HP Envy 700-019 H5P24AA: try to make a System Image disc in windows 8.1 HP envy Office 700-019

Similar Questions

• When you try to create a system image, receive the error code 0 x 81000019

  Get the error code when you try to create a system image on a 900 + GB hard drive with 900 GB of free space. Keeps telling me that there is not enough space to create the image of the shadow. I'm trying the disk image has only 40 GB of data. What is going on? Using Windows 7 64 bit Pro.

  Many hours of searching the Web for answers about a year ago, said that relatively few people have this problem and proposed solutions in the forums have been complex, machine dependent and seem to fail for most of the people who have tried a fix...

  So when I gave up and called Microsoft... they told me to take my problem to anyone assembled my computer...

  The man who built my machine told me not to worry, simply store all my files on the cloud, as he does...

  So now I store my important stuff on a spare drive, we have installed in the box, go to live with the inability to make appropriate backups and restore points...

  All my old computers is standard backups without any hassle... Just this new machine with Win7.

  (The only "new" thing was a disc SSD C... can't believe it would make one difference either, other than speed... and many people use them in 2011...)

• What makes a system image

  Hello

  My brother-in-law asked me to help him to do an image of its new computer system. It is a Dell Inspiron 660, running Windows 7 Home Premium, MSE, WinPatrol Plus and MBAM Pro, and it has all the important updates installed. We will use the windows built to the creator of the image and put the image on an external hard drive. We looked at the tutorials on the internet about how to do it, but we would like to have some tips on a couple of the item before you start.

  In the power Option, there put screen turns off within 10 minutes and the hard drive stops in 15 min we need to define these Never or the the hard disk activity that will occur in the image making process will drive these settings?

  Given that MSE, WinPatrol Plus and MBAM Pro all run them in real time, should disconnect us from the internet, out of WP. MBAM and disable real-time protection in MSE while making the picture, and that all when done? If we left them running in real time, could they do something like new updates of definition, which could alter the image?

  Any help would be much appreciated.

  LKW198

  Sorry for the late reply, as I did a few tests.

  (1) make a system image backup of my C drive (including the recovery partition) on an external hard drive lasts about 30 minutes. It is with my Pro MBAM, WinPatrol Plus, and any antivirus real time without running other programs running and my fast cable internet connection intact. Obviously the size of the backup, the speed of the CPU and hardware all affect this time. I keep my computer on 24/7 and plan these image backups in the wee hours of the morning when I'm not using the PC.  Now, I have a fairly fast processor and lots of RAM, so I recommend you put your hard drive after 15 minutes when a system image backup is scheduled.

  Your monitor off shouldn't affect the backup, as long as the hard drive still works. Almost all my backup images were made with the monitor off.

  (2) as far as I know, there is no need to disconnect from the internet, or stop your AV or MBAM Pro update during the imaging process. Never, I took these measures and was able to restore a system image to backup on more than one occasion. At worst, I guess you could lose the current definition updates, which could be easily corrected by performing a manual update of MSE or MBAM Pro.

  (3) I have just restored my system to a picture external HD that I just created by using the Windows 7 backup. The guest said she "could take a few minutes to a few hours. It took about 35 minutes for me, and as far as I know, all the files and programs have been restored intact. It didn't stop my AV or MBAM Pro.

  I welcome your attempts to back up your system with an image. I think it is the best way to recover from significant malware infection. An image of the system, of course, is frozen both that you make. Anything be added or created subsequently will be lost with a restoration of the image.  I find that a weekly backup image works in practice. All of the important files that I create between two backups, I save to a flash drive.

• What is the procedure how to make my system image backup and data through Windows NAS Server?

  I work the iMac with bootcamp for Windows 7 - Home Premium.

  I want to return to the system image and data etc. of the 'Windows Back up and Restore' to my Synology NAS (network attached storage). When I do the setting changes, I could not find the option to connect to the NAS, but have only the offer to connect to the external hard drive.

  (1) the 'Windows Back up and Restore' allows to connect to the NAS for the back of my files, in particular for the iamge system? If not, any other method to make the back upward, especially for the system image?

  (2) what is the procedure how to make my system image backup and data through Windows NAS Server?

