HP Envy 17-2110en: could not find a recovery media? No Solution don't Please HELP!

Similar Questions

• Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  I'm glad you found the solution in one of my suggestions, Jon. Please mark this question as answered. Thank you!

• After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  Prasanna Kumar Mishra

  Hi Prasanna Kumar Mishra,

  You did it happen any changes made to the computer before the show?

  You can try the steps from the following links and see if that helps:

  Troubleshoot failures to find the new LifeCam hardware
  http://support.Microsoft.com/kb/929087

  The problems of compatibility between LifeCam and other programs
  http://support.Microsoft.com/kb/953692

• I can not find my full product name... PLEASE HELP

  Recently I bought Hp pavilion G4, but I don't know what is the name of the full product of my laptop... actuallyy dow, I had to load certain drivers and on Web sites, it has computers dozenz laptop g4 and I do not know who is mine. There is no label on my laptop which is y I have this problem and the sticker under the battery is not clearly visible.

  I went through all the posts regarding the name of the product on the website of hp and also downloaded the hp support Assistant, but it only shows product number and the serial number and in the name of the product, he says just laptop HP Pavilion G4

  Please help me find my full product name

  My prduct number is A9R25PA #AB2 and serial number is LIEU999999

  Hello

  The NR will keep you refers to this model.

  Kind regards

  DP - K

• HP ENVY 17-J020US: could not find the drivers for my HP ENVY 17-J020US Quad Edition

  Hello

  I have a HP ENVY 17-J020US Quad Edition and I'm looking for "Intel HD Graphics Driver". The Support page and House HP driver heading the wrong driver and HP support was no help. The graphics card is an Intel HD Graphics 4600. Operating system is Windows 10-64 bit updated since Windows 8.1. Any help would be greatly appreciated... Thank you

  I rolled back to Windows 8.1. It's not worth the hassle, but thank you for your suggestions. My main problem was, I couldn't open RAW files in Photoshop using the GPU. This occurred after the upgrade to Windows 10 so I decided to go back because all the drivers that you mentioned, I already had on my system. Thanks again for all your help and Merry Christmas.,.

• Could not find the recovery disc for my laptop

  I'm buying for my Presario CQ50-209WM laptop recovery disks.  When I go to the software/driver download page and click on the Vista recovery disc, it is not available.  How to get the recovery disc for this laptop.

  Thanks for any help.

  Peg

  These links are dead to 99% of the numerous times, reported, several times.

  Contact HP you Chat, email and phone options here. Personally I had good results with the cat.

• Could not find LM238 regulator of tension in Multisim

  I am new to Multisim.  I can't find a LM238 voltage regulator in the library under sources power supply voltage regulators.  In fact, I did a general search and could not find anywhere.  What is usually done in a case like this?  My intuition tells me that I wouldn't need to redraw my circuit just because I can't find a component in Multisim.

  Thanks in advance.

  Hello

  We don't have a model for the LM238, but we have a model for the LM138. According to this data sheet, the LM138, the LM238 and the LM338 are identical with the exception of the beaches of operating temperatures. You can place a component LM138 to the master database and use it for the simulationand implementation.

  Hope that helps.

• Premiere Pro CS6 could not find capable video game modules.

  Hello everyone. I just bought the Production Premium CS6 and when I try to start the first I get this error message: "Adobe Premiere Pro could not find capable video game modules. "Your video please put updated display drivers and try again." This message comes after she tries to load the file importerquicktime. I tried to uninstall the software and reinstall anything will do. In fact, now I get also three other error boxes that all say: ' LoadLibrary failed with error 126: the specified module could not be found. " I did an extensive search online over the past two days to try to solve my problem myself... but nothing, I tried worked. I even read through all the threads already posted on these forums. Does anyone have any suggestions? Before posting, here are the things I've already tried as well as some technical:

  HP Pavilion dv7 Notebook PC

  Windows 7 (64-bit)

  8 GB RAM

  Intel Core i7-2630QM CPU @ 2.00GHz

  F.13 BIOS (25/04/2011)

  AMD Radeon HD 6700 M Series (driver version: 8.980.0.0)

  Mobile Intel HD Graphics (driver version: 8.830.6.2000)

  • I tried to uninstall the software.
  • I tried to update my drivers for both of the graphics cards (even if one of them do not have an update, it seems)
  • I run the software as an administrator.
  • I tried to go to the display settings and disable the Intel card. (this because low resolution that is unexceptable)
  • I went to the Catalyst Control Center and put the first to 'High Power' which is supposed to use the AMD card.
  • I open the BIOS, but there is no option to change anything graphical associates. (many people have to tell people to change switchable graphics set here, but I don't have any option)
  • I took my battery.
  • I uninstalled quicktime and reinstalled the latest version.
  • I downloaded and installed the latest version of first (as it was released the day before, I bought)

  I tried other things I think, but at this point, I have tried so many things, that I'm starting to forget. Nothing seems to work for me... I am wanting to use the first to edit this short video I want to release Wednesday, but this puts me behind. Any help is appreciated, thanks!

  BEST METHOD!

