will give your all the information you need:

  http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/6936206/model/7185543/manuals

  Kind regards.

• HP ENVY laptop - 13-d022tu: laptop lags when it is plugged

  Laptop works fine when on battery, but when I plug it, the laptop of begins to lag, and my games have a constant 20-24 FPS. I have also noticed that when the laptop is connected to 80% or higher it don't hang out, however, when I plug it to 20% or more, the laptop everything is lagging.

  Hi there @malktee,

  Welcome to the Forums of HP Support!  I understand that your laptop rowed when connected to the charger, and that you have noticed that this never happens when the load level exceeds 80%.   I'm happy to help you with this.

  From your description, this fix seems custom-made for you: HP ENVY laptop - the computer is slow or does not respond while that connected to the charger. As you can see that he mentions about the same problem but the break is 60% or less.  Try it and tell me if that solves the problem.

  If it doesn't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

  I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

  Hello @MAlex_B,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

  Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

  Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Laptop HP Envy M6: problem with hinges on the m6 HP Envy laptop

  I bought the laptop M6 Envy in 2014 for my daughter and it is now coming apart at the hinges of the normal level

  wear and back, she of afraid that if she continues to open & close it may collapse, but to use for school, please advise if there is a recall on this product or how can I fix it.

  @Alexenvy

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  
  
  
  Thank you for visiting the Forum from HP Support.

• HP ENVY laptop - 13-d045tu: BCM43142 change on Envy 13 wifi card

  My laptop is currently using

  Combination 792608-005 BCM43142 of Broadcom 802.11 wireless network adapter b/g/n 1 x 1 Wi - Fi and BluteTooth 4.0 m2

  There is problem of BOUNCING on Windows 10 wifi connectivity so I change to another card and at the same time offering an AC 5 GHz connectivity.

  One of the options I'm considering is Intel AC 7265 (HP part no 793840-005) that comes standard in the variant of other Envy 13 sold elsewhere.

  Newer that I am wanting to NGFF Intel Dual Band Wireless-AC 8260 (8260NGW)is another model.

  Can anyone tell if there are fears white list on the question if these cards above would work on my laptop?

  Should I get the AC7265, I get the part specific HP itself or the Intel will do?

  Thanks in advance guys!

  Hugo

  You can safely assume that any HP laptop with a 4th generation Intel Core processor or newer has no whitelist wireless and yours is 6th generation if you are safely beyond the question of the white list. However, the real problem comes another question HP Wireless: the single antenna module, which is now installed in most HP laptops. Most of the 1 x 1 b/g/n modules have only a single antenna that makes it impossible to get to something that works in the 5 GHz band.

  Here is the Service Manual:

  Manual

  See p. 31. The manual shows 2 antennas and I hope that's right but the only way to be sure is to open and just look. If you see a single antenna wireless, I shut up and look for a usb dongle that is compatible with 802.11ac. Or prepare for a complete teardown add a second antenna.

  The AC 7265 is good enough, if you have two antennas to support.

  You also might as well get the variant of HP that HP has a big enough market share that are still lacking these autour and they do not cost more:

  http://www.eBay.com/ITM/793840-005-HP-M7-n014dx-WiFi-wireless-card-grade-A-/152185328469?hash=item236ef3d355:g:l6wAAOSwbsBXmpM3

  Here's the 8260 AC just in case:

  http://www.eBay.com/ITM/HP-840-G3-Intel-8260NGW-dual-band-wireless-AC-NGFF-867Mbps-WiFi-card-806722-001-/331902194642?hash=item4d46e993d2:g:rd4AAOSwOVpXfWMb

  I don't think that one is bluetooth, but this one is:

  http://www.eBay.com/ITM/Intel-8260AC-NGW-dual-band-2x2-wireless-AC-Bluetooth-4-0-m2-HP-806721-001-8260-/231934836737?hash=item360064c001:g:GJ4AAOSwKfVXGR2R

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• The HP Envy 15 t laptop: broken left hinge, corner of laptop is cracked and opened.

  Hello

  My laptop HP Envy 15t broken left hinge and the left corner is cracked and bulging. The laptop has not declined or fell. When I open and close the laptop the hinge moves and then separate tiny capitalization. The tiny screw are falling and I'm not able to close and open the laptop properly. The warranty has expired on this laptop. Help, please.

  Thank you in advance.

  @Albert5

  The question of the hinge on the Evny of HP is well known to HP, and yet they refuse to do much, if anything, to this subject.  If you are in warranty, they will typically set for free, no questions asked.  Out of warranty, however, it's like a completely different society.  They will be responsible of very varying amounts, from $130 to $300 to fix their own design flaw.   Here is a link to a long thread that I started to update others on the issue and my relationship with HP:

  http://h30434.www3.HP.com/T5/notebook-hardware/defective-hinges-on-HP-laptops-envy/m-p/5378336#M204440

  We hope that you will find useful information.  As further evidence that HP is aware of their own design flaw, the new 17 "want to have a case completely redesigned with a much better hinge.

