HP LaserJet 4050N: LaserJet - mysterious brand repeated on paper after the label jam

Similar Questions

• LaserJet P1005: LaserJet P1005 unintentionally print several copies after the decommissioning of 10 of Windows to Windows 7

  My LaserJet P1005 trustworthy priinter was perfectly printing for a few years on my HP TouchSmart 300 running Windows 7 and connected via USB1.  I have upgraded to Windows 10 for two weeks before deciding that he was turning too slowly.  Subsequently, I have downgraded to Windows 7.

  Since the downgrade, the printer has been printing several copies of all documents (eg.  Word, Excel, Web pages).  He prints a copy, waiting (the State indicates a copy pending) and continues to print 3 or 4 future COPs..

  So far, I have tried the following:

  1 deleted and reinstalled the printer P1005 driver.

  2. guarantee that no multiple copies are selected in the options of the software and a printer.

  3. you click Printer Sharing tab in the printer properties.

  I know that's not a printer for the State of the art, but any suggestions on my printer P1005 back to normal would be greatly appreciated.

  Tom

  Hi @Amoeba,

  Welcome to the Forums of HP Support! I see by your post that the printer prints multiple copies of the same document. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Try to clear the record of spool and restart the spooler to print, see if this will help, clear how current Print queue in Windows Vista & Windows 7.

  Please try the steps listed in this document, if the problem persists, HP printers - Print Jobs stuck in the print queue (Windows). They should help this situation. What were the results when you ran the Print and Scan Doctor?

  I used this document to the network printers, you can try it to see if it will help with the USB connection, HP LaserJet Pro P1102w and printers P1606dn - printer continuously prints the same Print Job after it is installed on a network.

  Please let me know the results and if there is anything else I can help you. Thank you.

• LaserJet Pro M1217nfw booting is not after the firmware update

  Hello

  My configuration:

  HP LaserJet Pro M1217nfw (USB connection)

  MacBook Pro (mid-2012) running OS X Lion 10.7.5

  My Odyssey:

  The HP scanning software included on the CD is rudimentary to say the least. In particular, it don't will not let me scan multiple pages and combine them into a single PDF file.

  Tried to scan printing & scanning with ImageCapture, an excerpt, and the pane in system preferences: they see any of the MFP.

  Uninstalled HP, reset printing system software, downloaded and installed http://support.apple.com/kb/DL907 according to the instructions on http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Mac-Lion-Scanning-Multiple-Docs/m-p/159... no luck.

  Downloaded and installed the latest HP software http://ftp.hp.com/pub/softlib/software12/COL32660/Im-80903-6/LJM1130_M1210_MFP_Full_Solution.dmg

  Installation goes OK, then asked the installer to update the firmware of the printer and I foolishly said yes.

  Result: the printer will not be in service longer. At the start, it displays "then to initialize... "with the Green (ready) and amber (caution) of fires, then LCD turns off, then"initializing... ". "all over again, to infinity. Needless to say that the HP software or the Firmware utility see the device more and in system preferences, it is listed as "offline". In a Word, it is bricked.

  Of course, I could use some good advice. Thanks in advance.

  Solution in another thread:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/LaserJet-Pro-M1217nfw-non-functional-after-firmware-upgrade/m-p/2323767#M36922

• LaserJet pro 1415CN torn/shredded paper in the printer. He can't get out

  Does anyone know how to get out the duplex unit? I can't remove paper that is now grated into the printer.

  Sorry, the duplexer does not come off this LaserJet. These printer types have the duplexer incorporated with the rear panel.

  It seems that it can come off, but it won't. He grated JAMMED paper or just lost inside the duplex unit? I asked because if it is loose and you want just outside, you can try canned air to spray the inside of the duplex unit.

• Favicons repeat through tabs, behind the label text when you switch between tabs. 37.0.1 sometimes the Green scroll bar does not have too

  Please mention the attached JPEGS. When I switch between tabs, favicon image repeated behind the text. In some cases, the image of the vertical scrollbar is messed up, it cleared up when I click on it. -Does not appear to affect performance, simply annoying. Thank you!

  Please temporarily disable your Avast extension to see if it has to do with it.

  Try Firefox Mode without failure:

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

  HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

  The printer works at all with this cable?

  The cable has recognized and installed by Windows XP when you logged on to the computer?

  If the cable has been recognized, what steps have you taken to install the printer then (be as accurate and complete as possible)?

  You get an error message?  If so, please provide, without paraphrasing.

  This printer has already been installed on this computer?  If so, with what type of connection?

  And especially, what is the brand and model of the USB to parallel cable?  Many of them do not work.  See, for example, the comments here , which suggests that 25% of the units will simply not work.  This seems to be one of these products you should buy at a local store, rather than on the Internet, then you can continue taking it back until you get a working unit.

