HP ENVY 17 t-j000 Quad Edition: changed the user account to the administrator... now it's locked password
I changed my account usually type the administrator using the administrative BACK command:
.
Myuserid NET USER ADMINISTRATOR / ACTIVE: YES
The prompt saying returned the command has been completed successfully. I noticed that my account is still listed as regular, then I restarted the system. Now I'm locked! Apparently, he has a default password.
.
I did not use a password with this account (myuserid), so I don't understand why it now requires one. Someone has an idea what password he needs? Please, how can I fix it?
[Personal information]
Hello
Without the help of any password recovery software, have you tried the rest of the procedure "How to reset a Windows 8 password" contained in the above article. It is thanks to access Advanced Boot Options - command prompt.
If this does not work, maybe someone else can help you. I don't know other options other than what I suggested unfortunately.
Concerning
Visruth
Tags: Notebooks
Similar Questions
-
Replace drive HARD laptop computer HP ENVY 15 t-j000 Quad Edition SSD
I would buy a HP ENVY 15 t-j000 Quad Edition Notebook PC and HP v300a 120 GB SATA Solid State Drive with Upgrade Kit.
Now, the SSD has a thickness of 7mm.
My question is if I can replace the HDD with that SSD? The thickness is the HARD drive Bay in the laptop.
If it is greater than 7mm from the DSS moves inside?
Thank you
Hello
The old HDD on your machine is a little thicker, but at least 4 screws I do not think that new SSD will circulate in the case. I have actually put new SSD in one of my laptop (not HP) and no problem, BUT I don't move this laptop. If so, blue tac can help.
Kind regards.
-
HP Envy 15 t-j000 Quad Edition: screws fell off the bottom of the HP ENVY
Hello. Anyone know the size and type of the screws from the bottom of the HP Envy 15 t-j000 Quad Edition ? These are the small screws that hold the bottom cover of the laptop basically. Somehow mine fell and it is causing many problems. The tilt is extremely limited to a specific position. Disturb the position of the laptop while it is will cause a weird vibration because of the fan on the left side.
If someone could let me know what is size and the type of screws used to lower cover , and where I could find them, I would really appreciate it.
Thank you
aquafemi wrote:
I took the screws a few months ago to see if I could fix it something. I didn't want to dirty things too so I just put them back.
HP Live Kit P/N: 720560-001
This includes the screws for your laptop.
-
What happened to the HP Software and Driver Downloads for my HP ENVY 15 t-j000 Quad Edition CTO Notebook Model # C8P48AV built in July 2013? There were 58 results software and driver for Windows 8.1 64-bit last week when I printed the list last week. Today, I received the following message when I tried my laptop:
We were able to find the drivers for your product. Pilots may be developing, so please, check back at a later date or visit the product home page.
How the hell could all disappear? I hope it's temporary! Extremely disappointed with HP support.
Thank you banhein! Support page for the software and drivers for my model is back! Happy, it was only a temporary problem.
-
I downloaded and installed all the drivers for my product - HP ENVY 15 t-j000 Quad Edition (E4T17AV) - and it still shows a lack of PCI Simple Communications Controller Driver. Can someone point me in the right direction please?
Is the hardware ID
PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C & REV_04
PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C
PCI\VEN_8086 & DEV_8C3A & CC_078000
PCI\VEN_8086 & DEV_8C3A & CC_0780Nope.
That is probably why it is not installing.
The driver is designed for RAID configurations.
I know it does not install not in IDE mode, but I wasn't sure of the AHCI mode.
If you want the latest AHCI driver for your configuration, you can get it directly from Intel on the link below.
The first file listed.
Download and unzip it into a folder. Do the manual update method by going to Device Manager, and then click to expand the IDE ATA/ATAPI controllers category. Click the listed SATA AHCI controller. Click on the driver tab, click on put up-to-date driver, reselect the thing browse and navigate to the folder that you extracted the drivers to.
Make sure that the include subfolders is selected and should install the updated driver.
