LaserJet 400 colorMFP M475dn: my printer will not scan

Similar Questions

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• My photosmart hp over printer will not scan. I reinstalled printer and sftwre and it will not always

  I reinstalled printer and software and it will not scan.  I then go to fax Windows and analysis and that will not work either.

  Hi rademaker,.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
  
  I would like to know what are the errors you receive?
  
  http://www.HP.com/go/tools

• Why my printer will not scan to my computer, the will says not connected

  My hp officejet 6310 all-in - one will not scan to my computer can someone please advise

  my printer is connected through USB, when I ran the check he told me to uninstall and re install which I did, but still does not work

• HP LaserJet Color MFP M175nw 100 prints, but not scan

  This problem has just appeared out of nowhere the LaserJet printer prints (so it is connected), but when I run the HP basic digitization program, I get the error message that the scanner is not connected.  I rebooted and restarted the printer. Also, I downloaded and ran printing HP and doctor Scan. It detects the printer and the scanner as "installed", but when I ask him to communicate with the scanner, it is said that the "selected product is not conencted".  When I try printer (same ip address), it detects it and gives me the possibility of "Difficulty Printing" or "problem analysis". On the "difficulty of analysis", it says "establishing connection with Scanner", but loops back to the beginning of the process, without success.  Now, it will blow your mind, if I screen Win-8 Metro and run the HP and Capture digitization program, the scan works perfectly (Although this scan utility is more limited than the regular version of HP-Scan). So, here I am trying to solve a communication connection problem, when none really exists.  Has anyone ever seen this situation? Anyone got the answers?

  I fought this problem since I bought the color printer. I understand that the printer is discontinued. I love it, I have two, they work great, except for this problem.

  Now my conclusions and solution.

  After installing the software, it works fine. After a while it doesn't. Some software installed HP must be retired by anti-virus programs or gets too writes because he went, so that the scanner doesn't scan. I have yet to find what is happening to the scan software, but it disappears.

  My solution...  I remove all the software printer HP 100, including port data in the configuration of the printer. If you have installed several times, you will have a list of information about the printer port, remove it.

  I use their basic installation software. Usually always scan not scan. You must install it AGAIN, during the first installation. It works every time, until it disappears again.

  HP technical support has no idea on this issue. I spent more than seven hours talking to probably all the tech they have without success. Finally it me they would make me a 'deal' on a printer company.

  I would like to know if you find that zapped installs it HP. As far as I know is it disappears and the scanner no longer works.

  [email protected]

  Bob

• LaserJet M1522 \HP: I can print but not scan after 10 Windows installed with HP LaserJet M1522 after trying things on this

  I spent many hours on this forum today trying to solve my problem.

  Everything was fine until Windows 10 installed after I * thought * I hit cancel their incessant commercial.   Before the upgrade of the OS,

  1. I used a shortcut to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\HP\HP LaserJet M1522\Scan which took "C:\Program Files (x 86) \Hp\Digital.

  2. a dialog box appears asking me to choose from a list of profiles of scanning that I did. Once what to choose, I have a second dialog box.

  3. I put the "paper Source" flat and the "Picture color" selected option button.

  4. I USED to be able to just click on Scan and then another dialog asking where to save it but neither preview nor Scan make the scanner scan button.  Overview gives me the wave 'an error occurred... ". Select "vernissage" again.  If I click on Scan, just all disappears.

  ______________________________________________________________________

  I have tried the following to solve this problem:

  Installation of new drivers.

  Doctor to Scan running (here, the green progress bar ends after the "HP M1522nf Scan LI" scanner picking and ending up with an error "Connect without success".)  It allows several options.

  -J' tried power cycling everything.

  -Click on retry.  I take the last option in the list and it gives another green bar and I ended up a complete turn to the first page of the Scan Doctor with the "HP LaserJet M1522 MFP Series PCL 6" and "LI Scan M1522nf HP".  Both still have network connections and "installed".

  -Continue the Scan doctor, I click install get.   I created which today many times without success.