• Color LaserJet Pro 500: grateful additional paper tray

  Brand new LaserJet Pro 500 and 500 sheets and heavy media bin (model CE522A/part number 2273B00AA). Machine will not recognize the paper tray.

  Last night, I left it unplugged and the two separate rooms - put back them together this morning, then plugged the power and network in and turned on. When the machine starts up, I see "true HP installed', 'Configuration' and 'Initializing' messages.

  I have a case open with HP support. She sent me this morning to say that the part number I sent relate to the status bar and the serial number I sent was the printer. I took the numbers directly from the status bar and lose faith in a hurry.

  Please let me know if there is a driver setting I'm missing or something to make it go fast.

  Thanks in advance for your help.

  Hello

  The plateau of 500 pages CE522A is not intended for any model of the Laserjet 500 printer, it is intended for the previous models such as the CM3530 printer for example.

  What is your exact printer model?

  The M525 model supports the tray CE530A:

  http://store.HP.com/wcsstore/hpusstore/PDF/LJ_ENT_500_MFP_M525%20Series.PDF

  The M551 or M570 models supports the Board of CF084A:

  http://h71016.WWW7.HP.com/HTML/PDFs/LaserJetEnterpriseM551.PDF

  Where did you get the shape of the status bar? It is not intended for your printer and can therefore be used with her...

  Shlomi

• Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

  I can use WIndows 10 if the fix is available for this OS.

  I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

  Any help would be greatly appreciated.

  Thank you

  Hello

  Install the following firmware for your printer, and then look for a difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

  Kind regards

  Shlomi

• HP Laserjet M1132 MFP is too slow on the network!

  Hello

  My HP Laserjet M1132 MFP is too slow on the network!

  I connect the printer to the windows XP 32 bits SP3 using UBS port. The printer works fine on the local computer, but when he shared on the network running too slow, for example with the print test page it takes about 45 seconds to print and other documents, it takes much longer.

  I installed the last form HP driver site and update the firmware it the latest version.

  It happens on other Windows XP machines as well.

  I have connected the printer to my laptop (Windows 7 64-bit) and it works very well (no delay on the network) and it seems that this problem have some relationship with the windows XP Driver.

  I used the trick of local port on computers remote (instead of the normal method) like this:

  "add a local printer.
  "new port".
  "localport".
  \\XPcomputer\HPPrinterName port name

  but still nothing!

  There is nothing wrong with the network, allows us to use a Samsung printer on the same machines on the network without problem.

  I really appreciate your HELP!

  It seems that no one on the planet has the answer to this question!

  The only available option is to upgrade your operating system to windows 7 (vista can work, I have no idea!).

  He wat the only solution for me.

• HP Laserjet 500 colorMFP M570d: printer HP Laserjet 500 colorMFP M570dn reflecting the situation of "on paper", but the paper is present.

  HP Laserjet 500 colorMFP M570dn reflecting the situation of "on paper", but the paper is present. Effects of several operating system platforms; 10, 7, 8.1, 2012 R2 server.

  We have this printer is installed on a server for printing on 2012 R2 server configuration. Everything works fine until today. The status on the side of things, regardless of the OS, OS shows the printer status is "on paper". Paper has been confirmed in the printer, cleaned rollers, test pages, copy made, etc. When you submit a print job, the State remains the same, just, the job is in the queue and does nothing.

  Any help would be appreciated.

  CRI_IT_guy

  When the software indicates out of paper, it's really tell you he lost communication with the printer. It could be a server problem.  To test since you already know that the printer works would print a printer configuration page and using the printer ip address set up on top of one of the computers as a local tcp/ip printer without going through the server, so the computer prints directly to the printer.  If it works, then your issue is network or linked servers.  Make sure that the address of the printer has not changed and also make sure that the spooler is running on the server.

• Why does my HP laserjet 1022 produced a black line on the right side of the page?

  Why does my HP laserjet 1022 produced a black line on the right side of the page? This occurs by using Word 2003, Photoshop, Acrobat etc. I don't get this with my Epson printer. My printer drivers are all to date. OS = Windows 7.

  Hello dqmcg

  Have you checked programs and OS - seemed to be OK, so did a new install of the printer. I have seems to now work OK - IE the files previously printed with lines now don't (only verified although some).

  I think that I was naïve in beliving Windows when he says that the printer and the driver were OK, and when I did a re-driver installation, Windows just used the file I already had. Also the "print test page" printer properties was always OK. Must have been very slight damage to the driver who showed up only with certain types of files of a few (different) programs.

  Thank you very much for getting my brain to work and begin to think logically.

• HP Laserjet colorMFP M475dn: cannot send faxes from my mac after the upgrade to yosemite

  I used to be able to send a fax from my Macbook Pro using an excerpt and then print the PDF file to the fax on my Laserjet M475dn colorMFP function.