  Good luck!

• Envy 15-j140na: black laptop computer at startup screen

  HP ENVY 15-j140na
  Product no: J0B97EA
  2 years
  
  When I try and turn on my laptop, the screen does not turn on.
  
  The fan comes on full power for a second or two then quit entirely. After 10 seconds, the fan can be heard gradually increases to a normal level. Meanwhile, no activity on the screen.
  
  The power light is on with the wifi led
  The led caps lock flashes in a sequence of flashing 2 with a long interval between
  
  I tried:
  hard reboot
  BIOS reset by pressing win + B keys when you press the power button, but it doesn't seem to do anything
  
  Any help would be appreciated

  I solved this by downloading the update to the bios on a USB key and plug that while doing a startup in the bios. My laptop is now working well

• HP ENVY laptop - 15 - ae101no: control of the Volume on the keyboard keys do not work!

  Hello

  Volume control keys had suddenly stopped working, and I have no idea why. I have the model HP ENVY laptop - 15-ae101no (ENERGY STAR). Could you please help me fix it? Thank you!

  Hello

  Try the following.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74867.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72105.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter and then hold button power supply for 30 seconds, then release.

  Plug the power adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Beats Audio Driver for laptop HP ENVY 6-1002tx

  Hello

  When I bought the HP ENVY 6-1002tx Notebook PC, it works on Win 7 and works perfectely. But after the upgrade to windows 8 Pro I lost the audio driver Beats. System is still having IDT high definition Audio codec, but I want the original Beats audio for my laptop.

  pls help

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58635.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 8.

  Once done, press and hold the SHIFT key when you click shutdown , completely power down the laptop,

  When the laptop is turned off, press and hold the button for 10 seconds.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• HP Envy 15 t (G0T59AV): HP Envy laptop speaker poor sound quality (particularly acute) as the volume increases.

  I had been without my HP Envy laptop a few weeks after he bricked on me and I had to send in for repair, and when I came back the sound quality seems to be noticeably worse than what I remember. The sound in general seems a little intestine initially, and it does not handle certain tones fine treble, producing shrill notes that almost seem like they're clipping or something, as if it's too much for the speaker to manage. The volume level refers to it - it's much worse at higher volumes, but its volumes, it should be able to manage, and has dealt in the past. 30 is basically normal, I'll hear parts of it start happening about 40 volume or so, 60 sounds evil, and 80 is almost inaudible.

  My first suspect is the dustbin of Beats Audio with what they sent this thing.  He gave me problems before. I fiddled with the Beats Audio settings for a bit and couldn't find a lot of luck. The strange thing is, I searched Beats Audio driver updates, and I came to the top completely empty. All links to them were either broken, be directed to the page of HP support containing the drivers for the specific device model questioned. The driver for my laptop page shows nothing about the drivers of beats. And my device manager doesn't seem to show that no driver present Beats, either, even though I SWEAR there drivers for them in the past. The only present audio device is the Realtek HD Audio driver. The Beats Audio utility in the taskbar does not seem to think there is something wrong, however, so I don't know what's the case. Can someone help me?

  (I know of no reason that the question I sent my laptop in for repair would be linked to this, nor do I have any reason to believe that the person who repaired the laptop could have done anything, as all my files on my HDD seem to have been completely intact, but just for the sake of rigour : A couple of weeks, apparently caused by me accidentally stick a 3.5 mm headphone jack into the adjacent USB and damaged brick my laptop. The computer, stop immediately, if she was able to start right back up. The next morning, it was completely insensitive and would not start until it was. I knew with certainty that it is the USB at the time, I thought that it was unlikely that a damaged USB port might cause a full brick computer, but when I got back from repair, the repair summary said that the only thing to do for she was replacing a USB port.  Other than the good question, my computer was working perfectly since.)

  Hello
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15 t-k100 Notebook and problems with sound not working not properly. You can try-

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on the speakers.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window. Reboot the laptop and test the sound.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link to a Microsoft fix for Windows 10, that might help.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• ENVY 4500: Lack of scanning for HP ENVY 4500 software after reinstalling the laptop

  Dear support,

  I got a HP ENVY 4500, installed on a laptop with Windows 8.1 and the HP Software scanner worked fine.

  I have recently reinstalled the same laptop but with Windows 10 Pro: the printer works fine but the scanner software HP is not available! I can't use all the features of the printer this way...

  My question is: why the HP scanning software is not available for Windows 10 Pro? I used the original CD.

  Where can I download the (new) 10 Pro software for Windows?

  Please help me solve this problem.

  Kind regards

  Carmine

  Hi all

  now, I have solved my problem: I install the Windows 10 soft "HP Scan and capture" from the Microsoft Store and it works very well with HP ENVY 4500 printer / scanner!

  Concerning

  Carmine