HP LaserJet 1536dnf do not meet some incoming fax calls

Similar Questions

• Fax does not recognize the incoming fax signal

  Fax does not recognize the incoming fax on Officejet 6700.

  Hey Bills6700,

  Welcome to the HP Forums!

  To not recognize the incoming faxes, I've included the document "cannot send or receive faxes. I know that's not the exact error message you get, but the steps will always help you.

  If you are still having the same problem after troubleshooting, could you please answer the following questions.

  1 is on a dedicated phone line fax machine, or is it shared with another phone?
  2. are you using a separator, or is plugged directly into the phone jack fax line?
  3. the phone cord is plugged you need two wires of copper at the end?
  4. do nothing missing on the fax test report?
  5. do you have an answering machine (physical box), or voicemail (you must call to access your messages)?
  6. What is the rings before answer on?

  Please let me know the results for the troubleshooting steps.

  Thank you.

• OfficeJet Pro 8620: officejet pro will not automatically print incoming faxes & answer

  I have a brand new Pro of Officejet 8620.   When I receive incoming faxes, I must be at the printer to press the ACCEPT button on the LCD screen.  I put the printer/fax AUTO ANSWER.    It did not work.  Any suggestions on how to have the unit automaticlly answer & print incoming faxes without having to be in the machine when machiines phone line rings.   I put the machine to meet Telec.  It is not set to meet incoming voice communication.

  Thank you for your informative reply!  PROBLEM SOLVED.  I was able to access the HP phone support people yesterday afternoon.  They very kindly put me through many of the steps you mentioned, that didn't work.  Finally the second support officer who got me the steps I have press the RESET button in THE SETTINGS on the LCD screen by DEFAULT and immediately after this step, solved the problem.

  My suspicion is that the machine, although that brand new, was in fact a refurbished machine sent to me by HP to replace the original purchase, which had a LCD screen showing only Chinese language that could not be changed.

  The replacement machine probably had been implemented at the different use of mine.

  Thanks to the lady who finally suggested hit the RESET button to THE DEFAULT SETTINGS as well as other people who responded!

  Everything is fine!      Aaron

• Want 7640: my fax does not automatically accept incoming faxes

  I've just set up my new printer. Although my fax is configured to accept incoming faxes, he can't get them automatically. If physically, I press the button "I agree", the fax will come through. I checked my settings to make sure that I put it correctly to respond automatically, but it will not. What I am doing wrong?

  Thanks in advance, Tracey

  Hi Tracey,

  First of all make sure that the phone cable is connected to the port 1 on the back of the printer and not badly connected to the port 2EXT line.

  Then click Fax, and then click the icon or settings button.

  Select Preferences, then select auto answer and make sure that it is set to.

  By the same preferences menu Select a distinctive ring and make sure it is defined as all the rings.

  Now follow and verify if the fax automatically accept incoming faxes.

  Shlomi

• 7640 envy: Envy 7640 fax passes but does not answer an incoming fax

  Passes the test fax setup but doesn't answer incoming fax

  Hi @Charlcar1,

• MFP HP Laserjet 1536dnf will not scan

  I logged in earlier and for some reason, the only thing that doesn't work is the scanning. Printing documents and using the copy feature works very well. When I try to scan, it seems to get ever before it cannot communicate with the scanner and to restart and check firewall settings that have not changed and I checked several times displays an error message. Using of Toshiba laptop running Windows 7 64 bit

  He was happy.

• HP Laserjet pro P1606 does not print some pdf documents

  My HP laserjet P1606 does not print some pdf documents.  It is connected via USB to my imac (OS 10.7.5; Adobe Reader 9.5.5). My wireless HP Photosmart 6520 has no problem printing my pdf docs.   Not sure why some files pdf is able to print on the P1606 and others not.  All solutions?

  Hi @JL_MAC,.

  I understand that you are not able to print all the PDFs of the HP Laserjet P1606dn, but can the Photosmart 6520. I can help you with this.

  Run all the updates to Adobe Reader to see if that helps. The latest version is 11.0.

  It could be a problem with the language of the printer.

  The Laserjet P1606dn printer is failed and the printer Photosmart 6520 PCL3 GUI language.

  I hope this helps.

  Good day!
  Thank you.

• How to listen to the incoming/outgoing call events?

  I am using the phone interface and the onCallUpdated method, but the id does not work on incoming/outgoing calls.

  Are there examples of code or something else?

  It has:

  access_phone
  

  Try and tell me if it works.

• 7 Windows fax and scan-error message "incoming call cannot be answered as a fax call.

