HP\HP LaserJet 200 color MFP M276\Help_Learn\Help.exe works but does not display anything?

Similar Questions

• HP LaserJet 200 color MFP m276: HP LaserJet 200 color MFP m276nw - scaning problem

  Dear gentlemen/ladies, Documents on the flatbed scanner / / UH m276 Color MFP HP LaserJet 200 cannot be scanned in the network folder, scanner, in my office by WiFi. He keeps giving the error message "username or password is incorrect. This user account and password are valid. "Please note that the wireless test is successful. A such problem, until the desktop computer (some bad sectors on the hard disk) has been repaired at the shop of the computer a week ago. However, I can use apps in my office to print and use the HP LJ200 M276 Scan to scan documents on the printer tray and save it in any folder remotely via WiFi. Please please advise solution/method that I can do to solve this new problem. Stephen

  Hi @U-Talents.

  Welcome to the Forums of HP Support! I read your post and see that you are not able to scan to network folder. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I have provided a document to configure the scan to network folder. Follow the steps, there is a section to create the folder and set up the sharing and security:Scan of the control panel (including Scan to Email, in PDF format, and to a network folder) for HP LaserJet Pro 200 Color MFP M276n and M276nw.

  This post is @wardell1, it can also help with this error message: try to configure the scan to network folder, name of user and password is incorrect. Do not take into account the model.

  I have also provided a @ShlomiLstation, on the same issue: scan to network folder fails.

  Try these documents to see if they help, and if there is anything else I can do, let me know. Thank you.

• Urgent: HP LaserJet Pro 200 Color MFP M276

  Heeeeeeeelp! Urgent!

  I am looking for the software and driver for HP LaserJet Pro 200 Color MFP M276.

  To the HP Web site, there is no download available.

  Who can help me with a link downlod?

  [Personal information]

  Hello

  Download the software on the HP site is fully accessible, I downloaded it without any problem at all right now.

  The following lik select your operating system and click on send, and then click Download for the full feature software and drivers:

  http://support.HP.com/us-en/product/HP-LaserJet-200-color-multifunction-printer/5097648/model/5097653/drivers

  If you have problems please specify what operating system you are using.

  Shlomi

• HP LaserJet 200 color MFP M276nw trouble after faxing

  My operating system is Mac OS 10 10.6.8 product # is CF a 145.  When I send a fax, it goes through, but then I get a 'call' short message and then I get a message 'connection' that don't die out.  If I hit Cancel, and then 'Cancel' message comes on but won't turn off.  I have a Panasonic 5.8 GHz Digital expandable wireless answering machine and 5 handsets that are connected to the base unit.  I have not connected the base unit to the printer.  That I should?  Help, please.  It's a 2 line phone system, but I'm now using only one line.

  Hey Lakewoman,

  I understand that you have a problem with sending a fax from HP LaserJet 200 Color MFP M276nw.

  Unplug the phone devices that you have plugged into the phone jack.
  Connect one end of the telephone cord provided in the box with the printer on line 1 port at the back of the printer.
  Make sure that you connect 1 end to the telephone outlet and other online 1 on printer
  Use only the telephone cable provided with the printer

  This document will help help.

  http://support.HP.com/us-en/document/c03363598

  Please do not hesitate to contact me if you have any other questions

  Thank you

• HP LaserJet 200 M276nw: Configuration of the network for HP LaserJet 200 color MFP M276nw

  Can the M276nw of 200 HP LaserJet can be configured to scan to a network without initial setup of a PC folder? Without having first to connect the unit to a computer first.

  We run a virtual environment and the printer will need to scan to a folder configured network and this should be done through the device. Of course, file permisisons will be completed before. I think I saw a manual where the Embeded webserver had this configuration, but would have to make sure, before committing to the purchase. Thanks in advance.

  We gladly invite you.

  Yes, the printer supports the SMB Protocol indeed.

• HP LazerJet 200 Color MFP M276: My HP Pro 200 MFP printer is printing a magenta background

  My HP Pro 200 MFP printer prints magenta background.

  I replaced the ink cartridge and clean the rollers in the printer.  It works very well at the moment.

• LJ-Pro-200-Color-MFP-M276-Full-solution-12201 - Windows XP - fatal error has occurred with the HP Installer

  Can someone help me to go with my new printer.  I'm unable to go ahead with the HP Installer.  Message error "fatal error occurred...". »

  Download Driver on the hp site does not.

  Have done the following:

  1 deleted everything about previous printer

  2 removal of Skype

  3. unlocked in the properties of the Application

  4 defrag

  5. full scan

  6 firewall & AVG 'off '.

  7. disk cleanup

  8 dial-a-fix

  9 Windows Update

  10 scanned with AVG App

  11 rebooted 3 times

  12. revival of the installer of HP 7 times

  13 checked compatibility

  Thank you very much.  I would be grateful 'something' anyone can suggest.

  Concerning

  Elaine

  JALOPY,

  I just tested the installation program and it works fine. Please check if you have a universal print driver installed on your machine. If you do, then I suggest this uninstall, reboot and try again.

  You can check to see if you have the driver installed by accessing your print server properties, click the driver tab and see what drivers are installed.

  Please let me know if it works or you need help.

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• LaserJet p1102w: hp laserjet p1102w have downloaded drivers from the web site but does not work

  Tried to download the driver from hp Web site wireless or usb connect to laserjet 1102w but stoops working and quots will prompt you to dissconect cable when the wireless connection is established... but never happens! Help please

  Please try this document

  http://support.HP.com/us-en/document/c02124639

• HPLaserjet 100 color MFP M175a: hp laserjet 100 color mfp m175a suddenly very slow

  I have a printer HP LaserJet 100 color MFP M175a, which has always worked well (except when in cooling mode). All of a sudden he started printing very slowly: for example, last night I sent a document of 20 pages to print at about 21:00 and was still waiting for it to end at midnight!

