Two questions relating to the signature using restricted code API: s

Similar Questions

• two questions relating to the OBIEE 11 g Linux installer

  Hello
  
  1. do we need to install JDK 1.6 and above before installing OBIEE? as in below post what OBIEE uses it's own JDK.
  
  OBIEE 11 g on Windows 7 (64-bit)
  
  2 we need configure the DHCP in Linux loopback adapter as well as we do in windows? If yes how to do it in Linux?
  
  
  
  Please let me know the answers as soon as POSSIBLE.
  
  Thank you
  Jay.

  Hi Jay,.

  1. do we need to install JDK 1.6 and above before installing OBIEE?

  Not required

  2 we need configure the DHCP in Linux loopback adapter as well as we do in windows? If yes how to do it in Linux?

  On Linux x 86 operating systems, configure the host to resolve to the IP address of the loopback host names by editing the file/etc/hosts to contain the following entries:

  127.0.0.1 nomhote.nomdomaine hostname
  127.0.0.1 localhost.localdomain localhost

  After that, make sure that the host name resolves to the loopback IP address by typing the following command:

  / bin/ping nomhote.nomdomaine

  Kind regards
  DpKa

• Two questions relating to the archive redo logs with RMAN backup

  DB version: 11g
  
  I am new to RMAN.
  
  My database is in ARCHIVELOG mode. I intend to make a weekly backup for my db (02:00 every Monday). There will be all the incremental backups between these windows(Monday-to-Monday) of backup that I have would function for retrieving archived redo logs.
  
  
  Question1.
  I want to save the archived logs every day (for example at 23:00). How can I configure that?
  
  These are the configuration setting, that I intend to implement. I don't know how to set up the archive log backup
  

  configure default device type to disk;
  configure retention policy to redundancy;
  configure device type disk parallelism 1;
  configure channel 1 device type disk clear;
  configure channel 2 device type disk clear;
  configure channel 1 device type disk format '/u05/rman1/datafiles/rmnabackup1_%U';
  configure channel 2 device type disk format '/u05/rman2/datafiles/rmnabackup2_%U';
  configure controlfile autobackup on;
  configure controlfile autobackup format for device type disk to '/u05/rman1/control_files/rmnabackup1_%U';

  Question2.
  After that a new full backup is taken at 02:00 on Mondays, the archived redo logs accumulated since the last 7 days become unnecessary. How can I automate the removal of the archive redo logs with RMAN?

  Archive the log delete them all input command will take the destination of the log archiving log backup archive and delete this destination.

  In the log archive destination he has archived log in the sequence 1 to 100 then will he take the backup and delete any of the destination (Monday 23:00).

  In the log archive destination he has archived sequence journal 101 to 150 then will he take the backup and remove those in the destination (Tuesday 23:00).

  In the log archive destination he has archived log in the sequence from 151 to 180 so will he take the backup and delete any of the destination (Wednesday 10:00).

  It will continue like that.

  Concerning
  Asif Kabir

  -If you help brand the response as correct/useful.

• Set the signature using the API field only

  I have a situation where all PDFs you signed are created for each customer individually and on the fly.

  I must be able to define the scope of the signature using the API only.

  Is this possible? I can't change the pdf file and add any kind of labels. It must be done using an x, the value of the coordinate y.

  Hello Lawrence,.

  If you are looking to set the fields of the form through the API, you can see below reference material:

  https://secure.NA1.echosign.com/public/docs/EchoSignDocumentService21#FormField

  Kind regards

  -Usman

• Download the signature using the API and pre fill the signature

  I use echosign api to display forms to get the candidate (which comes on our site). We show the form of widget. We use more than 40 forms. It is difficult for candidates to sign all forms. Is there anyway I can get the signature of the candidate and pre fill out the signature using the API?

  If not, is there another way to do this?

  NOTE: Candidate - not a user in echosign

  Hello RajkumarMohan,

  By default, it is always required by the signatories to give their signature any document esigning. Even with the API, it is not possible. If it is a single widget with several fields of signature, once the signer signs a first field, and then when he clicks on the second field of signature, the signature is automatically populated in it.

