I changed internet service providers and my phone and I have pad connected to the network of again very well, but my Apple TV not!... of ideas?

MY Apple TV will not pick up wi fi network

Can you elaborate?

Tags: Apple TV

Similar Questions

  • I recently changed internet service providers and now my Wired desktop can't connect to the internet.

    I recently changed internet service providers and now my Wired desktop can't connect to the internet.  I noticed that the connection is showing 'Automatic private address' can I connect all my fine wireless devices.  I did extensive troubleshooting with my service provider, but they suggest that my master's degree network adapter must be replaced.  I updated the driver, and the device manager says it's working properly. If I connect the same wire for my laptop, it works fine.  This is just my office.  Any ideas how can I fix?

    Hello

    Follow the steps in the KB article below and see if that fixes the problem.

    How to troubleshoot possible causes of Internet connection problems in Windows XP
    http://support.Microsoft.com/kb/314095

  • What is my password? : I recently changed internet service providers and now find that my email account by default for send/receive of my former internet service provider

    I recently changed internet service providers and now find that my email account by default for send/receive of my old internet service provider. When I try to change it, it asks me a password and I don't know what it is?

    How can I find what you and make the changes I need to do?

    Your help is greatly appreciated.

    Wendy

    For the details of your e-mail account, contact your ISP (Internet Service Provider).

    Here's how to set up Windows Mail:

    http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

    Link above has an easy to follow Guide to set up Windows Mail.

    Contact your ISP (Internet Service Provider).

    They offer your broad band/Dial-up connection.

    Ask them to:

    username
    password for your service account to wide band/Dial-Up with them

    Server of incoming POP3 mail
    outgoing mail SMTP server

    The above information is required to set up Windows Mail.

    ISPS are usually happy to help you set up your email account.

    See you soon.

    .

    Mick Murphy - Microsoft partner

  • I can go to the internet and all, but on the icon say "NOT CONNECTED" and I tried to connect to the network for 2 weeks already... its still not not workin... Please help!

    I tried to connect to the network several times but its still saying 'not connected' but I can go to the internet and all...
    and I also try to fix or diagnose, but its still not not workin...
    Please help idk what 2 do more...

    Hello

    Good luck, you need technical support for a real computer store or system manufacturer is supported.

    Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
    Update your WiFi drivers on computers. How you are positioned in the router? Are there
    obstacles in the path?

    Actually try updating your driver and disabling the network logon. You can download these on another
    computer if you need to and transfer on removable media.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

    I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

    Hello Lauren,

    Please take a look at this Microsoft article on "networked printer troubleshooting:
    I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  • Profile deleted network-, but my computer thinks it still exists and I can't connect to the network at all.

    I had problems connecting to my wireless home network.  It always gave me the error that the network stored on my computer (relevant for my home network) profile did not have the correct network settings.  I couldn't find a way to solve the problem, so I just deleted the profile, in the hope that in trying to reconnect, my computer would automatically detect the appropriate settings.

    Now when I try to connect, I always gives me the same error (that the relevant profile has bad network settings) even if the profile has been deleted.  My computer asks me if I want to open the network profile to check its settings.  If I hit Yes, I gives me another error (because there is in fact no longer the profile).

    I'm running Vista Basic and I have problems connecting to other networks (without thread or hard line).

    Any help is greatly appreciated, thank you-

    Hello

    First of all, make sure that if there's Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    Also, make sure firewall No. preventing / blocks wireless components to join the network.

    Look at the wireless management screen, and then remove the entry from your wireless network.

    http://www.ezlan.NET/Vista/wireless_manager.jpg (Control Panel, network and sharing Center. Upper-left click Manage wireless networks.

    After the form of own connection, wireless tray bar icon.

    Given that your wireless network is more in the preferred list, it will prompt for the password. Put the password that is current, and if all goes well it will connect.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • I changed administration of name and password, unable to connect at the back with new password.

    I changed my given name and password, how can I fix the problem?  I can no longer connect new password to my new account administration.

    http://support.Microsoft.com/default.aspx/KB/940765/en-us

    How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account.

    As you know your old password, read the above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/189126

    "Microsoft's strategy concerning lost or forgotten passwords"

    Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

    Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

    See you soon.

    Mick Murphy - Microsoft partner

  • Problem loading in outlook express after changing Internet service providers.

    I have recently switch from Verizon to Comcast internet providers.  Since I had problems loading in outlook express.  One in a blue moon, it will actually connect, but more often than not, it does nothing.  It loads in the taskbar upwards and the titles of the mailbox, but if it connects, you can't do anything.  Help I am getting very frustrated.

