HP ENVY Ultrabook 4-1130us - how to access Raid management screen?

Similar Questions

• How to access the management of VLANs with a different virtual LAN (Dell powerconnect 6224)

  Hello

  DELL powerconnect 6224 reference.

  I want to access the management of a different VIRTUAL LAN VLAN.

  The management of VLANS is 100 of VLAN. not the routing

  My computer is vlan 60 (192.168.60.10) and I want to connect via ssh or http (192.168.100.1) to manage my switch.

  Thank you for your help on the command line

  The management of VLANS on the 6224 is not routable. So, you will not be able to access VLAN 100 from any other VLAN. However, you can manage the switch from other VLAN IP addresses. So if VLAN 60 has an IP of 192.168.60.1 you can http and ssh to it. And if the VLAN routing is enabled you have access to 192.168.60.1 on the other VLAN.

  See you soon

• PowerConnect 2724 - how to access the managed mode

  I have a Dell Power Connect 2724 performer in our network. Since that it has been installed, it has failed but I would now add the ability to manage and configure remotely... especially so that I can activate a GigE at our NAS bundle

  When I look at the switch I see MANAGED light is on but in this case how would I connect to manage it?

  I see references to a default address 192.168.2.1 but that IP does not exist in our network domestic

  All addresses of our home network are the DHCP pool given by our router from Virgin Media and are in the range of 192.168.0/24 so what should I do to access the port of the DELL printer management please?

  When you have had access for the first time were all changed settings? You can try to disable any browser addons, cookies, clear cache, etc. Then try again.

• How to access human management task using TaskQueryService?

  Hello
  
  I want to access human task payload programmaticall attributes from a java application customized using TaskQueryService.
  Could you please share some snippet on how to do it?
  I have a task of string parameter named param1 which I want to access.
  
  Kind regards
  Sam

  Hello:

  Take a look at this post: http://beatechnologies.wordpress.com/2011/08/24/

  Also here is the Oracle Doc: http://docs.oracle.com/cd/E12839_01/apirefs.1111/e10660/oracle/bpel/services/workflow/query/ITaskQueryService.html

  and:

  http://docs.Oracle.com/CD/E17904_01/integration.1111/e10224/bp_worklistcust.htm#BHAHBHID

  I hope this helps.
  The best
  Rolando

• How to access the managed bean taskflow action result?

  Hi all
  I have a requirement where I have two areas of text (username and password) and a SignIn button. When the user clicks login, my action managed bean will run the view object and get the password for this user name. And that's why it will compare the password presented by the user and the password came from the view object. I a taskflow, in which I have two points of view, we're signIn page and other is the home page, and the result of the action is successful.
  The managed bean method here signIn Page for SignIn button.
  
  public String execute() {}
  String EnteredPassword = PassEncrypt();
  ApplicationModule am = ADFUtils.getApplicationModuleForDataControl ("AppModuleDataControl");
  ViewObject myView1 = am.findViewObject("LogindetailsView1");
  System.out.println ("Usrname is" + this.) (Username);
  myView1.setNamedWhereClauseParam ("v_Username", this.) (Username);
  myView1.executeQuery ();
  DCBindingContainer links =
  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
  DCIteratorBinding empIter = bindings.findIteratorBinding("LogindetailsView1Iterator");
  String DBPassword = empIter.getCurrentRow ().getAttribute("Password").toString ();
  
  System.out.println ("password is" + DBPassword);
  
  {if (EnteredPassword.Equals (dbpassword))}
  
  Here, I need to call the result of success, which will allow the user to get access to the display of the home page in taskflow.
  
  }
  else {}
  FacesMessage fm =
  new FacesMessage (FacesMessage.SEVERITY_ERROR, "Please check your name of user and password",
  "Please check your name of user and password");
  FacesContext.getCurrentInstance () .addMessage (null, fm);
  }
  Returns a null value.
  }
  
  If this can be done using the method call in taskflow then how could use it in my script?
  Please suggest.
  Thank you.

  you have a rule of navigation between these two pages
  If so, simply return the navigation rule name

  if(EnteredPassword.equals(DBPassword)) {
  return "success";
  }
  

• How to access Enterprise manager from another computer

  Hello
  
  I have Oracle 10g installed on a PC. I can access this PC EM.
  I would like to know how to acceding Dbconsole EM from another computer on the same local network.
  
  Thank you
  
  RAF

  user1749272 wrote:
  Only, I solved the problem. It's the firewall blocks. Added the port 1158, then it worked.

  then, please provide 'useful' or 'correct' points as appropriate and mark it as "answered".

• How can access Windows Management Instrumentation Win32_Processor and Win32_OperatingSystem to re-enable the functionality of WMI and other features such as system information?

  Running Windows Home Premium SP2.

  I stumbled upon the answer to

  http://social.msdn.Microsoft.com/forums/en-us/SQLExpress/thread/b924e835-b835-4883-8323-8b3600dfb0c1/

  of greggnlisa.

  -Goto the start menu and LOCATE your command prompt (should be under the accessories section).
  -Right-click on it and select "Run as Administrator".
  -At the command prompt, type the following: net localgroup "Directors" "NT Authority\Service" / Add

  -Then press ENTER.

  -Reboot and you're done.

