HP Envy 5660: Envy 5660 - No Wi - Fi Direct menu option...?

Similar Questions

• 3rd party option WSSD of ENVY 15 t-j000 or disc MSATA options

  Someone at - he found the options for MSDD or MSATA readers for use with laptops Envy 15 t-j000 series. I'm like something bigger that the 24 GB HP offers and then still no HARD drive as an option for the data.

  Looking for models that would work?

  As I said above, the BIOS are configured so that the WSSD cannot be the boot drive, if there is also a regular SATA installed hard drive. It is hard wired to use as an accelerator cache the MSSD. Many of us would do what you want to do, and at this point, cannot.

  I think that perhaps the EasyBCD software might work so that the system starts the main player but points the main road to the WSSD of full boot. It will be a little slower than the start if you can start directly from the WSSD. I've never tried the EasyBCD software have so no basis to comment, but in theory it could work.

• HP ENVY 17-n013na: the Legacy BIOS boot option does not work

  Support dear HP team,

  I recently bought for laptop HP ENVY 17-n013na .  It came with Windows 8.1. I have to install Windows 7. Unfortunately, the legacy in BIOS boot option does not work for me. Here is detailed information:

  BIOS version: F.04 Rev 5.0

  I tried updating to the latest version of the BIOS on the Support site.

  To activate the option to boot legacy, I followed the following steps:

  • Entered, BIOS configuration utility
  • Go to the System Configuration
  • > Boot options
  • Changed the setting to the Legacy Support on " Enabled"
  • F10 - save changes & exit

  Now, after the restart, if I go once more, configuration of the BIOS Legacy Support is set to disabled. Whenever I have change to active BIOS, Save & Exit, it is up to the people with reduced mobility. Because of that I can't run the installer of Windows 7 DVD.

  Please provide any help & suggestions.

  Thank you.

  Kind regards

  Eugene

  I managed to pass in Legacy mode as follows: http://www.eightforums.com/tutorials/13326-downgrade-windows-8-windows-7-a.html

  Reset the BIOS helped: https://www.youtube.com/watch?v=6KUyZIJ0xOc

  Can close the topic now.

  Thank you.

• ENVY Touchsmart series of J000 15 (J001TX) optional mSATA slot for installation of Windows?

  I wanted to ask you

  1. the question of if we can install a drive 60-120 GB mSATA in mSATA slot and use it as the place of installation of Windows? It would be like having a configuration double hard drive if windows is installed on the mSATA and the 5400 RPM HARD drive is formatted? I know that this could affect the warranty but I'm curious.

  2. also is all models of car mSATA in black list/white list by HP?

  3. when we install a mSATA drive in the Bay, this affect RAM max can we use?

  4. What is the size of the mSATA player who would fit into the available slot?

  5. is the slot mSATA SATA II or SATA III interface?

  Tornado7 wrote:

  I wanted to ask you

  1. the question of if we can install a drive 60-120 GB mSATA in mSATA slot and use it as the place of installation of Windows? It would be like having a configuration double hard drive if windows is installed on the mSATA and the 5400 RPM HARD drive is formatted? I know that this could affect the warranty but I'm curious.

  2. also is all models of car mSATA in black list/white list by HP?

  3. when we install a mSATA drive in the Bay, this affect RAM max can we use?

  4. What is the size of the mSATA player who would fit into the available slot?

  5. is the slot mSATA SATA II or SATA III interface?

  Hello

  Q1: Yes, you can install Windows on a module mSATA on this laptop...

  http://Forum.NotebookReview.com/HP-envy-HDX/729085-envy-15T-J000-mSATA-SSD-HDD-fresh-install-mSATA-boot-drive.html

  I recommend to remove the hard drive if the how does not say that. MSATA module is compatible, so I do not think that this will affect the warranty.

  Q2: Difficult to answer this one, but some guy already confirmed that Samsung PM830 256 GB drives to work with this series. Other models also work, just search this forum...

  Q3: The mSATA can be used as cache or a boot disk. If it will be useful to cache it will not work with 12 GB or more according to the manual of the laptop series. If it will be used as boot drive should not be a limitation, so you can use the max 16 GB or so.

  Q4: mSATA is a format standard/interface/so any mSATA SSD must correspond to the slot, the capacity is not serious.

  Q5: As I said mSATA is an interface (slot), SATA II or III (speed) is a matter of the chip on the motherboard. This is the case even as the typical SATA connection. Connectors and slots are the same, but the speed is founded by the chipset...

• HP envy 4520: cannot print without directly using wireless

  I want to hp 4520. I want to print without using the direct wireless to my laptop. I always disconnect my home wifi network and use network want to live to be able to print wireless. Is it possible to print from my laptop using my local network, or I have to use the direct wireless to be able to print.