  I came to support and went through what looks like my problem even, but nothing seems to help.  I spent several hours to do.

  I should also mention when it came time to download the drivers there are 3 categories.  In the first category, there are 3 drivers.  I went through each of them at this stage.

  I realize your question at the top of the page is "HP printers - WIRELESS card Scanner is lost (Windows) ''."

  I'm afraid to do an uninstall of HP "stuff" because my computer is a HP and I don't want to aggravate my problems than they already are.

  I understand there is a windows application to use for scanning, but because it also controls the camera to the computer, I wanted to stick with the simple scan, which I used for many years now, coming to scan from my HP scanner/printer to my HP computer.

  Thanks a lot for your opinion.

  OK, got it to work!

  Desinstallion old prinerdriver as good as he got, withdrew the rest of this register and recycled the ' puter.

  Then installed latest firmware for the printer (do not know if this was necessary, but it had those of 2009 and the most recent from 2013, so I guess it wouldn't hurt).

  Installed the latest universal driver for HP (this still does not solve the problem but...)

  Finally reinstalled former driver Win 7 complete solution and then it works. I guess it fills some gaps while retaining the more fresh drivers?

• printer will not scan during installation of realignment

  Windows 7 (64) using PRINTER 3050 J611a - after the replacement of the printer carriage. alignment printing OK, but the scan does not see the oridginal. Need advice to fix.

  Hey, Wep,

  I'm not quite sure I understand what the question is. When you scan pages of alignment printer does not recongize it? Are you receiving and error message when this happens? You can see this article while waiting to see if it helps.

  Alignment failed' Error Message appears on the all-in-one

  Thank you

  Sean

• Photosmart 7520: Printer will not scan in color

  My printer has until recently been able to produce an analysis of color using the supplied document and the printer control panel. Now, he refuses to do so even if I did not consciously change all parameters. I can get a scan color by placing a single document in the printer and then goes via system preferences/printers and scanners and selecting the scanner, and then set the print area and choose the resolution, but it is a rather laborious and tedious route.

  I downloaded the most up to date nd drivers software on the HP site, but this has not solved the problem. Interestingly, the software download is labeled OS Mavericks, so it made me wonder whther that perhaps this is related to my recent update to Yosemite?

  Any suggestions or advice welcome

  Hello

  Of the applications folder, open the Hewlett-Packard HP Scan application bin folder, then empty the trash.

  Then download and install the HP Easy Scan from the Mac App Store app and try to scan the image of the front of the printer:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Please let me know of any problems,

  Shlomi

• printer will not scan complete

  I have a c4400 which was connected to an XP. When it is connected to my win7/64 bit it will print but hangs when scanning. I deleted the drivers and re-installed the software twice. This printer works ok when it is connected to my Vista laptop

  replaced the usb cable. Problem solved

• My Deskjet F380 printer will not scan after upgrade from XP to Windows 7 32 bit

  I have a HP printer Deskjet F380 (S) NC 73 NGZ14S which worked perfectly on Windows XP. Island re install software without disk original and well as the printer and copier are working the scanner is not. I have downloaded and run the Wizaedand that had this message "Full HP software is already installed, but the basic functionality pilots seem to be missing or configured incorrectly. Assistant and then went to "drivers for your printer are disabled click next to allow them to" clicked Next, and he returned to the previous message again. I have not installed the software on. Windows 7 but I don't know that my original HP software disk has not been used. Now must I UN install Windows 7 and re install from the HP website. I got another message in short while the HP site it says driver required WIA trawling. I'm not very experienced on the computer and would like your help thanks Mimosa

  Yes, I would uninstall the driver and software and then download the driver for Windows 7 and install it.

  Here are some instructions for uninstalling: uninstalling the printer software.

  You can download the driver here: Driver and software downloads.

• HP 6110 All in One printer will not scan to PC applications.

