HP envy could not be restored by the dvd

Similar Questions

• "The iPod could not be restored. An unknown error occurred (1433). »

  During an attempted - unsuccessfully - to restore an iPod Classic 160 GB end 2009 (model number A1238, 2173 EMC) model to its factory settings, I repeatedly met the following error message:

  "The '< name >' iPod could not be restored. An unknown error occurred (1433). »

  What can I do to fix this?

  Do the following If you find an error in the 1400 range when you restore or update iPod in iTunes - Apple Support

• I get this massage the iphone could not be restored an unknown error occurred (3014)

  I get this massage the iPhone could not be restored an unknown error occurred (3014)

  What can I do?

• Restore error 'file \minint\System32\kdcom.dll could not be loaded. The error code is 4 "

  Hello...

  I have a DELL D830 with XP and I get the message:

  File \minint\System32\kdcom.dll could not be loaded. The error code is 4.

  Everytime I try and restore my computer...

  What can I do to fix this, that does not cost a lot of money?
  The only cost of $180 (refurbished) computer... I really don't want to pay that much to fix this...

  It sucks, virus SUCK!  Why do people do the virus? (it seems lame)

  Help, please!

  I had installed security trend, however apparently the virus that caused this exceeded the trend...

  Hi NickRider,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Disconnect all external devices and try to start the computer.

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• "The phone"iphone"could not be restored. An unknown error occurred (6)"when I try to restore/sync my iphone to my itunes.

  RESET INTERNET PROTOCOL

  I'm following a convenience store from apple that I get this message:

  "The phone"iphone"could not be restored. An unknown error occurred (6).

  When I try to restore/sync my iphone to my itunes (first time I did it because it's a new phone - not new so I have no guarantee Apple).

  I have no problems with the internet, only the problem of the iphone/itunes. Reset the internet protocol allows, as says apple? It is not sensible, but if I decide to do, it will cause me problems internet, if in fact it wasn't the question in the first place?

  Thank you

  Hello CorZT

  Windows answers is not the appropriate forum for your question about Apple products. For the systematized with Apple and its products, please visit the link below.
  http://www.Apple.com/support/iPhone/

• System Restore: after rebooting, the prompt window, says the system could not be restored.

  System Restore:

  All the points are there and trys to restore systems and restarts the restore. After the reboot, the prompt window, says the system could not be restored. Any suggestions?

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• My iPad 2 could not activate after installing 9.03. Say... could not be activated because the activation server is temporarily unavailalble. I tried to 'activate' for four days... went to an Apple store bar 'Genius' and still no solution.

  I have an iPad 2 and before executing the last IOS 9.3 update, it was a camera works perfectly well. I don't have any iCloud upward. I have the valuable photos and info on my iPad that I don't want to lose!  Now I can't even use it!  He failed to activate after the execution of the update and is now in an infinite loop.
  The display shows the following:

  Could not active iPad. Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a couple if minutes. If the problem persists, contact Apple support. .... Try Again... and again...

  I was 'Try again' for four days and spent a day at the Apple Genius Bar store.  They could not find a "fix" and suggested I send my iPad in California and pay for data recovery, because the next step would be to wipe my iPad!  ***!

  I understand that you're angry about the issue of server activation, but sittuations as why it is so important to backup your data using iTunes or iCloud. You never know when you might have to restore from a backup.

  http://appletoolbox.com/2016/03/iOS-9-3-activation-error-update-fix/

• The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Restart

  I created a ghost of a 32-bit 2003 server image and tried to restore the image on the same server of model\type. I got an error message with the following.

  The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Turn it back on.

  Tried to fix the server with the operating system and can not find the disk driver. I found the driver load it on a floppy disk, f6 entry, insert the diskette. I have a message with the following text.

  Type EXIT to exit the consul of recovery and restart the computer.

  1 C:\Windows

  which windows installation would you like to log on

  (to cancel, press enter)?

  Hi MichelZelensky,

  The question you posted would be better suited in the Windows Server Forums. I would recommend posting your query in the TechNet Forums (Windows Server).

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• Ordinal 423 could not be located in the dynamic link library urlmon.dll

  After the download of Internet Explorer 8 and computer restart, I get the error message that the ordinal 423 could not be located in the dynamic link library urlmon.dll. I have nothing, no start menu, icons whatever it is. even when you start in safe mode. Please help me solve this problem

  Thank you

  After the download of Internet Explorer 8 and computer restart, I get the error message that the ordinal 423 could not be located in the dynamic link library urlmon.dll. I have nothing, no start menu, icons whatever it is. even when you start in safe mode. Please help me solve this problem

  Thank you

  You can either try the system restore before installing corrupt of IE8 has taken place or you can try to copy / to register theurlmon.dll in doing so:

  Click the Windows key + R key on your keyboard to open the command run and type:

  regsvr32 urlmon.dll click [Ok ] or press [Enter ] on your keyboard. Reboot and see if you can see the desktop.

  If you have still questions try clicking on the Windows of your keyboard key and open the start menu, click onall programs > Accessories > system tools > System Restore.

  How to reinstall or repair Internet Explorer in Windows Vista and Windows XP
  http://support.Microsoft.com/kb/318378/

  How to uninstall or remove Internet Explorer 8?
  http://support.Microsoft.com/kb/957700/en-us

  How to solve Internet Explorer 8 installation problems
  http://support.Microsoft.com/kb/949220/en-us
  How to solve Internet Explorer 8 installation problems
  http://support.Microsoft.com/kb/949220/en-us

  How to install Internet Explorer 8
  http://support.Microsoft.com/kb/970310/en-us

  Let us know your progress or if you need more help.

