HP Laserjet 5500: failure of multiple copies

I am not able to print multiple copies, as I can't find the mopier mode must be disabled in the properties

The exposed attributes will probably depend on the driver that you have installed.

My Windows Professional 10 64-bit system has several built-in drivers (for PCL 5, PCL 6, Class PCL6, PS, PS class) for the Color LaserJet 5500 printer:

You may need to click the Windows Update button in the Add Printer dialog, then wait (possibly several minutes) while additional drivers are downloaded, until the list is filled again.

Some time ago, I downloaded the drivers PCL 6 and PCL6 class for this printer run tests (I don't have this model of the printer, if the target port is defined on file:).

With the pilot PCL6 class , shows the device settings tab in the printer properties dialog:

With the PCL 6 driver, the device settings tab on the printer properties dialogue indicates:

Tags: HP Printers

Similar Questions

  • Cannot print multiple copies of Word or Adobe

    Cannot print multiple copies of Word or Adobe (although Notepad works very well, she accepts the demand for multiple copies)

    Windows 7 Ultimate

    This is the next thing I tried...

    HP Laserjet M1005 MFP printer

    Problem: print one copy and ignore the rest of them

    1 mopier moye... There is no mode mopier on my device

    2. adjust the printer to print directly.

    3 re install the driver

    4. update the firmware

    5 restart the spooler and in her service automatic setting

    6 deactivation of advanced print

    7. buy a new printer

    My new printer is Canon LBP 3300

    Problem: His little different than Hp, now when I try to print multiple copies, it does print none of them...

    The two printer works fine with other computers.

    Hi Nitin,

    You mentioned that the mopier mode setting is not available for the printer. You can check if there is a possible working storage?

    Here's how to find one:

    • Select StartControl Panel<>Printers.
    • Right-click the desired printer icon and select printer Properties.
    • Select the device settings tab.
    • Find settings for storage of the work at the end of the list. (Check if the mopier mode is available in this setting. This setting could also be under "Installation Options").
    • Change the settings for active to disabled.
    • Click apply and OK.

    Check out these links for other procedures for troubleshooting related to the issue:



    You can also disable ranking for the printer:

    1. Go to file > Print > collate box.
    2. Uncheck the box for the collate box.

    In addition, when you try to print a document, launch the document in administrator mode. For example: right-click on the word and select run as administrator of mode.

    Please let us know if the problem still persists.

  • LaserJet 1320: Print multiple copies

    Regardless of the number of copies I specify to print on my Laserjet 1320, it will only print one copy. I use Word 2010, Windows 8.1

    I suspect that the following is the case:

    • Your document is a MultiPage document (i.e. not just a single page).
    • You select that copies be printed "collected" (e.g. pages 1,2,3,..., 1, 2, 3,..., 1, 2, 3,...) rather than "not assembled" (i.e. pages 1,1,1,..., 2, 2, 2,..., 3, 3, 3,...).
    • The driver assumes that the printer can produce multiple copies of a source only copy - this is known as ing MOPY(I think it stands for "copy of the original multiple").
    • But the printer does not function MOPY - usually this is only available if the printer has a hard drive or a large RAM disk - I do not think that the LJ1320 supports one of these.

    You can confirm that the foregoing occurs by:

    • "Capture" a print job to a file (using the option "print to a file" in the print Word dialogue or sample driver
    • Then examing initially file resulting .prn (you should be able to open it in Notepad).
    • Most of the file can be unintelligible, but initially will look like:

    If the command SET QTY is there, this confirms that the driver think the printer will make copies.

    If so, check the settings of the device to the printer:

    to check whether or not the system thinks that a hard disk is installed on the printer, and Mopier mode is enabled or not.

    If the disk hard printer is set to installed, change to not installed.

    If the Mopier Mode is set to Enabled, change it to disabled.

    Then repeat the tests to see if it makes a difference.

    He should do it, although the print jobs sent to the printer will be larger (they will contain several copies).

  • HP LaserJet 4050tn: LJ 4050 printing multiple Copies in 2013 office

    I have a strange problem that I hope someone can help me with. A bit of history...  We have a network printer LaserJet 4050tn on a Windows Server 2008 R2 Print Server. All our workstations are Windows 7 x 64. The printer uses the universal driver PCL 5 Version 6.1.

    The problem is that when someone prints to this printer and they want multiple copies, two jobs get sent to the printer. By example, if I want two copies of a Word document 2013 a pages, the double exits printer. In other words, I find myself with four pages divided into two print jobs. If I want only a copy, the printer prints only one page, as it should. This only seems to happen with documents other than Office as PDF files.

