HP K5400 - network.

Similar Questions

• HP officejet pro k5400 print hieroglyphics from my computer windows 7 when network attached so

  my HP officejet Pro K5400 to print hieroglyphics from my computer windows 7 - both when attached USB or Network attached.

  It was printing fine before when network.  has taken a different and trendy site via USB and has not printed correctly since.  Printing a test page for the printer itself works fine.

  Help.

  It's strange.  The driver may be corrupted.  Try using a different printer driver.  You can find the instructions below. Let me know what happens.

  1. Click on the start menu.
  2. Click devices and printers.
  3. Right click on your printer.
  4. Select the properties of the printer.
  5. Click the Advanced tab.
  6. Click new driver.
  7. Click Next.
  8. Select HP in the first list.
  9. Select Deskjet 990c in the second.  If the 990c driver is not there, use the Deskjet 450 driver.
  10. Click Next.
  11. Click Finish.
  12. Click on apply.
  13. Click OK to close the window.

• Connected to the wired network HPOJ Pro k5400 won't work with Win7x64 PCs but works with a PC Vistax64

  I can't get my wired Ethernet network HPOJ Pro k5400 work with Win7x64 PCs. The printer is correct because it works well with a PC Vistax64. The symptom of the problem is that the first page (or two if duplex) prints OK, but after that, the printer "freezes" and is no longer prints. The power lights and resume both blink simultaneously. The Red print cartridge lights permanently. Turn off the printer and then resets.

  To solve the problem I deleted the printer since the Win7 PC and re-installed, manually and automatically choose the driver. Also, I searched the web without success.

  Any ideas?

  Hello

  Try to select the HP Deskjet 6940 / 6980 as another pilot and check if what it contributes,.

  If you don't find the listed model he wil appear after clicking on Windows Update.

  For duplex printing it can be disabled by default, enter the printer properties > device settings and make sure that the duplexer is set to installed.

  Shlomi

• FIC Ip HP Officejet Pro K5400

  I'm helping friends with their HP Officejet Pro K5400, which is connected to a router that cannot use fixed IP addresses. Is it possible to set up a fixed IP with the printer?

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can change the DHCP of the router range using its internal settings page.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Officejet Pro K5400 printer - no solution center or equivalent on MAC

  I have a new iMac running OS x 10.9.3. During the process the K5400 printer in network has been found, drivers downloaded and everything seems to work fine. However there is no center of Solution being present on my Windows system, and if there is a HP Applications folder on my Mac, I can't find. I used the Solutiuon Center to check the ink level and other things.

  Question: is there a center of Solution for Mac and if is not there and equivalent and if not (one might wonder why not!) How to find things on this printer from my Mac, not having to go to the porinter in another part of the building.

  Thank you in advance for an answer!

  I found the answer to this problem, I asked. Apologies for experienced Mac users who I am sure that already know such things, but as a new convert Windows I don't have and this info can be useful similar folk.

  Click on Preferences system-> printers and Scanners-> the listed HP printer you want information on-> them status will take you to a set of options that will do everything that was available in the HP Windows solution Center.

  It is excellent and can work for another fact of printer--I know I do not have!

• Mini iPad won't find new wifi network

  Recently, we got a new router and each of our devices picked up the network very well except for my ipad. When you go into the wifi settings it shows no network at all.

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo.

  It may take 30 seconds

  See you soon

  Brian

  PS make sure that its not on airplane mode.

• I changed internet service providers and my phone and I have pad connected to the network of again very well, but my Apple TV not!... of ideas?

  MY Apple TV will not pick up wi fi network

  Can you elaborate?

• How can I connect to a wifi network when I get the message 'safety recommendation' when I try to join?

  I have problems connecting to the WiFi at the hotel, as I have upgraded to iOS 10. When I try to join, I get a message "safety recommendation", and then it does nothing else. Prior to the update of the iOS, it would open an another Popup screen that lets me enter the password for the hotel but is not past with iOS 10. How do go?

  Please read use captives Wi - Fi networks on your iPhone, iPad or iPod touch - Apple Support.

  You may need to deselect Auto-Join and/or auto-connect on some networks in captivity. Otherwise, it may seem to connect for a second or two, only to disconnect immediately, leaving you without the possibility to open a session.

• iPad connects to the network, is unable to connect to Internet

  Received my new iPad. Automatically, it connects to my home network but does not connect to the Internet. I rebooted the router and the iPad, but the same thing. Same problem with the old iPad. That is what it is?

  Hello. When you go into settings > WiFi and tap the current network, that see you the IP address and other network settings, or they are all empty? You use DHCP to configure?

• 6 ios10.0.2 iPhone no service/network?

  IPhone 6

  IOS 10.0.2

  16GB

  After that I updated the version of iOS to the latest version from 9 to 10 and 10.0.2 I couldn't get any service in the phone

  no service

  No network

  I tried all the solutions, but did not successfully

  pls help

  Ymah995 wrote:

  IPhone 6

  IOS 10.0.2

  16GB

  After that I updated the version of iOS to the latest version from 9 to 10 and 10.0.2 I couldn't get any service in the phone

  no service

  No network

  I tried all the solutions, but did not successfully

  pls help

  If you do not have cellular service on your phone, then you contact your phone provider and let them know that you can't get their service on your phone.