  I have an 6110 all in one printer connected to a HP Pavilion desktop computer running on Vista Home Premium with the MS Office 2007 Suite.  When I try to scan from the printer to MS Word or any other apps, the error message says: "unable to connect to the PC.  However, printing from the PC to the printer works very well and the USB cables are correctly.

  Any ideas?

  Thank you

  ... WSF

  ... WSF

  WSF,

  Can scan you from your pc to the 6110, using the hp scanning software?

• My printer will not scan... I get a message to start the search from my computer and I don't know

  When I try to scan to my computer, I get the following message.

  Scanning problem

  Try to start the scan of the computer. Refer to the documentation for more details.

  I don't have any need to.

  Hi Thomajs112748,

  Open the icon on your desktop that looks like the printer, and then click Manage scan of the computer to make sure that this feature is enabled.

  

• HP LaserJet 400 ColorMFP M475D: HP equipment MIB (Management Information Base)

  Hello!

  I am developing a project with Zabbix (open source solution for the network, applications, and devices, such as a printer, switch and monitoring etc) and now I'm getting better the SNMP Protocol on this software. So, to start, I need to know some information in one of my devices, in this case a HP LaserJet 400 ColorMFP M475DN.

  Could someone tell me how CAN I find the MIB (Management Information Base) and the OID (Object Identifier) of this equipment?

  Thank you!

  Navigate to the developer https://spp.itcs.hp.com/spp/ Web site

  From the home page (via the button in the Software Development Kit ), it is possible to access the package public spaces:

  

  Within the branch Laserjet and Digital Sender , select management of printers. MIB | MIBs Phoenix device, and you'll find a relevant entry for your device:

  

• Device that my for hp photosmart printer b110 series will not scan into my computer it comes up with error scan!

  p photosmart HP b110 series printer will not scan anything on my computer.  The message - try the scan of the computer or documentation - memory to come to the top.  I can't find anything useful in the documentation and I can't find a way to scan the computer.  It was perfectly scanning up to about a week ago.

  Hello

  • What were the changes made before the issue started?
  • What version of Windows operating system do you use?

  You can view these methods:

  Method 1:

  I suggest you try to analyze the file from the following location:
  1. navigate to the folder of C:\program HP imaging\bin location
  2 Locate and double click on hpqsciapp.exe to activate the scanning application.

  Method 2:
  If the steps above fail, I suggest to uninstall and reinstall the drivers from the HP site and see if that helps.
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3944627&LC=en&cc=us&DLC=en&lang=en&cc=us

  To download compatible drivers from the printer manufacturer's website, first see which version of Windows you are using, and then search for compatible drivers.
  1. open system information by clicking the Start button, all programs, Accessories, click System Toolsand then clicking on System Information.
  2. click System summaryand check the name of the operating system and the Type of system to see which version of Windows you are running.
  3. go to the printer manufacturer's website and search for a compatible with your version of Windows printer driver.
  4. follow the instructions on the site to download and install the driver.
  Additional information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Note: These links means on Windows 7.

  See also:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-D110-scan-error/TD-p/370037

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/C6380-scan-error-quot-try-scanning-from-computer-refer-to/TD-p/55905

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-Photosmart-C4780-can-t-scan/TD-p/332577

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/C5580-scan-problems-how-do-I-scan/TD-p/90965

• HP Photosmart C4780: HP photosmart C4780 will not scan to my computer

  I plugged in just this HP all-in-one to my computer.  It does not analyze to my computer.  It will scan on an SD card without problem.  What can I do to make the scan to my computer?

  Hi @Lisa213,

  Thank you for joining the HP Forums!

  I read your post on how your HP Photosmart c4780 printer will not scan on your computer. I'm happy to help you!

  A few questions for you:

  • How is the printer connected, wireless, Ethernet or USB?

  • What is the operating system you use, Windows or Mac? What version?

  In the meantime, maybe one of these guides will help:

  • Scan from the computer with the (Windows) HP Solution Center.
  • Digitization of Documents and Photos (OS X).

  For future reference, hereis the user guide for the your printer.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  Hope this helps, and hope to hear from you soon!