  I do not understand how it worked, but it took me several weeks to locate.

• Need to access the BIOS screens

  "HP Pavilion p7-1447 c desktop PC Win8x64.  FN2 gives me the diagnosis UEFI screens.  I need to enter the BIOS to set the NumLock on at all times.  How to access the BIOS screen?

  Hello

  Turn on and immediately press the ESC key to access the select start--> F10 menu to access the BIOS.

  Best regards

  ERICO

• Want 4-1130US access Intel RAID Manager from the BIOS or screen of the Advanced BIOS setting?

  I just got the ultrabook of 4-1130us envy.  I need to access the screen of the Manager RAID Intel and advanced the BIOS configuration screen.

  By pressing "Esc" at startup until gives me only ordinary BIOS screen, and many options are all grey that I can't change.  How to access these screens?

  Thank you

  Thank you

• HP Envy Ultrabook 4-1112TX: start the device not found

  Hi, the water had spilled on my laptop when it is turned off and disconnect with fees. After I try to dry it in the Sun after it dries I try to turn it on. But I saw this post about it not found 'Boot device. Please install an operating system on your hard drive. "HDD (3fo) F2 diagnostics system for more information, please visit:www.hp.com/go/techcenter/startup '. I just want to know if the laptop is really damaged or not my laptop is the hp envy ultrabook 4-1112TX

  peggyups

  Sorry to be the bearer of bad news, but any TIME you spill water on your laptop, it will do SOME damage ‑‑ the only question is, how much!

  You can work through the details in this thread to see if something helps you: you just spilled water or coffee on your laptop - what you need to do here is

  You should also try the steps in this thread to see if the hard drive has failed: test a hard drive in the BIOS. HP® customer support

  If nothing helps, your only recourse is to take the laptop to HP Service Center where they can disassemble, assess the damage and see what is involved in repairing it. Here is information on Service Centers: HP Notebook PC - use a repair center certified HP to repair a laptop | HP® customer support

  Good luck

  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the symbol of the thumbs-up to the left of the answer key to say thank you.
  If my message solved your problem please click on "Accept as Solution" - to help others to find the solution.
  ========================================================================

• HP envy ultrabook cl 4-1043: flashing screen laptop computer

  This problem started a few days ago.  Whenever I try to turn on my hp envy ultrabook, it is not completely up.  It doesn't give me a flashing blue screen.  Anyone know what could be the problem?

  @beto84 ,

  Hello and thanks for the display on the HP support forums. So that I can better you help with your problem could you please post back with your product number.  Please provide the model number however the number of product be useful for accurate documentation of your system.

  How can I find my model number or product number?

  Thanks again for posting and I would like to hear from you soon.

  Have a great day.

• HP Envy Ultrabook 4-1101ea upgrade to SSD

  Product name: HP Envy Ultrabook 4-1101ea

  (http://h10025.www1.hp.com/ewfrf/wc/product?product=5311077&lc=en&cc=uk&dlc=en&lang=en&cc=uk)

  OS: Win8 64bits

  So recently my laptop has had a dead HARD drive, and because my warranty is no longer active, patients have to pay to replace. So, I decided I may as well remove the HARD drive and get a SSD to replace the main drive.

  The only problem I have is that I never recived one Win8 disc, it came pre-installed on the laptop (no CD drive). If I had to get a new drive, how would I go about moving on my windows install? (Really want to buy a second copy for the laptop) Is it still possible?

  Of course cancel the guarantee is not something that is particularly important to me, and exchanging components of PC is nothing new to me, however Exchange disk main hard of a computer with a copy of windows that I don't want to lose is something I've ever done. If all the advice, specifically related to windows issue, would be greatly appreciated.

  Hello:

  The W8 product key is encrypted in the BIOS.

  Download this ISO OEM W8 file and use it to install W8.  He will work with the product key in the BIOS.

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Then use this tool to make the file ISO bootable on a key USB 4 GB or DVD.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• How to access my iPhone music on my iMac?

  How to access my iPhone music to my iMac?

  If you ask how to move music from your Mac to your iPhone, you use iTunes for this. Apple can explain this better in moving content to iTunes on your computer to your iPhone, iPad or iPod touch - Apple Support

• How to access iTunes game library on a computer without iTunes

  There used to be a way to access my iTunes online library. I have access to iCloud Drive and I have iTunes game, but I can't understand how to access my library on a computer where I can not download iTunes. My understanding is that it was the goal to Match iTunes, so I feel like I'm missing something.

  Hello

  What kind of computer you have and what operating system?

  Jim

• How to access my voicemail from another phone?

  My Iphone is stuck in reboot mode (the logo remains on the screen) and when I connected to itunes and tried the update, I got error message 4013, saying that it cannot be updated and I need to restore. Is there another way to fix it without having to restore and lose all my data?

  You have asked two different questions here. If you receive an error 4013, then take a look at this document of support for the troubleshooting steps.  If you see the 9-4005, 4013, 4014 error when you restore your device iOS - Apple Support

  With regard to access to your voicemail from another phone, you must talk to your cellular operator and know how to access voicemail from another phone. They control the voice mail and would be able to explain their procedures, if you don't find anything on their website. It usually requires that call you your phone number, then press a series of buttons to enter your password to enter the voicemail server.