HP G61-110SA: HPG61 after use important update of the HP Advisor Win 10 processor

Similar Questions

• I cannot use windows update. The 80070490 error keeps coming back.

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• How can I use Office Update without the Office CD?

  How can I use Office Update without the Office CD? On the microsoft Web site, I clicked the options which mean that I would not need the CD (which was not provided with the laptop), but poartway through the service pack update, I get a request for the Office 2000 Professional CD.

  Any suggestions?

  Hello

  Did you mean an office or a note?
  As far as I know the a Note is part of the recovery Image and the CD is not supplied with the unit. In addition, Toshiba units are not delivered with the Office 2000 software.

  However, have you checked to aid either in Word update function?

  You will find an option called verification of updates
  http://Office.Microsoft.com/en-us/officeupdate/default.aspx

  Good bye

• Cannot use windows update, get the message "site has encountered a problem and cannot display the page you are trying to view.

  original title: can't use windows update, get the message 'the website has encountered a problem and cannot display the page you are trying to view. I am running xp. Can anyone help?

  I can't use the update. Still get the same message. Fix - it for Windows can not solve the problem. I am running xp. Help, please!

  Hi Hojo11779,

  You can see the mentioned knowledge base article and check.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Let us know if it helps.

• Recently, after using Windows Update, I noticed a few sites I visit, I can't view some images.

  It has gotten to the point where I restored my computer to factory settings. Everything worked until I used Windows Update. I have yet to install an anti-virus because it was literally just yesterday that I did this, so I know it must be a Windows problem, not a firewall, etc.. If it helps, I can't display photos from katespade.com, luckybrand.com and claires.com sites product. I noticed that all of them have a zoom + and -. Any help is appreciated!

  Hi, TheClaxons,

  You can restore the system to a date and time before the current updates.  See if that solves the problem; However, you take a big risk, access to the internet without anti-virus software.

  Microsoft Security Essentials is a free software.  I suggest that you download and install your security software preferred; then surf the web at your leisure.

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

• After 2.2 update, error: "the Apple software update server is not found."

  Apple Software Update just updated itself to the version 2.2.  After letting the Apple Software Update 2.2 finish, I receive the error: "the Apple software update server is not found.  Check your Internet settings and try again. "The tool also pointed out"the new software is available from Apple.  I run in a typical home environment to network with a router on FIOS on Windows 10.  A virus scan was clean.

  I just uninstalled iTunes and apps and fact a relocation fee.  Once again the proposed Apple Software Update app updated to version 2.2.  After the update successfully, the error appears again: 'the Apple software update server is not found.  Check your Internet settings and try again. »

• Error message in Outlook 2003"cannot open this item" after an automatic update of the spam filter Outlook 2003 (KB976882)

  After an automatic update which included KB976882 and restart the computer, I can no longer read the emails in Outlook or in the pane to previow, either by opening the item. Sometimes an error message appears "unable to open this item." Some emails appear to be open, but the view pane is empty (transparent). I suspect that it is related to the update of the junk e-mail filter, but don't know.

  You will find support for MS Outlook in this public discussion group: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.outlook.general

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Try to update Windows XP SP3 Media Center by using Windows Update, get the error number: 0 x 80070424

  When you use Windows Update Center for Windows XP Media Center with Service Pack 3 installed, I now get the following message is displayed:

  [Error number: 0 x 80070424]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues) I looked at the FAQ which makes no mention of SP3 but support States SP2 is underway, can you help me?

  Hey PABear and John_P.

  I found another link, and it's worked perfectly

  http://www.techiecorner.com/112/error-number-0x80070424-in-Windows-Update-solution/

  Thanks a lot for your help, definetitely remember Windows Fix It for later use

  Dave

• Colors in Windows 7 too bright/faded after running Windows Update for the first time (everything was going well after initial installation). See the details.

  I just installed Windows 7 Pro on a HP Pavilion with a HP w2007 20 ". I have had no problem of color first and everything worked fine. The first time I ran Windows Update, it included an optional update called "HP - display - HP w2007 LCD wide screen". That the update "has failed" to install and when I rebooted, my screen had a look very 'neon' - my desktop background, a picture of a tree with a bunch of Red leaves, was very washed out and now most of the leaves were bright red with no visible details. This is obvious everywhere, not only my desktop background (another example... small green circles next to the names of Gmail chat contacts are very bright green, more even than usual). Everything is too bright. I tried the following hotfixes:

  -Manually reinstall the update of the HP screen (it worked this time) and restart - did not work.
  -Reset my monitor to factory setting - has failed.
  -Download and install the latest HP driver for this monitor - did not work.
  -Through: "Control panel-> appearance and personalization-> display-> Calibrate color" and through an assistant color calibration (that's new for Windows 7?). Also, did not work.

  I have the dual-boot of Ubuntu installed on this machine and I think the colors under Linux are always very well, so I think it's a problem with Windows and not the monitor. Because it was working fine before, I would rather try to get everything worked, rather than the update manually the brightness/contrast of my monitor. Any ideas?

  A useful answer, I got on another forum (windows7forum.com). It worked:

  I had this problem too!

  In my case it is also explained by a driver from Windows Update called "nVidia display".

