HP ENVY printer 4512: unable to scan to the chromebook using hp ENVY 4512?

Similar Questions

• HP3070 b611all in a printer: HP3070 unable to scan from the printer control panel

  Hello

  Although I can scan a document from my laptop I can't do it from the printer control panel.

  I tried following the instructions in the Support Center
  "HP Deskjet 3070 e - all-in - One Printer Series - how Scan: from the control panel" but I didn't know where I could: ' activate the scan to the computer connection (Windows only).

  Anywhere there is no mention of "Scan" under settings B3070 only in a separate file, HP Scan on my system...

  Thanks for your help so far.  I now have much more HP files/programs that I started with.  What can delete and to be able to continue to print wireless & scan of the computer, or maybe I should ask what files do I need and I can uninstall.

  I ordered the following cable to establish a connection between my laptop and a printer?  I hope it is the right one.

  USB printer cable lead for HP Hewlett Packard and Lexmark A - B

• Unable to connect to the internet using Firefox or IE

  Unable to connect to the internet using Firefox or IE. I can ping other pc on my network home and can ping websites such as google.com. Other PCs on the home network connect without problems. Nothing has changed in the network or the configuration of IE/Firefox. The only change is that I have installed the update to Vista SP1

  Hello

  Stack TCP/IP Winsock settings in Vista has probably been corrupted.

  Journal to this page and scroll down, there are instructions for Vista.

  http://support.Microsoft.com/kb/811259

  Jack, MVP-Networking. EZLAN.NET

• RCU error: unable to connect to the database using the contact information provided

  Hello

  I am not able to connect to the database using the remote control 11.1.1.10.1 to create patterns. I ran the UCR even a week ago and I managed to connect. My database and listener are up and running and the host and the credentials are correct. I don't know where is the problem. Any help will be appreciated. Attaching the screenshot for reference.

  

  Concerning

  Oumaima

  Hi Handal

  Thanks for the reply. Looks like someone had blocked the firewall settings, so I was unable to connect to the database using the port.

  Thank you

  Oumaima

• Touchsmart600 HP: hp printer is unable to scan to hp touchsmart, lost connection

  I recently bought and successfully connected a new printer HP Photosmart6520, all functions worked fine including my HP Touch Smart scan, but recently, I have been unable to scan to my PC. I can scan my Acer laptop without problem so I know printer works properly. Need advice on how to fix... Thanks Mick

  (Personal information by moderator)

  Hello @mickyar,

  Welcome to the Forums of HP Support!

  I understand that you are having problems when you try to scan from your computer Windows 7 to your HP Photosmart 6520 e-all-in-one printer. I would like to help you today with this problem of scan. Now, because you are able to scan to portable, we know him problem that you are experiencing are not caused by the printer or the connection. Rather, there may be some kind of driver or software conflict occurring on your Windows 7 computer that is the origin of your scans to fail.

  To begin troubleshooting can I please have you click here to download HP Print and scan of the doctor tool. Once you select the link, only the installer so that the tool will start automatically. If you have the ability to run please click Run. Depending on your internet browser, you can only have the option to backup. If you save just click Save. Once the download is complete, please select the download package and click on Run to launch the tool. Please cross the HP printing and analysis tool of the doctor to "thedifficulty of analysis." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test scan again to see if the problem is resolved. If you see errors in the analysis of the doctor tool please take note of them that I will need to know exactly what is happening.

  Please reply to this message with the result of the execution of the HP print and the tool of analysis of the doctor. I look forward to hear from you!

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• Unable to scan and save files using Laserjet M1136

  Hello

  I've just installed and started using the M1136. While the printer and copy function work very well (a scanned doc immediately is printed), I am unable to scan and save a document on my system.

  Everything I read on the forums, I'm supposed to find a Director of HP /Scan To program/service that will help me to scan and save files, but I can't go to their source as well.

  Advice / help will be greatly appreciated!

  Hi M_Mand,

  Thank you for providing me with this information that you still can't find any software of HP on the computer.

  You can also scan using paint on your computer. Go to start, all programs, accessories, paint.

  I have provided with the URL of download and installation of the complete functionality for the printer software. This will allow you to browse the HP software.

  HP LaserJet Pro M1136 multifunctional printer drivers.

  Select your operating system, click Next and click on the software to download and install.

  If you have any questions or issues, feel free to ask.

  Thank you.

• HP C7280 All in One printer: HP Scan of the error using HP C7280 all-in-one printer

  I was scanning documents successfully until recently.  I use a Mac with OS X 10.7.5 and receive the following error message when you use HP Scan.

  Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.

  -Restart the program.

  -Close all programs that might be using the device.

  -Restart the computer.

  I tried to download several drivers without success.

  Any help would be greatly appreciated.

  Hello @kellycc,

  Welcome to the Forums of HP Support! I see when you try to scan with your HP Photosmart C7280 with your Mac running the 10.7 operating system, you get an error "cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.'.

  Complete the following steps:

  Scrub / uninstall

  • Open the Applications folder > folder HP or Hewlett Packard > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers. Hold down the command, Option , and command, while now the three buttons.
  • Click on Uninstall.

  Reset the printing system

  1. click on the Apple icon ( ), then click on System Preferences.

  2. in the hardware section, click Print & Fax/scanning. The Print & Fax/scanning dialog box opens.

