HP ENVY m6-1156ez downgrade WINDOWS 7 - HELP DRIVER not found

Similar Questions

• Webcam driver installed, windows search pilot, driver not found

  I recently changed from windows xp to vista, I bought a new webcam (philips SPC 230NC easy) and installed the accompanying cd. When I plugged the camera that a box appears in the lower right of the screen (install the software) it says not identified found device and promtps get me online software driver, but then can't find. my device hardware ID is USB\VID_093A & PID_262C & REV_0100 & MI_00

  The signature of the said problem as PnPDriver not found.  Also it is sometimes this INF file not found or something, error 409

  What happens on my laptop and desktop, any help much appreciated

  Hello
  
  1 did you encounter any error messages during the installation of the drivers?
  
  Method 1.
  I recommend you to download the drivers from the link below and check.
  http://download.P4C.Philips.com/files/s/spc230nc_00/spc230nc_00_pvt_eng.zip
  
  Method 2.
  If the error persists, remove all the drivers and the software for this device, and then reinstall.
  See the link below on the manufacturer's Web site.
  http://www.P4C.Philips.com/cgi-bin/dcbint/faqview.pl?CTN=SPC230NC%2F00&DCT=QAC&new_tmpl=1&refdisplay=WEBCAM_QAC_61090&refnr=0061090&scy=GB&SLG=Eng
  
  For more information, see the articles below.
  Installing new hardware: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-new-hardware-recommended-links
   
  Demo: Find drivers for your hardware
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-update-your-drivers-automatically
   
  Looking for drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 - hard drive not found

  Hello

  I have a problem with the new Windows 7 and it is that it does not find my hard drive.
  I can see the c partition, but my d partition, where all data is unable to find.

  I checked in administrative tools and I found it but I can't even open my d partition.

  Stand by.
  Have you installed Win7 or you want to install it and can not see the D partition on THIS stage?

• Windows xp help does not start - unmountable boot volume and recovery console work ethier

  Original title: windows xp help does not start and the recovery console will not work ethier

  the symptoms are used to my windows XP boot it says unmountable boot volume, so I tried to fix it via the recovery console as everyone says but every time I enter fixboot for one of my drives hard /i have 3 I think / it won't work and says unidentified boss so I create another boot and exit area and it does not work so I go back and try fixboot again and it says unknown again after the creation of we know. Same mistakes for chkdsk /r and /p never tried / f but I'm guessing that it won't work ethier. It's like my recovery console won't save the changes it brings to all of my discs hard does anyone have an answer to this

  Hello
  • Will there be any changes made before the show?
  • Did you try to start in safe mode?
   
  You can check these links:
   
  Unmountable Boot Volume
  http://support.Microsoft.com/kb/555302
   
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
   
  If above does not work, I would say to contact the manufacturer of your computer.
   

• I can't get into my control panel to change the security settings or anything like that. It says \windows\systems32\rundll32.exe not found. What should I do?

  I can't get into my control panel to change the security settings or anything like that. It says Windows\systems32\rundll32.exe not found.  What should I do?

  Hello

  1. don't you make changes on the computer before this problem?

  Check if the steps of troubleshooting the following article shows you help.
  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

• "C:\ Windows\System32\Nvcpl program not found"

  Since Sam. 7/16, when I cleaned up my hard drive programs, I keep getting this message whenever I open my PC:

  "C:\ Window\System32\Nvcpl program not found "."

  Apparently, by mistake I deleted this program. Don't have any idea how to restore, HELP!

  This message comes to you NVIDIA video driver software that loads whenever your system is restarted.

  It's broken, but you can fix it.

  I suggest you just reinstalling the NVIDIA drivers as follows:

  The best way to reinstall the NVIDIA software is to visit NVIDIA support web page and let your system and recommend the best software for your system or that you get the right version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

  If you have already installed the correct drivers NVIDIA said page, then you should download the drivers anyway and reinstall them yourself.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the link to the support page NVIDIA for the scan:

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

  If following their indications do not straighten things, then follow these steps:

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
   
  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system information summary appears, click Edit, select all, copy and then paste the
  information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information.

  This will minimize back Q & A and eliminate guesswork.

  There will be some personal information (such as the user name and the name of the system), and everything seems to be
  information private for you, just delete pasted information.

  When you have the time, I could do that too:

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• I get thid message RUNDLL C;\windows\momowsi.dll is not found.

  original title: Please help!

  I get thid message RUNDLL C;\windows\momowsi.dll is not found.

  When a Google search for a results file name in no hits or suspicious hits, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run both of these free analysis tools:
  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• Module C:\windows\oyimeteq.dll is not found

  To start my computer displays a box with this:

  Module C:\windows\oyimeteq.dll is not found

  This can be corrected?  I am running Windows XP

  Hello

  References to Vista also apply to just use XP start - run instead of start - search.

