Webcam does not appear in Device Manager
I have a model of portable pavilion G62-233NR windows 7 64-bit, with a built-in webcam. YouC'm software was bundled with it and worked. Now the webcam is not found by one of the video programs AE Skype, Youcam... etc...
I also noticed that the webcam does not appear in Device Manager. I tell me that I have to reinstall a driver for it but do not know what driver to install. HP has the following availble drivers for my model but which? If one of the pilots was labeled "webcam", the task would be easy. I hope because the driver is missing in Device Manager that has installed a driver will set missing cam... I'm worried because I don't see a driver named "webcam" in the list... but what else could the problem, how can I get the driver installed, if that's the problem.
Hello world
I have windows 7, in the balk suggestion you type cmd
then you have a suggestion, then you must right-click of the mouse and select administrator. otherwise, you will not be of addministrator and you can not make the order.
Greetz
Steve
Tags: HP Notebooks
Similar Questions
-
Satellite A500 - 17 X - Webcam does not appear in Device Manager
Hello
I'm looking for more assistance with a recently purchased A500 - 17 X running on Windows 7 64 bit. The Webcam worked when buying, but has suddenly stopped working. Web camera software is up-to-date with the latest download from the Toshiba site, but returns the message at the launch:
"Web Camera initialization failed" Please, you check the camera device & restart the application or computer.
I checked the Device Manager under Imaging for webcam devices & is not listed (it's my own laptop; I also have a Toshiba laptop provided by employer & when the webcam is listed on that one, so I presume that it must appear in the same place!
Does anyone have any suggestions? Would it be a bad connection to the webcam itself, i.e. a warranty issue, or is there a software solution to check if the webcam is actually present? I scan for new hardware & nothing new is detected.
Thanks in anticipation!
Jon
In my opinion, you should try to reinstall the driver for the webcam. Remove preinstalled software, restart your computer and reinstall the latest version available.
Best test you can do is to reinstall the recovery image. with factory cam settings should work fine again.
-
I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.
http://support.Microsoft.com/kb/982116/en-AU
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/GP/cd_dvd_drive_problems
See if the information above solves the problem.
See you soon.
Mick Murphy - Microsoft partner
-
My video card does not appear in Device Manager... it's a HELP of PNY (GeForce FX5700 VEDDR 256MBAGP GF5700VA8D25D)! DRIVER NEEDED?
-The 'legacy' drivers are not technically a restore because there was
never a movement forward to Win7.
They are only a newer version and probably the last, the pilot who was provided for
Some older cards on older (legacy) systems. -
Windows 7 Pro. Dell desktop computer.
My integrated card readers (there are 4) do not work. They do not appear in Device Manager. They do not appear in the computer.
In Control Panel > programs and features > I uninstalled the Realtek card reader. Then installed latest version of the Realtek site.
Control Panel > troubleshooting > hardware and audio > configure device > says hardware changes could not have been detected.
Tried system restore, but it failed.
What should I try?
Thank you
Hi Bruce,.
Thanks for posting your query on the Microsoft Community.
With the publication of the description, I understand that the card reader does not work on your machine, Windows 7 Pro. I will certainly help you get this fixed number.
I appreciate your efforts to resolve the issue.
Since you've already tried several troubleshooting steps for the fixed number. I wish to inform you that this problem can occur because of compatibility issues. I suggest you refer to the suggestions of Work Sam Varkey responded on December 28, 2009 in the below mentioned thread and check if this is useful:
Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.
-
Samsung SH - 222AB DVD Burner is winning 8 compatible but does not appear in Device Manager
I installed a Samsung SH-222AB DVD burner as a secondary disk drive, but it does not appear in the Manager of devices or anywhere else on my PC, and yet it is 8 compatible windows
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=Samsung%20SH-222AB%20DVD%20Burner&vendor=Samsung&Locale=1033%2C2057%2C3081%2C4105%2C16393&BreadCrumbPath=Storage%20devices|Samsung%20&Type=Hardware&tempOsid=Windows%208
the door opens, so it has power to the drive
Seems that it was not a drive problem, data SATA cable broke the connection that is installed on the motherboard
-
Chat LX-3000 does not appear in Device Manager
Chat LX-3000 does not appear in my device manager
OPERATING SYSTEM:
Windows vista Basic.
PC: siemens futjitsu
Hi Kiradante,
· You receive an error message or error code?
· Did you do changes on the computer before the show?
I suggest to return the item and search for the error code for the device.
Get help with Device Manager errors
http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
I hope this helps.
-
I had a problem with my touchpad for months. The synaptics touchpad driver is installed but the touchpad does not work and does not appear in either (just my external mouse) Device Manager. . I tried various troubleshooting methods, but none worked. Any help would be a lot for me. Thanks (in advance).
PROGRAMS AND FEATURES
DEVICE MANAGER
Hi @decyferme,
Welcome to the HP Forums!
It's a great place to find answers and suggestions!
You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.
How can I find my model number or product number?
I understand that you had a problem with the touchpad for months because it is not responding. Although the driver is listed in programs and features in the Device Manager is not listed.
Have you checked for virus and malware?
Have you done all Windows updates?
Have you tried to run the troubleshooter in Windows?
Did you run HP Support Assistant to facilitate updates of HP?
First you would try this step. Some models, you can enable or disable the touchpad by double clicking on the top left corner of the touch pad. Please see if it is applicable for you.
Then in Device Manager, view hidden devices and search the hardware changes see if the touchpad now will be seen.
Here is a link to the HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8) that should help you too.
To say thank you for the reply, please click on the thumbs upwards the button below.