  3. make a right click (or Ctrl + click) in the left panel and then click on reset printing system...

  4. click on OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol...

  Repair disk permissions

  1. on the Dock, click Applications, then utilities.

  2. double-click click disk utility.

  3. highlight your hard drive / partition on the left (by default this is "Macintosh HD").

  4. click on the button to repair disk permissions at the bottom of the window.

  5. once the repair is complete, restart the computer.

  Restart the printer. Now, you will need to install the printer driver using the Apple updates. Click on the link below and follow the instructions on the screen:

  Installation of your printer driver HP and software for Mac OS X

  I hope this helps, please let me know the result!

  Thank you

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• I can print but does not scan because the printer is not recognized

  Hello

  Like the others. I have a HPDeskjet 1050 of J410 all-in-One printer. He is an all-in-one printer that has printing, copying and scanning. I tried to install its software device driver. However, recently, I found to do the scan function, the result?, windows fax and scan said that are without a scanner connected everytime I try to scan. It's very surprising because the print from the computer very well. I tried a different USB port, no change. Please someone help me with this problem quickly because I need to analyze a large number of documents for my school work.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems with the scanner.

  This could be due to hardware conflicts.

  Try the methods.

  Method 1:

  You can use try scanner installation by manually adding in devices and printers and check if this can help, solve you the problem.

  To add the device manually, follow the steps below:

  1. Click Start and click on Control Panel.

  2. Select display large icons.

  3. Select the devices and printers.

  4. click Add a device and follow the instructions to install the scanner.

  Method 2:

  I suggest to run the tool and troubleshooting hardware devices and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Windows Fax and Scan - what the appropriate use for the concurrent users to save to the network program?

  I'll try to keep this simple - as I already asked this on other forums without the answer. My environment - Windows 7 Enterprise SP1 32-bit client machines. A computer needs to scan patient documents to a network shared by a group of users folder. There will be many people who use this computer even through all day (several shifts - environment 24 hours/7 days).  This is why I need multiple profiles from windows to all save the scan to the SAME network location.

  Currently I am trying to achieve with Windows Fax and Scan and using the ' Scan 'option under 'tools' routing. "  There is a check box (once in this option) for "network location".  I am using this option, but its does not work and that's the whole problem. Its supposed to AUTOMATICALLY record each scan to the specified network location, but it does no such thing. The scan is not registered at all in fact it is just in the interface user of Windows Fax and Scan... double you click it, and then it shows you the image.

  Some information note for helping people answer this question (and any help is appreciated):

  (1) * YES * the network folder, I am trying to record is a valid network folder and * IS * accessible via my network of different devices

  (2) * YES * the user of this journal on the computer with the scanner * ALL * read/write to have rights to this location of the network folder

  (3) * file YES and printing sharing is already active on clients

  If you please if someone either knows how to solve this problem, or at this stage if you can even suggest a different (cheaper the better) application that will scan to a network location please let me know.

  One might think to a disabled feature labeled as "scan routing" and then a field for "network location", it would be simple as plugging in the network folder and checking a box - apparently it isn't.

  Thank you.

  Tom Salvtti

  Hi Tom,

  Thanks for posting your query on the Microsoft Community.

  I would like to know some information.

  1. You are connected to a domain network?

  If Yes, then I suggest you to post your query on TechNet Forums as we have experts working on such issues and help you to the best.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

  Hi all

  I had a very big problem with my card.
  I can t connect to the internet.
  I searched the forum but without any determination :(

  I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
  Someone said too
  "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it redétecte this new")

  How to disable the modem?
  And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
  I put t even know that :(

  Help me

  Hello

  The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
  LAN driver can be found on the page of Realtek.

  You ask how to disable the modem? I think you mean how to reset modem DSL
  Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

  If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

  Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

  All that s

• Record scanning to the desktop using mac OS 10.9

  I just want to thank the HP employee who provided instructions on how save the scan on the desktop without getting a gray image or black all.

  Using Preview to sweep around the problem of loss of image when registering.

• Unable to connect to the internet using a Wi - Fi connection

  original title: wireless connection problem

  My son can connect to the internet with his phone and the ps3, but no more with his laptop

  He was able to connect before on laptop. No matter what he tries, he can't re - connect his laptop to the internet... It has windows 7
  Thank you

  Hi mikecampbell,

  If you are still unable to connect to the internet with a wireless and wired connection, make sure first that the wireless card is turned on. On most laptops, there is a button in the front of the laptop. If you are still unable to connect to the internet, follow the steps described in this document.

• Unable to scan to the computer of my 6700 Officejet premium

  Hello

  I have a new Officejet 6700 premium it's connected wireless to my hub.

  I have two computers attached to it, my work computer XP and my computer running Windows 7. All functions work perfectly on my work computer, but I can't get the scan function to work on my computer at home. I constantly continues to receive the Unreachable error message scanner "to scan communication cannot be established.

  I lived all the diagnostic tests, doctor scanning HP finds two errors

  • Windows WIA Scan
  • HP Twain scanning

  but offers no advice other than to restart everything (that I have MANY times).

  I disabled all my firewall and re-installed all the HP software and drivers.

  I'm now at the stage where I'm about to resume and get another product, unless someone can help me.

  Thank you

  Hello world

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
  
  I would like to know what are the errors you receive?
  
  http://www.HP.com/go/tools