  After installation of OS X Yosemite:

  • a dialog box says that "some of the software of the printer is missing."
  • When I clicked on the button install, then said "you must install the software to use this printer...." If the software is not available in software update, contact the manufacturer of your printer"
  • Then I downloaded the .dmg for laserjet and officejet files (I also have a photosmart that I use for scanning)
  • I deleted the printers and tried to re - add
  • When I add printers laserjet, fax does not show up on top of the list of printers.
  • How can I get the fax driver to install on OS X Yosemite?

  OK, mission accomplished! My ability to fax works on Mac OS X Yosemite!

  So to sum up, here's what I did, although not necessarily in this order:

  1 reset the printing system, which erased all of the devices in the list Printers & Scanners

  2 install the software utility package HP = HP-LaserJet-SW-OSX - Mavericks_v12.34.34.dmg

  3 install the package for the HP printer software update 3.0

  4 restarted my mac

  5 entered in Printers & Scanners and when the dialog box pops up, added the Fax with the driver for Fax selected in the drop-down list to use as directed by the dialog box illustrated by TeK_AcE

  6 tested the fax print in overview and selecting 'Fax PDF' in the menu drop-down PDF. I sent a fax to the fax number of the HP test at 1-888-hpfaxme or 1-888-473-2963

  7. Add the printer again, the driver Laserjet and not Airprint

  Hope this helps someone else.

• LaserJet 2100 - multiple pages feed even after roller and separation block replacement

  Hello

  I have a old and, up to now very reliable LaserJet 2100.

  After experiencing a few problems of collection of papers, I replaced the power rollers and separation for the MF tray and the main tray buffers. Each tray pickup seems to work well and always takes a single sheet at a time.

  However, what power from the main tray (bottom), often (but), a second sheet will be in the printer to receive AFTER the first leaf has been picked up and transplanted (that is, the end of the page has entered the printer). It's almost as if I print a multi-page job, even if it's a single page (that is, the regular test page). The first page comes out of the printer normally and then the printer stops (paper jam error) with an inch or two of the second sheet comes out of the output slot.

  With the covers off the coast, I see that the solenoid is it undertakes to allow the feed roller to bring in the first page, but remains often engaged a bit too long, so a second sheet is picked up * after * the first sheet is completely picked.

  The maintenance manual enamels on the use of signals from the sensors in the paper (or for that matter, even where they are), so I'm a bit lost as to how to solve this further.

  Any ideas?

  It is a problem on older printers. Your question is tray 2 pickup solenoid that controls the movement of the roller from tray 2. It is very difficult to access, and you will need the maintenance manual. What happens when you send a print job the main gear assembly rotates and the solenoid which controls the roll tray 2 active and moves his arms 'L' to release the roller and then turn off the power to the solenoid and the arm of 'L', which is spring returns to stop the front roller it can turn again. HP has used a material damping on the solenoid to calm the activation of the solenoid clicking noise. Over that time off and all that remains is the glue that held up. When the solenoid activates arm 'L' hit the Center and glue residue prevents the arm of his return in time to prevent it from stopping the roll and therefore another sheet is fed. You need to access the solenoid which is behind the main landing gear on the right side. Takes a lot of work and you will need the maintenance manual. Once you have access to the solenoid, you remove, unhook the spring and remove the arm of 'L '. Then you clean the residues of glue on the edge of the coil and everything on the arm of 'L '. You then ask a material felt on the edge when you remove the glue. Put everything back together and it should work another 12 years without problem. Good luck.

• LaserJet Pro 400 M401dw: LaserJet Pro 400 M401dw very slow after upgrade to Windows 10

  Updated from Windows 8.1 for Windows 10.

  MT LaserJet is printint to about 10% of the speed that it used.

  I've updated the firmware; did not help

  Hello, have you tried reinstalling the printer with windows 10 driver? Or change the PCL 6, PCL 5 driver? I could try it first and see if that changes anything.

  I hope this helps...

• LaserJet Pro MFP M225: New printer accepts the static ip address, said TCP/IP settings, but nothing is recorded

  Via the network configuration menu, I put the IP address of 'Manual' and entry

  IP address of the printer

  subnet mask

  the gateway IP address.

  At the end of the said printer TCP/IP settings are updated.

  Print a summary of network page shows no data.

  I swapped the ethernet cable.

  Ideas?

  (Thanks in advance)

  Mysteriously, this was probably necessary for the connections to stay together long enough to get friendly.

  I have reset some things on the ATT, plugged and unplugged modem ethernet cable, obtained on other issues, I have to solve... and, Lo and behold, the LCD screen on the front of the printer has started to display the IP address.

  And, of course, the printer works now!