HP Envy 17-j185nr Touchsmart: hp envy laptop external monitors
I want to know can I connect 2 external monitors and have both running with the laptop screen, so that I would have 3 screens going at the same time?
I have only 1 HDMI port.
Did some research and found there is something called a USB to HDMI, but do not know if I buy it if it still allow me to run the two external monitors at the same time.
Hello and thanks for the display on the HP support forums. The answer to your question is no. Not that your system is configured. There is a special material using a type USB adapter that will allow you to do, but it's expensive.
It is not something that HP supports but here is a link to a page that will give you some information.
How to connect multiple monitors to your laptop
If your system has a chipset AMD then this may work as well.
HP Notebook PC - connect more than two monitors with AMD Eyefinity technology
I hope this helps.
Thanks again for posting and have a great day.
Tags: Notebooks
Similar Questions
-
HP ENVY laptop - 13-d022tu: laptop lags when it is plugged
Laptop works fine when on battery, but when I plug it, the laptop of begins to lag, and my games have a constant 20-24 FPS. I have also noticed that when the laptop is connected to 80% or higher it don't hang out, however, when I plug it to 20% or more, the laptop everything is lagging.
Hi there @malktee,
Welcome to the Forums of HP Support! I understand that your laptop rowed when connected to the charger, and that you have noticed that this never happens when the load level exceeds 80%. I'm happy to help you with this.
From your description, this fix seems custom-made for you: HP ENVY laptop - the computer is slow or does not respond while that connected to the charger. As you can see that he mentions about the same problem but the break is 60% or less. Try it and tell me if that solves the problem.
If it doesn't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.
-
HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP
I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!
Hello @MAlex_B,
Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!
I understand that you have a problem with the display and wanted to help you! I see only after an update, the external monitor no longer works.
Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state? If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly? You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca
Please post back with the results. Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great day!
-
HP ENVY laptop - 15 - ae101no: control of the Volume on the keyboard keys do not work!
Hello
Volume control keys had suddenly stopped working, and I have no idea why. I have the model HP ENVY laptop - 15-ae101no (ENERGY STAR). Could you please help me fix it? Thank you!
Hello
Try the following.
Download Realtek HD Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74867.exe
When finished, press and hold the Windows key and press R
In the run window, type devmgmt.msc and press to enter.
In Device Manager, expand sound, video and game controllers. Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver at the following link.
http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72105.exe
When the reinstallation of Chipset is finished, stop the laptop.
Disconnect the power adapter and then hold button power supply for 30 seconds, then release.
Plug the power adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation. Once this done, reboot the laptop and let windows load completely for a few minutes before checking.
Kind regards
DP - K
-
I had been without my HP Envy laptop a few weeks after he bricked on me and I had to send in for repair, and when I came back the sound quality seems to be noticeably worse than what I remember. The sound in general seems a little intestine initially, and it does not handle certain tones fine treble, producing shrill notes that almost seem like they're clipping or something, as if it's too much for the speaker to manage. The volume level refers to it - it's much worse at higher volumes, but its volumes, it should be able to manage, and has dealt in the past. 30 is basically normal, I'll hear parts of it start happening about 40 volume or so, 60 sounds evil, and 80 is almost inaudible.
My first suspect is the dustbin of Beats Audio with what they sent this thing. He gave me problems before. I fiddled with the Beats Audio settings for a bit and couldn't find a lot of luck. The strange thing is, I searched Beats Audio driver updates, and I came to the top completely empty. All links to them were either broken, be directed to the page of HP support containing the drivers for the specific device model questioned. The driver for my laptop page shows nothing about the drivers of beats. And my device manager doesn't seem to show that no driver present Beats, either, even though I SWEAR there drivers for them in the past. The only present audio device is the Realtek HD Audio driver. The Beats Audio utility in the taskbar does not seem to think there is something wrong, however, so I don't know what's the case. Can someone help me?
(I know of no reason that the question I sent my laptop in for repair would be linked to this, nor do I have any reason to believe that the person who repaired the laptop could have done anything, as all my files on my HDD seem to have been completely intact, but just for the sake of rigour : A couple of weeks, apparently caused by me accidentally stick a 3.5 mm headphone jack into the adjacent USB and damaged brick my laptop. The computer, stop immediately, if she was able to start right back up. The next morning, it was completely insensitive and would not start until it was. I knew with certainty that it is the USB at the time, I thought that it was unlikely that a damaged USB port might cause a full brick computer, but when I got back from repair, the repair summary said that the only thing to do for she was replacing a USB port. Other than the good question, my computer was working perfectly since.)
Hello
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15 t-k100 Notebook and problems with sound not working not properly. You can try-1. right click the speaker icon in the lower right corner of your time.
2. click on playback devices.
3. click on the speakers.
4. click on properties.
5. click on the Advanced tab in the Properties window.
6. change the default menu Format in the highest quality.
7. apply properties.
8. click OK to close the Properties window. Reboot the laptop and test the sound.You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows. Please restart the laptop twice to make sure that all updates are completed!