  Hello
  
  Try to remove the printer and then add it again by opening the Preferences tab and then selecting «printers & scanners»
  
  From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.
  
  This may help to solve your problem of connectivity.

  

• 7640 envy: how to remove users from scanning options

  When I try to scan to computer printers list several computers and faxes on our network on the screen as an option; How remove these to prevent the display of the list?

  Sorry not my knowledge.

• Envy7645 HP: printing of my book on my envy 7645 printer google chrome

  IM pretty frustrated with my repeated attempts to print from my new book of chrome on my printer wireless hp 7645 envy. Y at - there anyone out there that has a solution for me? Thank you

  Please see the document which contains the instructions for use of HP on a Chromebook print.
  
  http://support.HP.com/us-en/document/c04683559

  Download the application of 'HP Print' on the Chrome Web Store, then run it.  Add your printer by typing the IP address on your network.  (You can find it in the Configuration section of the network on the control panel of the printer.)

  Now, try to print something, either by pressing Ctrl-P, or by using the menu option 'Print' in Chrome.  A window opens showing the 'Destination' of the file.  The first time he usually shows 'Save as PDF' as the default.  Click on the button 'Change of Destination' and select your printer.

  This app works fine for me!

  WyreNut

• 4 - 1025TU envy: how to INSTALL Windows 7 on HP Envy 1025TU expenses 4

  I'm sorry if my question published or wrong thread & wrong language...

  Model: HP ENVY 4 1025TU
  320 GB hard drive
  4 GB OF RAM
  
  The operating system, it was delivered is Windows 7 / 64 bit / Home Basic
  If I want to install the new copy of Windows 7 32/64-bit ultimate, but I have a problem...
  The steps that I did is therefore:
  -Repartition the HDD in 2 (primary/NTFS partition 30% for disk OS/local c., the rest (logic/NTFS) for local disk D)
  -Install Windows 7 x 64 Ultimate on USB...
  
  But the problem was was released in prose in the end done 75%...
  It says configuration error...
  I try to install via the optical disk drive USB & Windows DVD install, but it has the same problem above...
  
  Is there a solution to this topic... ??
  What should I do to solve... ??

  Hello:

  See if it works...

  Download the drivers from this link below second or 3rd listed file - 64 or 32 bits depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and hopefully, W7 should install.

• ENVY dv6-7211tx: Windows 8 for Windows 7 (x 64) "readers are.

  Hello support,

  Due to some compatibility issues with some of my frequently used programs, I decided to move to the bottom of Windows 8 (x 64) back in Windows 7 x 64. Having already made a recovery DVD media, I proceeded to set up the BIOS/UEFI to install Windows 7 from my USB flash drive.

  -Support of Legacy Boot enabled

  -Automatically disabled Secure Boot

  -Chip USB 3.0 Pre-os on 'Auto '.

  -Set the boot priority features:

  + UEFI - floppy USB Flash Drive boot order

  + Legacy - floppy USB Flash Drive boot order

  -Settings saved and left the setup of BIOS

  -Confirmed UEFI setting changes ("press 3010 + Enter to confirm ')

  -Options boot devices entry (F9) to select the boot device

  -Windows 7 installation begins

  When you select "Custom Setup" from the page of installation of Windows 7 offers the 'Upgrade' and 'Custom' option, I'm headed to the hard drive options page (where the user can change/delete/create disk partitions).

  Here, the computer indicates that "no hard disk has been found", and I need to install a driver or to complete the installation.

  In my attempt to solve the problem, I tried:

  -Deactivation of Intel from fast in the BIOS

  -Remove the recovery partition HARD drive

  If you can identify what I am doing wrong or have solutions to this problem, I would be very happy.

  Thank you.

  EDIT: Here are my computer specs-

  ENVY of HP dv6-7211tx

  Intel i7-3630QM

  8 GB of DDR3 memory

  Internal hard drive 1 TB

  Windows 8 x 64 (NOT 8.1)

  Current DVD player

  Specifications of USB media-

  16 GB SanDisk Cruzer flash drive

  Hello:

  Normally this works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 2101 & DwnldID = 23060 & Keyword = Intel + rapi...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and should install W7.

• HP envy 4500: direct printing without having to change the wifi to printer

  To print on a HP Envy 4500 from an Air iPad with iOS8, should I switch my network wifi to the printer whenever I want to print something?
  For example through my email, there are several emails, each with an attachment that I I want to print. I choose my network WiFi, open the email attachment, return to wifi-changing the settings of printer-go back to the document and print it. Wait for it to print. To return to the e-mail, I return to settings-wifi-changes in my next email open network. Then go through the process of return to the printer.
  There must be a simpler way to use "direct print", but when I try to print in the document, he says "no printer found AirPrint."
  Thanks in advance.

