HP Envy Notebook m6-1125dx: no problems with the HP Envy m6 at 10 Windows upgrade?

Similar Questions

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• I have a problem with the DVD drive not detected on Windows 7.

  I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

  Original title: optical drive not recognized...

  Hello

  Please contact the Microsoft Community.

  You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error message or error code?

  (2) did you have performed the steps in troubleshooting?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I would have you look at the article-

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116#top

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• NOTEBOOK HP 14-am001nk: problem with the drivers for my computer

  Hi, please I have a problem with my laptop HP 14-am001nk, I just bought it with freedos and I installed windows 7, but I really it can't find the drivers anywhere, can you help me on this please? I don't know which material it contains everything I have as information is as follows:

  [personal information]

  PRODUCT NO.: W8Z62EA #BH4

  Thank you

  HP website is having some problems right now. None of us is able to access, manual drivers, etc. for many models. Give it 24 hours and it should be fixed. There is a page of support for your model here, but right now very little on this subject:

  http://support.HP.com/us-en/product/HP-14-notebook-PC-series/10862182/model/12153623/drivers

• Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

  I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

  worm post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  One thing you can try try the system restore, safe mode.

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

  To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

• Dual booting - problem with the disk when trying to start windows

  original title: problems with dual boot.  Windows does not play well with others.

  Hello

  I have Windows Vista Home Premium 64-bit included with the computer.  I installed Fedorah and it works on my computer.  When I installed it, but I had my hard drive partion.  I left most of the hard drive (about 400 concerts) as it was, when I booted up Fedorah worked well and gave me the option to boot or windows.  When I started in the window, however, it wouldn't let me start my computer, it says I have a problem with my drive.  With XP, it gives me no problem, I didn't ignore the disk check, but with Vista for some reason it doesn't let me start.  It gives me a few options of restoration to the previous status confuses the computer he says I manually type in which windows in the command line.  I don't have my windows CD, the only other option that I have that seems to work when I click it is restoring to factory fault which I don't want to do because I don't want to lose all my files.  Please tell me what I need to do.

  http://Fedoraforum.org/

  Fedora forums at the link above.

  A refund Stsrtup of Vista Disk link.

  Download the 64-bit on the right.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the security sysytems update KB3110329 for Windows 7 64 x-based

  Microsoft is aware of this problem with security update KB3110329 for Windows 7 x 64 systems? Have they fixed it? Thanks to John Butler to isolate the problem of configuration updates from January 12, 2016.

  Bill Blair

  Dear Jayant Gupta,

  Thank you for your response. When I tried to install the updates from 12 January 2016 on my Windows 7 computer, I met a problem at the stage where I have to shut down the computer to complete the process. When configuring updates, he remained at 12% for a very long time and then permanently returned to the opening of session and when I checked the history update based on the x 64 updates eleven have been identified as having failed.

  I ran to the resolution of the problems of Windows Update. I did not try to reset the Windows Update components for fear of making things worse. I see at least another user, John Butler, has encountered the same problem and he identified the update of security KB3110329 as the cause of the problem of configuration.

  Later, I downloaded the updates again and hid and then successfully installed their KB3110329 leaving unchecked everything.

  Currently, I have hidden KB3110329 and wait for the opinion of its repair.

  Thank you for your help.

  William Blair

• I have a problem with the touchpad does not not on Windows 7.

  Original title: help. My touchpad scroll has stopped working.

  I have a laptop of Acer Aspire 5750z-4830. Touchpad scrolling does not scroll when I try. How can I put it to the top after that I took it to be repaired? Since I got it home now it won't work. And I don't have the cd to reinstall.

  Hello

  Thanks for posting your question in the Microsoft Community forum. I understand that the touchpad scroll has stopped working.  I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  This problem may occur if there are some differences in the file system or the associated scroll Touchpad drivers. Follow these methods:

  Method 1.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  You can also follow this link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 3.

  Check if control panel touchpad mouse is enabled or not. Follow these steps.

  1 - click on 'start '.

  2 - Select 'Control Panel' click the icon of the '' mouse. '' If you don't see the mouse icon, select Classic view of the control panel.

  Tab 3 - Click the "peripheral" in the window that appears. Select the 'enable '.

  4 button - Click on the 'apply' and select 'OK '.

  Method 4.

  Alternatively, you can also try the following steps.

  1 - Locate the "Fn" button in the lower right or left side of the keyboard of the laptop. The 'Fn' key has different text color on it or the key itself is a different color.

  2 look for the function key (F1-F12) on the top of the keyboard that disables or active the touchpad on the laptop. The key usually has an icon that looks like a touch pad with a finger touch she or a touchpad with a diagonal line through it.

  3 - Press "Fn" both the touchpad function key simultaneously to reactive the touchpad on your laptop. Move your finger on the touch pad to make sure it works. Press to disable the touchpad again at any time.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Problem with the adapter Bluetooth Logitech speakers on Windows 8

  I use Windows 8 Pro, but I had the same problem on the consumer Preview (some things are different now though)

  I use a Dell Inspiron N5010 laptop with a Dell Bluetooth 365 module.

  When I first install the Adapter Bluetooth Logitech speaker it works fine (there is no driver for it but windows installs the driver of basic ad2p). The problem I have is that after the computer sleeps, stops, or restarts the unit is unplugged (as expected) and I can't reconnect (only to remove the device and install again).

  In Windows 8 Preview of consumption when the device is plugged in, I could separate and connect it to the sound settings, but it would vanish from the sound after a sleep settings, reboot or shutdown.

