WCS: Is the name of the controller of tertiary sector mandatory?
Hello
I have improved my WCS to 4.2. After that, whenever I want to configure an access point I get an error message "" name of the controller of tertiary: this attribute is MANDATORY. "." Please specify ".
How can I disable the which? Thank you
Hi Tobias,.
It seems that this Bug has been postponed;
CSCsi24972 Details of bug
Controller of tertiary sector - is not not required
Symptom:
WCS 4.1.83.0 with 3 or more linked WLC.
Try to change the configuration of an access point, and if you do not have a defined tertiary you get an error saying that it is mandatory.
Conditions:
WCS 4.1.83. Status
Fixed
Gravity
4 minor
Last modification
In the last 2 weeks
Product
Cisco wireless control system
Technology
1 found-In
4.1 (83.0)
Fixed in
4.2 (26.0)
WCS information related Bug 4.1.83.0 tertiary controller requires fixed for AP
Symptom: WCS 4.1.83.0 with 3 or more linked WLC. Try to change the configuration of an access point, and if you do not have a defined tertiary you get an error saying that it is mandatory. Conditions: 4.1.83.0 with 3 or more WLC WCS related Workaround: define the secondary or primary as the tertiary
I hope this helps!
Rob
Tags: Cisco Wireless
Similar Questions
-
Remove the secondary controller and tertiary high availability for each access point
I want to remove secondary and tertiary sector controller of high availability for each access point. I have more than 900 APs associated with a Version of the WLC 8510 8.0.121.0 software. What is the best/better way to remove secondary and tertiary controller?
Or I can create a model first. We use version 2.2Hello
Easiest way:
Yes you can do this by using the first Cisco Infrastructure, you can create a Setup AP Lightweight model to specify the name of the PDC and the IP address and specify an empty value (choose the first empty option in the drop-down list) and 0.0.0.0 for the secondary and tertiary sector controllers. Then you can apply this model to the AP, and she must remove (virgins all) values for these fields.
Long way:
Yes there is no clean way to remove it from the CLI. you need to manually remove each on the AP.
Concerning
Remember messages useful rates
-
Unable to apply the model of WLAN to the controller through WCS
Unable to apply the model of WLAN to the controller through WCS
1 update your config all of your controllers of WCS. Go to configure---> controllers--> select all controllers.
2. in the drop-down "Select", choose "refresh the configuration from the controller and select 'Go'."
3. choose Delete therefore WCS will take the last setting of the WLC and select 'go '.
4. remove the WCS WLC.
5. Add WLC to WCS.
6 try to set up the model again.Also, you can upgrade to 6.0.170 as there are to many model feature bugs that have been fixed in this version.
http://www.Cisco.com/en/us/docs/wireless/WCS/release/notes/WCS_RN6_0_170.html#wp44440
-nael
-
Having an application that communicates with HP8510 & HP8720 NWA. Can I ask what kind of test set is connected, but how I ask not what model of GPIB-USB is connected? A model interface using 'A' requires some State read to complete, but the "HS" crashes (for what seems like the expiration time). If I comment out the code to read state, "HS" works very well. Sort programs NOR that come with 488.2 software can get all kinds of info on the controller. Please tell me the web/manual/whatever page that shows how to do this.
Thank you
Hello
The properties of all of the GPIB cards that you have connected to your computer are found in a GPIB.ini file. The location of this file may be different, based on the version of NOR-488. 2 you have. "" "" I have version 2.52 and on my system, it is located in C:"Documents and Settings" all users "Application Data" National Instruments "NOR-488. 2' gpib.ini. It is imporant to note that this file should not be changed under any circumstances, because it could cause a lot of problems able & Automation Explorer (MAX). Once you open this file, you can see under "BoardName" what Board GPIB is attributed to GPIB0, GPIB1 and so on. You can analyze programmatically then this file (in read-only mode) to see what card is connected to your instrument. Have a great day!
Kind regards
Todd v.
-
How to join a network domain with the controller rt PharLab running?
I have a PXI system that I would like to be able to access anywhere in the corporate network. Currently, I'm access via the IP address, but want to use the host name instead. Unfortunately, I couldn't find a way to join the network with the controller running PharLab area.
Any suggestions in this regard would be welcome.
Respect,
Česlav
Hello Bob and Česlav,
I think Česlav was looking for / ask something different. (please tell me if I'm wrong)
He really wants to do its PXI RT "look-uppable" via its corporate network without necessarily be on the same subnet (and use the IP address).