  Original title: save the Windows image

  Backup to a network location is not supported by Windows 7 Home Premium. Do you need Windows 7 Professional or ultimate edition.

  http://Windows.Microsoft.com/en-GB/Windows7/where-should-i-save-my-backup

• When I try to create a system image in Windows 7, I get the error 0x8078002A and 0x8007045D code

  I'm using Windows 7 Ultimate 64 bit and try to create a system image on my 3 TB USB 3.0 Seagate Expansion. A few seconds after the start, the backup fails and displays the message:

  The backup failed.

  One of the files of backup could not be created. (0x8078002A)

  Additional information:
  The request could not be performed because of an i/o device error. (0x8007045D)

  I tried to create a system image to multiple computers, which results in the same error codes. I reformatted the disk and run chkdsk, but to no avail. If anyone has any ideas they would be greatly appreciated.

  I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum is frought with for a windows problem reports. I know that I was very impressed when I tried it. Two me are familiar with and like Norton Ghost (which I use for 7 years without the 1st problem) and Memeo, which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com. You can get Ghost for almost nothing (like me), if you look at the sales.

  CNET has a lot of reviews of backup program to

  http://download.CNET.com/Windows/backup-software/?tag=contentBody;sideBar

  .

  Some of them are free (the last time I checked there over 300), some have free trials (more), and some are buying only (more than 200).

  Good luck

• Try to use the System Image to migrate from Windows 7 for SSD for boot upward

  Hello

  I have a new computer Windows 7 operting.   I'm trying to migrate my OS to SSD for faster boots, etc..

  I first tried various 3rd party applications such as EaseUS Partition Master and Reflect, all futile for unknown reasons.

  Now I'm having problems using the built-in tool "Create a System Image" Windows 7.

  The Image of the system seems to be created properly and is listed in the appropriate folder.   The next step is to use the Windows 7 USB/DVD Download tool to save the ISO file, then use this ISO on the DSS file.

  Unfortunately, despite all that I've read to the contrary, the file created by windows wasn't an ISO... it saved as a VHD file.   The download tool cannot copy VHD - only ISOs.

  Microsoft technical support suggested that I have post the question.   All the patches?

  Thanks in advance!

  What happens when you boot the system repair disc?  If necessary, you will need to enter your BIOS Setup utility and make your optical drive the first boot device.

  You have created the system image includes everything: the files of your operating system, your application to the program folder and your data.  Assuming that you have already used your system for awhile and so Windows, your installed programs and files total user more than 128 GB, the image does not fit on the SSD.

  If everything except your totals of less than 128 GB user files, then a possible scenario would be to backup all your files from user to some external medium data, confirm that the backup is valid, and then delete the files from the current hard drive.  Then make an image of system of what's left (which is now less than 128 GB) and restore that image on the SSD.  You create a new user profile and then copy your files from backup data on disk 1 to and link to your user profile in the user data (see tip below).

  Another alternative, especially if you have more than 128 GB used even without your data, is to do a clean Windows 7 on SSD install, reinstall all your application files, specifying as much as possible of the facilities is located on the 1 TB drive and your profile link to the data of the user on the 1 TB drive.

  This trick of sevenforums.com can help with the problem of having windows on the SSD and your data on the disk rotation:

  If you are simply wanting to save files HARD disk space in your user folders, you might consider this below in order to access the files in your library with the actually located files where you want to place. This way you won't have to worry about the potential problems that come with mobile user folder locations.

  • Create a new folder to any location you want.
  • Move all the files you want in the new folder.
  • Include the new folder in a library of your choice.
  • If you wish, you can also set the new folder to be default 'save' for the location for the library as well

  To do a clean install of Windows 7 on your SSD, follow the instructions here to get a file ISO of Windows 7 to the same version of Windows 7 that is preinstalled on your computer: https://www.heidoc.net/joomla/technology-science/microsoft/67-microsoft-windows-and-office-iso-download-tool burn the image on a DVD (Note: you can not just copy the files, use the built-in tool to burn dvd of Windows 7 or free third-party tool like ImgBurn).  Use the product key from the label on your computer (not the key retrieved by using a key finder program) to activate Windows.  See https://techingiteasy.wordpress.com/2012/04/13/how-to-activate-windows-7-oem-license-using-a-retail-disc/

  If this all sounds complicated - it is, and I haven't provided all the details - you can consider getting the help of a local independent computer repair shop (not a chain of stores).  Just make sure you get a real installation of Windows 7.

