HP Envy TS m7 Ntbk E0K99UA #ABL: HP Envy laptop Windows 10, clean install and reinstall applications preinstalled

Similar Questions

• HP ENVY 6-1030ec: Win7 clean instalation

  Hello.

  I have HP ENVY 6-1030ec with a 500GB HDD and SSD standard as an additional cache 32 GB. I wanted to clean install Win 7 on it, but was unable to do so.

  First of all, I couldn't readers to the place where I have to choose on what Windows installation disc. I then completely formatted the disk HARD 500 GB, and stupidly enough even the recovery partitions. It did not help.

  I did some google search and found http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Clean-install-Win-7-hybrid-hdd/t.... I downloaded the drivers, but it didn't work. First of all, it depends in what USB slot is my bootable USB key. A location, I don't see another USB with the drivers on this subject. If I pass the USBs and start installing, it ignores the part where I can choose the drive to install Win 7 in and goes straight to the part where I should load the drivers. In this case, I am able to see the other USB key, find some drivers on it, but having tried to install those, he's said something on this subject there are no new features.

  Then I tried to install Win 7 on the hard disk on another computer. It worked fine and I used Sysprep - EHC and hope that this will solve the problem. I did and it has not solved the problem. After a few questions, I am in the State Win 7 install, reboots and before the part where I chose the username, etc. I get the error "installing Windows could not configure Windows on hardware on this computer." I googled a https://support.microsoft.com/en-us/kb/2466753 solution, but it did not work. First, I tried the drivers (again), and then I turned off RAID. Now, when installing Win 7, I see not only on the HARD drive, but also on the SSD. However, I still get the same error.

  I googled some more and found http://www.tomshardware.co.uk/forum/61328-63-widows-setup-configure-windows-computer-hardware. I tried the msoobe part a, but when I run it, it says the program is not compatible with the current version of Windows and that I should check for x 64 or x 86 system.

  I also tried to install Win on another HARD drive. This time I still, even had to choose the user name in Windows, set time zone, put in the product key, but then I get the error "failed to initialize the connection process. Interactive Logon Process initialization has failed. Please see the the event log for more details". I tried Googling, but is a few tips for when this occurs after Windows worked normally.

  I did Setup Win 7 as many times, but it never occurred to me. I'm really confused right now and you'd be grateful for any help.

  Best

  FF

  Hello.

  Thanks for the reply.

  I tried the tests at some point earlier, all passed without problem. The other link you suggest the links just to this question.

  Anyway, I solved it by installing Windows 10 directly.

  FF

• HP Envy 5660: Best way to uninstall and reinstall HP Envy 5660 software?

  After the upgrade to Windows 10 there are some minor problems.  Messages suggest I uninstall the printer software and install the latest version of the driver.   What is the best way to do it?  HP print and Scan doctor gives me the option "uninstall and reinstall with the latest version of the software.  Will it do all that?  When should I remove the printer from devices and printers?

  Thank you-

  L

  Hi, you can uninstall and reinstall the drivers using hp print & scan doctor. Also you can go to control panel-> programs-> basic software find want 5660 and uninstall the same. Once uninstalled, you can donload drivers printer from the following location and you can even install.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-5660-e-all-in-one-printer-series/6809225/model/6809226#Z7_3054ICK0K8UDA0AQC11TA930C7

  Pls lemme know the status.

• ENVY 15-AH151sa: how to uninstall and reinstall my Synaptics TouchPad of SMBus driver?

  When you try to solve a problem on my new PC BSOD * [towards the end of the installation of Office365], I had to fix this serigraph in my thread in the Microsoft Community:

  

  He was not related to my problem, but the moderator noted that

  "In the first snip accidents are related to your pavement.  By removing completely and then reinstall this driver should help. »

  How to do this please - assuming you agree, of course.

  Alyssa in your Live Chat team was brilliant - how can I give feedback?

