HP Envy: The sound of my laptop got soft/quiet

Sounds Windows 10 HP Envy my laptop got very soft and I could barely hear anything. It was't like that yesterday, I already tried to disable the audio improvements and nothing happened. Help, please!

Hello

Try the following.

Download the Realtek HD Audio Installer on the link below and save it in your downloads folder.

http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72117.exe

When finished, press and hold the Windows key and press R

In the run window, type devmgmt.msc and press to enter.

In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

When you are finished, download and reinstall the Chipset driver at the following link.

http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72105.exe

When the reinstallation of Chipset is finished, stop the laptop.

Disconnect the power adapter.  Hold button power supply for 20 seconds, then release it.  Reinsert the battery and plug in the AC adapter.

Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • How can I turn the sound on my laptop

    the little yellow light on the top of the computer stays on and I can't turn it off

    Hello

    ·         What is the brand and model of the laptop?

    ·         You are able to hear the sound from external speakers or headphones?

    ·         Were there recent changes made on the computer before the show?

    Check the laptop manual or contact manufacturer support site if you are not able to turn on the sound on your laptop.

    Follow these steps and check if that helps:

    Step 1:

    Although most speakers have a volume control, you can control the overall level of sound using Windows.

    Adjust the speaker volume

    http://Windows.Microsoft.com/en-us/Windows-Vista/adjust-the-speaker-volume

    Step 2:

    Follow the shape of measures troubleshooting section if you are confronted with his number on the computer and check if it helps.

     

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • The sound in my laptop is off even the volume is at the maximum level

    Hello. Good Eve. I just need help. The sound on my laptop will not work. I have to update the driver, whenever I used it, and after a minute, it will produce its new. I really need help to solve this problem! Thank you!

    I recommend first of all check the Panel of office for updates.  Some of these must be installed prior to 8.1 will update correctly in all cases.

    1. Click the button start (bottom left) and choose Control Panel
    2. Click system and security, and then choose 'Find updates' in the Windows Update section
    3. After they are all installed and restart you, check again because some must be installed before others are offered
    4. Open the app Store and download the 8.1 update if you work with all the latest patches and updates

    If it still does not respond, someone mentioned that they had some success by pressing Ctrl-Shift-Escape, then disabling items on the tab startup (especially those related to the sound).

  • Pavilion g4: can not hear the sound of my laptop

    I can't hear from the laptop. When I try to test the sound he says not to test tone. I think I got g4, but I know it's the Pavilion g series

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59154.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52791.exe

    Once the relocation of Chipset is complete, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • How to get the sound on my laptop

    Hi Paul, I have the same problem on my DV2700TV Windows Pro 64-bit 10. There are two listed hardware ID. An id seems to be complete while the 2nd id is a part of the identification. I don't know how to remove this partial code. I think that this is the reason why I have no sound from my speakers by default. In addition, my system came with a digital HDMI connection. It seems that all the sound is routed to the digital connection, even if the speakers are set by default. I have tried everything I know and the recommendations of this site, but no joy. I hope you can help.

    Plenty of ID = HDAUDIO\FUNC_14F1 & DEV_5051 & SUBSYS_103C30CD$ REV_1000

    Partial ID = HDAUDIO\FUNC_14F1 & DEV_5051 & SUBSYS_103C30CD

    In addition, I updated the driver and now the identifiers are:

    HDAUDIO\FUNC_01VEN_14F1 & DEV_5051 & SUBSYS_103C30CD & REV_1000

    HDAUDIO\FUNC_01VEN_14F1 & DEV_5051 & SUBSYS_103C30CD

    I tried everything you say, but still no joy. Attempt of reaction to update the driver, a dialog box States that the best driver is already installed. I ran the resolution of problems and he couldn't identify the problem.

