HP Envy 700-047C Windows 7 drivers
Hello!
I found most of the pilots looking through material ID's for this machine, but I have two left that I have no luck finding. The hardware ID are:
PCI\VEN_1002 & DEV_6611 & SUBSYS_90C41B0A & REV_00 - should be Radeon HD 8570 for Windows 7
SEE Solution for problem with HD 8570 on Windows 7
PCI\VEN_8086 & DEV_1C22 & SUBSYS_2ADA103C & REV_05 - SM Bus controller
DRIVERS FOUND: https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20019&lang=eng&OSVersion=Windows%207...
The OS I'm looking for is Windows 7 64 bit.
Thanks for your help!
Finally he sucked and called AMD (since HP telephone support has been no help). They said the map right now HD 8570 is OEM only and since it is not offered as a public card video drivers do not exist for him. I was told to wait a few more months for the card to be released, and then the pilots should be achievable for Windows 7.
Right with you we say Frank thank you
Tags: HP Desktops
Similar Questions
-
I recently installed Windows 7 on my hp envy 700-414 and missing a lot of pilots. A user by the name of banhiem gave me a link to download the drivers of a 700-230 hp envy. After I did it, I clicked on another link, it gave me to install the Realtek network controller. Whenever I tried to install the driver, it would tell me that I did not meet the requirements. Other drivers work fine now, except the network controller. The steps on how to fix this error would be greatly appreciated.
Hello:
See if this card wireless driver works...
The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated in the supported models that run an operating system supported.
-
HP-ENVY 700-214: help with drivers, please.
Hello
I know that the installation can be done, I just need to know if the drivers are from? or will support me the installation of windows 7 Home premium. 64 bit. I can't get an answer from HP support.
Any help would be greatly appreciated and thank you.
Bonnie
Hello:
Support pages are working again and all the W7 x 64 drivers for your PC are on the link below...
Don't forget to make your set of recovery disks before installing windows 7, because once you do, the recovery partition very probably will not work any longer. See this guide for how to do this.
http://support.HP.com/us-en/document/c03481733
In order to start from a DVD and to run Windows 7 on your PC, you must first change two settings of the BIOS.
Check out this guide for which parameters to change.
-
Envy 17 - j020us Windows 7 drivers missing
Hello
I just bought a HP Envy 17 - j020us today. It came stock with Windows 8 is installed and I have, for my own reasons, decided to install Windows 7 above. Long story short, the installation has worked, for the most part. The only problem was that I was missing some drivers. I searched and found http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/ENVY-17-j020us-windows-7-driver... which was very helpful. However, there's still about 3 pieces of material that is not installed, the drivers with the network controller. I have attached hardware IDS and compatible IDS is available upon request for any "missing" material below. Can someone help me find the drivers?
Network controller - hardware ID:
PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086 & REV_C4
PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086
PCI\VEN_8086 & DEV_0887 & CC_028000
PCI\VEN_8086 & DEV_0887 & CC_0280
Feature 'Unknown' - hardware ID:
USB\VID_138A & PID_0050 & REV_0060
USB\VID_138A & PID_0050
Feature 'Unknown' - hardware ID:
ACPI\INT33A0
* INT33A0
Any help would be appreciated. Thank you
Hello
Please try:
1. network: http://ftp.hp.com/pub/softpaq/sp57501-58000/sp57976.exe
2 validity sensor: ftp://15.217.49.73/pub/softpaq/sp45001-45500/sp45050.exe
3 Please try: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20866
Kind regards.
-
Want to 700-74 Windows 7 drivers please help!
I recently downgraded my HP Envy 700-74 of windows 8, Windows 7 and I have questions find my pci simple communications controller and the video driver Please help!
PCI Simple Communications controller
PCI\VEN_8086 & DEV_8C3A & SUBSYS_2AF3103C & REV_04
PCI\VEN_8086 & DEV_8C3A & SUBSYS_2AF3103C
PCI\VEN_8086 & DEV_8C3A & CC_078000
PCI\VEN_8086 & DEV_8C3A & CC_0780Video driver
PCI\VEN_8086 & DEV_0412 & SUBSYS_2AF3103C & REV_06
PCI\VEN_8086 & DEV_0412 & SUBSYS_2AF3103C
PCI\VEN_8086 & DEV_0412 & CC_030000
PCI\VEN_8086 & DEV_0412 & CC_0300Hello:
Be connected to the internet, click the simple comms PCI controller, click on the driver tab, click on update driver, select Auto search and update of Windows must download and install the necessary driver IMEI.