  Kind regards

  -Usman

• We were members of creative cloud and when the membership was to be renewed, we asked one month free. This leads to 2 accounts creative cloud on our page... a renewed and paid for and the other related to the temporary use.  How to get rid of the tempo

  We were members of creative cloud and when the membership was to be renewed, we asked one month free. This leads to 2 accounts creative cloud on our page... a renewed and paid for and the other related to the temporary use.  How get rid of the temporary use of a month?  They both have the same ID and both appear on the administration page.  Thank you.

  Please contact customer service to get this resolved.

• How to replace the image on the layer using after effect API

  Hello everyone,

  I have a big problem, I need to replace the image on the layer using after effect API.

  Create a new film with my new image:

  AEGP_FootageH footageH = NULL;

  ERR (suites. FootageSuite5()-> AEGP_NewFootage (S_my_id,

  psd_path,

  & key1,

  NULL,

  FAKE,

  NULL,

  (& footageH));

  AEGP_ItemH layer_itemH = NULL;

  ERR (suites. FootageSuite5()-> AEGP_AddFootageToProject (footageH, new_folderH and layer_itemH));

  Then I have a film footageH Manager

  and Manager of my layer to the old image.

  AEGP_ItemH itemH.

  
  

  Please
  

  How to replace image on my layer exists?

  I have founded not nothing in Google, Documentation and examples.
  

  Hi mikhailv6888620 https://forums.adobe.com/people/mikhailv6888620>!

  Welcome to the forum!

  as I know there is no C API function for this.

  You can get the ID of the layer comp element and use AEGP_ExecuteScript() to find

  This point and change the source of the layer with the javascript API. (I do it

  as follows in one of my plug-ins)

  the text of this script is entirely internal in your plug-in. the user

  does not know that a call to java is involved... (if that matters to you)

• Question related to the execution of the query by using the links to the DB

  Hi all

  I have a source and target database. Both are 11.2.0.3.

  I have a query that is running on the source database and load data into the target database.

  I created synonyms in the target for all of the tables referenced in the query, remaining at the source.

  I run the query in the target using synonyms that I created. I see that the entire query became transferred to the source database and executed. The execution plan of the source was exactly the same as the way in which we could, if the query has been run directly there.

  No problems so far.

  Now, I have a database from different sources. Version 11.2.0.4.

  When I try to mimic the same behavior using this data source, the complete query will NOT be transferred to the source. He made on the source (remote site) full table scans, transfer of data to the target (local site) and then by performing sort operations & the index range scans (min/max) on the target.

  In both cases, all of the tables referenced in the query are accessible through the link in the DB.

  Please let me know if there is no setting of database / everything which could control how or where a query with all accessible by link DB tables are optimized and executed? Ideally, I want the entire query to be transferred to the remote and executed site.

  I can provide more details if necessary.

  Thanks in advance.

  Thank you sol.beach. Queries I tried both sources are in fact different. I failed to mention that.

  @John,

  We did recommend the creation of a view of the source, which is synonym on target and run the query. The client was not ready to create any object on the source system and so to test this workaround solution.

  ********************************************

  After some time, I realized that there is a hardcoded as SYSDATE column. Whenever I took it / I did as null, because the entire query is getting transferred to the source DB.

  "I changed 'SYSDATE column-name' to ' col_name (select SYSDATE from dual@remote_db_link). But this also seems to stop the query to be sent to the remote db as a whole.

  Try to work around this problem, but any ideas are much appreciated.

• two questions, hands on the record and SR/PR prometric IDs?

  I sent my questions to ocpexam_ww and get contradictory answers. I have two questions.
  
  1. in the past five years, I took the following courses: RAC, Linux for the DBAs, GRID, Performance Tuning, backup/restore, Admin workshop I, Admin Workshop II in different cities. I have certificates and registration IDs (even if we have a sticker quillogy gold covering the registration ID). I presented the eligible courses qualifications 'Hands on' on my account prometric I intend to get the oca, ocp, linux, network and perhaps rac certifications over the next five years. My account shows that two registered practical courses and anyone ranked my comments for other courses them marked as failed. I asked ocpexam, and they say that the first two are enough for the OCP. I know and understand that, but rather that the other doesn't have a marking would it not better mark their past for the qualifications of potential future certification? Especially since each class cost me around $6 k in travel, accommodation and registration?
  