  I use a U.S. Robotics 56 K Fax Modem model 5686 G v.92 and when a fax is sent it tells me that the call has been answered as a fax call and then during treatment, I get "incoming call cannot be answered as a fax call.  I've been working on this for 3 days now and just can't seem to get this point.  Any suggestions would be greatly appreciated.

  Hey Joe,

  You must ensure that your computer (or your external fax modem) is connected to an analog phone line, and that the phone line has a dial tone so that you can place and receive phone or fax calls.

  Method 1:

  Turn on send and receive options for a modem

  
  
  Check the modem settings to see if send and receive options are turned on.

  Turn on send and receive options for a modem

  1. click the Windows Start button, click all programs and then click Windows Fax and Scan.

  2. to use the fax at the bottom of the left pane, click Fax.

  3. click on the Tools menu and then click fax settings. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. click the general tab and then, under device name, make sure that the modem is selected.

  5. under send/receive options, make sure that allow it the device to send faxes check box is selected.

  6 make sure that allow it the device to receive fax calls check box is selected, and then choose how to receive faxes:

  * To answer phone calls as incoming fax calls manually by using Windows Fax and Scan, click on manually answer, and then click OK.

  * To have Windows automatically answer phone calls as incoming fax calls, click on answer automatically after X rings, select the number of rings after which Windows can try to answer phone calls as incoming fax calls, and then click OK.

  If someone else set up the computer to send and receive faxes, you might not have permission to use the built-in or external fax modem.

  Method 2:

  
  

  Give all users permission to send and receive faxes

  1. click the Windows Start button, click all programs and then click Windows Fax and Scan.

  2. to use the fax at the bottom of the left pane, click Fax.

  3. click on the Tools menu and then click fax settings. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. click on the Security tab and then, in the names box, any user or group, click everyone.

  5. in the permissions for everyone box, select the check box allow next to permission to Fax and then click OK.

  For more information, access the link below

  The problems of fax (valid also for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems#EJBAC

  Additional information:

  Configure your computer to send and receive faxes

  http://Windows.Microsoft.com/en-us/Windows7/set-up-your-computer-to-send-and-receive-faxes

  Fax and scan Windows

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan

  Fax: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/faxing-frequently-asked-questions

  Please post back with the State of the question and we will be happy to help you.

• Multifunction HP LaserJet 1536dnf printers: Scanner function not accessible after upgrade to Windows 10

  Function non-contactable on printers MFP HP LaserJet 1536dnf of analysis after the upgrade to Windows 10.

  Here is the error message:

  

  I recycled the printer... inaccessible even

  I recycled the router and the printer... inaccessible even

  Worked fine before with Norton and Windows Firewall enabled on Windows 7.  so...

  I have disabled the Windows Firewall (but not Norton firewall)... inaccessible even

  I ran "SCF/scannow' with the command prompt... inaccessible even

  I ran HP Print doctor who says that the scanning software was not installed.

  I tried to download and install the software the complete solution... masse not installed properly... even inaccessible.

  Help, please

  HALLALUJAH!  Now, I can scan, fax and print.  I did not follow the directions of RnRMusicMan together.  I just deleted all the HP software that had to do with print and then installed the suggested software.  I do not close the firewall or do any of the other suggestions.  Other people with the same problem may have to follow all the indications made by RnRMusicMan above.  RnRMusicMan, THANK YOU for giving me the link for the correct HP software to solve the problem, HP LaserJet full feature software and driver.   Without your help, I would have not a scanner works on this printer.  I scan most all instead of filing paper.  I was in trouble when the sweep would not work. ... HP support is GREAT!

• LaserJet 1536DNf not print duplex

  I'm on Lion 10.7.3 and have a Laserjet 1536DNF MFP. I can no longer print duplex even if I select a double bond and long edge on the layout. I don't know when it started - maybe after the last update. As far as I KNOW, I have the latest drivers from Apple. All solutions?

  I checked this and the PPD file seems correct. At first, I thought it was the result of the 10.7.3 lion update, but now I don't know because I tried printing with my old laptop MacBookPro on Snow Leopard. Maybe the Lion update screwed a few settings in the printer? Thanks for your help.

• Problem with the selection of results that meet all the criteria and not only some

  Hey guys.
  