  If you still get the error message once you have done a thorough check of the malware and did the
  cleaning as shown in the answer above.

  How to troubleshoot a problem by performing a clean boot in Windows Vista (or XP)
  http://support.Microsoft.com/kb/929135
  How to check and change startup on Vista (or XP) programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Windows 7 - "Entry Point not found" error when trying to play a game

  createAccessible@wxWindowBase@@UAEPAVwxAccessible@@XZ DMC 5 could not be located in the dynamic link library wxmsw28u_core_vc_custom.dll.

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/Windows-7-entry-point-not-found-error-while/3c19d3f0-7667-4989-8bc2-ae807d9ea568

  Hi Patricia,

  Please contact the Microsoft Community.

  Which game you try to play?

  I would have you try and re-install the game and check.

  In addition, I'd like to as you open the prompt in elevated mode and then try and register the DLL by using this command:

  Regsvr32 write the name of the DLL file.

  We know if that helps you.

• I have a Mac and I want to remove the feature "Firefox prevented this site automatically redirecting to another page. Show you how do to Windows, but I have not found how to for Mac

  I have a Mac and I want to remove the feature "Firefox prevented this site automatically redirecting to another page. Show you how do to Windows, but I have not found how to for Mac

  This has happened

  Each time Firefox opened

  == I try to go to page to a new page

  Thanks Cor - el.

• c:\windows\axutunag.dll is not found

  I get this message box when I start my laptop Windows XP 32-bit.  In the message "RUNDLL" box - 'c:\windows\axutunag.dll is not found.  What is the axutunag driver, and how can I fix this error?

  What is the axutunag driver, and how can I fix this error?

  axutunag.dll is not a system component that should be running everything from windows...

  If there is anything that touches on axutunag to system tray boot disable it...
  http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-Windows/
  or

  You can use regedit... Press windows R, type regedit and click ok... (before you edit it, export the key you are going to change or remove)
  then navigate to these paths...

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]

  then look for the .dill file you have described here and delete this key...

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• Code 19: Windows Mobile Device icon not found on my computer

  Original title: Windows Mobile Device icon not found on my computer

  Hello

  I donno why but I can't find the icon of my pocket pc (Hp Ipaq) on my computer, the device is connected (a USB icon on the task bar) but I can not navigate on the device in order to copy data for example, as there is no icon.

  Notice that I can install programs on it (which means that it is recognized by the system), the Sync Center says it has disconnected, mobile windows manager shows that it is too disconnected (sometimes showing Error), but the device itself is to show that it is connected.

  In the Device Manager there is something wrong with the PPC (yellow triangle), it reads: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "(that's french).

  Hi AlgeriaRocks,

  I suggest to uninstall the software completely and try to update the latest version of the HP iPAQ h1900 Pocket PC series.

  For more information see the link:

  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the device in Device Manager

  c. right-click on the device, and then click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  You see the support of HP at following link and try to update the latest version of the drivers.

  HP iPAQ h1900 Pocket PC series-download drivers and software

  For more information, you can also consult the following link:

  Error conditions (performance, beeps, etc.)

  Hope this information is useful.

• Help format/reinstall, HARD drive not found

  Dell Dimension 8400 my brother got a horse of Trojan/bot out there and I had to do a thorough cleaning due to not being able to locate the infection and the internet company kept cutting off the Internet.

  I first tried the start of the disc and using disk relocation provided by Dell. He said "this part of the Setup program prepares Microsoft Windows XP on your computer. To set up Windows XP now, press ENTER. To repair a Win XP... Press R."

  I chose the first option and get the message: "Setup has not found hard disk units installed on your computer." And the only option (F3) is to stop smoking.

  I made a diagnosis of HD and it passes. Looking in the BIOS, it is recognised as disk 0 and also in the startup list.

  I decided that maybe there was a lock on there so I used DBAN to run a DoD wipe/format and clean the drive. So now it has to be completely formatted. I also jumped into a boot disk and performed a fdisk, but he doesn't recognize and create a partition of 8 GB to 160 GB. Hmmm, something's not right.

  Again, I'm trying to reinstall with reinstall drive and a full copy of XP that I have and you still get the "hard drive not found" error.

  The FAQ does not seem to cover this issue, but I could easily looking in the wrong places. in any case, I want to just wipe the drive and reinstall. Any suggestions?

  Message edited by Deboad on 10/25/2008 17:36
  
  

• I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  Look herehttp://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/when-i-access-internet-explorer-a-message-says/25bef4a4-bb01-46ac-bc68-11c81e7b55e7