  I could easily connect or disconnect the device by double-clicking its icon in devices and printers in Windows 7. If I do the same thing in Windows 8, an error saying "BTWuiext has stopped working".

  So basically after every sleep, closing or restarting I remove and reinstall the device...

  I also tried troubleshooting of devices and printers, and I checked that Bluetooth Service is running.

  Any help is greatly appreciated! Thank you.

  Hi radufly,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that, after every restart, sleep or a stop, you need to reinstall the drivers for your device. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  radufly, it seems that the device is not compatible with the Windows 8 environment. I recommend you to contact Logitech support http://www.logitech.com/en-us/support/support-contactus and check with them if they came with drivers for Windows 8.

• Oracle Database XE - apex on Windows 7 - the problem with the connection from another computer on Windows 7

  Hello

  I started with Oracle Database 11g, with apex XE, fact the upgrade of the Apex 4.2.6 and to develop a small Application.

  I wanted to connect to my computer (with step of database on this subject) from another computer Windows 7 B.

  So I put Firefox: //A:8080/apex but I have only received a timeout.

  Of course, on both computers there is a firewall of windows running, so I stopped on both systems, the firewall, but it is always the same.

  In Explorer windows running on computer B, I can see data from computer A and both computers are in the same home-net group. (Sorry for my bad English).

  Is there anyone who cann tell me how to get the connection running?

  Maybe I saw the info on this in the textbooks, if it is there, please give me a hint.

  Thank you very much

  William Kastner Salzburg

  Hello

  Check to see if that helps

  https://docs.Oracle.com/CD/E17781_01/install.112/e18803/TOC.htm#XEINW127

  Kind regards

  Jari

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Problem with the Internet connection using IE7 and Windows Vista

  Hi all

  I don't know if I'm in the right forum, but I need someone, help please...

  I just bought a new XPS420 with Windows Vista Home Premium and IE7 already installed.  The 2-3 days, internet worked very well.  Now, whenever I open IE7, I get a message on the connection not found or something like that.  I did some research and some forums suggest to reset IE7 using Tools/Internet Options / Advanced.  It worked... but only temporarily.   After that I turned off my computer and turned back on later in the day, open to the top of IE7, it does not work yet.  If I turn off the modem, it does not.  If I do a reset, as shown above, it would work again.

  I finally called AT & T Tech support, but they could not diagnose the problem.  While we were on the phone and try to open and close IE7, and that is, I logged.  Then to test, I turned off the computer and turned it back on and of course, internet Explorer did not work.  The AT & T guy me open system information to check the properties of the network and all said that "this device works correctly.   He also suggested to disable my anti-virus program (I have preinstalled MacAfee), which I was very reluctant to do. So before you disable MacAfee, I tried IE and it worked, so I was happy.  I closed the browser and open it again and it worked; turned off the computer and turned it back and the browser did not work.  I already lost count how many times I had to do that!   When I click on diagnose the problem, I got a message on xxx.xxx.x.xx DNS. do not answer, as the server ping the remote host, but does not got a response.  On hearing this, the representative said that it must have something to do with Vista and that perhaps the OS has not been installed correctly and he suggested that I contact the place where I bought my computer and ask them to reinstall.

  He also asked me to install Firefox as an alternative.  When I did, it worked.  But IE7... at the time.  I could not afford to shut down my computer once again because I was already late to work, but I guess I'll find out later. But maybe I have to use Firefox if IE does not work.  I have not really tested who. Is the thing with Firefox, it is not compatible with our applications work as well as web pages, I am trying to access (I tried one before I left) a work t look the same and difficult to navigate. And it shows "protect on" on the lower right of the browser that performs the same way, he shows up on IE.

  Sorry for the long post, but I also need to evacuate.  The resolution could really be as simple as turn off the anti-virus?  But then, how to get us protected?

  Help, please!  I'm so desperate for a solution.  My mother also uses this computer to access its work files.

  Thank you
  Remms

  
  

• Problems with the receipt of a copy of Windows Vista

  They gave me a free Express Upgrade to Windows Vista when I bought my laptop.

  I him have not yet received after 8 weeks of waiting.

  Is anyone else having the same problem or I am one of the few unlucky? Any help would be appreciated.

  So why you didn t call your local dealer where you bought your machine? Or called microsoft?

  If I were you, I'll go to my dealer and say certain things. :)

  Welcome them

• I have a problem with the printer works is not on Windows 8.

  Original title: device

  my printer has stop working.  Convenience store tells me that the coils do not work.  How can I solve them?

  I suggest you to uninstall the printer and install the latest printer driver for the printer model you are using.

  I see an error message about "spooler" problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

  To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

  To restart the print spooler service

  1. You must be logged on as administrator to perform these steps.

  2. Press Windows key + R
     Type: services.msc
     Press enter on your keyboard

  3. Right click on the print spooler service, and then click Properties.

  4. On the general tab, next to startup type, make sure that automatic is selected.

  5. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• Problem with the installation of photosuite (solution Center) windows 7

  Hello

  I have a new computer windows 7 64 bit laptop and lost the installation for my printer disc. (HP Photosmart C4180)

  I downloaded the necessary drivers etc HP which at first seemed to succeed only to find at the end of the installation, that should be deleted photosuite. (It could be called HP Solution Center) I need to be able to use the scanner.

  Someone at - it ideas?

  Concerning

  Sharon

  Hi sharon_love,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-74950-2&CC=US&DLC=en&LC=en&os=4063&Product=1141647&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?