For video, this driver should work...
-
ENVY 17-j020us windows 7 drivers
Good afternoon
I recently bought a HP Envy 17-j020us to one of my vendors, but we only run windows 7 in our office
I am trying to load windows 7 on this computer and cannot find drivers available for it, no network cards do not work, neither is really the other devices
anyone has any idea where I can get these drivers?
Thanks in advance
Hello:
Most of the W7 x 64 drivers of this model should also work on yours except the graphics.
For the graphics, first install the Intel driver from the link below.
Then install graphic driver nvidia from the link below.
http://www.nvidia.com/download/driverResults.aspx/68502/en-us
For USB 3.0, using this driver.
Please post the ID of the hardware for the network controller (wireless card) because I don't know what model of card is in this book.
If you don't know where to find the hardware ID, please read the guide at the link below.
-
HP Envy dv6z-7200 windows 7 drivers
I bought this laptop about a month ago and it came with windows 8. I had many problems of lag with windows 8 specifically the broker store sucking my CPU usage, I also had problems with the mouse causing windows pop up with the operating system. I threw the windows 7, a single usb port worked thereafter, but it was enough to download some drivers networks so I can get on the internet, well then I downloaded drivermax and went to the city. Unfortunately now none of my usb ports work, I have also some bass with my beats speakers and usb drivers and its narration are up-to-date, in my device manager I have pci device, sm and 2 controllers under other devices usb bus controllers, saying they need drivers, windows does not find and pilot says my usb key max are up-to-date the other two drivermax says need to update but I have no more download for awhile, please help?
Hello:
Here are the links to the drivers, I think that you need.
First, install the AMD chipset drivers and restart. You want the first file listed in the page.
This should install it the smbus and usb3 controllers.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Audio: See if it works.
PCI device:
-
HP Envy 700 406 PC: windows 7 drivers for hp envy 700 x 64
I bought a PC HP Envy 700 406 which had originally windows 8.1 on it, but due to problems of compatibility to work, I had this downgrade to Windows 7 Ultimate 64-bit. Now I have to get all the drivers to make these computers run smoothly again, but the Internet HP site has only the drivers listed for Windows 8.1 for this PC. Can someone tell me where to find the drivers I need?
Hello
AMD SMBUS driver
http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65990.exe
Driver USB 3.0 AMD
http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69719.exe
CODEC Audio of IDT high definition (HD)
http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67081.exe
Alcor Micro USB driver card reader
http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69823.exe
AMD graphics driver
http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69692.exe
RF remote control for viewing slide show and eject pilot
http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66396.exe
Controller Realtek network driver
http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67085.exe
Driver LAN wireless Broadcom
http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69679.exe
Driver Bluetooth Broadcom 2070/20702
-
HP Envy 700-414: HP Envy 700-414 Office windows 7 64 drivers
I didn't like Windows 8.1, because of crashes and recoveries almost every day. So I contacted HP, does not and according to the frustration, I erased the hard drive, disk recovery and all partitions and installed Windows 7 ultimate 64 not knowing not only desktop 700-414 HP Envy Legacy CMOS and HP support don't like no change of. Also, the biggest problem is supported for the HP Envy 700-414 Office windows 7 64 drivers are extremely hard to find, especially drivers LAN Modem, if they exist in HP supports. What can I do?
Hello:
This model has the same motherboard as you and has a complete set of W7 x 64 drivers.
Do not use the BIOS or the files of the firmware of this model on your.
-
HP ENVY 700-029eb desktop PC. Update to Windows not sure 8.1?
Hello world
HP ENVY 700-029eb-computer for office
Model: E3H39EAWindows 8
A question related to the following message on my HP computer:
-----------------------------
HP has not tested this PC with Windows 8.1
For this reason, HP is unable to update providence instructions or Windows 8.1 drivers.