In light of the additional information you (Česlav) provide that I would say again that you contact your IT Department first to see how they prefer it.
They will generally the method of choice to do this. (both for desktop computers with respect to other devices)
Sometimes it comes down to add to "add your host name and IP address to a list of DNS.
The page that you link to is a specific way of Windows, adding yourself to a domain.
Note that add you to a domain should provide you with the ability to use host names.
However, he also did other things, which may not be possible or even allowed for other types of devices.
In most companies you don't even have your desktop admin rights necessary to add your own pc (following this way) to the area, as it may cause a lot of security issues and risks.
Because I don't really know what the establishment IT is by your side I can't really (with certainty) comment on what you should be able to do (and is not).
-
HP 15-d033se: can not find the controller video 3d, usb controller for my product
I need a controller 3d video and usb controller drivers please, I can not just them is for "hp 15-d033se.
and if there is that advice please explain
Hello:
In order to install the graphics for your laptop, you must:
1 install the Intel chipset driver and restart.
This package contains the utility to install Chipset Intel andDriver for notebook models and operating systems. Thisutility active operating system show the correct name for the Intel hardware installed in the DeviceManager of Microsoft's.
File name: sp64343.exe
2. install the Intel HD graphics driver and restart.
This package provides the driver that allows the IntelHigh-definition (HD) graphics in the models of laptops that arerunning an operating system supported. If the video output multimediainterface high definition (HDMI) is supported, this package alsoinstalls the HDMI Audio Driver.
File name: sp66213.exe
3. install the driver Nvidia graphics and restart (it is the one that actually installs the controller 3d video).
This package provides the driver that allows the NVIDIAHigh-definition (HD) graphics in the models of laptops that arerunning an operating system supported. If the video output multimediainterface high definition (HDMI) is supported, edia video output (HDMI) interface is compatible, this package also installs the driver HDMIAudio.
File name: sp64346.exe
USB3:
This package provides the driver for the Intel USB 3.0 controller host for the laptop models running a supported operating system. The driver allows USB 3.0 devices.
File name: sp64706.exe
-
Battery on the Controller PERC 6 / i integrated Poweredge R900 and 2950.
Hi, we have this error below Poweredge R900 and Poweredge 2950 for 4 days now, I hope that he will be gone after 7 days (such as by Maximum learning delay)
Battery on the Controller PERC 6 / i integrated:
Name battery 0
Degraded state
Loan of State capacity
Learn the State duly
Next time learn 0 hours
Learn 7 days 0 hours maximum
Learn the Auto ModeIn case the error continues after 7 days, is there any solution to this? or replace the battery if error remains.
I had been searching for the right part No. battery so that we can order in advance, thank you for giving the battery part No. for Poweredge R900 and 2950 Controller PERC 6 / i integrated.
Thank you much in advance.
concerning
Rais info is stored on the discs should not be a problem
R900 page 84 support.dell.com/.../XK9460D.pdf
2950 page 74 support.dell.com/.../hom.pdf
-
State of the controller H710P degraded, but pdisks and vdisks are OK
Hi, I have several PowerEdge servers R720 with Mini H710P (embedded) controllers and PERC H710P who have problems. Omreport, the controller is in a non-critical State and a degraded state:
Controller of
ID: 1
Status: No reviews
Name: PERC adapter H710P
Location ID: PCI Slot 2
State: degraded
Firmware version: 21.3.0 - 0009
Minimum Firmware Version: 21.3.1 - 0001
Driver version: 06.806.08.00 - rh3
The minimum required driver version: not Applicable
The Storport driver version: not Applicable
Minimum required: Version of the Storport driver: not Applicable
Number of connectors: 2
Regeneration rate: 30%
BGI rate: 30%
Consistency check rate: 30%
Rebuild rate: 30%
Alarm status: not applicable
Cluster mode: not Applicable
SCSI initiator ID: not Applicable
Cache memory size: 1024 MB
Patrol read mode: Auto
Patrol read status: stopped
Patrol read rate: 30%
Read the iterations of patrol: 42
Give up control of consistency error: disabled
Enable reversible hot spare and replace the: enabled
Load Balancing: not Applicable
Auto Member Replace on Predictive Failure: disabled
Redundant path view: not Applicable
CacheCade Capable: Yes
Persistent backup: disabled
Encryption Capable: Yes
Currently key encryption: No.
