HP ENVY Ultrabook 6-1106tx: USB - IF xHCI USB Host Controller problem
Dear Sir
I hope you will be fine. My name is Rana Imran and I use HP ENVY Ultrabook 6-1106tx with Windows 8.1.
I think I have the USB - IF xHCI USB Host Controller driver problem. I send you pictures of the problem. Please solve this problem.
Thank you
Hello
The first suggestion I want to do is to download and reinstall the switchable graphics driver on the following link as it lists a fix for WIDI.
When reinstalling com [full, restart the laptop.]
If you find that this did not correct the problem, try the download from Intel on the link below.
https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23861&lang=eng&ProdId=3227
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
USB-IF xHCI USB Host Controller problem
I am using Asus UX32VD and there is a problem: USB - if xHCI USB Host Controller is not working properly. I tried updating the driver from the Device Manager, but the problem persists after that it has been updated.
Seen a few threads on the site but I don't know if the solution is the same throughout the of...
Thank you
Hello
Try this and let us know if you are still having a problem.
Use this link and run the Intel Driver Update utility
B Eddie
-
DRIVER_POWER_STATE_FAILURE & USB - IF xHCI USB host controller problems
Greetings,
Recently I've known APC with pilot failure current state every time I try to turn it on or reactivate my new Zenbook from ASUS. It takes forever so she actually turn on which is also a new problem. I tried to run a Windows troubleshooting from the center of the action and he said that there is a problem with the USB - IF xHC USB HOst Controller driver. He recommends that I re - install this driver, but does not give me the opportunity to do so. I am downloading a link to my Minidump with the hope that someone could help me.Minidump SkyDrive link: https://skydrive.live.com/redir?resid=2FA3EA1D7C87B0CD! 300 & authkey =! AMQqBm28WoEP7JkThank you in advance.Just to add to the excsd.sys advice of zig - zag seem to be also involved in the accident:
1: kd >! devstack fffffa80046e97f0
! DevObj! DrvObj! DevExt ObjectName
fffffa80051738a0 \Driver\partmgr fffffa80051739f0 InfoMask field not found for _OBJECT_HEADER to fffffa8005173870fffffa8005172880 cannot load image \SystemRoot\system32\DRIVERS\excsd.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for excsd.sys
ERROR: Module load completed but symbols can be loaded for excsd.sys
\Driver\excsd fffffa80051729d0 InfoMask field not found for _OBJECT_HEADER to fffffa8005172850fffffa80051dd060 \Driver\disk fffffa80051dd1b0 cannot read the offbeat info from nt! ObpInfoMaskToOffset fffffa80046e75d0 \Driver\ACPI fffffa8003bfb590
> fffffa80046e97f0 \Driver\iaStorA fffffa80046e9940 cannot read the offbeat info from nt! ObpInfoMaskToOffsetThe excsd.sys is a component of ExpressCache.
The same laptop with a similar error has been reported in the following thread:
As in this thread study ExpressCache uninstall, update the driver of the TSRI and then, if you wish, reinstall the latest version of ExpressCache.
ExpressCache is not a required software, you do not have to reinstall if uninstall you.
-
USB - IF xHCI USB Host Controller
Hello
I found the USB - if xHCI host USB in Device Manager not compatible controller and the error is (this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)).
The operating system is Windows 8.
Please yor need support to work this device correctly.
I want you to know I solved this problem on my 7200 DV7T. I downloaded the latest drivers from Intel's WiDi:
These seem to be more recent than those provided by HP. I have installed all drivers you first (display, chipset, etc.), then I installed the WiDi software (link above). The USB - if USB Host Controller xHCI has been recognized very well. No more unknown device.
I hope this helps.
Jim
-
WARNING if USB xHCI USB Host Controller
Hello
I have a warning on the Device Manager with Intel WiUSB (USB - IF USB Host Controller xHCI).
My OS is Windows 8 x 64 and my model ThinkPad Edge E3300
Could you help me?
Thank you
Solution listed at this link: get essentially driver updated to Intel's WIDI.
-
USB - If xHCI USB host controller driver problem
My new Windows 8 in Sony VAIO found the problem with the USB - IF xHCI USB host controller driver, who couldn't reinstall Windows. What should do? I have not done the recovery discs! Please answer...
Thank you
I saw this post today and the information provided helped me to solve this problem.
