HP h8-1141 fan runs at full speed all the time

Similar Questions

• Portege R500 - the fan runs at full speed during the recovery from sleep mode

  Hello

  The fan in my R500 works at full speed when he was in the system sleep.
  The only thing that helps is a reboot. :-/

  Is there a solution to this problem?

  Hello Allan

  I really wonder that you define this as a problem. From my point of view the problem is something else. You have a problem when you cannot boot up your laptop. You have a problem if you are unable to use certain features or if you can not open the DVD player. It is a problem.

  Back to your problem: have you tried to change the power settings, to change the method of cooling in the Toshiba power settings? Play a little with it. I optimized the use of my wholesale Satellite P200 and the fan operates at low speed. OK it is not the best example to compare the two models of laptops, but try it.

• Why my PC fans turn at maximum speed all the time?

  I have a (new)< 3="" months)="" hp="" pavillion="" p7-1449.="" the="" fans="" (case+cpu)="" tend="" to="" run="" very="" fast="" (load)="" until="" i="" restart="" the="" pc,="" and="" hit="" esc="" for="" boot="" options.="" i="" usually="" enter="" the="" bios="" screen="" and="" exit="" without="" changing="" anything="" (by="" this="" time="" the="" fans="" slow="" to="" less="" than="" 1000="" rpms="" each) ="" and="" the="" pc="" boots="" up="" with="" the="" fans="" at="" the="" lower="" speed.="" the="" fans="" stay="" low="" until="" the="" load="">

  I hear fans ramping down when I do and reported by the BIOS fan status seems to support my theory that the fans really slow. Unfortunately, I do not yet have equipment controlling software installed on my PC so I don't see no confirmation of the fan speeds up when running in Windows 8. [HP has none of these tools?]

  If I stop and restart Windows 8 normally (so that it uses its startup optimizations 'fast'), then fans seem to go for the maximum RPM.

  The machine was purchase in Nov 2012: apparently not the internal dust is the problem and it would be not fixed by forcing a boot cold. I suspect that it is a software problem (I consider the offending software if it does not reset the hardware correctly at startup).

  It seems that the fans turn upward but never slow down: is it possible to fix this? I wish that the machine to shut up when it isn't loaded (without having to reboot to get it that way). Otherwise, there is no performance or stability problems (yay).

  Hello..
  This seems to be the problem with your bios on the desktop.
  Discover the same fan speed if you have only the keyboard, mouse and the power cord is connected.
  Also check out an update of the bios on the desktop.
  This would probably solve the problem.
  You have a bios update available on the HP Web site.
  Click on the following link.
  
  Link - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5306208#N240
  
  Check to see if that fixes the problem. Or other RESPONSE.

• Case fan runs at full speed

  I accidentally shorted the circuit case fan on my motherboard HP (explanation below), and now the fan runs at full speed all the time. Apart from the fact that it was a stupid thing to do, it will be a long term problem and should I try to reset the fan speed switch?

  (Long version) It's hot here these days and my computer fans seemed underpowered. I put a splitter at the exit of the case on the motherboard fan and added a second fan in addition to the original fan. All it worked well except the new fan seems to run pretty slow. I wanted to get a voltage reading card fan, but I accidentally hit the two sensors on my voltmeter and the computer shuts down immediately. He has started up and worked well, except that the throttle was no longer working and the fans were running at full speed. This also explains why the second fan turned slowly before when they were both being strangled.

  I guess that in the end I got my wish to have my fans running at full power, I just wanted to see if there are future problems leaving this way.

  Hello design_guy,

  You should not have problems with the fan rotating at high speed, with the exception that you can reduce the life cycle of the fan.

  You can install software on the computer that will allow you to adjust the speed of the fan to the computer which may help you extend the life of the fans and give you a bit of control over them.

  Something like SpeedFan should do the trick.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• Satellite Pro A120 - fan runs at full speed

  I've had my laptop for a few years, and for about a week now when I first turn on the fan runs at full speed. I restart the computer immediately and fun runs normally. I suspect overheating or dust problems since it works at full speed as soon as it is powered but not after a reboot. I left at full speed for a long time to see what is happening - I is not too annoying. I usually restart immediately.