Here is a link to a Microsoft fix for Windows 10, that might help.
Please let me know how it goes.
You can say thanks for trying to help by clicking on the Thumbs Up below! .
Thank you. -
HP Envy laptop - 15-ae011na
I have this laptop for only 1 week, he did various updates. I guess that's from Windows 8 to 8.1. He also completed an update of the BIOS with HP Support Assistant.
Question: When the awakening of my laptop mode 'sleep', my trackpad and keyboard do not work, I have unlock my PC using HP Simple pass, then press the power button to restart the machine.
Troubleshooting: I followed some advice for troubleshooting on the support page which lead me to uninstall the keyboard driver then restart my machine. I have all the latest drivers aswell.
Someone has an idea what might be causing the problem? Ideally, I'd like to do a restore or upgrade of Windows 10 immediately.
Thank you.
Looks like this has been caused some my driver problem with Windows 8.1 and I guess that's with HP SimplePass such that it would not recognize the keyboard and the trackpad after waking up to use it.
I have upgraded to Windows 10 that looks like a solved the problem.
-
HP ENVY notebook: Headphones not detected on HP ENVY laptop
Headset/headphones not detected by the laptop when it is inserted into the audio jack.
tried several headphones which none were detected despite working on other devices.
USB headset is detected.
Have updated audio drivers using HP support Assistant and manually and not always no chance.
Had this problem because the laptop has arrived.
Any help much appreciated and I will try to provide all other necessary details.
Hey @ABONKERSCHICKEN,
Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!I understand that you are having problems with headphones not detected on HP Envy laptop. I'd be happy to help you with that.
To begin, I would like to follow this document: computers HP - solve the headphones and headset problems
Please hold me.
By pressing the Thumbs Up button below, you can always say thank you!
See you soon. -
HP ENVY laptop - 15-k277ca: upgrade memory RAM - HP ENVY 15 Notebook
Hi all!
Last weekend, I upgraded the RAM in my laptop HP ENVY laptop - 15-k277ca.
The machine has 1 module of 8 GB by factory, so I bought another module of 8 GB (same brand and same rate).
But the problem is that the machine does not recognize this second module, neither in the BIOS nor so
I am running Windows company 10 x 64.
The weird part is that I downloaded the CPU-Z, and this software recognizes the two modules.
Any idea?
Here is the image of the CPU - Z software (where memories are recognized)
See tensions? You've mixed low-voltage and voltage regular memory. They can be the same machine and the speed, but they are not the same tension. This will cause problems as you see. The computer is designed to work the DDR3L memory (1.35 volts). When you correspond to the modules, you really need to match modules. Can you confirm part numbers printed on both modules and the specifications on the labels?
-
Hello! Please please help me troubleshoot my Hp envy laptop. I have an imenusing hard since I bought it 4 months ago.
1 wifi turns off and it takes time to turn on. Only the airplane mode will appear in the network connection.
2. the battery will easily to consume even if only I always shut it properly.
3. There is an instance of the function of touch pad didn't work (zoom in and zoom out)
I hope for your immediate response to the above issues. Thank you.Hi tardis, regarding the upgrade. The problem is that I can't by the Recovery Manager window that says "inconplete restoration", I tried Jo turned it off the laptop, but it still run recovery and it will always end up with the same window. Meaning, I can't go through my main desktop to search and open for windows update. Is there another way? I'm stuck with this box of the Recovery Manager window.
-
Hello...
my system is HP ENVY laptop PC (B8F41EA #ABV) 4
System was with win7. But due recovery does not, I installed from USB. Last four days, I tried to install win7 64 bit Ultimate. It is at the time of instalation complest (after copying windows files, extension of windows files, features installation and update) indicating an error. " Windows Setup could not configure windows to run the hardware on this computer."
so, how can I solve this problem... pls help me.
Thanks in advance...
Hello:
I can't find the model number or the plug on your laptop by entering the product ID you have posted.
If your laptop has an Intel processor and chipset, restart the installation and follow the steps below and see if it works...
Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).
Extract the files on a usb flash drive.
With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.
After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.
You should now see the storage driver files listed.
If you check the box, it only includes the compatible driver.
Follow the prompts and should install W7.
-
Wake on Lan for HP Envy laptop m4
I have a HP ENVY laptop m4 running Windows 8.1 (64-bit). The laptop has a Ralink RT5390R 802.11bgn Wi - Fi adapter. I can't get to respond to any package of Wake-On-Lan. The computer is connected wireless to 90% of the time. At this point, I have not tried a sequence of waking with the wired connection, so I can't tell if it's successful.
My question is: is-possible WOL with the Ralink card? And, if so, how you configure it?
Thanks in advance
The first thing you need to know is that it doesn't seem to be a WOL enable\disable option in the BIOS of your laptop want m4. That does not make a non-viable option using WOL.