-
HP ENVY 15 t-j000 Quad Edition CTO Notebook PC Audio
I have a HP ENVY 15 t-j000 Quad Edition CTO Notebook PC e ele formatei e coloquei o windows 7 but after that coloquei o windows 7 Beats Audio REALLY works would any sem Solução o ter as voltar o windowws 8
Try this driver:
-
Updates for HP Envy 15 t-j000 Quad Edition CTO Notebook PC windows 8.1
I have updated the system and returned to original Windows.
Them I have updated to 8.1 windows 64-bit. But I can not find several updtaes as Col. simple 64B? and others who still work in 32-bit.
How can I get updates for HP Envy 15 t-j000 Quad Edition CTO Notebook PC? 64B?
Windows 64 b 8.1 is not simple pass 64B? Software updates for 8.1 64B?
Hi @jezhael
I understand that you have trouble finding drivers and software for your computer now running windows 8.1 (64-bit).
You can find the drivers Hp custom laptop from this page, just be sure to select WIndows 64 - bit of 8.1.
Drivers HP ENVY 15 t-j000 Quad Edition CTO Notebook PC
See the following download SimplePass if necessary:
HP SimplePass Identity Protection software -
Hi all!
I bought the HP ENVY 15 t-j000 Quad Edition and opted for the WSSD 24Go cache as well as the hybrid drive 1 TB. Do I have a problem just buy a kit of cloning and spend the hybrid propulsion system to a full on SSD in the future if I choose to?
I did some research but I can't isolate an answer if yes or no I might encounter problems on account of the Intel RST be "associated" with the traditional HARD drive caching.
So I wonder if I can't just simply disable acceleration of RST, clone HARD drive for an SSD via a cloning kit, remove the HARD and the SSD drive and call it a day?
Any help with this is appreciated!
Purgingomen wrote:
Thanks for the info but I was even more so, I was wondering if I would have a problem Exchange with a new SSD hybrid drive later by cloning.
I thought that I would stick with the 8 GB of RAM and WSSD combo of cache/HDD for now and sometimes down the line (as in a year or two) to get rid of the HARD drive for a full on SSD, disable caching and at the same time move to 16 GB of RAM.
But I don't know if yes or no the WSSD cache/HDD combo makes it difficult to clone and swap the HARD drive and then just leave the disc of "cache" of 24 gigas (which is more a cache drive) there to be upgraded later.
-Rob
Well, I think a pure 2.5 "SSD should work on the system but make sure the cache is removed. For the purposes of cloning, I suggest using the DD command:
-
HP ENVY 15 t-j000 Quad Edition: HP ENVY 15 t-j000 Quad Edition Notebook PC - white screen
Hello
Hey @HPENVY15t-j000,.
Unfortunately your laptop is not setup for a touch screen. This is a link to your page 27 manual replacement parts.
I hope this helps.
Thank you.
-
ENVY 15 t-j000 Quad Edition disk hard thickness
I'm looking to replace the hard drive in my ENVY 15 t-j000 Quad Edition with an SSD. HP site is not currently in the thick of the preinstalled hard drive. I'd rather get an ssd that leaves no extra unused space in the computer. What is the thickness of the hard disk installed in the ENVY 15 t-j000 Quad edition so I can pass to an ssd the same size? Thank you.
Hello
It is very safe to use 7mm thick, as mentioned in my first answer.
Kind regards.
-
ENVY 15 t-j000 Quad Edition Type of Ram for upgrade
I try to add a stick of ram to 8 GB for my ENVY 15 t-j000 Quad Edition. Site HP Web does not list the type/size of ram to find the stick of ram suitable for upgrade. If someone knows this information, it would be a great help. Thank you.
henry_mb wrote:
I try to add a stick of ram to 8 GB for my ENVY 15 t-j000 Quad Edition. Site HP Web does not list the type/size of ram to find the stick of ram suitable for upgrade. If someone knows this information, it would be a great help. Thank you.
Hello
What is the new portable Haswell? This laptop supports modules SODIMM DDR3 1600 MHz, but take a look what original config is. HP uses memory especially two modules config so if there are already 8GB it will be probably 2 x 4 GB modules. I recommend this one:
-
HI guys,.