    I don't know why the change of operator would make a difference. When it finally connects, you get mail?

    Make sure that your settings are correct and that your Verizon account has been deleted.

    How can I set up/configure Outlook Express, Windows Mail & Windows Live Mail to E-mail from Comcast?
    http://www.Comcast.com/customers/FAQ/FaqDetails.ashx?ID=2288

    Then work on these steps.

    1: create a new Folders.dbx file.

    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

    A new Folders.dbx file will be created when you open OE. Note these possible side effects:

    When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. Please understand that you will lose the mail directory structure, all the discussion lists and all synchronization options and message rules will probably have to be edited.

    2: do not archive mail in the receipt or sent items box.  Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095

    3: after you're done, followed by compacting your folders manually while working * off * and do it often.

    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

    3: disable e-mail scanning in your anti-virus program.  It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    For some programs, turning it off is not enough. You may need to uninstall and reinstall in custom Mode and remove the analysis when e-mail messages.

    If all else fails, try a new identity.

    You may have a damaged identity especially if it's the default main identity. File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

    Note: Do not use the main word in the name of the new identity.

    How to create and use identities in Outlook Express
    http://support.Microsoft.com/?kbid=209169

    An Outlook Express basic repair kit
    http://www.Microsoft.com/Windows/IE/community/columns/oerepair.mspx#ehh

    Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • Encoding and the work of converting very well, but won't burn to dvd?

    Hello, I tried many suggestions as well as procedures standard to try to solve my problem, but my dvd will not burn again :(

    This (assuming) started after my wife somehow deleted my user account from the computer (HP dv6704 nr laptop), I put a blank disc in as usual (after redo my user account with all the links, etc.) and conversion went well and is attesting that burn is 'Excellent' or well ya know, tried it with my fav ConvertXtodvd as well as factory Windows Movie Maker and says 'burn is good. " , but nothing to do? It is the first time that I had a problem in 3 or 4 years procedures. I tried deleting the upper/lower case filters, startup repair, remove to let drivers update automatic, changed versions of the burner that I use in case of default, etc etc...

    I don't know there is something simple that miss me that the cd take very well, please help someone?

    Using CCCP codecs (although convertX has no need of em) and threw a po filter AC3... uh, running VISTA HOME PREMIUM (came installed) and the burner is a TSSTcorp CDDVDW TS - 632N ATA Device.

    Someone help me please, my little ones like the video I do em, and I do too :)

    Hi jedjoe24,

    ·          You receive an error message when burning?

    When you try to burn videos or movie from Director of Windows, use Windows DVD maker to burn to DVD.

    Method 1

    Uninstall any third-party DVD burning software installed on the computer and try to burn.

    Method 2

    You can try to reduce the burn speed and check.

    1. open Windows DVD Maker.

    2. on the page, share your memories on a DVD , click on choose of pictures and videos.

    3. in the Add pictures and video to the DVD page, click Options.

    You can change the following settings in the dialog box Options of DVD :

    ·          DVD burning speed. This option allows you to select the speed to burn your DVD. The default choice for this option is faster. Some DVD burners won't burn at full speed using some types of DVD. If you have problems burning discs, try selecting medium or slow.

    Change Windows DVD Maker DVD-Video settings

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

    Method 3

    Make sure that the DVD burner is properly connected to your computer and powered, and that all the necessary software drivers for the DVD burner are installed. You can check your hardware settings in Device Manager by following these steps:

    1. click on Startand then click Control Panel.

    2. click on hardware and sound.

    3. click on Device Manager.

    Make sure that the video you are trying to burn are not damaged. To see whether the videos you want to burn are corrupted, try playing or viewing with Windows Media Player. If the files do not play with the player, Windows DVD Maker cannot burn.

    Solve problems with creating a DVD-video using Windows DVD creation

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • SER has changed Internet service providers

    I'm known by my name and one for Adobe < isp (Qwest.net) that no longer exists.  Today I installed Adobe Web Premium 5.5 at the end of the install, it says to ´read your identification email´for for discussion of adobe groups.  Since this email address [email protected] no longer exists, I'm going to Miss activation > online help URL.

    I CAN´t change to the correct IPS as I apparently a second ID I know very little about.  How SUPPORT can fix my ID crossed and me with a single account?

    You must call the phone support. Nothing anyone here can do.

    Mylenium

  • How can I optimize my Internet settings for BSNL (Bharat Sanchar Nigam Limited), the Indian Government Internet service provider and make sure at the same time?