  2. I have two accounts prometric which I asked to reconcile, but ocpexam response (s) that they have no record of them. My transition from 1z0 - 042 was recorded under a number of "PR #", while my hands previously mentioned Records are registered under number "SR # What should I do? I take today 1z0-007 and 1z0-043 before switching to the seller.

  1 failure hands on classes of forms: form of the House of Commons that you submit is directly related to a specific path. If you have submitted several courses for a certification path - 10g OCP DBA form, for example, one would be accepted or "passed." Others would be stranded because if they were to be used for the other certification paths, they would need be submitted by using a different key code.

  2 fusion ID: looks that OCP team could not find a record of your exam 1Z0 - 042 - is - right? So, go ahead and submit your request to ocpexam and let them know that you submitted this application before and they have been unable to find the folder of 042 review. Provide as much information as possible - all Prometric ID. And ask them to move forward and get worse if they cannot locate the 042 record so that this can be settled before the passage of Prometric to VIEW.

  Kind regards
  Brandye Barrington
  Certification Forum Moderator
  Manager certification program

• Question related to the extension of disk C

  Separated from this thread.

  Hey, I want to extend my C drive and have a lot of free space on my D drive, but the problem is my drive C is on disk 1 (TPG) and my D drive is on disc 2 (MBR) and I can't seem to transfer between the two discs... Anyone know if this is possible?

  Hi Stef,

  Thank you for visiting Microsoft Community to ask your question.

  MBR (Master Boot Record) and GPT (GUID Partition Table) are two ways to store the information of partition on a disk. You must convert the MBR to GPT or vice versa, then you would be able to share the space between them.

  For help, please refer to this link.

  Convert a disk from MBR in a GUID partition table disk

  http://TechNet.Microsoft.com/en-us/library/cc738416 (v = WS.10) .aspx

  Hope that the information provided is useful. Do not respond if you need more help.

• relative to the signature of an application

  Hey guys,.

  So, I signed my app and realized at the last minute I had a few changes need to be made. Bad decision... I know..

  So I went to resign and use the SJC that I had before, but it gave me an error so I went directly to the first stage of the signature actually the app... and this is the error I got:

  barsigner error: Server error: Code signing request failed because this file was previously signed.

  I know they're trying to say, because I've already signed the app, I can't do it again... but how to fix it?

  Do I have to request a new key signature?

  G

  No, you just need to change your version number. so if it was 1.0.0 before, change it to 1.0.1 (or whatever you want it to be.)

  This must be done in your "yourappname" - app.xml file.

• Two questions about upgrade the sensor software

  Hello

  my questions are:

  -can I put image recovery partition for a camera of the ID of the ID - MC?

  -I can make the signature version for a camera of the IDM IDS?

  ... or in both cases I have to type the 'upgrade' in the sensor cli command?

  Thnks,

  Graz.

  You can upgrade the signature of IDM version. (Be it with Setup-> auto update or Administration-> update).

• Failed to retrieve the country using 11 g API

  Hi all
  
  I need to get the country out of all users with the help of a programmer.
  
  I use following code to extract the details of the country for all users, but he always comes back "null" for all users even when users have valid countries in usr_country.
  
  
  UserManager userMgr = Platform.getService (UserManager.class);
  < String > returnAttr value = new HashSet < String > ();
  returnAttr.add (AttributeName.USER_COUNTRY.getId ());
  User user = userMgr.getDetails (Userlogin, returnAttr, true); where Userlogin contains valid user connection string.
  String country = user.getCountry ();
  
  
  Let me know is there another way to get the details of the country of the user.
  
  Thanks in advance

  Just checked and it seems that user.getCountry () does not work and returns null always the other way to do so is:

  user = userManager.getDetails("User Login", "xelsysadm", null);
  mapAttrs = user.getAttributes();
  iter = mapAttrs.keySet().iterator();
            while(iter.hasNext()){
                 key = iter.next();
                 if(key.equalsIgnoreCase("Country")){
                      val = mapAttrs.get(key);
                 }
            }
  

  Got another way to do it:

  attrNames = new HashSet();
  attrNames.add("Country");
  criteria = new SearchCriteria("User Login", "xelsysadm", SearchCriteria.Operator.EQUAL);
  users = userManager.search(criteria, attrNames, parameters);
  for (User user : users) {
           attributes = user.getAttributes();
        keys = attributes.keySet();
        for (String key : keys) {
            val = attributes.get(key);
            System.out.println(key +" == "+val);
       }
  
  }
  

  HTH,
  Frédéric

  Published by: Bikash Bagaria on December 12, 2011 16:29

• question related to the configuration of POF and use-sub-classes

  Hello
  
  I noticed that by default POF in coherence.jar (coherence-pof - config.xml) requires the use subclasses true indicator (the ultimate-sub-classes use value is true if any POF loaded configuration file specifies that it is true), and making it impossible to obtain if certain error messages a subclass of a registered type is not listed specifically in the POF-configuration and users can silently losing data in this way.
  