  Hello CdnCreekers,

  It seems to me that you print to the printer WiFi Direct printing option. There is an easier way...

  To begin with, I would turn off WiFi directly from the front panel of the printer > select direct WiFi, then turn it off.

  I assume you already have your printer connected to your wireless network, if that's the case, then you just need to print from your iPad. The iPad must be on the same network as the printer to use Apple's Airprint wireless.

  WiFi Direct is a great option for guests to use, but you don't need to have it on in order to print wirelessly on your printer.

• HP envy laptop 4

  Hello...

  my system is HP ENVY laptop PC (B8F41EA #ABV) 4

  System was with win7. But due recovery does not, I installed from USB. Last four days, I tried to install win7 64 bit Ultimate. It is at the time of instalation complest (after copying windows files, extension of windows files, features installation and update) indicating an error. " Windows Setup could not configure windows to run the hardware on this computer."

  so, how can I solve this problem... pls help me.

  Thanks in advance...

  Hello:

  I can't find the model number or the plug on your laptop by entering the product ID you have posted.

  If your laptop has an Intel processor and chipset, restart the installation and follow the steps below and see if it works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and should install W7.

• HP ENVY 17-j162ss - Enable change graphics card on the BIOS

  Hello

  I would like to change the graphics card (intel vs ati) in my BIOS, but I have not any menu option in there.

  My laptop is a HP ENVY 17-j162ss

  Thank you

  You use the NVIDIA Control Panel to control how and when the graphics card performance can be activated. There is no current option that allows the command BIOS graphics solutions.

• ENVY of HP dv6-7215tx Notebook PC back for win 7

  Somebody has experiences in return HP dv6-7215tx Notebook PC ENVY come back to win 7 HP with any success, win 8 just don't do it for me?

  Main prob trying to get around the raid drivers.

  Hello:

  See if it works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and hopefully W7 should install.

  You can then use all the W7 x 64 drivers and software by the dv7t-7000.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5273547

• Envy 17 model 17-j102ea SSD Boot question, Legacy Support, BIOS

  Hi, first post ever and excuse if this has been covered - if so, please me directly to pertinent information.

  Bought an Envy 17-j102ea...

  Hardware problems I would like help / advice for, please:

  Legacy support / boot from USB Flash Stick:
  Tried to install Windows 8 via a USB bootable work has confirmed...
  The laptop does not detect except Legacy Support is turned on...
  Once Windows is installed on drive (1 TB 5400 original disc), if I turn OFF then Legacy Support again (as DEFAULT) it starts not from the installed windows now HDD - only when I put Legacy Support back on will it boot.
  Can someone please explain / advise?

  Question SSD:
  Try to use a 240GB vertex 3 SSD Drive...
  Computer laptop wont recognize it- whether it is in Legacy Support mode...
  I've seen a few posts on the compatibility and 240 GB not supported...
  It's for real?

  BIOS:
  This is a complaint, I want something on this topic, please...
  REALLY.
  Why so basic bios options?
  Why can't have two readers in the laptop and choose which start from the first that is alternate between discs easily when I choose?
  For a decent computer ", a poor quality BIOS, it disappoints BIG TIME.
  It should be fairly easy for programmers to HP create a GUI BIOS updated with the best options.

  * I'm a student in computer SCIENCE and make a clean installation on this laptop with no product key, SSD and a very basic BIOS incompatibility sticker, I find it a little boring, and it takes a lot of my time...

  Looking forward to some useful answers.
  Thank you in advance.

  Oh, I didn't know you meant that.

  Update:

  I bought 8.1 Pro student - implemented on a USB stick (the same Corsair Voyager one) - activated UEFI mode...

  It set up perfectly om the 240 GB agility SSD 3!

  On the F9 boot menu option it acknowledged even the USB as UEFI.

  Very happy now :))

  BUT, can you please help me with something else?

  I put the 1 TB HDD in BAY2 5400 original, and it is not recognized at all.

  Any suggestions?

  So, thank you for your help miuch. : )

  ... LAST UPDATED:

  After rebooting the system TWO it recognizes the 1 TB drive! : )

  Thanks again for your help.

  You have been great, and I learned a lot on the way :)

  Best wishes...

• printed transparent envy 4504

  I want to print on transparenies with my printer Envy 4504, however, there is no transparency option - any suggestions please?

  Hello

  It's HP iron-on transfers or other special papers.

  Kind regards.