Encryption mode: no
Preserved cache: not Applicable
Spin down drives unconfigured: disabled
Turn down hot spares: disabled
Spin down drives configured: disabled
Automatic disk Power Saving (Idle_c): disabled
Start time (hh: mm): not Applicable
Time interval of rotating upward (in hours): not ApplicableVdisk is OK:
Controller PERC H710P adapter (Slot 2)
ID: 0
Status: Ok
Name: Virtual disk 0
Status: ready
Hot violated political alternatives: not
Encrypted: No.
Layout: RAID-5
Size: 3 350,25 GB (3597303545856 bytes)
T10 Protection Information status: No.
Liquid state of Cache associated with: not Applicable
Name of the device: / dev/sdc
Bus protocol: SAS
Media: HDD
Political reading: Adaptive Read Ahead
Political writing: write back
The cache policy: not Applicable
Stripe Element Size: 64 KB
The strategy of Disk Cache: disabledAnd so are the physical disks (output truncated, there are many records!):
ID: 0:2:7
Status: Ok
Name: Physical disk 0:2:7
Status: ready
Supply status: leader
Bus protocol: SAS
Media: HDD
Part of the Cache Pool: not Applicable
Remaining nominal write Endurance: not applicable
Predicted failure: No.
Review: LS0A
Driver version: not Applicable
Model number: not Applicable
T10 IP Capable: No.
Certified: Yes
Encryption Capable: No.
Encrypted: Not Applicable
Progress: Not Applicable
Mirror Set ID: Non Applicable
Capacity: 558,38 GB (599550590976 bytes)
RAID disk space used: 558,38 GB (599550590976 bytes)
Space disk RAID: 0.00 GB (0 bytes)
Hot spare: dedicated
Vendor ID: Dell (TM)
Product ID: ST600MM0006
Serial number: S0M4EMF4
Part No.: CN07YX587262251B0119A02
Negotiated speed: 6,00 Gbps
Measuring speed: 6,00 Gbps
PCIe negotiated link width: not Applicable
PCIe Maximum link width: not Applicable
Sector size: 512 b
The device's write cache: not Applicable
Date of manufacture: 03
Week of manufacture: 02
Manufacturing year: 2015
SAS address: 5000C5007F103929
Form factor: not available
Void Publisher: not availableI had found a previous thread which suggested updating the firmware, but I can't find a more recent version of the firmware for controllers (embedded or extra).
If it makes a difference, all servers running RHEL 6.6 (Santiago)
Lachlandehaas,
I think you are right in assuming that the problem is caused by the firmware being obsolete. The firmware is actually a few updates behind. You can find the latest version of the update here. Updated the fw on the controller and let me know if the VD shows ONLINE later.
Let me know what you see
-
DHCP option to set the controller IP for Access Points (Airespace)
Hello world.
Does anyone have an idea to specify the controller using DHCP options.
We use:
-Controller AIR-WLC4404-100-K9
-AP-1010-AP-5312 poinst access
-Server dhcp DHCPd ISC 3.0.1
Newspapers on DHCP server indicates that access points become the IP addresses, but the controller information are not "read" / "included".
In the productive environment, controllers will be redundant.
So far, we couldn't sucsessful with eighter of these configurations:
Block i. using VTL:
subnet 10.50.107.0 netmask 255.255.255.0 {}
option subnet-mask 255.255.255.0;
routers option 10.50.107.1;
option domain-name-servers 10.20.51.11, 10.20.51.12;
option vendor-class-identify Airespace 1200;
the option dhcp-client-identifier 0xf1, 8, 10.20.51.254, 10.20.51.249;
DDNS-updates
DDNS-rev-domainname "in - addr.arpa.";
DDNS-domain name "xxyy.local.";
default-lease-time 28800;
range 10.50.107.101 10.50.107.200;
}
II. using the DHCP Next-Server option:
subnet 10.50.107.0 netmask 255.255.255.0 {}
option subnet-mask 255.255.255.0;
routers option 10.50.107.1;
option domain-name-servers 10.20.51.11, 10.20.51.12;
Next-server 10.20.51.254;
III. use of Header Information Option 43 described such in DHCP Manual:
WLAN-apc code 60 option = text;
ip address wlan code option 43 = controller;
subnet 10.50.107.0 netmask 255.255.255.0 {}
option subnet-mask 255.255.255.0;
routers option 10.50.107.1;
option domain-name-servers 10.20.51.11, 10.20.51.12;
option wlan-apc "Airespace.AP1200"
option wlan controller - 10.20.51.254;
IV. using header to the DHCP server information:
class "-classes of suppliers ' {}
vendor-class-identifier option match; }
{"Airespace.AP1200" subclass "-classes of suppliers '}
Next-server 10.20.51.254;
}
Does anyone have a working (using the SAI?) configuration or advice?