    Well Paul, I made sure I have the latest drivers installed, just click the sound icon in the taskbar and opens "playback devices". I selected "Speakers" as the default device selected then the device properties I selected the 'Advanced' tab and selected to any quality format that recognizes the soundcard. I chose 16 bit, 41000Hz. I clicked on apply and then chose the "improvements" tab and put a tick in 'Disable all improvements' and click apply then OK to close the dialog box that brought me to 'Read' settings I clicked on 'Configure' and click on the test button and guess what... I got better I got front and sound. No scratching noise. More funny thing is, I went back to the Advanced tab in the properties, and the default format has been set at 24 bit, 48000 Hz... so better sound quality.

    I think I made this a thousand times over several months, uninstalling and reinstalling drivers with no joy. Maybe it has something to do with the order, in that I did... I don't know but I'm a happy camper. Thanks for your help and your patience.

  • How can I make the sound on my laptop cuts a stop?

    whenever I was listening to spotify, watch a video on youtube and online movies, the sound would be always stopped at halfway. I tried to use the sound problem

    Shot several times and check the sound properties and they always say that the speakers on my laptop work properly. my laptop from the fact

    for the last couple of days and it drives me crazy. Please give me some steps to resolve this problem before I resort to have a TI repair specialist

    It would be very useful for me. Thank you.

    Hello Lauren,

    1. What is the brand and model of the laptop?

    2. which version of the Windows operating system is installed on the computer?

    3. Since when are you facing the issue?

    4. what browser do you use?

    5. is specific to hear when you're online?

    6 did you a recent software or changes to the material on the computer?

    If you are using Windows 7, you can follow the steps from the link and check.

    Tips for solving common audio problems

    http://Windows.Microsoft.com/is-is/Windows7/tips-for-fixing-common-sound-problems

    Hope this helps and provide us more information if you need more assistance.

  • Where can I fix the sound on my laptop?

    I can't get sound on my laptop. It is available only when plug us in headphones. What should I do to remedy this situation.

    Hi ToneML,

    Access your computer's BIOS and make sure that all the audio settings are enabled. How to access the BIOS depends on the manufacturer of your computer; However, the most common way to access the BIOS is to press F1 immediately after starting the computer.

    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk

  • Pavilion dv2000: how to have the sound on my laptop

    Hi, hope someone is able to help me please. I have a HP Pavilion dv2000 laptop and have downloaded Windows 10. Since then, I've lost all sound. Have done everything to my computer, HP and other Councils site Web, I still have no sound. I even turned off all the speakers etc. rebooted the computer and re-abled pregnant again - still doesn't work do not. I'd love to hear again the videos etc and some of my work is that I find it extremely frustrating. Thank you very much.

    Ok.

    The reason why the driver was not installed was because the folder of Hermosa has different hardware ID than the one you posted.

    The hardware ID you have posted is in the folder of Venice, a so go through the same steps again but this time browse to:

    C:\SWSetup\sp40270\Venice\V64\wisVenya and select the Conexant HD Audio device in the list and see if the driver is now installed.

    Then restart.

  • can someone tell me how to change the quality of the sound on my laptop Toshiba Windows 8? Thank you

    Can someone tell me how to change the quality instllation on my laptop Toshiba Windows 8?  Thank you

    I would say more in the direction of http://forums.toshiba.com/ and asking your question related to Toshiba.

  • Cannot switch the sound on my laptop?

    Screen message "audio is not

    @ eagle-1

    Have you installed your audio driver software on it?
    You can go to audio playback problems resolution to this problem. Try this link:
    ==========================================================================
    And what is your name of sound driver model?
    I hope you this help.
    BillyRazOr
  • The sound on my laptop has suddenly stopped working, no devices are listed in the list of output and the volume bar and mute button are locked on mute

    Try turning off your computer and pressing Command + Option + P + R as soon as you restart your computer.

  • I plug in a headset. but the sound on laptop

    N I connect the headset to my cell phone, I can hear sound on my headset. but the sound of my laptop is still there too. How do I solve this problem

    Hi Mohd,

    -What version of Windows is installed on your computer?