You can now lose stability and basic functionality if you try to update your system.
-----------------------------A Windows 8.1 update could make the System unstable, so the message of HP.
But my computer is always busy preparing the update and guard asks me to do the 8.1 update.
So can I install Windows 8.1 safely on this computer? Or how to turn off the update?
We appreciate your comments and advice.
GuyterB1964, welcome to the forum.
I do not understand these messages. Here is the download page for software and driver for the computer. As you can see, all the drivers for win 8.1 are listed. They would not list them as much as they have not been tested. I see no reason not to do the update.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
-
So just a week after the arrival of my new desktop PC (earlier this year), I had a massive failure of hardrive. I have access in a similar to several corporations hardware industry and had several including a beautiful 248 G SSD kingston hardrives onsite. Having said that I do not think there sucj a problem just install the new SSD in read to send the unit back to HP for repair. I needed this system running and had no time to wait than the lead time of him having returned repaired, about 7-10 days. Yes, it was a huge mistake that has made this system essentially unusable. I did not like the unit running windows 8.1 because it was not a touch screen. I got a new Windows 7 Pro, which I installed it and he posted fine and oots upwards in seconds. No audio beats, but it's not really my thing, no biggie. I can not find information on obtaining network, adapters, Lan, Wan drivers and basically can not access my services Adobe CC, which is my main fucntion. I have since bought a Dell and never have a problem with sys op separate etc.. I return to the problem of tis after several monts and decided I will ive it oe more attempt and them I think Im going to test the aerodynamic viability of this office. I am sure that it will fly ut Im not confident on its ability to land without damage! Please help if you can.
Hello:
See if the W7 x 64 drivers of this model works on your. It has the same motherboard.
Do not use the BIOS or the files of the firmware of this model on your.
-
I'm fed up with the problems resulting from Windows 8.1, for example the program incompatibility, Slow / no response in browsers, particularly IE 11, forced to use touchscreen interface style on conventional monitor and so on and so forth. I have a license of Windows 7 Professional 64 bit for my Dell Vostro laptop. Can I use it on my HP Envy Office 700-329 to replace Windows 8.1?
Hello:
It is forbidden to transfer the license OEM of Windows or using product key OEM the Dell laptop on HP desktop computer.
Please read the FAQ below... specifically...
Q. my client bought a new PC and wants to move the OEM software from the old PC to the new. Users cannot do what they want with their software?
A. no, the OEM software is licensed with the computer on which it was originally installed and system is linked to the original machine. OEM licenses are licenses for single use which cannot be installed on more than one computer system, even if the original machine is no longer in use. The 3668Microsoft Software License Terms, that the end user must accept before using the software, say that the license may not be shared, transferred or used concurrently on different computers. System integrators must provide support to the end user for the Windows license on build computers, they cannot support licenses on computers that they did not build. It is a fundamental reason why an OEM System Builder license cannot be transferred.
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx#fBid=Q44RMvZYHTG
If you want to buy a license support and installation of W7, you can use the W7 x 74 drivers and the software of this model on your own, except the BIOS and firmware files.
http://support.HP.com/us-en/product/HP-envy-700-desktop-PC-series/6886619/model/6988376/product-info
-
HP ENVY 700-406: drivers
Hi friends, during the Christmas holidays I bought a HP ENVY 700 PC, I tried to adjust Windows 8.1 but I didn't really take care of him so I formatted the HARD drive and put Windows 7 on it instead of this, everything works ok except for the drivers window show me that I'm missing these 3 drivers
USB\VID_0A5C & PID_216C & REV_0112
PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C & REV_01
PCI\VEN_1022 & DEV_7814 & SUBSYS_2B17103C & REV_09
Thanks in advance
Hello:
See if these drivers work...
First install the amd chipset drivers and reboot. Who should install the last ID that you have posted.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Try this driver for the first device ID:
.. .and this one for the second.