Best regards
Jarle Steffensen
Yes, finally got it work.
I just followed this guide:
http://www.Cisco.com/univercd/CC/TD/doc/product/wireless/control/C44/DEP.PDF
and it worked the first time :)
-
Windows does not detect the controller Guitar Hero Explorer
Told me to repost this question into the Xbox forums. Unfortunately there is no category of material for Xbox so I put it in video Applications for lack of a better forum.http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-is-not-detecting-Guitar-Hero-Explorer/ff7bfae9-1ecb-4D2F-9134-e194e6cbfed3?TM=1392535709776&rtAction=1392692491927
"I have a Guitar Hero controller (Xplorer) to PC that I used with my laptop to play Guitar Hero 3 for many years. My laptop is Windows 7 64-bit. I recently bought a game also desktop computer now Win7 64-bit. While my Guitar Hero controller works fine on my laptop, the device is not recognized when I plug it on my desk. I installed controller Xbox found here, http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows accessories, but it made no difference. The device appears in the Device Manager with a suitable name, however, it is next to him yellow warning symbol and is not recognized as a game controller. I tried to let Windows Update search for the driver, but he found nothing.It seems that my laptop uses a driver of XNA framework as the path of the certificate is "C:\Users\Daniel\system32\drivers\xnacc.sys". Curiously, even though my laptop and the Office have the latest version of installed XNA, xnacc.sys does not exist on the desktop. Two of my systems are completely up to date. I also made sure that the USB port on my desktop that I plugged the controller worked in and fed.I would like to know how I can get the controller to work on my desk. »After a lot of nonsense, I found a solution.
(1) open the "Device Manager".(2) made the Guitar Hero controller right click Explore (even if it does not work correctly) and select "Properties".(3) Goto the tab "Driver" and click "Update Driver".4) click on "my computer for software driver the browser."5) click on "Let Me pick from a list of drivers on my computer" instead of navigation.(6) select something like 'Common Microsoft device', I don't have the option anymore, so I can't search for it.(7) a new models will be listed for the Xbox controllers, I chose "Xbox 360 Controller for Windows [2007-02-15].To check if his work type "game controllers" in the windows search bar and select "configure USB game controllers. The guitar hero controller should appear in the list if it is now recognized. -
A question about approval of the controller et al.?
I have authorized but WCS are licenses for Auditors and I need license? Also, what is a license for Wplus? and do I have one?
Thank you
Gary
Hi Gary,.
Licenses are applied on the WLC product line. With the 4400 series
of WLC license was directly related to the size of the controller which was
ordered and could not be set to day/upgrade to support a larger number
AP
That is to say;
4402 12 (could support 12-AP)
4402 25 (arguably 25 AP)
4404 100 (could support 100 AP)
The new 5500 series can be ordered with a base like 12 amount and
upgrade down the road via a new 'licence' to support 25,50,100 etc.
Cisco WirelessPLUS licenses
The optional wireless software MORE supports the mesh wireless Cisco OfficeExtend solution and the company.Cisco 5500 Series licenses wireless controller and
Guide commandhttp://www.com-1.de/IMG/products/PDF/677E933.PDF
Control system wireless Cisco (WCS) licenses and orders Guide
See you soon!
Rob
Thank you to support CSC helps Haiti
-
How to assign static ip to 1131AG Lightweight Access Point before register you for the controller
Hello
I have controller Wireless LAN that is installed at the head office, we have allowed H-harvest so that the remote access can be registered with headquarters controller.
Now, I have an access point to one of the remote site now, I want to give a static IP address to the AP through that console too, before saving the controller.
I have the console with sub name:
...... MAC address... >
But if I type any command to assign the IP address, it displays the error "command disabled."
I join calrification details.
I know that I can connect to this access point to the headquarters LAN and registered with WLC and then via WLC GUI, I can assign static IP address, but I need solution to assign a static until you save to WLC IP not.
I will be obliged if I get a solution
Hi Vinod,
problem solved?
Concerning
Surendra
Please do not forget to note the useful messages...