If this gave a solution for you, please choose the solution provided to help others to find.
Good luck!
-
Satellite C660d-102 Wlan does not appear in Device Manager - which driver?
My Satellite C660d-102 wlan network adapter does not work it is not displayed in Device Manager...
Which driver should be used to solve the problem?I am using Windows 7 64 bit on it...
Tried my level best to install the wifi adapter...Please help: (...)
Hello
Laptop seems to support the Realtek RTL8188CE WLan card.
You have the Realtek Wlan driver that you can download here.
http://APS2.toshiba-tro.de/WLAN/ -
Hi all
I'm trying to configure a USB external (interface audio) on my HP Pavilion DV8 1250ea. The device driver fails to install properly and is unable to detect that the device is connected (even if I hear the Ding-Dong, and he appears in the Manager of devices, but with an exclamation point).
I went to the device manufacturer's support and they advised me that the problem is likely to be caused by my system doesn't support USB2. They also told me how can we test this hypothesis - I looked at the Device Manager and told me I'd see something like:
http://www.native-instruments.com/knowledge/images/General/USB_power.gif
However, mine is:
http://img99.imageshack.us/img99/3236/nousb2.PNG
See, no USB2!
I just checked the section support and chipset installed udates and other things that sounded relevant - still no change. My system really not support USB2 - it has clearly stated in the specifications that the model does support. This seems to be the most likely reason why my audio interface does not work.
Thank you very much!
Hello
Click on the link below:
-
I'm trying to connect to my external hard drive, but the auto test failed
and I know that the problem is not the cable or anything like this cause it works on other 2 computers
It won't work on my laptop
I tried many solutions but most of them that the hard disk appears in disk managementand they change its trajectory
but in my case that's not she appears only in management device that I tried to uninstall it but also did not work
After that I did any suggestions? !Go to your computer manufacturer's support web site and search for the latest Windows 7 drivers for your specific model number.
Download the drivers to a folder on your hard drive and install all of them, from the card mother/chipset drivers, LAN, Audio, USB, Graphics, SATA, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsUpdated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyJ W Stuart: http://www.pagestart.com
-
Sound worked yesterday and not today. What I've done so far: use a 4 days ago restore point. Used when problem wizzard and the result is "material changes may not have been detected. Used Microsoft Fix It and the result is "material changes may not have been detected. Device is not listed in the Device Manager and digitization of material changes yeilds no results. Motherboard is an Intel DG33TL and there is no drivers not appearing on the site to Intel for Windows 7 64 bit. Update chipset and video drivers.
Hi rageousrsx,
Try thedifficulty here for does not solve your noise problem.
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box. The dvd drive no longer works. When you put a CD, you can hear him swirling but the screen does not open. In addition, in the Device Manager section, dvd is not listed. I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).
I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it. Clearly, I don't know enough about computers.
In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that. Obviously not used often.
You can provide any help would be greatly appreciated. The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little. The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist). Thank you!
You may consider replacing the internal DVD player or using an external DVD burner.
-
Satellite U400-138 - wireless network card does not appear in Device Manager
Hardware WiFi isn't in Device Manager.
Win Vista 32 bit, UltimateRealtek Semiconductor Corporation
May I ask what is the problem with your laptop?
You description is not really useful -
Driver HP probook 4530 s wireless not exist and does not appear in Device Manager
Hi guys,.
I have hp probook 4530 s I also have the original cd recovery (OP - drivers)
After I installed new windows and install all the drivers, I don't think Bluetooth, wireless drivers, also both appear in the connection manager is two steps still exist in the Device Manager.
is it possible to make it work.
Thank you
Hello, try to hard rest your laptop (remove the battery and ac adapter and pressed the power button 20 sec, simply plug in the power adapter and you start a laptop computer), and then press F10 to access the bios and 'restore the default value' and "save changes and exit" ===> ok else try to install Hp softpaq Download Manager (it will check alls missed drivers and their installation) : http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060882&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-105327-1 And if the same issue, try to check the wireless antenna cables or test with another wlan mini card of the same model (you find the link bellow who remove and replace this part) : http://h20464.www2.hp.com/results.htm?SID=5060880&MEID=C2E018CF-081B-479F-A6A0-DCE8406A2623 Best Regards, Wajdi Engineer HP GS1 and CE Team
Maybe you are looking for
-
Problem with applications of discount shaped on Apple Watch my daughter
Not too long ago, my daughter won a Apple Watch of our local orthodontist. This is a fun gift for the do - http://miamiorthodontist.com/miami-invisalign-provider-february-2016-contest-win ner / Anyway, she has problem with applications to fitness for
-
Programmatically set the size of a table control (not the number of col and lines)
Hi all I am trying to create a little VI, in which the user selects the number of columns and rows in a table, and after clicking on a button 'OK', the table control is displayed in the control panel (to be filled in by the user). To do this, I use t
-
I can't get rid of av security suite
I have tried everything that I can not view internet or anything on my main user account and I need to use safe mode to do this I tried several antivirus programs and it will not let them remove the corupt there with somehting exe file it says please
-
When I click on to: in order to show the contacts at the e-mail address at the bottom of the list are contacts, always at the Cape and dark, I havenet put here and are unknown to me. I was not able to change offshore and it seems that the continuous
-
Zbook 15, glued to the screen to diagnosis; no OS
I'm trying to do a clean install of Windows 7. Drive is formatted but now my computer will not boot, it keeps raising the diagnostic screen. Pass all controls, and then he complains that it cannot start the hard drive, I need to install an operating