  New Envy 15-AH151sa
  More old Compaq Presario CQ71-320SA screwed up by free upgrade from Microsoft of Win7 for Win10

  Download and save the last driver Synaptics your Support page. Then go to control panel, programs and features and uninstall the laptop Synaptics.Restart and double-click on the downloaded file to install it.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-AH100-notebook-PC/8499284/model/8942971#Z7_3054ICK0K8UDA0AQC11TA930O2

• Am I able to re - install vista after doing a windows 7 clean install?

  So, I bought a laptop that has Vista and bought and did a clean install of 7.

  I am building a new computer and would like to spend 7 laptop to new construction and re - install Vista on the laptop. I have everything I need at the end of 7, but all I have is the CD - Key for Vista. There is another laptop in the House running the same version of Vista (32-bit family Basic) I had initially.

  Is there a way I can create a Vista installation disc using another laptop or anything? We are even allowed to transfer Windows between computers as I want to do?

  Thanks for any help and advice.

  No letters, just a long series of numbers.

  I am running 64 bit 7 Professional if that helps at all.

  Looks like you have the Windows 7 retail license... It's big and what makes it legitimate to remove you Windows 7 off the coast of this laptop and move it toward your new system you have stated your desire was.
   
  Back up all your data.  Can use Windows Easy Transfer and an external hard drive to make sure that you have your personal settings and files the currently Windows 7 system.
   
  Download and create an installation of Windows Vista bootable DVD.  You can get help (and links to legitimate downloads) here:
  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links#
   
  You are basically these three files (for the DVD itself):
  X 14 - 63452.exe
  Boot.wim
  install.wim
   
  You can follow the directions under the heading 'create your own Vista ISO bootable image' on the link of the web start page to create an ISO image and then burn that image on a DVD.
     
  I suggest to perform a new installation using the DVD and product key you have on the sticker on the laptop that you remove Windows 7 from (for Windows Vista).  This will remove Windows 7 system (naturally).  You will need drivers for the laptop too - but that should be no problem accessing the web page of the manufacturer of the laptop.
   
  Then, you can use the product key and Windows 7 media to install Windows 7 on the new system.  Install all your software, patch, obtain the correct drivers from the manufacturer and restore your data.

• I have windows vista I'll be able to upgrade to windows 10?

  * O.T. > upgrade Windows 10

  I have windows vista I'll be able to upgrade to windows 10?  If so, how?  I go to the website to get the free download, but it brings back me to the page 'help '.

  Hello

  Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

  There is no free upgrade Vista to 7, 8.1, or 10.

  Follow these steps before you buy Windows 7.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buy you and upgrade (new installation) of Windows 8.1.

  Microsoft sells more than 8/8.1.

  Try Amazon.com, etc.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• Windows XP is installed on C: / and Windows Vista on E:. Is it safe to delete the partition of Windows XP? I'll still be able to boot Windows Vista?

  I have a 500 GB sata HDD and it is partitioned into 4 volume (C: E: - 97 GB, d - 122 GB, GB-122, F: - 123 Go). my windows xp is installed in the C drive
  and I recently install windows vista on the E drive.

  is - it safe format the c drive where windows xp is installed?

  If I format it will damage my system?

  original title: Dual Boot Format

  Hello

  It is not safe to remove Windows XP from drive C. If an earlier version of the Windows operating system is installed in a dual-boot with Windows Vista or Windows 7 configuration, the Windows Boot Manager program transfers control to the Ntldr program for the earlier version of the Windows operating system.

  If you remove Windows XP, you may not be able to start Windows Vista as well.

  Refer to: http://support.microsoft.com/kb/919529

  The ideal way is to reinstall Windows Vista.

  Note: Be sure to back up data before formatting the hard disk.

  See: http://windows.microsoft.com/en-US/windows-vista/Installing-and-reinstalling-Windows-Vista

• ENVY TouchSmart 15 t-j100 - install again SSD

  In the past, I have improved the internal system disks several times, and eventually I hope to upgrade to an SSD on the HP ENVY 15 t-j100 TouchSmart Envy (I've seen a 15 "EVNY with a SSD option).