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• Get the error (0 x 8078119) when you try to create a system image in Windows 7

  Original title: shadow copy volume
  Hello

  I currently have problems with creating a system image, because it comes back with the error (0 x 8078119) now I know it's, it's to do with the lack of disk space of 100 MB (startup disk or something like that) but with mine I have 62% of free space that is 63 MB available space for me (Please note the 100 MB drive for me is 102 mb)
  so I was wondering if anyone can help, because I had a virus before and ended up losing everything, that I don't really want to breed

  Hi Jugganourt,

  Please see the troubleshooting following thanks Divya R:

  Step 1: Check if the shadow copy Volume service is running.

  1. Click Start and type services.msc in the search box

  2. double-click on the Volume Shadow Copy Service.

  If you receive a Configuration Manager message, click OK.

  3. in the Startup Type list, clickAutomatic, and then click OK.

  4 services nearby.

  5 restart the computer.

  Step 2: Open Event Viewer to check the exact error message:

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Check out this link to open the event viewer:

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Open event viewer and navigate to the following location: applications and services Logs\Microsoft\Windows\WindowsBackup\ActionCenter.

  Step 3: You can also generate a log file by following the instructions below and send us the details.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  1. Click Start-> Run-> type regedit.exe.

  2. navigate to HKEY_LOCAL_MACHINE NT\CurrentVersion\Asr, create a new key called LogFileSetting.

  3. under LogFileSetting, create a new DWORD value called EnableLogging.
  Right click on this value, click on edit and then type 00000001 (hexadecimal)
  or 1 (decimal).

  4. under LogFileSetting, create a new string value called LogPathName.
  Right click on this value, click on edit and then enter C:\asr.log.

  5. then, to reproduce the error. You should have a file called asr.log in c:\

  6 copy the content and after us.

  Thank you!

• Try to make a 3D image

  I'm trying to make a picture of 2 d 3 d in photoshop 6. More specifically, I have a scan of paper cut to resemble a piece of chalk. How all that actually look as if it was an object and not a piece of paper?

  You could create this in Illustrator very quickly. Start with a circle filled and stroked with your chalk color and adds 3D effects. It took less than 5 minutes.

  5

• When you try to create a system image on an external hard drive, I have an I/O error ox8078002A.

  I use an HP Pavilion dv7 notebook PC and a 3 TB of Seagate external hard drive USB 3.0.  Operating system is Windows7 64 bit.  Support Microsoft suggests running chkdsk /R on the Seagate drive and I am currently doing this (time consuming).  Another post suggested trying another USB port, but producing the same result.  Any other suggestions?  Thank you.

  I consulted the Seagate Support site and learned that the backup drive Seagate Plus will back up only data, not file system.  He is going back to the store.  Thanks to those who tried to help him.

• When you try to run the system on gateway mx6453 recovery, recovery begins a box opens indicating the system restore is incomplete, please insert the cd or dvd

  try to run the system on gateway mx6453 recovery, opens the recovery page, but then appears a box that says system restore is incomplete, please insert the cd or dvd.  the recovery partition seems to agree.

  Hello

  · Why are you running the system recovery?

  · Are you able to perform system restore on the computer?

  I suggest contacting the manufacturer of the computer, the link you can check: http://support.gateway.com/support/default.aspx?cmpid=topnav_support

  For reference: Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796

• HP Envy Office 700-019: runtime error

  While trying to open the photo, I got a runtime error, "program of % file Manager\ Photo Apps.exe

  This application has requested to terminate in an unusual way, contact the Application support team.

  I can't find the path on which it is and I am at a loss on how to solve this problem, try restoring the system, CMD as administrator and type in sfc/scannow, which came with Protection of Resourse Windows found corrupt files but was unable to solve some of them. Details are provided in convertible bonds. Newspaper. Note that logging is not currently supported in OFFline servicing scenarios. C:/Windows/System 32/CMD. I have no idea what this means or how to fix it, if someone can guide me I would appreciate it. In addition to this, I'm always is to be said that I have no admin privalages yet I'm the only user. Can anyone help please.

  Use Windows IE11 8.1 64 bit desktop, HP Envy 700-019.

  Hello

  You cannot store a system image from Microsoft on a USB flash drive.