-
HP ENVY 700-000z Desktop PC with 8 and the need to know if I can install Windows 7
Just bought HP ENVY 700-000z Desktop PC equipped with 8 and need to know if I can install Windows 7 on this computer without problem. My work does not allow the use of Windows 8. If I can install Windows 7, what version of operating system do I need to buy to do a clean install.
If I understand correctly, I could order the Windows 8 Pro, who has right to demotion and then install Windows
7 pro, I have then I should be able to get the drivers, I need HP is correct.
WARNING *.
HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.
Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.
You should ENABLE 'Secure Boot' and maybe 'Legacy Support' in the 'BIOS Setup boot secured' on the settings page below, before you try to install Windows 7;
or
In addition, as the hard drive is partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" in the start menu "F9". If "UEFI - CD/DVD drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.
I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive.
Most of the Windows 7 drivers from the drivers of HP Pavilion p7-1299 c desktop PC page should work on your desktop HP ENVY 700 - 000z CTO. Both models use a variant of the motherboard HP Jasmine. If you have missing or unknown devices after installing the drivers, please post the "Hardware ID" Device Manager for devices as shown in the example below.
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
HP Envy 700-074 Graphics Card problem Windows 8
Greetings,
I recently bought the HP ENVY 700-074 (http://http://h10025.www1.hp.com/ewfrf/wc/product?cc=us & dlc = in & lang = to & lc = in & product = 5371495).
Initial setup went fine without any problem. I replaced the power supply so that I could add the graphics card from my old computer. The power supply and graphics card worked perfectly for my old computer. Feeding is a BFG Tech GX 550 watt modular power supply series. The graphics card, I have installed is the Nvidia 560ti.
The problem is that, when I start the computer, my screen goes to sleep (as there is no signal) until the login Windows 8 screen lights up. At this time, my screen lights up and it is normally. However, if updates or restarts the computer, the screen turns off again and he returned sometimes when loading the desktop computer. I tried to get into the BIOS to see if I could disable the onboard graphics, but I have been unable to access BIOS because I don't see anything on the screen during startup. I removed the Nvidia card and returned to the use of the integrated graphics card and everything is back to normal. I managed to enter the BIOS at the time here, but I don't see any possibility to disable the integrated graphics card or use the PCIe as main display (unless I missed something).
I also noticed that Windows 8 shows I have 2 screens installed when only 1 is installed physiclaly. My HP (HP 2009 m) monitor is listed in Monitor 2 and I initially had to go through the windows to get my HP Monitor to display the entire desktop (as it origionally extended from the start, the desktop computer). However, number of monitor 1 is listed as monitor of generic cards. Thinking that the computer used the non-existent monitor like main display when starting, I deleted the generic monitor than to have to reinstall windows. I also tried to disable, but the problem persists.
I guess that there is a conflict between the integrated graphics card and the Nvidia card. However, I assumed that the edge will be disabled automatically after inserting a card into the PCIe slot as the integrated graphics card watch is no longer under device mananger.
Hello:
Have you changed the settings of the BIOS 2 (required) before installing the video card no HP?
If this isn't the case, please read the info on the link below.
Maybe you are looking for
-
Re: Satellite A350-20s - sound crackling with a loud high-pitched
Hello I have a problem with the speakers on the Toshiba Satllite A350-20s. When I turn the sound on all I get is a crackling sound with a very high-pitched. Seems to get by if I plug in external speakers but one have a similar problem if I plug in a
-
Satellite P300 - Microphone is not working after installing Windows 7
Hello I recently did a clean install of Windows 7 on my Satellite P300. The microphone has been fine with Vista but does not currently work with Windows 7.I tried to go to the sound section and it does not list the casting Mike - just struggling. Can
-
I need current pass please send me. Ty Cnu9191xhm
-
BlackBerry 10.0.09.1675 Dev Alpha Loader not found
Someone check it please? The URL on: Update the software of the device BlackBerry Dev Alpha 10 Does not work here.
-
How ScrollView + gestureHandler (pinch) work together?
I'm need ScrollView + gestureHandler (pinch) to large image scaling. If I use: Container { ScrollView { gestureHandlers: [ PinchHandler { // scaling code here } ] } } It does not together (ScrollView simply handle scroll events, but other gistureHand