Click hereThe link essentially says to visit the Intel Web site and use the Intel driver update utility. The utility automatically searches your computer for devices that are eligible for an update. Hope this helps you because it has helped me. Also I have updated my wireless driver while I was using the Intel drivers update utility as a newer driver has recently been made available.It worked for me; However, I ended up having to uninstall the old drivers Intel WiDi, then by restarting my computer before the setup.exe file would go and install on my computer (dell inspiron). I created a restore point in case it did not work, but everything seems to work smoothly!I must also stress that just remove the driver Intel WiDi also got rid of the yellow exclamation, and unless you plan to try to connect wirelessly to your computer to your TV, I don't think it's something you need. Here is a link that explains what is the driver:http://www.Intel.com/content/www/us/en/architecture-and-technology/Intel-wireless-display.html -
FAILURE of STATE DRIVER / USB - IF xHCI USB HOST CONTROLLER
My ASUS Zenbook UX32VD takes 10 or more minutes to start and just to display a blue screen with the text of "an error occurred...". DRIVER_POWER_STATE_FAILURE.
The tha solutions technical support gave me did not work
(Restart the factory system and lose all my programs... ¬ twice)After travel a lot, I found a video (youtube. com/watch? v = QYY2IHpI8Ow), the guy says, the problem is caused by the driver of a device
But the driver that represents a yellow mark is of the WiUSB from Intel, USB - IF USB HOST CONTROLLER xHCI (I Don t know what - this, sorry for my ignorance, but I just know I do not have any device USB D :))
I tried to update automatically, but just what the latest version shows...I don't know what to do, I've tried everything!
(Sorry for my English)
Hello
Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.Translate Windows 7 methods and use them on Windows 8.
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
Start Windows (applies to Windows 8).
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).We can analyze the minidumps if you make them available at the SkyDrive or other
file -sharing sites (such as MediaFire). If you have problems downloading the minidumps
Copy it to the desktop or Documents folder and download them from there. (This is
Likely NOT of great help on new construction).ZIP or download the content of the C:\Windows\minidump (only once you have made
suggestions initials at the top of this answer and IF the BSOD problems).Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7 and 8)
http://www.winvistatips.com/disable-automatic-restart-T84.html==========================================================
This "might" be a power problem, even if it's not the most common cause.
9F is probably a driver issue. Antivirus/antispyware/security programs can also cause these problems.
Have you added the recent devices or the updated drivers - do not forget to check in Windows updates of
see if a driver has been updated before that happens. This can also be caused by a loose card
or cable and even a weak power supply.This error means that a driver does not properly support the power state. Check in Control Panel-
Device to be sure management of great drivers are stopped not for sleep - double-click on display
Adapter - card NETWORK and WIFI - healthy and others - tab power management - uncheck allow
computer to power off. Maybe the only has a problem.(Use EXECUTION instead of start - search such as used on Vista or Windows 7)
WINDOWS key + X - RUN - type MSCONFIG.exe
General tab - tick this box start Diagnostic - APPLY / OK - REBOOT
Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
(and it might still be video interacts with something else). See link to the troubleshooting tool
above my generic driver update methods.Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE<-- read="" this="">-->
http://msdn.Microsoft.com/en-us/library/ff559329 (v = vs. 85) .aspxBCCode: 9F 0x0000009F<-- read="" this="">-->
* 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-------------------------------------------------------------
Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7 (and Windows 8).
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver
Driver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMYou can disable the driver verifier
http://support.Microsoft.com/kb/244617WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.If DriverVerifier creates a minidump upload it and post the link here so we can analyze.
--------------------------------------------------------------------------------------------------------------------
It's my generic how updates of appropriate driver: (update of your key drivers and BIOS)
This utility, it is easy see which versions are loaded: (VIEW of the value for hide Microsoft drivers
(-update those without drain in their names.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmMicrosoft - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWhat happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctlyI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
USB - if USB Host Controller xHCI emits...
I have trouble with the USB - IF xHCI USB Host Controller driver. It is said, that it must be reinstalled, but reinstall does not work.
Any suggestions?
I have ASUS laptop computer n56vz with built-in USB 3.0 ports. I tried to reinstall with windows Setup Manager. Nothing of above mentioned helped (I try Method 3: check if you are using the Fresco Logic FL1000 USB controller).
Then I deleted the USB - if xHCI drivers controller USB host and nothing seems to be a problem at the moment. There is no errors and the detection of material shows any new hardware devices, which I find very strange...
Thanks anyway for your help and messages. I know, if there will be problems with the dirvers clear.
Best regards!
-
Satellite Pro 6100 - USB host controller
USB host controller
Hello
And what do you know about USB host controller? Do you need drivers or you have problems with the USB ports?
Please explain your problem detailed in a few English phrases that others here can help you.
-
How can I add a USB host controller high-speed to my PC?
