HP G62-340US: it will be useful to upgrade my CPU?

Similar Questions

• HP G62 B60SV: Hi guys I think to upgrade my CPU!

  Hi guys, I think to upgrade my CPU!

  I did some research but I couldn't find any information about the CPU, upgrade my PC model.

  I have a HP G62 B60SV with an Intel Core i5 460M.

  I want to upgrade with an i7 with good Intel HD graphics processor (3000 and more). Thank you!

  Your laptop has discrete graphics or only the Intel HD Graphics?

  The only Intel i7 CPU that is listed in theHP G62 Notebook PC Maintenance and Service Guideis:

  Processor of Intel Arrandale™ i7-620 M (2.66 GHz, 4 MB
  total of L3 cache, 1066 MHz) - Dual core 35 W

• On Inspiron 530 s fan will get stronger with upgrade to cpu e8600?

  I have a 530 s Inspiron with an Intel Pentium Dual Core e2180 processor.  It was very noisy but once I cleaned the fan and the heat sink, he ran run quietly enough.  I read that the e8600 can run more hot.  The question is do you think that the fan will have to speed up (get stronger) to support.  I must say that I am enjoying my now quiet computer.  He was a fan of stock.

  Thanks to Bev to answer a bunch of questions about the upgrade of the 530 s in the thread below, it was very helpful.

  en.Community.Dell.com/.../19372573

  Hello

  This isn't a must for lovers of running strong, but yes, it will speed up intermittently (but will not strong).

  As long as the machine is not overheated despite the heavy loads and the fan is quiet, nothing to worry about. But make sure its certainly go :-)

  Concerning

• Can I use the HP Director software (WinXP) on my laptop HP G62-340US (Win7) with HP PSC 1510xi?

  Can I use the HP Director software from my Office WinXP (HP Pavilion 325c) on my laptop HP G62-340US (Win7 64 bit)?

  If so, the version of the XP software will work on my Win7 64 bit system?

  I really liked the HP Director functions when I used it on my desk.

  Maybe... Can I use my discs backup or restore of my office to install more software HP Director on my laptop?

  I found my answer!  Director of HP has been replaced by the HP solutions Center - which I installed it and it works.  However, I prefer the interface on the HP Director than the Solution Center.

• HP G62 - 340US Black screen on power on, no corresponding led error code

  Hey all,.

  Having a problem with my laptop HP G62-340US. The computer will continue to feed on, but the screen does not light, but the caps lock light has a constant slow continuous flashing. The indicator light next to the charging port is orange, as the light next to the wireless button. (There is no NumLock on the keyboard of a light)

  I looked at the link to HP support for this issue, located here:

  http://support.HP.com/us-en/document/c01443366

  But was unable to find my specific situation. Any help or idea would be greatly appricieated.

  Thank you!

  Try to start the machine without the battery and connected to the power adapter. Try to boot the machine with a single chip memory installed (if you have two). Try changing the location of the chip memory if you don't have one. Do a hard reset by removing the battery, power adapter, pressing the power button for 1 minute, reconnect the battery and power adapter, and then try again. If this does not work, you will have a video chip problem that would require a reflow (I know this isn't your model, but it shows you what may be involved):

  http://www.YouTube.com/watch?feature=player_detailpage & v = bnkQNmKauEc #t = 4S

  Good shops use pistols temperature controlled at worst and stations Infra red reflow for more accurate results.  The video was just to give you an idea what may be wrong.

  http://www.YouTube.com/watch?feature=player_detailpage & v = wEVv7p - JDc #t = 8 S

• HP G62-340US: HP G62-340US

  Hello

  I have already ordered through HP backup diskettes and tried to recover my installation of Windows 7 by using the provided disks.

  Before this attempt at recovery facility, tried to use several iterations of Linux, so I formatted my HARD drive and recovery sector.

  The first disc seems to be fine and install correctly, but the 2nd is suspended from the installation of 12% and will not continue.

  If I try to boot without the inserted discs, I get the error: BOOTMGR is missing, press Ctrl + Alt + Delete to restart.

  In vain I tried reinstalling 3 times.

  Hi @PKuptz ,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP G62 - 340US Notebook and issues with fault of system recovery. Here is a linkto some troubleshooting tips.

