HP HDX18 TouchPad (no tapping or pressed):(aider s'il vous plaît)

Similar Questions

• my iPhone 6 fall into the sink, what to do? :(aider s'il vous plaît)

  I turn it off after that I saw a blur on the screen and let dry

  Unfortunately, the iPhone is not waterproof. Usually, phones and water do not mix, and water damage are not covered by the warranty. Corrosion has already begun.  You must schedule an appointment of engineering to the theApple store to evaluate the level of damages. They will offer you the best solution.

• ZV5000 needs drivers touchpad with tap and scroll

  Hello! I just reinstalled XP on a HP ZV5000 laptop. The driver has been installed for the touchpad ALPS does not support tapping or scroll functions. The installed version is 1.00 as indicated on the downloads for this model, but this driver only supports the basic functions of touchpad and has no specific settings available in the section of the control panel mouse. Before the reinstall press the keys and scrolling features worked well and had specific touchpad settings. Can someone tell me please the good driver that supports these functions. Thank you!

  Hello:

  Please see if this driver does what you want it to do.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-79212-1&prodTypeId=321957&prodSeriesId=3688868

  Paul

• Print Windows problem Viewer:(s'il vous plaît aider)

  My old computer used to print in a variety of sizes, including the contact plates, which is really useful. Now, the only option it gives me is to print a 'full page photo' does anyone know how I can get these options? I tried to play with the settings and had no joy. Any help would be greatly appreciated!

  Jessica

  Hello

  Have you installed the latest full featured Windows 7 driver/software package for your printer since getting your new computer? If not, Windows can use a generic driver with fewer features & so your problem.

  If your printer is old, a generic driver may be all that is available. Please visit the support pages of the Web site of the manufacturer of your printer for further compatibility information and Windows 7 drivers.

• mistakenly dropped a table:(s'il vous plaît aider)

  Hi all
  
  By mistake, I dropped a table, is there anyway I could get it back.
  
  Concerning
  Rahul Kalra

  Version?

  FLASHBACK TABLE TO BEFORE DROP;
  

• I still don't see the lyrics on windows support

  I followed all the instructions in the Help menu, and I still don't see the words, why? I wrote the lyrics on 'advanced tag editor', then, Play menu, lyrics, captions, and subtitles , and I clicked on if Available . And they does not appear:(aide s'il vous plaît quelqu'un!!)

  VV1sper - please do the following test:

  -Go to start all programs accessories sound recorder-->-->-->
  -Early check, if you do not have a microphone which is very well, saving a blank audio file in this case is not a problem, record for 30 seconds to a minute.
  -Save the WMA file on your desktop
  -Open Windows Media Player 11 and go to your library
  -Drag the newly created file in the box that says 'Elements Drag here'
  -Read the file and click on read the list (but not the menu topic is on-air)
  -Right click on the file and go to Advanced Tag Editor
  -Insert the words; Type some text in there manually, about 10 lines, do not cut & paste the lyrics from another source.
  -Now click on the menu item Now Playing

  Do you not see the words on it displays newly created file?

  If this isn't the case, please perform the following steps:

  -Click Start, type CMD in the search bar and right click the icon calls command that appears and click left on run as administrator
  -Type:
  SFC/scannow
  and press ENTER.

  This analysis of your Windows installation, corrupted files and repair them.

  Also, please proceed as follows in Media Center 11:
  -Press the Alt key
  -Go to help and Windows Media Play
  -Click on the link to the Technical Support information

  Please copy and paste all the information under Audio & Video Codecs and filters MPEG/DVD so that we can take a look.

  -Thank you

• Help:(ennuis avec WMP)

  :(aider s'il vous plaît.) all of a sudden WMP won't play .avi audio or video files and youtube videodisk I, it was working yesterday of ideas? will not work with any media player

  Thanks in advance

  :(aider s'il vous plaît.) all of a sudden WMP won't play .avi audio or video files and youtube videodisk I, it was working yesterday of ideas? will not work with any media player

  Thanks in advance

  Opt for a system restore.
  Select any restore point before this problem.

  much too drastic without trying everything first els

  ===============================================
  I was just wondering why you think that the system restore's drastic? I use it
  often to save me from various problems. I'm just guessing you
  was able to think about the system recovery?

  See the following articles:

  Windows 7 - what is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  -Features - Windows 7 system restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• Removal of the portfolio

  How to remove the portfolio of 11 GR 2... I can't find any help on this... I'm not being able to because of portfolio I can't be able to do certain things. So initially I want to remove my wallet... Help, please. Thanks in advance.
  
  When rm ewallet.p12 portfolio is deleted
  then change the set of system encryption key identified by pass;
  
  It is said, ORA-28374: typical skeleton key not found in portfolio
  
  and the previous portfolio that has been deleted is back. I'm really helpleass:(aider s'il vous plaît.)
  
  Published by: 938067 on June 26, 2012 09:04

  Hello;

  I think it's a bug. This document tells the patch:

  Deletion and recreation of the portfolio in 11.2 to ORA-28374 [ID 988022.1] results

  Portfolio management and certificates

  http://Web.DEU.edu.tr/doc/Oracle/B14099_16/core.1012/b13995/wallets.htm

  Best regards

  mseberg

  Published by: mseberg on June 27, 2012 05:01

• How can I disable tapping on Satellite A210-103 with a Synaptics touchpad

  Hello

  How can I disable tapping an A210-103 with a Synaptics touchpad.
  Tapping means to me, that when I touch the touchpad of the notebook translate under circumstances like a mouse click, on which I don't want.