  NASS - http://www.nasstec.co.uk

• Windows Live Mail could not be started. The application could not open the Windows Live Mail message store error code: 0x800C0155

  Origianl title: windows live does not open

  My Windows Live Mail has recently stopped working, by double-clicking on the desktop icon top of page does not open the program, appears it the "Windows Live Mail" logo and then a message saying:-"Windows Live Mail could not be started. The application could not open the Windows Live Mail message store. Your Windows Live Mail mailbox is currently being used by another program, such as a virus scanner. close the program or wait so he could complete its operation, then open Windows Live Mail again. (0x800C0155).

  I tried to reinstall WLM, restore my computer, remove anti virus protection. Nothing works

  Help, please!

  Hi B Clinton,

  For a more specialized on issue of Windows Live Mail help, send your query on the Windows Live Forum.

  Windows Live Forum -http://windowslivehelp.com/

• Windows Mail error message: "some of the files could not be found and could not be attached to the message." You want to send the message anyway? »

  original title: end this message appears "some of the files could not be found and he could not be attached to the message." You want to send the message anyway? "I am running Windows Vista Home Basic Edition
  Hello
  I'm so frustrated, this problem has arisen at a very bad time!

  I started to use Windows Mail a few months ago and have had no problems so far, since Thursday night, every time that I attach a file to an e-mail message when I click on send this message 'some files was not found and could not be attached to the message. You want to send the message anyway? "I am running Windows Vista Home Basic Edition.

  Thank you

  Hello

  Method 1:
  You can perform the steps of troubleshooting from the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:
  You can check if the default e-mail program is selected, follow the steps to do this:
  a. go to: Control Panel and go to default programs. Select Configure programs and Computer Defaults b. Select continues if the permissions window will appear
  c. left, double-click Custom, under Choose a default e-mail program, select Windows Mail.
  d. click Ok and close.

  Method 3:
  If none of the above steps are useful, then try to perform the system restore to the date when it was working fine.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  NOTE: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Method 4:
  If the file you are trying to download is opened, then it will not download, you can close the file completely and then try to download.

   

• Server process could not be started because the configured identity is incorrect (massive failure Windows 7)

  I had worked in Vista x 64 for more than a year and upgraded to Windows 7 x 64 Ultimate a week ago. IT has worked so far and things suddenly got completely screwed up without obvious reason. I'm into the following loop, where I can't go out:

  1. after booting, two minutes is spent with the message "waiting for Group Policy Client" (normal startup takes less than a minute).

  2. once I enter the password, it passes to another two minutes with "Please wait for the user profile Service...". "(normally, the connection is instant)

  3. I'm connected (I am administrator), but a lot of things is false:

  -Without Aero. Single base type GUI Windows 2000 gray

  -Lack of network

  -A bubble message appears in the status bar:
  Unable to connect to a windows service
  Windows could not connect to the service user profile Service.
  This problem prevents standard users to log on the system...

  -Almost nothing works. Attempts to start to explore causes this error message:
  SOLUTION EXPLORER. EXE
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start the Panel of results in the following dialog box:
  Window title: {26ee0668-a00a-44d7-9371-beb064c98683}
  Message:
  {26ee0668-a00a-44d7-9371-beb064c98683}
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start most of the results of Windows programs in the variation of the above two messages

  -Event log is not functional. I am able to start-> Run-> Services and don't start all services of the event log, but it always says "The event log Service is unavailable".

  4. the things I have already tried and that has NOT worked:

  -System Restore to a point a few days ago when everything worked did not help
  -When you log on under different user accounts (administrator or not administrator), I have the same symptoms.
  -Try to re - install Windows 7 from the DVD fails - it says "source is no longer available...". "or something like that

  That did not help.

  In safe mode, the same problem occurred - cannot do anything and get the same error - "...". configured identity is incorrect... ».
  There is no missing or damaged file.

  in any case, thanks for responding.

  I was hoping that Windows 7 would solve the problems of stability of Vista, but I was wrong - things are even worse.
  It was the last straw - I decided to empty Windows and had Ubuntu Linux.

• iTunes could not copy (name of the song) to the iPod (ipod name) because an unknown error occurred (-50)

  Hello
  I use the latest version of iTunes and 160 GB iPod Classic. I create playlist and drag and drop the files there, he begins to synchronize the songs (update files to iPod, copy) but after a few songs, it gives me this error:
  iTunes could not copy (name of the song) to the iPod (ipod name) because an unknown error occurred (-50)
  After clicking 'ok' on the error message, it shows that the iPod got synced up that song (for example songs 2456) but when I try to delete, for example, each piece in the last playlist so I can send all has couse again once I know not where is the last song, it freezes. I can't even click on safely remove the lower right, it does nothing. When I unplug the iPod and reconnect, it shows that the iPod memory is for example 10 gb full couse songs that got synced up to the error, but it shows them as "other". If I wait a few minutes, it automatically deletes and it for example shows 900 MB is full with others. If I wait for each selection to sync, which always occurs within a song at random, but the rest of the songs that I've waited sync appears as usual. But if I try to send new songs, the same error apears after 3-10 songs constantly. But after that I get the error again, the same thing happens in the freezing point. If I restore the iPod and you try to send the songs again he again Gets a thousands of songs, the process repeats...
  I restored my iPod, I did on this topic of error checking. I use no bitrate convertion. Yes, I tried sending the same files after restoring the iPod, no error. Any ideas?
  Thank you!

  I just use CopyTrans Manager to it. Everything went well.

• A few server contacts could not be copied to the address book of tis

  Try to sync Yahoo Contacts (entrance on MacBook Pro, OSX 10.11.6) with the Mac Contacts Contacts/iCloud. On iCloud Contacts, a triangle indicates next to 'Yahoo' with the msg "some contacts server may not be copied in this address book.

  Thread on the similar theme that might be able to help - a few contacts server could not be copied into the address book.

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.