  I don't really like on a recovery partition, I prefer a clean install of Windows 8 standard.

  The support provided with computers laptops HP there all the installation programs that are necessary to perform this operation manually, without using the HP recovery app? In other words, Windows, drivers and any software supports the TouchSmart feature so that I can install them manually?

  If not, can we do the HP recovery for a smaller than the original HARD drive SSD? I see mixed messages in the forums.

  Thanks, Jeff

  banhien,

  I read the documentation PDF and HP asks us to create a recovery disk. I wasn't sure if this programs installation contained I could manually use to install on a clean install Windows 8. It seems that it's not possible. Thank you.

  Paul,

  Okay, it seems therefore that HP is only what is actually a factory of the OS and software reset, and you confirm that the SSD must be equal or superior to the original size. This is similar to what I've read elsewhere on the forums. I don't think I can afford a SSD that big, so it seems I have to do a clean install and download the necessary software.

  I realize why companies it like HP, it's because it's a headache to support otherwise. However, I wish they would provide only Windows 8 and other installation programs for the sake of the DIY crowd:-some of us are comfortable, installation systems and do not expect HP support to bail out us if spoil thanks.

  And thanks for the links.

  -Jeff

• HP Envy 17 E0K99UA #ABL Second hard drive

  Hi, where can I find the corect caddy and sata cable to install a second hard drive in my HP Envy 17 E0K99UA #ABL, what is the part number?  Thank you!

  M7-j078ca model...

  The part addressing a very reliable seller online here:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

  It is the part of HP:

  Hard disk hardware kit 720237-001

  And here it is in stock directly from HP:

  http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=F622AF5C53804151A243048938E7F69A&SearchIn=PartNumber&SearchPN=720237-001

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I use Envy 17 with a job posting and I need to be able to turn it on even if the lid is closed? Thnx

  Hey! Regarding my HP Envy 17 1085 eo. I use my Envy 17 with an external display, and I have to be able to turn on my pc, while the cover is closed (clamshell). It is possible while the pc is in "standby", while activating the mouse keyboard og - but Windows break mode standby after a certain time, leaving me frustrated as I then need to open the lid of my desire and press the button 'walk', to use the Windows. Is it possible somehow? Thank you very much!

  Hey dhalb_,

  Have you ever watched the Power Options window (start > type 'power' > click Power Options) where you can change when the computer sleeps (left)? As long as you stop the computer periodically (2 - 3 times a week, if you use it every day) it would be nice to never go in "standby mode" while it is plugged.

  For a while, I used a laptop as a desktop replacement with an external monitor and ran into the same frustration as yourself. I shut down my computer after each use if so I came up with a scheme where I could leave the screen all half open, just enough to be able to press the power button.

  If you prefer to go in standby mode, you can go to the advanced power settings (Power Options > change Plan settings next to the selected power management > change advanced power settings), extend your sleep and set "Hibernate after" connected to never by typing 'Never' in the field minutes. Click on apply and OK.

  I should mention that it does not extend the life of your computer to run constantly. Hard drive failure and the motherboard issues sees much more often on machines that are constantly running. Computers bogged down and run slowly when the memory is full. Memory erase them and will reset when the computer is turned off. Here's a link explaining more on the accumulation of memory and aging of the material.

  I hope these suggestions help. Please let me know if you have any questions.

• HP Envy 15 t (G0T59AV): HP Envy laptop speaker poor sound quality (particularly acute) as the volume increases.

  I had been without my HP Envy laptop a few weeks after he bricked on me and I had to send in for repair, and when I came back the sound quality seems to be noticeably worse than what I remember. The sound in general seems a little intestine initially, and it does not handle certain tones fine treble, producing shrill notes that almost seem like they're clipping or something, as if it's too much for the speaker to manage. The volume level refers to it - it's much worse at higher volumes, but its volumes, it should be able to manage, and has dealt in the past. 30 is basically normal, I'll hear parts of it start happening about 40 volume or so, 60 sounds evil, and 80 is almost inaudible.