  In the settings of the Germans, I found nothing of such "tapping."

  Jürgen

  Hello, Hans Juergen

  Of course, you can turn off the tapping.

  I assume that you want to disable this tapping and instead of tapping you want to use the two buttons on the touchpad. Am I wrong?

  This can be disabled
  Control Panel-> mouse-> last tab settings of the device (or similar).
  There you have to choose the Synaptics TouchPad settings

  The new window should open, and you could find a lot of different details and parameters.
  You must mark the second option tapping. It s from the point of view of all.
  Here you uncheck the option enable tapping

  That s all ;)

• Two finger Tap ALPS touchpad Flex 2 15

  Bought a Flex 2 15 pc a few days and I have tried many things to enable tap two fingers to right/middle mouse click... I have ALPS touchpad and currently use the v.8.201.1611.222 driver (I tried the previous drivers to). Shouldn't be any way to emulate the Middle click of the mouse with the touchpad?

  I got exactly the same problem on a 500 of Yoga - also in the ALPS.

  I have found no solution either but I managed to fix it myself and I shared what I discovered. Should surprise my fix if is not the same.

  https://forums.Lenovo.com/T5/Lenovo-Yoga-series-notebooks/two-finger-tap-right-click-Alps-Yoga-500-H...

  Take advantage of a touchpad with tap with two fingers to right click! The way it should be good from the beginning. Most other manufacturers seems funny to do things... Wonder... Or is - this just pure ignorance of Lenovo? This is one of those very small seemingly insignificant things that have a huge impact on the user experience... (!)

• different problem from the computer touchpad portable 8570p

  I am aware of the feature that turns the touchpad (tap on the top left corner) on and off.  I use the keyboard all the time, and my problem is that it is a great feature - if you're right-handed. As a lefty, I'm constantly turn off the touchpad and have to press twice on the upper left corner to re - activate. In addition to suggest HP they hire left-handers to test their products, I wonder if there is a way to disable the function of the touchpad, so I can't stop and reactivate all the minutes. I want the touchpad to work all the time!

  Hello

  Try the following.

  Open windows control panel, open mouse, the Clickpad settings tab and then click the button settings Clickpad - option, you must disable is called "Tap to turn off" - the actual location of this will vary a bit your touchpad hardware/software but should be similar to the example below.  When the option is deselected, click 'Close' in the first window and then apply and Ok in the remaining one.

  

  Best regards

  DP - K

• Satellite U400 - 15 h - key touchpad makes a clicking noise

  Hello.

  I ' v just bought a toshiba u400-15.
  She seems to have a problem in a key of the touchpad.

  After pressing the left key, he made a kind of 'click' when it goes up.
  The right key does not have this sound. Is this normal?

  Thank you.

  Good bye. Valerio

  Hello

  It looks like a problem of button touchpad mechanics.
  I think in your case only a replacement of touchpad button would be a real option

  What do you think of this opinion?

  I think that using ASP is necessary and therefore, you must contact the ASP in your country for a test of touchpad

  But is it really so annoying problem? I mean the technician replace it but you will have to send the laptop and have to wait a while until this problem could be solved.

• How to disable the touchpad on Satellite L300-19F with Windows XP Home edition?

  Toshiba Satellite L300-19F, who was with windows Vista
  I installed windows XP and everything works fine.

  Since I'm on USB mouse to run I want to disable the Touchpad, but when I press Fn + disable key for touch pad it does not work.

  Need help.
  One can tell me what the problem is?

  Hello.

  To disable the mouse pad, you can go to control panel-> mouse control and disable the mouse pad, or you can use FN + F9.

  Kind regards.

• Synaptic touchpad on/off button does not work? ??????????​ ?

  I bought the new HP G4-1037 you laptop...

  I installed Synaptics version 15.0.7.0... All things work correctly but the ON / OFF button at the top left with indication light does not work... Somebody help me how I can enable this feature of the touchpad.
  .

  Press twice on the upper left corner when the led on the touchpad.

• HP Pavilion dv6 default off touchpad?

  Often when you type on the HP Pavilion dv6 cursor spontaneously jumps to a different location, it's because my hands did with the touchpad.  Tapping the upper-left corner of the touchpad twice disable it. What is good; However, I do whenever I get on the notebook.  Is there a way to set the touchpad to be 'off' by default on startup, so I don't have to take steps to disable all sessions?  I want to be able to activate the touchpad at will by masking tape in the upper left corner.

  Thank you

  Jeff

  Here is the solution:

  Select:

  "Control Panel".

  'Hardware and sound '.

  "Under"Devices and printers"select"Mouse"
  The 'Mouse properties' dialog box is displayed.

  SELECT: "TouchPad settings" tab

  Check: "turn off the internal pointing device when external USB pointing device is attached.

  Yes, that's all!

  Thanks Mumbodog to direct me in the right direction.

  Jeff