My OS is windows xp home edition. I get this message that the HI-SPEED device attached to Non HI-SPEED USB Hub.
The USB Composite device is a USB HI-SPEED device and will function at reduced speed when plugged into a port not HI-SPEED.
There is no host controller USB HI-SPEED installed on this computer.
Recommendation: You add a USB host controller high-speed on this computer in order to get maximum performance.
So, how can I add this USB host controller high-speed to my PC? Is - this material I must add and physically install to my PC?
As always, any help is greatly appreciated.
Thank you!
drake68
Hi Drake,
Review the devices USB connected to your PC and make sure that there is not a USB 1.x device connected to the same USB HUB (front or rear). USB 1.x devices will cause the USB HUB at the bottom shift to 1.x speeds.
You have an old PC (2002), it is possible that your PC does not have a USB HUB 2.0. In this case, you need to install a USB PCI adapter card.
-
Win7 SP1 - "Standard Enhanced PCI to USB Host Controller" does not start now
After I installed Win7 ultimate SP1 fine, I've now that in the Device Manager for the "Standard Enhanced PCI to USB Host Controller" device: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
Has found the solution on another site.
In Device Manager, click the Standard PCI enhanced USB host controller that shows an error, just was two more separate the two display errors on mine, choose to uninstall, both. Then click Action - Scan for hardware changes at the top, Windows reinstalls them both and has done so well here for both.
-
Usb host controller on the motherboard how?
Usb host controller how on the motherboard, and I want the architecture of the controller on the motherboard usb host?
Hello
In practice, if you have only 4 Sockets USB, you can only connect 4 USB devices even if your motherboard could, in theory, face several.
The manual of your motherboard can be downloaded here...
http://www.gigabyte.com/products/product-page.aspx?pid=3490#manual
.. What should give you all the technical information you need.
Tricky
-
upgrade to usb host controller high-speed
I received a message that my device could run faster if I have upgraded to a usb host controller high-speed. Is this something that I can download or I have to buy a new usb controller? Thank you, Kevin
If your system is old, it may have have USB 1.1 ports. Only way to fix it (if you use USB 2 devices. Either buy USB 2 PCI cards), or upgrade the system. If you get / have ports USB 2
-
Just a quickie...? That means USB Host Controller?
I have a HP Pavilion w/windows ultamate desktop computer. Recently there have been several accidents, but to my surprise was able to restore my pc. I still don't feel not convinced however that everything has been resolved. HP support was not able to solve my problem & refered me to Microsoft. I have not contacted yet, but plan on it. Just wanted to know what the heck to 'host' means.
Read this article - it gives you the basics you need to know about controller USB host (and info on the USP so): http://www.wisegeek.com/what-is-a-hi-speed-usb-host-controller.htm.
Here is another article with some additional information: http://wiki.answers.com/Q/What_is_a_hi-speed_USB_host_controller.
Here's a somewhat more detailed article: http://www.usblyzer.com/usb-system-architecture-components.htm.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Hello
Failure of the USB connection to connect to a printer. Try to fix it I removed the Standard USB Host Controller Port_ #0001.Hub_ #0009 and so the device is now marked as 'unknown device' with status = error #43.
How can I solve this problem?
Thanks, Eitan
"OK, what exactly should I do if"programs and features "?
Just look in the software for your printer brand list, select it and then click on uninstall on top.
It won't appear in programs and features if you have installed the software.
"If the printer driver was native to the operating system and installed automatically when you first of all connected printer, it should be removed in"Printers and faxes"or devices and printers."
Also what operating system your PC there? Vista or W7?
Maybe you are looking for
-
HP pavilion zv5000 will not cds or dvds. Operating system is Windows 7.
I was able to run Microsoft Office and download on my laptop, but now when I put another cd in the drive it will not work. My computer tells me to insert a cd, even if I already have. Thank you.
-
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata
-
How to do the AD role entirely admin
I have configure Weblogic Server to use AD as a provider of authentication and created groups in AD to use as roles in WCC. I gave the role of WCCAdmins all the permissions in the WCC, but it doesn't have the full Weblogic administrator or any other
-
The following Adobe master collection student version
HelloI am a student of the University of Poland and am interested in buying Creative Suite Master Collection and a few questions.(1) is valid enough to offer a discount for the program a student card?(2) I understand that the only way to get Creative
-
Hello!We are working on a reportingscript for our vCenter environment, and we would like to get the status of HA on our virtual machine.We would like to get a True/False value in the csv file for each virtual machine.I tried ".HA = (Get-VM $_. Extens