  My first suspect is the dustbin of Beats Audio with what they sent this thing.  He gave me problems before. I fiddled with the Beats Audio settings for a bit and couldn't find a lot of luck. The strange thing is, I searched Beats Audio driver updates, and I came to the top completely empty. All links to them were either broken, be directed to the page of HP support containing the drivers for the specific device model questioned. The driver for my laptop page shows nothing about the drivers of beats. And my device manager doesn't seem to show that no driver present Beats, either, even though I SWEAR there drivers for them in the past. The only present audio device is the Realtek HD Audio driver. The Beats Audio utility in the taskbar does not seem to think there is something wrong, however, so I don't know what's the case. Can someone help me?

  (I know of no reason that the question I sent my laptop in for repair would be linked to this, nor do I have any reason to believe that the person who repaired the laptop could have done anything, as all my files on my HDD seem to have been completely intact, but just for the sake of rigour : A couple of weeks, apparently caused by me accidentally stick a 3.5 mm headphone jack into the adjacent USB and damaged brick my laptop. The computer, stop immediately, if she was able to start right back up. The next morning, it was completely insensitive and would not start until it was. I knew with certainty that it is the USB at the time, I thought that it was unlikely that a damaged USB port might cause a full brick computer, but when I got back from repair, the repair summary said that the only thing to do for she was replacing a USB port.  Other than the good question, my computer was working perfectly since.)

  Hello
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15 t-k100 Notebook and problems with sound not working not properly. You can try-

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on the speakers.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window. Reboot the laptop and test the sound.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link to a Microsoft fix for Windows 10, that might help.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• Want 7640: HP Envy 7640 Windows 10 touble connection

  I want to 7640 jet ink printer connected wireless to my network.

  I have no problem printing and connecting with my macbook air & iphone 6.

  My windows laptop 10 However struggling to connect to the printer, and when he finally when you click on 'print' the program (e.g. MS Word) hangs (not responding) and I have to close the program without printing

  I updated the drivers of latesst on the laptop and run printing & scanning HP doctor and all green ticks, including being able to run the test print page of my computer windows laptop.

  Please can someone help me understand why printing problems occur - so frustrating

  Hey @alexbunt,

  Welcome to the Forums of HP Support!

  I see that you have problems when printing from your computer on Windows 10 to your wireless connected e HP ENVY 7640 printer all-in-one. I would like to help you to solve this problem today!

  Let's try the following steps:

  Step 1: Remove the driver:

  1. click on the Start button

  

  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

  3. click on programs and features to launch the window.

  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and find your HP Envy. If you see your HP Envy in the list, click it and choose Uninstall.

  5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

  6. then, click on the menu start of new

  7. this time type devices

  8 click on devices and printers to launch the window.

  

  9. in devices and printers are looking for your HP Envy. If you see if if please right click above and choose 'Remove' or 'Remove'.

  10. Once your HP Envy is no longer showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

  

  11. click on the drivers tab

  12. search for your driver HP Envy . If the list, please click it and choose delete

  13. Select delete the driver only

  14. Select OK

  15. click apply and then OK in the print server properties window.

  16. close devices and printers. Please proceed to the next step.

  Step 2: Remove temporary files:

  1. click on the Start menu

  2. type run. Click on Run to launch the run dialogue box.

  

  3. tap folder in the run box, and then click OK

  

  4. when the Temp folder, open select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.

  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.

  6. close the Temp folder when it is empty

  7. right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download and install the package to the full functionality of the software and the driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your printer

  Once installation completed test print.

  If these steps solved your problem, please click "I accept as a Solution." You can also click the "Kudos, Thumbs Up" on the right to say "thanks!"

  I would like to know how it goes!