  Fortunately, I figured out how to fix it:

  1. Open Computer Management (start > right click on "Computer" > Manage)
  2. Select "Device Manager".
  3. Select 'show cards '.
  4. Right click 'NVIDIA GeForce 8600 GT' (or whatever your video card)
  5. Click 'properties '.
  6. Select the 'Drivers' tab
  7. Click on the button "return to the version.

• Best sites went after safari and update of the Sierra

  I have been using the functions of Top Sites page for many years and I love the functions. However, I discovered that the Top Sites feature seems to be gone after my update to Safari and Sierra. I can only have favorite site with small square icons displayed now whenever I press Top Sit buttons and the entire upper find options in Safari went? Is it true that the new update of Safari has put an end to the top site of the page function and options?

  Try Safari/bookmarks/Show Top Sites.

• best import/update of the puppets. file format of puppets?

  I wish that the import and export of puppets didn't remove the rigging.

  It takes a lot of time to rig a puppet exactly as you want, and then if you update the photoshop file it can be lost and try to remember all the parameters that you set.

  I found it best to try not to include any information of rigging in the photoshop/illustrator file and do it all in CA.

  But I always feel to add many things to puppets as I create them and they keep breaking when I reimport them because of the new folder hierarchy.

  I noticed adding the + sign creates just one file in CA, so I just create a folder in photoshop instead of use the + to make it more compatible for updating my puppet.

  It would be nice to save a puppet as its own file format, with all the rigging intact. Then you could just import puppets (with rigging) into your projects and scenes. Or is there a way to do currently?

  Mark

  You read our minds! In the next update, we will add the .puppet file type:

  Exploring new ways to animate with Adobe animation character CC (Beta) | Creative blog Cloud by Adobe

• After an automatic update of the El Capitan, initialize to send diagnostic request. Is this real or a Trojan horse?

  Auto-installé update for El Cap 10.11.2 12/17 unattended via usual application store auto-updated. When I opened to the top of the standby mode the MacBook was initially white Virgin, then spinning dot gray then the screen asking permission to send diagnostics to Apple and the developers. All looked for real, but it could be a kind of Trojan horse?

  Whether it's a major OS update, such as 10.11.1 to 10.11.2, it is legitimate.

  It will look as if you set partially up the computer again. Should ask you to allow the diagnosis must be sent, and then show a computer small logo that says: "Setting your Mac upward" with a few small "data bars" on the screen. I don't know why Apple did allow you to send diagnostics and set up your mac after each update. I guess they have to ask anytime you install new software to avoid any legal problems.

• After installation of updates, received the critical error, then stuck in a reboot loop, Windows Defender now firewall and Security Center are all off

  I recently downloaded updates from microsoft. One of them was Security Essentials. Well, when I did caused a critical error. My laptop shut down and restarted. then gave me the same error message and rebooted again. He kept in a continuous loop. I tried the system recovery, but that did not work. I managed to get him to stop, but now my firewall is disabled and the Security Center and Windows Defender. If I try to turn it on, it does the same thing again. I don't know what to do to solve this problem. I need help!

  Original title: critical error

  Hello

  1. you have any multiple security software installed in the computer?
   
  2. What is the exact error message?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Disable all third-party antivirus programs
  
  To disable a firewall, antispyware or antivirus program, right click on the appropriate icon for the firewall, anti-spyware or anti-virus program in the notification area in the taskbar. Then, click exit or click disable.
   

  a. in Windows Vista, click on start toreduce this includes this image, type appwiz.cpl in the Start Search box and press ENTER.

  b. in the list of installed programs, search for and then click on the program in question, and then click Remove.

  c. restart the computer.

  Note After you uninstall a third-party antivirus software, contact the manufacturer of the program or visit the company's Web site to see if a cleaning tool is available to help you remove any remaining files.

  Step 2

  See services

  a. click on start

  b. type services.msc

  c. navigate to the Windows event controller (right click on and select properties)

  d. set the startup type to automatic, start the service, click on apply and OK

  e to navigate to the Base filtering engine (right click on and select properties).

  f. set the startup type to automatic, start the service, click on apply and OK

  g. navigate to 'Windows Firewall' and select Properties (right click on and select properties)

  h. set the startup type to automatic, start the service, click on apply and OK

  Method 2

  Start your computer in a clean boot to avoid conflicts with third-party software.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  
  Note: follow step 7 of the article mentioned above to start the computer in normal startup, once you have completed the necessary troubleshooting.

  Method 3
   
  Look for errors in the event viewer.
   
  Please check the Event Viewer logs to find errors in application logs.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  
  Please post the results for a better understanding of the problem causing the reboot.
   
  Hope this helps

• After using deny permissions of the folder security, is no longer able to access the folder from anywhere

  Hi, this is how things went wrong: I tried to restrict access to a folder on our server by using the permissions denied, file security.  When I try to locate the file for other machines connected to the server I can not see it now, which is kind of what I was aiming for. However, I am not sure what I have done because even though I can see the folder by using the server machine, I can't actually access.

  When you try to open the file I get now: \Accounts documents refers to a location that is unavailable, it could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the internet or to your network and try agaiun. If it can't be located, the information may have been moved to a different location.

  When I right click and try and go to the tab Essensials in this folder, I get: the required guarantee inforamtion is either unavailable or cannot be displayed.  Help please!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://TechNet.Microsoft.com/en-us/ms772425