You should read the following article on the How to Geek on WOL.
http://www.howtogeek.com/70374/how-to-geek-explains-what-is-wake-on-LAN-and-how-do-i-enable-it/
-
The m7 HP Envy laptop: docking station connector
I bought the computer laptop hp envy m7. It is not compatible with the connector for my docking station, HP xb3000 notebook expansion base. Is there an adapter for the expansion base to the portable Envy? Is there a docking station for the HP Envy laptop?
Thank you
Bryan
Hello
The m7 envy laptop does not therefore docking port, you will need to use USB docking port. There are many ports of USB docking around such as:
http://www.Amazon.com/HP-Replicator-docking-H1L08AA-ABA/DP/B008KMDVME
(HP store says there are 11 products but the site is inaccessible, you can wat to get a complete list
http://store.HP.com/us/en/MDP/accessories
Kind regards.
-
HP ENVY laptop - 17-r107na: Lexar CFR1 continuously, disconnect and reconnect
Hello
I connect a CompactFlash Lexar KFR1 card reader to the USB 3.0 port on the right side of a HP ENVY laptop - 17-r107na.
This card reader is very connection / disconnection of the laptop, what happens every 5 to 10 seconds.
I tried all the USB ports on the laptop and the card reader has the same way.
I know that the card reader works fine on another PC.
I know another USB 3.0 device, a WD My Passport Ultra works great on the laptop and I can copy files to and from it.
Please help me solve this problem, I really need to do this I need to transfer files from my digital SLR.
Concerning
Neil.
OK, I am even more confused
I have now:
1 desktop computer
1 HP Envy laptop
1 card SAndisk Extreme III CF
Lexar Professional CF card 1
1 card reader Lexar Workflow KFR1
1 drive of transcend CF cards
If I plug the Lexar CF in the Lexar card reader and plug the card reader into the HP Envy laptop, then I encounter the problem in this thread.
If I change one of the three IE Sandisk in the Lexar memory card reader in laptop HP then it works very well!
Like you, I don't know how to solve this problem, but I have a work around. Unless you have an idea of spark I suggest we close this thread.
-
Hello
8.1 Windows, I've just updated my HP Envy laptop to Windows 10. I now have a Windows 10 product key (that I found using the Microsoft tool productkey. The update went well. All the drivers have worked. The question isn't here.
I have to do a clean reinstall of the laptop. Too much shit...
I know how Windows 10, but I don't know how I'll be able to reinstall the app pre-loaded, he came with the laptop.
Firstly, Windows 10 kind of RecoveryMgr blocked... I just can't access more...
If I boot with the drive D or the backup media, I created, I'm only given the opportunity to reinstall completely (but, of course, for Windows 8).
Two questions:
1. from the D drive or my backup media, is there a way to separately select application to install? (Everything seems compressed and it allows me to start the installation of each software program.
2-if I reinstall Windows 8 using backup media, I created (or d reader app), I'll have my own installation... but I'll be able to re-update to Windows 10? (remember, I now have a product key...).
Thank you.
Sébastien
Your best option would be to use the recovery media to reinstall the original OS. Since you have an activation key of license for the original operating system meets the requirement to update Windows 10.
Once you have done this, you can use the key to creation of Windows Media to create a bootable installation flash drive or to proceed directly to Windows 10.
Windows 10 installation as an upgrade has the advantage of you to have the applications installed at the origin of the original OS present and ready to use in your new installation of Windows 10.
Otherwise with a clean install of Windows 10, the HP Recovery Manager wil do not exist, or you can install it separately.
-
I bought this laptop HP because he announced as being fully compatible with Windows 10. Unfortunately, this is not the case.
WiFi constantly decreases (which doesn't happen on my Macbook and didn't happen when I was using Windows 8.1 on this same laptop). Unfortunately, HP haven't released a disc of 10 32/64-bit Windows for HP ENVY laptop wireless - 15-k201na.
Anyone know when there will be a released wireless driver?
Please do not install drivers windows 7
Install drivers Windows 10
https://Downloadcenter.Intel.com/download/25279/Intel-PROSet-Wireless-software-for-Windows-10
Don't forget the new driver of RST
https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver
Maybe you are looking for
-
Mac pro 1.1 random reboot several times in a row
Hi all, the random reboot started to happen about a month before, it wasn't something like this before. The problem generally (not all the time) appears the first time of the day that I start the mac and usually several times in a row when this happe
-
Laptop HP 15-f033wm: 15-f033wm charger
Hello! Due to a series of unfortunate events, I'm rather need a charger for my computer! Is this a suitable place to get advice on where to buy a new? I don't know if I could find one in my area easily and online, purchase of a charger is... dauntin
-
Please, can you help me. I am trying to transfer my music from my file to my USB stick but he always error apears writes that no longer located in c:\users\... Check the location of the item and try again. At the top of it, my usb device does not w
-
Activate "show window previews".
Recently, I restart my laptop and re install win 7 home Basic, after that i cant seen in previw widows task bar and start and taskbar properties having not box with 'show window previews. what I can do.
-
Hi allI prepare my self to give the VPC510, I read the official book, blogs and online documentation. But there is always a goal that I can not find an answer for. Maybe its me that I don't know. Can someone help me:Identify available vCenter Server