• HP Envy 15 Windows 7 Professional clean install Driver questions

  This morning, I did a clean install of Windows 7 on my brand new envy 15 (LW897AV), which includes the deletion of backup partition as the partition driver HP.

  Unfortunately, many drivers not installed, and I can't find a way to find them. This includes Beats audio driver (I have the audio control panel, but it is not connected to the button on the side volume control) as well as the microphone and some drivers that appear in the devices Panel but the diagnosis is not able to find.

  

  Is there a way to fix this now, or should I cave and pay the $20 and get a recovery CD?

  Get it up to 3 Intel Chipset Installation Utility drivers missing... What the devil. I'll get the restore CD. Guess that's what I'm trying to be creative with my software. :/

• HP envy 17-1050ep: drivers to install windows 7

  Hello

  I'd be happy if someone is able to help me.

  The thing is that my envy 17 1050ep, pn wp002ea #ab9 works fine with original Win 7 home premium x 64 operating system, but as I need to add to a domain I m trying to install win 7 pro/business or ultimate x 64 but the hard drive is never detected when I try to install it.

  BIOS installed is the most recent of the hp Web site.

  Inside bios's do not present any possibility to change all sata driver it s very limited.

  Tried to download and install Intel® chipsets 5 and Intel® 3400 Series Chipset, doesn´t question of working persist.

  With the original installed OS Win 7 home premium installation sw access, file copy of drivers, tried to install the drivers, mainly the fast storage intel, problem persist undetected hard disk.

  Doesn´t disc tested have all work fine with original operating system error.

  Put to the test a new hard drive, the same question.

  Card chipset is intel hm 55.

  Drivers HP Support available on the work of Don t for the hp site.

  HP Support just say device is out of warranty and can´t support.

  Intel supports just say:

  Hello

  Thank you for your interest in Paul, but I ve has already solved the issue not by common sense, but in another way, not correct mash but the goal has been reached it works!

  I ve removed the hard drive, insert on a dv6-2190ep product number WK631EA with the Northbridge Chipset Intel PM55 (discrete models)
  and Southbridge: Intel ICH9M http://h10032.www1.hp.com/ctg/Manual/c01860375.pdf it here are the specifications of the device.

  Then do a fresh install of Windows 7 Ultimate 64 x on this hdd unit is recognized and doesn´t need to install a driver.

  After completing the clean install, hdd removed, insert it on Envy 17-1050ep and here... hard drive detected new device drivers installed automatically
  and everything works fine!

  Now the I ve just do updates of device and operating system.

  It s too bad that either technical supports Intel, HP, Microsoft, Don t know explain or say that drivers must be installed or what settings it should
  in order to install the editions of windows that allow to add the unit to a domain.

  Rather technical supports are trying to sell us things, how they want to sell if they don t know accompany customers when they need? Although I m out of warranty I ve never
  used technical support and I ve just do a simple question that no one can and know the answer and on a subject that must be broadcast on the drivers and support page!

  If the drivers and instructions are displayed clear and with the right i´ll drivers just to go and Don t bother nobody.

  So, if any customer need help to install the OS here is a workaround because technical supports Don t know the problems.

  If a need for help, it will be a pleasure to help.

  Have a nice work!

• HP ENVY laptop - 15-k112tx: sensor of fingerprint for my laptop.

  I have recently refreshed my pc which led to unistalling my sensor of fingerprint of my laptop. !!! Now I'm not able to find the driver for my fingerprint sensor. Any help will be much appreciated. !!!
  Uninstalled applications, driver information are as follows:

  Validity WBF DDF-Validity Sensors, Inc. - 4.5.228.0

  @R_Chauhan

  Website of the system driver Support Pages:

  HP ENVY laptop - 15-k112tx

  Find driver validity sensor in the category

  Driver - keyboard, mouse and input devices > validity Fingerprint Sensor drive

  sp72143.exe (26.0 MB)

  A comprehensive Information and download:

  Validity fingerprint sensor driver

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.