-
I started getting the following error message:
Log name: SystemSource: atapiDate: 16/03/2013 18:36:37Event ID: 11Task category: noLevel: errorKeywords: ClassicUser: n/aComputer: Sanja-PCDescription:The driver has detected an error of the controller on \Device\Ide\IdePort4.The event XML:11 2 0 0 x 80000000000000 169902 System Sanja-PC \Device\Ide\IdePort40000100001000000000000000B0004C002000000850100C00000000000000000000000000000000003000000000000000000000004100000 The last time I had this error was for malware using ESET secruit security check. During which I got like 11 errors with event ID 11 in the observer diary of events. Next, I had warnings of ntfs with event ID: 57:Log name: SystemSource: NtfsDate: 16/03/2013-17:24:11Event ID: 57Task category: (2)Level: WARNINGKeywords: ClassicUser: n/aComputer: Sanja-PCDescription:The system failed to flush the data in the transaction log. Corruption may occur.The event XML:57 3 2 0 x 80000000000000 169876 System Sanja-PC 0000000001000000020000003900048000000000850100C 000000000000000000000000000000000 The system works fine, no freezes or crashes, but I would like to know what is the cause, is it hardware or driver related?Hello
Thank you for contacting Microsoft Community.Since you don't face any problem while working, the system works very well. The error in the log occurred due to the error of the driver in this case. But immediately, Windows is taking measures to restore the driver, so that the system works very well. The journal entry is just a notification. During the scan, the higher the use of the disc, so the number of failures is likely to increase. It occurs even in situations where there is a transfer of files. -
Deploy the controller on R12.2.4 class
My page seems to be unable to find the controller class. It generates this error:
oracle.apps.fnd.framework.OAException: could not create Java class: (oracle.apps.xxmap.webui.LockboxUploadCO) associated with the area: (MainRN). It is probably because the class name is incorrect or not included in the project.
The class file is here:
ls-l $JAVA_TOP/oracle/apps/xxmap/webui/LockboxUploadCO.class
-rw-rw-r - 1 jaustin sadmin 4119 6 Oct 11:57 /oracle/apps/fs1/EBSapps/comn/java/classes/oracle/apps/xxmap/webui/LockboxUploadCO.class
I can also run the class on the command line with the apps environment loaded with "java oracle.apps.xxmap.webui.LockboxUploadCO".
I tried to restart the server. There is another necessary step in additional to copy the class in place? That's all it seems to be in the developer manual.
Hello
Stages of deployment in R12.2.4 is different. It will search the Jar files not the Java files. Also, according to the oracle standard, you must use your folder as xxmps.oracle.apps structure.
If you use oracle.apps.xxmap, you may need to change your standard admin for weblogic server can read your file from the server.
Please go through the below in detail, and let me know any questions.
Deployment of customizations in Oracle E-Business Suite Release 12.2 (1577661.1)
Thank you
Bharat
-
Property URI ImageBean to the controller
Hello
I need deleteicon_enabled.gif the image, the URI of the image property value in the controller
Please tell me the name of the method.
Thank youSatya
Instead of setting the source of the image. Create two images in a single column of advanced table and by using PPR try to render a bean at a time given time.
Let me know if you encounter any problems with this approach.
Thank you
AJ
Maybe you are looking for
-
The Blu - ray disc reader driver update
I get Tempro-messages that I should update my driver disc Blue-ray (bluraydp-20130117155646) drive. I tried to install it several times but each time I get this error message: "Patch Project - Install Shield Wizard: Build version of the source is not
-
Hello I am looking to buy the new Apple TV but can't find anything on my 2012 LG Smart TV and the way he does (or does not) work with Apple TV. Anyone here have experience with this? Someone told me that I would have to "prison break" the Apple TV so
-
Office Jet 7612: Scan of the computer does not work after you win 10 improvement
One of my clients has an officejet 7612 and has improved to win 10 to win 8 and lost the "Scan to PC" features themselves the printer he used for years to create his PDF files. Print and scan drivers seem to work to scan and print from the computer t
-
I want to restore my laptop!
Help! I want to restore my laptop to its first used condition, how can I do this?
-
Windows Media Player won't find the files on the second hard drive
Hi hope you can help with this. I have Windows 7 and Windows Media Player 12 on my PC. My office has two hard drives, one for the operating system and all programs and another larger (drive J:\) for all my files. All my audio files are stored in the