  If this does not help, please use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately. Thank you.

• HP g62-340us: install a new motherboard.

  I have a HP G62-340US I work for a friend and would like to get the best motherboard I can to make it as fast as possible and would like to know what would be the best motherboard to get. The product is #: XH066UA #ABA is the serial No.: [Personal Information deleted]. Do you have any suggestions?

  Ken

  Ken first if you are a disabled vet your screeen-compatible name we thank you for your service.

  Your model is G62-340US, which means that you have these specifications:

  http://support.HP.com/us-en/document/c02497777

  Regarding the manual which means you UMA graphics so the motherboard is:

  Map of system PCA UMA 592808-001

  The motherboard, it is what makes a model 1.0 or 1.1 or 1.2. However, you can install everything listed motherboards. But your processor will not work on all the boards. So if you try to install a rod is not compatible with your processor will need you a Board and a processor which I assume you want to avoid, although this vintage AMD processors are fairly inexpensive and you have a processor in the end very few options of this model.

  You have the P340 processor, which only works on 1.1 and 1.2 models. The best motherboard, that you can install using this processor would be:

  Map of discrete system HD6370 / 1 G with card reader (only for model 1.2) 632186-001

  This one is hard to find but here's for $109, which is not too bad:

  http://www.motherboardmall.com/HP-motherboard/HP-632186-001.htm

  If you want to discuss a better card mother/CPU combination post back

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• My G62-340US, I just had to replace the hard drive. My recovery disks appear to be compromised. Help

  On my G62-340US, I just had to replace the hard drive. I did 4 recovery disks when it was new. Now restore the recovery discs 3 ran, but will not be the 4th disk. The 4th information located anywhere without having to buy a new set? Where can I buy a single disc?

  Hello:

  As far as I know, you would have to buy a whole series of new.

  But, if you can read all 25 characters of the product key of W7 on the bottom of your laptop, I have a free solution to install a simplified version of W7 using the code the product key on your laptop.

  Here's how...

  Download the ISO file from W7 Home Premium 64 bit from the Microsoft link below.

  http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO 2147483647 English Windows 7 Home Premium x 64 X 17 - 58997.iso

  Make sure that you got the file from xx GB 3. integers download, in rare circumstances, you get a full notification of download, but you do not receive the entire file to download.

  After you download the ISO file, you can burn it to a DVD using the ISO file burn option on your DVD burning program, or you can use this tool to transfer the ISO to a flash USB DVD or 4 GB drive.

  The tool also performs the bootable media.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Then go to the care of your laptop and driver page for available software and drivers that you need.

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&docName=c02497777&LC=en&product=4308554

• HP G62-340US: how to know if a HP G62-340US is a model 1.0 or 1.1?

  How will I know if the laptop is a model 1.0 or 1.1?

  Ken

  I didn't get into this so deep, but here we are. Yes, if you look at page 22 of the manual, some motherboards are only "for the 1.0 model" or "1.1 only.

  Manual

  G62-340US has an Athlon II P340 and ATI HD 4250 UMA video

  UMA video cards do not seem to be a model number. So I'd say the G62-340US is neither a 1.0 or 1.1

• G62-340US: laptop freezes constantly

  HP G62 - 340US Laptop, 3 GB, AMD Athlon II PC340 Dual Core 2.20 GHz, Windows 7 64-bit (product #XH066UA #ABA)

  I just can't take more.  Since the first day, this laptop has been poor performance.  Hang in there too.  Takes forever to open a program or a browser.  Anytime you click anywhere, the blue spinssssssssssssss circle.

  How can I reformat to factory settings if I do not all discs?  I don't think this will fix the issue because it was so out of the box.  I tried so many different things to boost performance (updated touchpad driver, updating the bios, remove the starting applications, etc.) but it does not matter.  I was going to upgrade the RAM 8 GB / 3GB, but I don't think that it should be considered to prevent him from hanging.

  Just want to go back to factory settings and re - assess.

  Thank you.

  @Barbenae ,

  Hello and thanks for the display on the HP support forums.

  With a laptop computer hooked up here there's several reasons for this.

  Have you cleaned your laptop to reduce the accumulation of things on the heatsinks and fans for the laptop can be cooled?