  These laptops have the sensors of dew or something? I guess the House is cooler just now.
  Advice anyone?

  Ritchie.

  Hello

  I doubt the s sensor issue or something like that
  Cooling modules are controlled by the BIOS. The fan table that contains all the details about the features of the cooling module is stored in the BIOS and I recommend the default BIOS settings first

  So, start the laptop, press F2 and access the BIOS.
  Press F9 to get the BIOS default settings, and then save the changes and exit the BIOS.
  Of course, the cooling modules must be verified if the vents are not blocked
  The dust is more a cause of such symptoms
  Remove dust using a jet of compressed air can be useful in your situation

• Since installing OS 10.11.3 and use of Adobe apps on my Mac Book Pro fan runs at full speed!

  Since installing OS 10.11.3 and use of Adobe apps on my Mac Book Pro fan runs at full speed!

  What can you do about it?

  The CEPHTMLEngine assistance program is the problem, check your activity monitor.

  Here is another discussion on this problem:

  https://forums.Adobe.com/thread/1961935?TSTART=0

• Satellite U500-10F - Dungeon fan turning ON and OFF all the time

  Hello world

  Just bought my u500-10F and installed Windows 7 Enterprise on this.

  Having a very weird problem, the fan keep turn on/off all the time every 10 seconds or more, even without any CPU load. Any ideas? Is there a fan control software?

  Rgds,
  Arley

  As you know that Win7 is not released and without support, there is therefore no Toshiba Software for any type of power control and the fan at the moment.

  Have you noticed the same behavior of fan preinstalled Vista operating system?

• Satellite A300 - 24 X PSAGQE: fan runs at full speed

  Hello...

  I recently bought Satellite A300 - 24 X PSAGQE T and I have little problems with fan.

  The thing is, it does not work until the temperature rises to something about 75 degrees, but then continues to run at full throttle, even if the temp. decreases.

  SIW ISC: ACPI - 45, the CPU cores around 44 HARD drive is 36 and the fan always runs at full speed. Ive tried a couple of fan speed, program management, but it did not help.

  Is there something that could help me with this prob?
  Thank you for any response.

  Hello
  Try to update the BIOS of the laptop. You should be able to download this on the Toshiba site of the country in which you bought the laptop. I hope this helps.

  Concerning
  Ben

• The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

  xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

  Hello gorgonzola1111,

  I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

• Processor and fun of rear cooling fan runs at full speed on Pavilion HPE h8-1120it

  Hello, since yesterday when I turned on my HPE h8-1120it HP Pavilion the CPU fan and rear fun cooling are always rotating at high speed, and they never stop. I have nothing no hardware changes, no change in software. Two days I will I work all day without problem, I turn off as usual the PC, I'm going to bed and then yesterday morning I turned on and now I have this problem. The PC is brand new (I bougth it about 1 month ago). There is no problem of temperature (now I 19 ° C on my computer room).

  Read another similar post I figured might be a bios problem. The version of the bios is 7.11, I tried to see if there is an update of canno't ' t there, but I find an update of the bios for Pavilion HPE h8-1120it.

  I burned a CD with the hardware HP Vision Diagnostic and I run the pleasure of tests and they all passes. During these tests, the pleasure seem to achieve the right speed in the progress of the test.

  I noticed this strange thing: when I bought the PC I immediately activated in the bios the use of VT to use hardeware virtualization with VMWare player. Yesterday, I found this setting changed and disabled and it's very strange because I did not change the values in the bios.

  What can I do? The noise of the fans at full speed is impressive, that I can't work on these conditions!

  Thank you

  Davide Angeli

  Hello

  There are not many fans rated at 4 000 rpm. With this type of fan RPM coupled with your observation that VT missing then your PC seems to have a problem.

  Maybe it's time to contact the HP Support.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• [Aspire V3 - 771G] Fan runs at full speed without reason

  Hello world! I come here after some time to research how to fix this weird problem.

  The fact is: at the time I push the power button on my Acer Aspire V3 - 771 G, starts the fan rotating at high speed, making a horrible noise.