    We have a good number of these printers and it's the only one who acts with (that we know). Would that be a problem driver or something else altogether? Thanks in advance for the help.

    The issue seems to be with the 6.1 PCL5 driver. We have restored the printer on the PCL 5.9 driver and it works fine.

  • LaserJet P1005: LaserJet P1005 unintentionally print several copies after the decommissioning of 10 of Windows to Windows 7

    My LaserJet P1005 trustworthy priinter was perfectly printing for a few years on my HP TouchSmart 300 running Windows 7 and connected via USB1.  I have upgraded to Windows 10 for two weeks before deciding that he was turning too slowly.  Subsequently, I have downgraded to Windows 7.

    Since the downgrade, the printer has been printing several copies of all documents (eg.  Word, Excel, Web pages).  He prints a copy, waiting (the State indicates a copy pending) and continues to print 3 or 4 future COPs..

    So far, I have tried the following:

    1 deleted and reinstalled the printer P1005 driver.

    2. guarantee that no multiple copies are selected in the options of the software and a printer.

    3. you click Printer Sharing tab in the printer properties.

    I know that's not a printer for the State of the art, but any suggestions on my printer P1005 back to normal would be greatly appreciated.


    Hi @Amoeba,

    Welcome to the Forums of HP Support! I see by your post that the printer prints multiple copies of the same document. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Try to clear the record of spool and restart the spooler to print, see if this will help, clear how current Print queue in Windows Vista & Windows 7.

    Please try the steps listed in this document, if the problem persists, HP printers - Print Jobs stuck in the print queue (Windows). They should help this situation. What were the results when you ran the Print and Scan Doctor?

    I used this document to the network printers, you can try it to see if it will help with the USB connection, HP LaserJet Pro P1102w and printers P1606dn - printer continuously prints the same Print Job after it is installed on a network.

    Please let me know the results and if there is anything else I can help you. Thank you.

  • Multiple copies print IE9 and Word on HP Laser Jet 4250N

    Why this keep happening?  It's random, and I don't know how to stop it.


    Thanks for posting your question on the Microsoft Community.

    Please provide us with the following information so that we can help you
    In addition:
    1. What exactly is the problem you are having?
    2. Is printing made several copies, when the single copy is selected?
    3. The problem is specific to word and IE?

    I suggest you refer to the following fix it:

    Diagnose and automatically fix problems printing and printer

    In addition, uninstall the software application and update the latest drivers for HP LaserJet 4250.

    Uninstall or change a program http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

    Updated a hardware driver that is not working properly

    HP consumer support


    Additional information:

    HP 4250 - problem with printing multiple copies on network

    Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

  • Cannot print multiple copies from Excel. Also impossible to update HP driver. The update of the Microsoft HP driver fails to install.

    Windows 7 + Office 2007 with HP 1200 LaserJet printer: unable to print multiple copies of Excel documents.  Also impossible to install the update from the HP Microsoft driver.  Windows Update indicates the updated driver available... but fails to install.  Everything was stable and works very well.  All other printing works very well (including multiple copies from other programs like Adobe etc).

    Any help will be appreciated.

    Hi Rolloutman,

    ·        What happens when you try to perform multiple copies of Word?

    1. to narrow down on the issue, I suggest you to print several copies of a Word document or notepad.

    2. provide the error message or error code for the problem to install the updated driver, follow these steps:

    i. Click Start, in the search box, type in update

    II. click on windows Update

    III. click view update history

    IV. double-click Update failed

    3. update the printer driver to manually. Steps to update the driver:

    i. click on start, type devmgmt.msc and then on enter.

    II. develop the printer and right click on the sub element and click on update driver.

    Link for reference:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    You can also check out the link below:http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29790&locale=en_US&taskId=135&prodSeriesId=29789&prodTypeId=18972

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Multiple copies, and then reinstall WITHOUT Inbox after. (NOTE: multiple copy is a known issue with Norton Anti virus)

    Kept Thunderbird download multiple copies (up to 25 each) on several occasions.
    So I uninstalled later did install a new download and there is NO Inbox... Ouch?

    Did you remove your profile? (if you did you know it is not automatic)

    What do you see when you open Thunderbird? Please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

    Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  • Thunderbird will download multiple copies of email with large attachments; about half a Meg or more.

    Have uninstalled and re installed TB; still had the problem so deleted files popstate.dat; three old and I guess that the other two were for both accounts I have. Sometimes I go to the server/webmail and delete the large email to stop repeated downloads.