  I spent more than 24 hours to find a way to solve this problem. And that's...
  1. right click on desktop, and select switchable graphics properties.
  2. click on the Browse button and go to the folder of installation of Adobe premiere cs6
  3. Select cs6.exe first icon and click Open.
  4. set manually to high performance and click on apply.
  5. repeat the above instructions, once more and instead select premierecs6.exe, select GPUsniffer.exe, and click on open again.
  6 and set it to high performance and click on apply.
  7 enjoy CS6

• I could not find drivers for windows 8

  I have a hp pavilion dv6-1133et laptop. I could not find drivers for windows 8. What should I do.what do you offer me?

  The first thing to do is use Windows snipping tool in Windows 7 to capture devices that make up your laptop. This way you won't have through the hassle of hardware for each device ID when Windows 8 is installed.

  I did it for my current loan of the HP Envy spectrum product 13D-3000 CTO Touchsmart Ultrabook in the two images below.

  

  Once you have done this, you know what is installed. You also know looking at the picture, sites of manufacturer in which you must visit to try to find the drivers of Windows 8 for devices. You can also post the pictures here, so we can help you find the drivers.

  You also have to share what chipset and CPU is in your laptop. You install as well with us, share the Windows 8 version (32 or 64 bit).

• Help! During the new installation of windows 8 from windows 7, received the error message "could not find readers.

  First post: I have a hp Envy 4-1030us ultrabook comes with windows 7.  from 3 months (after about 1 year of use), he started having the BSOD (blue screen of death) to STOP the messages of error 0x0000007e constantly interrupting sessions.  factory reset which has worked for 2 months but started to do it again.  tried the factory reset again, but now he makes mistakes BSOD after 2-10 minutes of use.  I was so fed up that I had a new OEM DVD of windows 8 and try to start it from the external DVD player connected via USB (laptop doesn't have a DVD player in itself).  When I get to the custom installation, without partitions or drives are listed and the error message 'we could not find all the readers'.  Since it is an ultrabook there is a 32 GB SSD and a 500 GB HARD drive.  in windows 7, these discs are seen without problem.  What I am doing wrong?  Why install it windows 8 can't see the internal drives?  Thanks in advance for any help you can give.

  Hello

  See the links below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-install-unable-to-find-my-SSD-hard-drive/e54ff7bc-50a9-4e05-85cd-542ca71f621d

  http://www.eightforums.com/tutorials/9573-SATA-driver-load-Windows-8-Setup.html

• Could not find the time stamp option in the historic window

  Could not find the option "date of visit" in the historic window as described in "ehow" for Firefox

  This is the most recent column visit.

  Have you looked in the menu ' views > show columns "in the library?

• Could not find ' subject: accidents using the address bar

  My question is with Firefox (35.0.1) constantly crashing, I try to find my submitted incident reports but could not find ' subject: accidents using the address as directed by Mozilla bar. I type "subject: accidents and end up with 'the address is not valid'." My browser crashed between 25 to 30 times in the last 6 days, I presented reports every time and 6 times, I also introduced my address to receive a response, none was forthcoming.
  Home PC is used by a few of us, while the children use their own laptop computer, to save time logging in and out, each of us using another browser. Nobody in our family has problems with IE or Chrome on the PC at home, nor children. The only person to have problems is the poor SAP who drew the short straw - me.

  I can a fair bit of advice? During my research, these constant crashes, I see that many, many others have had the same problem and for quite a few years apparently. Should I just accept that this is part of the use of Firefox and don't forget to take some Valium drops in my tea before logon? or perhaps the healthier choice, find a.n.other browser and move everything out there?
  I wonder Auto Add info and willingness, but understand that I do not use the Firefox browser to do this now because he planted just - seriously.

  Hello type about: crashes without an empty space (on: crashes)

  Thank you

• >: everyone is having the same problem with all the days that I have now with the update on thursda after update, it could not be started "could not find xpcom" restored Dáil

  with the update of daily Thursday (Australia) after update owned couldn't boot received message "could not find xpcom.
  I then restored by day sauvegardΘ installed upgrading again every day would not restart with the same message
  I tried again on Saturday you have the same problem
  I'm now ignoring the update message that is very annoying because he wants me to update daily

  The bug in question should be solved with a daily update of today. However, I agree with the recommendation to go with 31.0 once it comes out next Tuesday, or at least to use the beta versions (once per cycle) as a compromise between stability and get the latest features and updates to the platform.

• Could not find full download for RC build (30.0 RC2). Update fails. Beta channel has my current build (30.0b9).

  Could not find full download for RC build (30.0 RC2). Update fails. Beta channel has my current build (30.0b9). Channel has version 29.

  Update always fails on this work a bit locked machine.

  The Release Candidate of 30.0 build2 is located in http://ftp.mozilla.org/pub/mozilla.org/firefox/candidates/30.0-candidates/

  The 30.0 Firefox will be released June 10 if all goes well.

• A friend added to the discussion group, but could not find the cat on his Skype

  Hey my friend had some difficulty in finding a focus group that it has been added to. It has certainly been added, and we tried a lot. We have updated the Skype. Re-uploaded and more. Nothing worked, the cat is nowhere to be found. I've been in this chat and it had approximately 20 members and I could see his name in the members box, but he could not find his Skype chat.

  NVM,

  Benopro wrote:
  

  Hey my friend had some difficulty in finding a focus group that it has been added to. It has certainly been added, and we tried a lot. We have updated the Skype. Re-uploaded and more. Nothing worked, the cat is nowhere to be found. I've been in this chat and it had approximately 20 members and I could see his name in the members box, but he could not find his Skype chat.

  NVM, it fixed