I have "HP ENVY 15 t-j100 Quad Edition CTO Notebook PC"
Serial number: (deleted content)
Product number: E1P04AAR
Bought a laptp renovated off eBay from someone with thousands of positive feedbacks. It worked great for 6-7 months and then one morning it has not started up. I tried everything, called Hong Kong HP support and even bring to the service center, but was not able to get it fixed because this model was never launched in Hong Kong...
I tried calling HP we support and they would fix it for $ 300 + and that too, I send this laptop in the USA to someone I know and then HP will come from there. Is not possible.
So now what I'm trying to do is to look for the replacement of the motherboard, this is what im says does not work. I searched and found these links - I need to know if it is OK for my model?
It will be a great help if you guys allow me to know which of them is compatible with the model above.
Thank you!!
Hello
It's a CTO machine therefore normally only available in the United States and perhaps the Canada. Please use a portion for PC cards from the following link:
http://PartSurfer.HP.com/search.aspx?SearchText=E1P04AAR
Again, it is a machine CTO, you should check its parts before you buy any replacement.
Kind regards.
-
Upgrade Envy 15 t-j000 Quad Edition CTO to widows 8.1 Pro
I just rebuilt my notebook of Quad Edition CTO Envy 15 000 t for Windows Professional 8.1 but under other devices, I have a PCI of Simple COmmunications controller by mistake with the following hardware ID:
PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C & REV_04
PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C
PCI\VEN_8086 & DEV_8C3A & CC_078000
PCI\VEN_8086 & DEV_8C3A & CC_0780I can't know what device drivers to install for this question.
Any help would be greatly appreciated.
Thank you!
Hello
It's the engine Interface Intel Managent driver at the following link.
http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63410.exe
Kind regards
DP - K
-
HP ENVY 17 t-j000 Quad Edition: back to Windows 8 for a clean install of Windows 7
Hello
My machine came with windows 8. I created the recovery using HP Recovery Manager and then CLEAN Media installed windows 7. Now, I want to take the ferry for windows 8. USB recovery I created got no .exe file. And on Windows 7 there is no HP Recovery Manager. What should I do?
Thank you!
Hey @Omar92,
Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in on your HP ENVY 17 t-j000 Notebook and your issues with HP Recovery Manager. If she has deleted this partition completely, you will need to use your recovery CD or USB key you created when you bought your laptop. Here is a link to use the HP Recovery Manager.Here is a link that shows you other ways to restore the laptop back to 8.1 for Windows. The selection shows how to use a USB device.
Hope this helps you.
Thank you.
-
HP ENVY 17 t-j000 Quad Edition: do I need Internet to Factory Reset my PC with the HP discs
Do I need Internet to do the factory reset on my PC with the HP discs?
Try typing esc you power up and get an option to enter setup (BIOS) which is F10 or just start typing F10 as you power up. You will see a good-looking menu thing on the BACK. Change the date and then click on save changes that you are leaving.
Maybe you are looking for
-
I need help
-
How to replace the WiFi on Satellite A100 module
Can someone please provide me with details on how to install my wireless card as mine has been withdrawn by the company, I used to work for and I want to start using this feature now. ? Thank you...
-
Waveshaping circuit using a 555 timer
I tried to reproduce this circuit much longer. I am trying to use a timer 555 as an Astable multivibrator with a suddenly IC monostable circuit. However, when I create the circuit and use different combinations of RC I actually get a correct output
-
Host VI and cRIO execution time
Hello I have a cRIO 9014, I run an application real-time with two loops and a host of VI in my PC, the host VI is slow kynda, but I would like to know if there is a way to check if the cRIO rotates at the speed it should run. Thank you. -Luis
-
device driver for sony cdrwdvd crx310ee
I have an old dell computer that I use and love. I try to use the cd rom and nothing happens. I looked in Device Manager and there is a problem with the cd rom. The message says windows cannot load the device of this material. E driver may be corrupt