    I tried a different e-mail program, and it did not download multiple copies. Tried to uninstall TB new and removed the front profile of re install and still had the same problem. One of the large files sent to my friend that I had installed TB on his computer for him and he doesn't have the problem. So I changed my email from POP3 to IMAP and now it seems that the multiple download problem disappeared. I would like to know well why I had a problem and my friend (and others) do not have.

  • I get multiple copies of an e-mail sent 5 / 2 09:26, and it does not block receipt of all subsequent emails. How can I fix it?

    I get multiple copies of an e-mail sent 5 / 2 09:26, and it does not block receipt of all subsequent emails. How can I fix it?

    Use the webmail and sign in to your account and delete this mail

  • my iPhoto will not print multiple copies of a photo.

    I'm under o/s10.7.5 and iPhoto 8.1.2 version.  I've selected my photo and chose to print on the file menu.  I select the contact Board on the menu of the icon to the left of my picture. A small picture of my photo appears on the preview.  Layout page or column options had no effect and when I print only one tiny copy of my photo is displayed.  Of course, I'm in the middle of a project to date limit for which I need this feature!

    I have not use iPhoto 8 for a very long time, so do not know, is that it is valid.  With the current iPhoto 9.6.1 duplicate a photo as many times that the copies are required on the printed sheet.

    Select the copies, and use the Contact sheet available:

    Or use the custom layout and set the size to get the number of photos per page you want:

    NOTE: The key is to duplicate the image as many times as you need to get the number of images per page you want.

    This is how works the latest version of iPhoto.  I don't remember how iPhoto 8.1.2 manages multiple copies of a picture on a page.

  • Multiple copies of the same mail and "unresponsive".

    I have fought with Thunderbird for about a week now and have had no chance to solve my problems. Any help would be greatly appreciated! I tried all the suggestions on the FAQ page.

    Here are my symptoms:
    -Make multiple copies of the same email with the same time stamp.
    -Not pulling new e-mail messages.
    -Whenever I try to navigate upwards or downwards in the Inbox or open an email TB will does not.
    -J' got warnings from the following script:
    Script: resource://gre/modules/XPCOMUtils.jsm:323
    Script: chrome://messenger/content/mailWindow.js:179

    Here is what I tried:
    -J' completely removed and reinstalled TB (and recovered my profile).
    -J' have compressed files.
    -J' rebuilt the database world.
    -From TB in safe mode does not seem to make a big difference.

    Fortunately, I have access to webmail via my ISP and it works fine.

    Thank you!

    McAfee has released a faulty update, please contact them for support on changing the setting to something that actually works.

    I saw a poster here today who used their support chat and they 'fixed a few adjustment' and now all is good.

    Not good was not what I wanted to say

  • How can I open multiple copies of Firefox - like I used to do on the old computer?

    I have a new computer and downloaded Firefox 28.0 I need to have multiple copies of Firefox opened at the same time when working on projects. Using tabs is completely unacceptable, because I do not see a piece of information at a time. I don't know anything about programming, so please don't tell me to do anything related to that. Is the best solution to remove the new version and return to the old ones?

    One thing I do in this case is to open several tabs, and then drag one tab away from others. When you drag the tab away it will open in its own window, which gives you what sounds like you after.

    Good luck!

  • Pls.Help settle ongoing argument w / my BF. I opened several tabs; He runs multiple copies of Firefox. Which is more effective? There is a big difference?

    It seems intuitive to me that opening several tabs (w / a copy of Firefox running) should be more effective than opening multiple copies of Firefox, but I can't find anything on this issue when I google it or search on your site. What is the best, or isn't it important? If one is better on the other, is there a big difference?

    f it's important, I usually 4-6 tabs open, but sometimes 10 or more. It usually has 4 to 6 copies of Firefox running, w / 1 or 2 tabs.

    I'm tired of arguing, so I would really like to know. Thank you!

    Efficiency has many meanings. Firefox could use a little more memory to use several windows, but the memory is relatively cheap and plentiful on the recent PC. Perhaps more important is the style of each person.

    Please note that there is a difference between open multiple windows in a single Firefox session and execution of several Firefox sessions. In the latter scenario, you would load the executable together several times (and to avoid conflicts load a separate Firefox in each profile), and you would only do this for testing or in other special cases.

  • Why the Photos app saves multiple copies of pictures?

    Why the Photos app saves multiple copies of pictures?

    What system and Photos version do you use?

    Where are these pictures?  How did they enter the photo library?

    Where and how do you see these multiple copies.

Maybe you are looking for