    I would like to know how to optimize my Internet settings for the Indian Government Internet service provider and have a safe browsing experience.
    Hello
     
    How to optimize Internet Explorer: http://support.microsoft.com/kb/936213
     
    Hope you will find many answers to your questions in this article: http://windows.microsoft.com/en-US/windows-vista/Why-is-my-Internet-connection-so-slow
     
    To secure your internet connection, install a security software on the computer.
    Introduction to security and computer security: http://windows.microsoft.com/en-us/windows7/Understanding-security-and-safe-computing
     
    Many internet settings are controlled by the Internet (ISP) Service provider. Therefore, more support on that, you can get in contact with the service provider at any time.
     
    I hope this helps.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.
  • Monitor the quality of my Internet service provider and document the results.

    OT: ping.

    I am trying to monitor the quality of my Internet service provider and to document the results.   I would like to create a ping file during the execution of the order would send ping results to the screen and a file.   I ran the file whenever the computer is turned on.  The batch file must run continuously until interrupted and view the results of ping on the screen without the statistics, and it looks something like:

    Reply from 173.194.115.4: bytes = 32 time = 19ms TTL = 52

    Reply from 173.194.115.4: bytes = 32 time = 17ms TTL = 52

    Reply from 173.194.115.4: bytes = 32 time = 12ms TTL = 52

    Request timed out.

    Reply from 173.194.115.4: bytes = 32 time = 25 ms TTL = 52

    Reply from 173.194.115.4: bytes = 32 time = 191ms TTL = 52

    ...

    In the file, it should write the results and look like:

    Wednesday, December 2, 2015 9:30:34.02 response from 173.194.115.4: bytes = 32 time = 19ms TTL = 52
    Wednesday, December 2, 2015 9:30:34.58 request has expired.

    ...

    The batch file should display the results of ping on the screen.

    In the file, it should write the results and look like:

    It is one or the other: write the result on the screen or write to a file.

    It seems that you forgot to ask a question. If you want to know how to do such a thing, so this batch file would do the trick. It will write the result in the desktop Ping.txt file.

    off @echo
    Set IP = 173.194.115.4
    value = Write date % echo %%d time % > ^ > '% UserProfile%\Desktop\Ping.txt '.

    : Loop
    for /F "delims =" % in (' ping-n 1% IP % ^ | findstr /i "demand response" ' "") do write %
    Timeout 5 > zero
    GoTo loop

  • My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

    Original title: fix problem 'local only' what is wireless.
     
    -My computer is a HP Pavilion dv5, running windows vista edition Home premium

    -My computer can identify and access the internet when connected to the network through a cable.

    -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
    -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
    -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
    -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
    S ' Please, I'm desperate and in urgent need of help.

    Hello

    1. If it works well before?

    2 have you made any changes to the computer before the show?

    Method 1:

    You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
    http://support.Microsoft.com/kb/928152

    Method 2: Uninstall and reinstall the network adapter drivers.

    Follow the steps mentioned.

    (a) click Start, right click on computer.
    (b) click on properties, click on Device Manager
    (c) expand the network card, right-click the wireless adapter option
    (d) click on uninstall
    (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

    Follow the below mentioned article:
    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • I have a Dell Inspiron N4110 and it says im connected to the internet, but I can't actually open things, what should I do?

    I have a Dell Inspiron N4110 and it tells me im connected to the inernet but I can't go online and for some programs, like steam for example, says that I have to connect to the internet. the only thing that I can open is Windows 64 bit, but I can't really do anything. When I try to do a syestem restore it tells me disk error C. Then I do a check disk. but that tells me error and do a system restore. Please help me boy Im only A 14 year HELP!

    -Thank you

    Cam

    Hello Cam,

    Welcome to the Microsoft community.

    I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    ·         What is the exact error message you get on the computer?

    ·         Were there any changes made on the computer before the show?

    Follow these methods and check if that helps:

    Method 1:

    Step 1:

    Check if you have the similar problem in safe mode with network, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:

    Start your computer in safe mode with networking

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

     

    Step 2:

    Follow the article to perform the clean boot on the computer:

    How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/929135

    Warning: After using the boot is a way to solve your problem step 3 follow-up to reset the computer to start as usual.

    Method 2:

    I suggest you to optimize Windows 7 for better performance and check if it helps

    Optimize Windows 7 for better performance

    http://Windows.Microsoft.com/en-in/Windows7/optimize-Windows-7-for-better-performance

    Please follow all the steps and if the problem persists, return back and we will be happy to help you.

  • I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

    I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

    Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

    You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

    Use iTunes to restore your device to factory settings - Support Apple iOS

    If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

    copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

Maybe you are looking for