  My question is:
  
  The indicator of use subclasses in coherence-pof-config. XML set to true only because of Throwable-s, or are there other classes provided by coherence that are serialized by a resolution of the subclass and so dependent on the indicator of use subclasses being true?
  
  If only the Throwable-s which depend on, instead of set to true, can we set it to false and use the following instead of ConfigurablePofContext as class the class serializer for POF-enabled services:
  

  import com.tangosol.io.pof.ConfigurablePofContext;
  import com.tangosol.run.xml.XmlElement;
  
  /**
   * This class extends ConfigurablePofContext with the possibility to
   * configurably disable the subclass-allowed setting forced true in the
   * coherence-pof-config.xml, and still be able to use ThrowablePofSerializer for
   * each not specifically configured Throwable subclass.
   *
   * @author Robert Varga
   */
  public class ThrowableAwareConfigurablePofContext extends
        ConfigurablePofContext {
  
     /**
      * By setting this flag to true, it is possible to disable subclass
      * resolution. Interface resolution remains untouched.
      */
     private boolean m_fDisableSubclassAllowed;
  
     /**
      * {@inheritDoc}
      */
     public ThrowableAwareConfigurablePofContext() {
     }
  
     /**
      * {@inheritDoc}
      *
      * @param sLocator
      */
     public ThrowableAwareConfigurablePofContext(String sLocator) {
        super(sLocator);
     }
  
     /**
      * {@inheritDoc}
      *
      * @param xml
      */
     public ThrowableAwareConfigurablePofContext(XmlElement xml) {
        super(xml);
     }
  
     /**
      * Sets the {@link #m_fDisableSubclassAllowed} flag. You can set this as an
      * <init-param> in the Coherence cache configuration file.
      *
      * @param disableSubclassAllowed
      */
     public void setDisableSubclassAllowed(boolean disableSubclassAllowed) {
        this.m_fDisableSubclassAllowed = disableSubclassAllowed;
     }
  
     /**
      * @return false if disableSubclassAllowed is true, or result from the super
      *         implementation otherwise.
      */
     @Override
     protected boolean isSubclassAllowed() {
        return (!m_fDisableSubclassAllowed) && super.isSubclassAllowed();
     }
  
     /**
      * If the super implementation could not resolve the type id for the class,
      * and subclass-allowed is disabled and clz is a {@link java.lang.Throwable}
      * subclass then it falls back to the configuration for
      * {@link java.lang.Throwable}.
      */
     @Override
     protected int getInheritedUserTypeIdentifier(Class clz) {
        int result = super.getInheritedUserTypeIdentifier(clz);
        if (result == -1 && !isSubclassAllowed()
              && Throwable.class.isAssignableFrom(clz)) {
           result = getUserTypeIdentifier(Throwable.class);
        }
        return result;
     }
  }

  Thank you and best regards,
  
  Robert

  Hello

  Ok. Here goes. Yes, you are right. If you can tolerate interface use being true, the only thing you have to worry is Throwable instance (or subclasses it) in Java and Exception instances (or subclasses it) in .NET.
  Please let me know if you have more questions.

  Best regards
  -Dave

• My question relates to the use of Windows Vista Edition backup Home Premium 32-bit

  I use Windows Vista Home Premium 32-bit backup to create a backup on an external hard drive files. the disk is almost full, I noticed the backup appears to create a new set of files each time that it will consume a considerable amount of space.  Is it safe to delete old files to free up disk space as current backup do not complete due to lack of space. I don't want to lose all the essential files in the erase process.

  Yes, you can delete the old files, because they are not needed when the new backup is created.
  My suggestion is to set up a backup incremental and will ovewrite the old backups so that you don't have to delete old backups.