    I suggest you go through the steps mentioned by Arya S Asok in Forum Microsoft following link and check if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/sound-from-built-in-Laptop-speakers-while/282eb17d-843f-4c33-88bf-34e5574cb766

    Note: The steps mentioned in the link above are applicable to Windows 7

    It will be useful.

  • I have dv4 1240 TX. my laptop was made mute. the sound is not coming.

    the sound in my laptop is not.

    Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

    Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • How to reset the quality of the sound on laptop

    original title: sound quality

    I accidentally changed the quality of the sound on my laptop and when people speak or sing it is very rich in slope as if they were on helium.look forward to some tips on what I did wrong and how I can fix it, soon...

    Hello

    Welcome to the Microsoft community.

    It seems that you are facing problems with the sound, we are here for you help. Follow these methods to solve the problem:

    Method 1:

    See the article and check if that helps:

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    Method 2:

    I suggest you to return the item and check if it works.

    Adjust the sound level on your computer

    http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

    I hope this helps. Let us know if you need more assistance.

  • No sound on my laptop

    The sound of my laptop (HP Pavilion series 7g) Windows 7 went all of a sudden and I don't know how to fix... I try any (Manager of device, mixer and other things) but nothing... The strange thing is that when I put my headphones the sound is ok... No idea what to do?

    Thank you

    E..

    Hi e..,.

    I see that you are getting sound but not your built-in speakers. Please correct me if I am misunderstanding.

    I'd love to help you, but it would be better to get the full product number and the version of the OS. Please see the following documents if you need help to find those.
    How can I find my model number or product number?
    Is the Version of Windows on my computer 32-bit or 64-bit?

    A good starting point:
    No sound from speakers (Windows 7)
    HP Notebook PC - fix no sound or Audio problems in Windows 7

    Are there messages error, warning signs or other indicators displayed anywhere on your computer?

    Please let me know if this helped, or if you need additional assistance.

    Also, here is a series of videos I found on youtube, which cover a wide range of audio problems. All apply, but they are also presented in a fun way.

    Fixing Sound from your PC - part 1: select the right speakers
    Fixing Sound from your PC - part 2: verification of connections and Volume controls
    Fixing Sound from your PC - part 3: quick fix in Windows Vista
    Fixing Sound from your PC - part 4: implementation of Digital Sound
    Fixing Sound from your PC - part 5: find and install the Audio drivers
    Fixing Sound from your PC - part 6: update Codecs

    Kind regards

Maybe you are looking for

  • Problem with S3 organizer

    I have a problem accessing my Amazon S3 account. I get this message every time I try to open a session..."The difference between the duration of the request and at the present time is too large"

  • Zoom office.  Help, please.

    I connected my laptop to my TV via a HDMI cable earlier today.  When I did the two screens froze.  I unplugged the cord from my laptop, but the laptop screen was still frozen.  I tried to see if it would help, but he stayed on when I did close.  I di

  • Error 1706, impossible to find LENGTH 8.2.1

    I recently started getting an error that my TERM 8.2.1 must be configured, whenever I try to load labview (1nd 2010 now 2011) 1706 error is because I don't not/can not install 8.2.1.  Not sure it's the code for myruntime question. Here is the chronol

  • Power-On Password for an HP Compacq nc8430

    The exact message is Power-On Password and a symbol of a key. I try to erase this message from Power-On Password on a HP nc8430 Compacq.  Research, however, this forum and on the Internet, all the tout le monde world mentioned that I should remove th

  • Error "E_ACT_NOT-READY" on my Mac, newly purchased, but I'cant turn off my Adobe always identification code: try again another time.

    On my newly purchased Mac, I can't download E-Books. Still: Error "E_ACT_NOT_READY." But when I try to turn off my Adobe ID (under 'Help', it is not possible. It's always the solution: try again later. ?????