  But, you can store an image of Microsoft System on an external USB drive.

  The flash player can be used to create a boot disk Microsoft Recovery. The recovery image must be created on an external USB disk (not a memory stick / flash drive).

  You use the bootable flash drive to boot the PC to the recovery environment where you can select the system image saved on the USB drive to reimage the HARD internal disk. But your system includes questions in order to create a system image now would perpetuate the problem.

  I think that the corrupted system files may contribute to the problem.

  You must really try a refresh or use the HP recovery disks to restore the system to a clean state. Then configure the system you like.

  Now create a boot USB recovery flash drive and a good system image on a USB drive for use when the PC behaves badly.

  Jaco

• Skype crashing when I try to make a call 7.9.0.103

  Hello.
  
  I never had this problem before it started today. When I try to make a Skype call it always crashes. It works perfectly until I make a call. I tried to rename the Skype folder in %APPDATA%\microsoft\windows\sendto and deleted the db folder, but none of them seem to work because I still have the same question. I added my hope to report dxdiag that you guys can help me. Thanks in advance

  The Windows event log:

  Log name:      Application
  
  Source:        Application error
  
  Date:          5.9.2015 01:22:44
  
  Event ID:      1000
  
  Task category: (100)
  
  Level:         error
  
  Key words:      Classic
  
  User:          n/a
  
  Computer:      Skynet
  
  Description:
  
  Name of the failing application: Skype.exe, version: 7.9.0.103, time stamp: 0x55ddec34
  
  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.16384, time stamp: 0x5010ac2f
  
  Exception code: 0xe0fafac1
  
  Offset: 0x00014b32
  
  Process ID vulnerabilities: 0x15dc
  
  Start time of application vulnerabilities: 0x01d0e7602bd05ad6
  
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  
  Path of the failing module: C:\Windows\SYSTEM32\KERNELBASE.dll
  
  Report ID: 7640be1c-5353-11e5-bfb7-54a05052abbd
  
  Faulting full name of the package:
  
  ID of the failed package-parent application:
  
  The event XML:
  
  
  
    
  
      
  
      1000
  
      2
  
      100
  
      0 x 80000000000000
  
      
  
      1594832
  
      Application
  
      Skynet
  
      
  
    
  
    
  
      Skype.exe
  
      7.9.0.103
  
      55ddec34
  
      KERNELBASE.dll
  
      6.2.9200.16384
  
      5010ac2f
  
      e0fafac1
  
      00014b 32
  
      15dc
  
      01d0e7602bd05ad6
  
      C:\Program Files (x86)\Skype\Phone\Skype.exe
  
      C:\Windows\SYSTEM32\KERNELBASE.dll
  
      7640be1c-5353-11e5-bfb7-54a05052abbd
  
      
  
      
  
      
  
      
  
    
  
  

  Edit: added Windows event log

  Try to uninstall the currently installed version of 7.9 and install the older version of Skype 7.8.0.102 using this Setup program:

  http://download.Skype.com/MSI/SkypeSetup_7.8.0.102.msi

• My destop all icons are colored and when I try to make crystal or visible, I can't change

  My destop all icons are colored and when I try to make it transparent or visible, I can't change

  Click the Start button, select Control Panel

  Check points: -.
  1. in the performance and Maintenance/adjust Visual effects or if you use the classic theme - settings/system/advanced/performance
  'Use the shadows of the desktop icon labels -' must be checked
  2. right click on the desktop, point to arrange icons by and ensure that items Web Lock on Desktop is unchecked;
  3. If you have content web on your desktop, transparency does not do a right click on the desktop. Select properties, then go to the Desktop tab.
  Click on the button customize the desktop, and then open the Web tab.
  Uncheck everything in the box of Web Pages
  Press OK, then apply and OK again.
  4. you can't have a file html as wallpaper, it must be an image file.
  It is sometimes necessary to restart to take effect, sign out and then sign back in.

• Error "classic asp not installed" when I try to make the purchase on a Web site.

  Original title: I am asp error whenever I try to make the purchase on the website, any help on this

  classic ASP not installed

  Communicate with those who are responsible for the Web site.  There is nothing wrong with your machine, it's their server which has problems and is perhaps misconfigured.

  You can't solve their website of your machine.

  Steve