  I have this laptop for 3 years now and this problem is only 5 days ago.

  I did nothing to do except clean the fan with a compressor of air (by ventilation, without desasembling the pc).

  I've tried several things:

  -First of all, by using SpeedFan to monitor the single my laptop fan (useless because SpeedFan does not reconigze the fan)

  -Control of the overheating (at least none in the task of program manager used a lot of CPU, and all temperatures are correct, between 40 and 50 degrees idle, screenshot: http://www.noelshack.com/2016-18-1462730392-capturegbfg.png )

  -Then, after reading a few posts, remove the battery (nothing happens)

  -Then, I check the BIOS for any < fan="" setting=""> > (there's nothing like this in the BIOS Acer (the most recent version for my laptop)

  -Finally, I tried you use software such as NotebookFanControl or ACFanControl (nothing too, he just tell me that the fan is running at 164%, crazy?)

  So after all these things, I'm fed up and my laptop computer fan just keep running like a beast. It is a very big problem for me because I'm audio recording and this sound quite kidding with my voice on the record. And now, I can't change my laptop, for a few reasons.

  So I'm begging for your help, I except someone could help me with this.

  = CARE COMPUTER =.

  OS: Windows 7 (64 bit)

  Processor: Intel Core I7 - 3632GM

  Graphics card: Nvidia GeForce 710 M

  With the help of these tools: MalwareBytes Anti - Malware, CCleaner Premium

  = CARE COMPUTER =.

  Hi again once this has resolved itself. Spinning crazy fan either but it's not broken. I'll buy a laptop cooler to fix overheating.

• Fan runs at full speed and never stops on Satellite Pro A120

  the cpu temperature is 30 ° c and the fan is always at top speed.
  I have try all the possible settings of the Bios.
  I can't update the Bios because there is only 1 version of the Satellite Pro A120 and is not possible to replace the existing one.

  Thanks for any idea!

  Have you tested this change in method of cooling in the sleep tool? Make sure that the cooling rack is not dirty and nothing is blocking the vents.

• sent said full box all the time - but it is empty - impossible to refer to any emails sent

  When I write an email and send it says sent box is full - I have compacted repeatedly but no joy.
  any suggestions welcome

  I have 299 messages sent now that deleted much nadb it say 4GB? more than 6000 and only 1.25 GB inbox.

  So say your settings:
  Email IMAP account:
  selected: "Place a copy in.
  selected: 'Other' and 'envoy on local issues.

  This means that even if you use an imap account you are not recording the sent items on the server with all your other emails. Instead you save the in local folders on your computer.

  Try this.

  • Right-click on the folder sent to local folders.
  • Select "Properties".
  • Tab 'General information' - click 'repair file '.
  • Click OK
  • Click on the small black arrow to the left of "Local folders" to the collapse of the local folder hierarchy.
  • Then click New to open the Local folder tree so that you can review all the files.
  • Select / highlight all emails. (Ctrl + A); they appear as the 'conversations' in the messages pane.
  • Archive your emails - click the "Archive". Emails must appear in the file Archive of local folders. Your "sent" folder should now appear empty.
  • Then right click on the "sent" in the local files folder and select "compact".

• VI does not work properly when run at each full speed or highlight the run mode, but running at full speed after the starting and stopping of the execution mode games

  Start labview, so fix that will probably teach me a lot. Looked and saw a lot of posts of things only work in games of the run mode, but nothing like this. I have attached the relevant real-time and FPGA VI.

  The code is supposed to read a motor encoder. When ran regularly, it works somehow. It will update the counter of how sporadic all few seconds a fraction of a second. When ran in climax run mode, it appears really up-to-date. After that matches the execution mode is canceled, it works perfectly. Can someone find out what could be the problem?

  Ended up staring at me. I am sure that the problem was that if there is only one element in the FIFO when it checks first, it eliminates the two elements when the FIFO filled.

  Fixed it by adding a test for the number of items before and reading only if there are enough items to read. Attached file sets for reference.

  I have still no idea why he was running after delivery to highlight in the first place. We will never know. Bonus points for the answer = P