  Have set you your system power settings?

  Did you run the diagnostics of hardware BIOS to see if it is a RAM problem or hard drive?

  If this is not the case, here are a few links to check.

  Test a hard drive from BIOS

  Laptops HP - diagnostic system (F2)

  PC HP hardware diagnostics

  Regarding the recovery of the system, there is a link on how to do so.

  Performing a recovery of HP (Windows 8) system

  I hope this helps you.

  Thanks again for posting and have a great day.

• How to remove the frame of the screen on HP G62-340US

  I have a broken screen I want to replace but I'm not sure how to remove the framing safely. There should be a few screws at the bottom, but I don't see any. There are plastic flat points where I thought I'd find screws. This model don't live on the bezel, so burst you just off the coast at the base? I watched a few videos on the internet, and each similar to mine model has screws on the bottom.

  HP G62-340US

  Edit: The plastic parts is proved be stickers. I used a sewing needle to take them off.

  Hello:

  If you have not read the help manual, I suggest you do so.

  Please refer to Chapter 4 for R & R procedures component.

  http://h10032.www1.HP.com/CTG/manual/c02641795.PDF

• Windows 7 HP G62-340US Notebook Recovery Fail

  Hello

  I searched a bit and couldn't find a solution to my problem, either on the forums or official guides.

  Recently I bought HP recovery disks system (because it wouldn't let me create my own):

  Startup recovery Manager does not allow me click on left - recovery option it is grayed out.

  How can I reset my computer to the conditions of the factory with the disks?

  I insert the disc recovery 1 (of 2), restarted unplugged everything except the power cord the computer (off, waited, then restarted), you can press F11 and consulted the at startup recovery manager - still no option to make the system recovery. I repeated this step several times.

  Windows 7 HP (64)
  G62-340US Notebook
  Series: CNF0502D9C

  Any tips?

  Hello

  Good to hear it is running

  About whether or not to use the drive, it is really a matter of personal preference - my personal opinion would not not use it just to keep the machine free of bloatware.

  In addition, if it lack of pilots (looking for the warning icons in Device Manager), they can be downloaded from your product on the link Page.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4308554#N1691

  If there is no missing driver you don't know what to download, go to Device Manager, right click on the device problem, and select Properties.  Click on the Details tab, choose hardware ID in the drop-down list and post back with the details presented in the title of the value.

  Kind regards

  DP - K

• My Norton anti-virus software used to work and now it does not work with the new Firefox update. This corrected soon? Otherwise, I will not use the product

  Since your last update that my Norton toolbar will not work... If it does not work, will not use your product. Can it be fixed quickly?

  According to the article, I linked to before, you will need to update the norton version 2015.2.1.13 toolbar that is compatible.

• Firefox, or the Profile Manager will start. In my task manager, the process uses 50% of my cpu but does nothing. I like browsing with firefox, how do I fix?

  I tried to restart my computer, the I tried to uninstall and reinstall uninstall, delete all files of firefox and folders, then reboot and then reinstall. Also, I tried to open the Profile Manager to edit my profile. After you have reinstalled several times and try to open the Profile Manager before launching firef0x, I got the firefox crashed window and the process in the Task Manager always uses 50% of my cpu. The most recent strike and then re - download gives me an error "the file is corrupt" and will not even install the program.

  Kill the process that you see, including any plugincontainer.exe, only once firefox has stopped running don't try to update.

  Completely unexpected instances of firefox running can sometimes be the result of malware activity.

• If you use Firefox I can not long enlargement of two fingers to work on my Apple. The same site will expand using Safari, so I guess it has to do with Firefox

  If you use Firefox I can not long enlargement of two fingers to work on my Apple. The same site will expand using Safari, so I guess it has to do with Firefox

  Some actions have been removed in Firefox 4 and later versions.

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  browser.gesture.pinch.in -> cmd_fullZoomReduce
  browser.gesture.pinch.in.shift -> cmd_fullZoomReset
  browser.gesture.pinch.out -> cmd_fullZoomEnlarge
  browser.gesture.pinch.out.shift -> cmd_fullZoomReset
  browser.gesture.pinch.latched -> false
  

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.