• Bluetooth network is not available

  Been trying for a while to use AirDrop on my MacBook Pro (Version OS X El Capitan 10.11.6) and my iPhone 6 s more.

  Just realized today that it might not work because the Bluetooth on the Pro does not work. With each device I try a pairing, it says that the network is not available and that I need to make sure that network access is enabled. Trying to do this, system preferences > network > Bluetooth PAN, I get the same message. I need you to ensure that network access is enabled.

  Someone else had this problem? Any ideas on how to solve it?

  Open system preferences > Bluetooth. Make sure that Bluetooth is enabled.

• Airport Express, Time Capsule and Airport Express using the same network

  Just moved into a new House and this is what I install.  I have 7 Port wired into the House.

  Closet of network in the Garage:

  • Cable modem
  • Airport Express
  • netgear switch 8 ports
  • It works pretty well.  All my wired connections work fine.  Wireless is quite good but cove not enough of space in my house.

  Think about adding my airport express capsule of time in my office - plugged into one of the hard wired connections.  Who works AND let me wish the WIFI?

  Thank you!

  Yes fine, assuming that first test you the Ethernet port in the office by connecting a computer (with WIFI disabled on the computer) using a spare Ethernet cable runs to ensure that the computer can get a good connection in this way.

  Put the airport Time Capsule to create a wireless network that uses the exact same wireless network name and password in your existing network. Apple installation "Wizard" automatically configure airport Time Capsule in the correct setting of the Bridge Mode for the device.

• Tips to add a VPN router to my current network configuration

  Dear all

  My apologies if the answer to this question already exists, however, I searched in many situations and none seem to match what I'm after.

  I currently have an ISP modem/router in Bridge mode connected to a TC of Apple which is my wireless router, I have 2 Express airport connected to this acting as the extensors of the range.  I have a VPN service through the MyPrivate network I activate on the desired device when required and everything works fine.

  What I want to do now is to be able to use my AppleTV and burning Amazon via the VPN as well so you need to add a VPN router in the configuration.  I want to finish with 2 wireless networks running together for these devices who need VPN and those who are not.  I don't want to lose the opportunity to extend the network to express it however airport.

  If someone could explain to me if this is possible and if so how do I set up the network.

  Thanks in advance

  Mark

  Basically you would need a device that supports VPN-passthrough and VLANS for your goals of networking. MyPrivate network, seems to be a VPN SSL, which is a user-server configuration. In other words, you install a client VPN on your Mac and you connect to the VPN network MyPrivate server to establish a VPN tunnel.

  Networking two or more "separated", should be using a router that supports VLAN services. Each segment of VIRTUAL local area network, in essence, would be a separate, she either wired or wireless network or a combination of both. This would probably be the 'easiest' part for the installation program.

  Now how combining the two would be the question, and I don't know what would be the best way, or even if it is possible.

  A few thoughts:

  • Use a router that supports VLANS. Create at least two VIRTUAL LAN segments. One for Apple TV & Burns, one for Internet access in general. Connect the device to VPN client host on the first segment, and configure for Internet sharing.
  • Download a dedicated VPN network application that supports hosting of third-party VPN clients, like yours. You would still need a router that supports VLAN to provided separate network segments.
  • Hire a consultant network. Let them know what you the goals of networking and ask them to offer potential solutions.

• How can I add a password to an existing network of the time capsule?

  How can I add a password to an existing network of the time capsule?

  I guess you mean that time Capsule has already been configured to provide a signal of wireless network, correct?

  Do you mean that the network has no password at all right now... or... do you mean that the network has an existing password, but you want to change the password?

  What operating system are you using on the iMac that you list in your profile?

• App, networking, process cloud runaways; Very slow to connect to servers, high fan

  I have the same problem on two different computers. A new installation (of Sierra of MacOS) (with costs users, no restored settings, preferences, etc.) fixed, but not the other. (Past the wire: all Web apps suddenly slow; fan high speed).

  On the computer that still does not, have the following processes often rampant and prevents the computer access to the servers to load pages, apps, etc..

  • trustd
  • Mail
  • messaging networks
  • Safari
  • Networking of Safari
  • storeaccountd
  • AKD
  • accountsd
  • nsurlstoraged
  • nsurlsessiond
  • syncdefsultsd
  • cloudd
  • com.apple.CommerceKit.transactionservice

  Obviously the issue transcends the user the user and settings (because it affects the settings and new users).

  So I guess that it is a problem with iCloud? A question of trousseau (iCloud)? How to fix this?

  I am VERY interested in any orientation.

  I just tried these steps recommended for new users of macOS with wifi problems: http://osxdaily.com/2016/09/22/fix-wi-fi-problems-macos-sierra/

  The problem persists.