  The best way to describe it would probably be by the code:
  

  SELECT sup.SuppCode, sup.SuppName, sup.PostCode
  FROM Suppliers sup, Stocks stk
  WHERE stk.Price >
  (SELECT avg(Price) FROM Stocks)
  AND sup.SuppCode = stk.SuppCode;

  Who selects the items (not actually posted) providers who have a higher than average price.
  It gets the items that are above average and neglects those below average, but I want to show him only the suppliers where ALL of their items are above average and not just some of them.
  For example, provider supplies A couple of points 1 and 2 and they are all two higher than the average price supplier A is displayed
  Supplier B provides two points 3 and 4 and only 4 exceeds the average so supplier B is not displayed.
  
  I think it's trivial, but I can't seem to get by. :(
  
  Any help would be much appreciate.
  
  Thank you.

  Something like

  SELECT sup.SuppCode, sup.SuppName, sup.PostCode
    FROM Suppliers sup
   WHERE NOT EXISTS (
      SELECT 1
        FROM Stocks stk
       WHERE sup.SuppCode = stk.SuppCode
         AND stk.price <= (SELECT AVG(price) FROM Stocks)
    )
  

  Who finds all the suppliers that no stock which is lower than the average price, which is identical to the suppliers who only things above average price of stock.

  Justin

• LaserJet 1536dnf - Setup error

  Multifunction LaserJet 1536dnf printers

  Windows Vista Edition home Preimum SP2

  I have issues, install the latest version of the software that I downloaded from the Web site.  Everything installs fine except for the last pilot who, during the download of Windows Update, gives me an error and then fails.

  Here are some screenshots showing how the progressess of installation:

  

  

  

  Any suggestions?  I tried the disc that came with the printer, also without success.

  Kind regards

  Russ

  After discussing with the help of HP, it wound up that there was a problem with my system files, as determined by the running SFC/scannow.  SFC was unable to repair the files, so my only solution was to do a system restore.  I went back to a point of restoring from a few weeks earlier and everything was back to normal.  AVG and Malwarebytes didn't find anything until I did the restore, so I'm not sure of the real cause of the corruption of system files.  Oh, well.  Thank you.

• Airpint can't find HP LaserJet 1536dnf MFP - please help

  I have baught HP Laserjet 1536dnf a few months ago cause HP said that it is compatible Airprint. In fact, I went to a few stores just to get it in stock of the last store I visited. Up to now, I still can't seem to work and feel like a mute bought this HP printer. If anyone of you or HP engineer can help... Please.

  In fact, I did some research and tests on the configuration. Some time ago I got the chance to see the printer appears (little) and I can print a document and the printer has disappeared. My ipad and iphone can not find again later, even after rebooting.

  I've already updated my iOS to the latest version. Update the firmware on my Zyxel router and printer. Also, I replace my zyxel with 3com router (now back to zyxel). None of these help.

  My configurarition _Here. _
  Devices: iPhone 3GS (iOS4.3), iPad 1 (iOS4.3)
  Printer: MFP HP LaserJet 1536dnf (latest firmware 20110405); Fixed IP address;

  Router: ZyXel P-660HN-F1z (latest firmware Version: 3.70 (BJI.4): 22/03/2010)
  Network configuration: all are in the same network 192.168.1.x

  Would be very grateful if someone can help out me.

  This might help:

  http://Gothick.org.UK/2010/05/16/getting-the-Apple-iPhone-remote-app-working-with-a-ZyXEL-router/

• LaserJet 1536dnf error 79

  I'm in trouble with my 8-Butterfly-old LaserJet 1536dnf. Worked fine with my computer Windows XP and Mac OS X up to yesterday, when I tried to send a fax by flat bed scanner (scanner ADF works perfectly)

  When I press the button on the Fax, the printer prompt if the document is on "glass", I confirm, start creshes scanner and printer. All the lights start flashing and displays "error 79, restart printer. After a few seconds of printer restarts.

  Also, I unplugged the power cord and plugged into the Jack at the end of a few minutes...

  Print and scan using Windows does not always work, but my favorite software is on my Mac.

  With my Mac OS X computer, one feature of printing now works fine, scanning software can't find any device with Hello (all services are enabled on my printer!). I downloaded the last software OS X from HP.com, uninstalling the old drivers and the software, installed a new... but the scanner and the HP Utility software does not always work correctly.

  I also do a "reset" on the main parameters in the menu of the printer, but nothing has changed (lost network configuration and fax settings).

  Printer runs the latest version of the firmware available on the Web from HP.com site. I've never had no problems during the update process.

  Do you think that my printer needs to be repaired?

  In this period I need really the printer and a scanner for my important documents.

  

  Called technical support.

  Turn off the device, then:

  -Press x and > at the same time (hold)

  -turn on the printer

  -Press and hold both buttons and wait for the message "restore" on the screen

  -wait, wait... When you have finished starting printer new