  Nothing has been changed in the settings.

  What can I do to fix this?

  Thanks for letting me know NOG55.

  Have you tried another USB cable? Just to rule out it.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  On the printer, select the Setup button, reports, report of Config.

  That print slow or fast?

  If you encounter this problem with printing of the hardware self-test also, update the firmware of the printer.

  Software & drivers. Select your operating system, click Next, click the link for the firmware.

  If you're just the printing of the computer problem, uninstall and reinstall the printer software.

  Thank you.

• Acrobat DC does not display of spot colors

  Mac OS 10.10

  I have an InDesign CS5 document with a spot color background.

  When I export to PDF (PDF/X1a) and open the file in Acrobat DC, there is no background color (preview separations shows there is a spot color in the document, but does not display all of the ink of that color)

  If I open the PDF in Acrobat 9 or X, the background color is displayed correctly.

  Is there a setting in Acrobat DC I don't know? Do I have to use a different export setting (I tried several unsuccessful).

  Thank you!

  Hello

  Please go through the next forum thread and see if that fixes the problem.

  Tones do not display in Acrobat DC

  Concerning

  Sukrit diallo

• LASERJET PRO 200 COLOR MFP fax of failure?

  I bought 200 COLOR MFP LASERJET PRO but I don't see any failure of fax for each fax sent. This option is to go to the menu fax and printing various reports from there. I was wondering this adjustable device upward so it prints fax delivery report after every fax sent?

  Hi bananko,.

  Welcome to the HP Forums.

  I see you want to receive a confirmation by fax for faxes.
  I'll be happy to help you.

  What is the name and the product number of your printer? How can I find my model number or product number?

  You have the printer Laserjet 200 M276?

  If you have a different model, let me know.

  Here are the instructions for the M276.

  Touch Menu Fax icon on the printer screen, select Fax, Fax of Confirmation reports. You can change the settings to receive a fax confirmation after every fax sent.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great day.

• Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

  Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

  What I've tried so far:

  Installed the latest drivers > unsuccessfully

  Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

  Have any suggestions what to do next?

  Update: the solution provided in this thread solved my problems:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

   

• HP Laserjet Pro 200 Color MFP FAX answering machine vs M276nw

  We have the following MFP: HP Laserjet Pro 200 Color MFP M276nw

  Our office has a phone line to be shared between the phone and FAX (M276nw). The phone is a phone single line of integrated with a digital answering machine Panasonic KX-TG7531 model. I can't seem to find the right combination of settings for ringtone for the phone and the FAX that allows callers to leave a voicemail without the FAX modem tones interfere when the caller leaves a voice message. It's as if the fax does not recognize that the answering machine picked up and he continues to make sounds of modem. The tones are saved as well as the message of the caller's voice, which makes the message difficult to understand. In most cases, the caller simply hangs up without leaving a message (we've heard talk about this later).

  Please tell us how to implement. Thank you!

  Furthermore, the HP Laserjet Pro 200 Color MFP M276nw replaced a MFP from brother, but the Brother FAX has worked with the same phone from Panasonic.

  Hi crmarrio

  I understand that you are having problems of fax.

  Run this test for the fax.
  In the home screen, press the button on the key.
  Tap the service button.
  Tap the fax service.
  Touch run fax test.

  Check all these fax settings.

  Here is a url for the fax troubleshooting.

  http://support.HP.com/us-en/document/c03363598

  Go to the icon/fax setup menu/Advanced Configuration key / private receive/disable it.
  Go to thewrench icon/service/fax service/error correction/stop.

  Go to Settings icon/fax thewrench / fax/advanced/change configuration to speed it to the middle.

  Go to the key icon/fax installation base/menu Configuration/response/game of rings rings.

  (if using an answering machine-more rings on fax and answering machine or rings of mail without a voice for the fax, but receives no voicemail, should get installation of distinctive ring on the line in this case)

  Go to the key icon/fax setup basic menu setup/response/selection of auto mode.

  Go for a key icon/service menu/fax service/clear saved faxes

  Go to key icon/fax installation base/menu setup/distinctive ring/set for proper ringtone type. (if you don't have a special ringtone set on all ringtones.

  Update the firmware of the printer by usb connection.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&docName=c03363598&LC=en&product=5097654&

  Let me know the results of the fax test, and if you were able to send or receive a fax.

  If you're still having problems, let me know and I send you private message how to reset the printer.

• HP LaserJet Pro 200 Color MFP: HP LaserJet Pro 200 Color MFP M276n: low memory

  Hello

  my new M276n printer has memory problems. Printing over two pages are stopped with a notification of "memory". I searched this forum and found a 'temporary' solution (reset printer to default settings) and a stage of 3 mysteriously missing (deleted the message). This does not in the long run because after only 4 more printing, I have the same problem again. I don't print many, mainly Amazon returns labels and information. Reset or not, the information page shows 127MO 256 MB available memory. What is the other half serving?

  Issues related to the:

  1. is there a solution?

  2 can it help if I disable unnecessary features (fax)?

  3. can I disable fax? (If Yes: how?)

  4. is there a solution?

  Thank you!

  Restore the default settings is not usually serve the memory of a printer.  You need a cold reboot to complete this procedure.

  Cold Reset as follows:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-cold-reset/TD-p/5060955

  The video at the bottom of the first page is very useful.