HP laserjet p1606dn professional prints same document over and over

Similar Questions

• Printer HP LaserJet P1606dn Professional after firmware update

  Hello!

  I upgraded my HP LaserJet P1606dn Professional today the latest version of the firmware 20110826, of 20101011.

  Everything worked perfectly with the old firmware, but after the upgrade I can't print via network, although it works with USB printing.

  I printed a page of device configuration, and everything is as it was with the old one, which happens to me from printing, except his status in the network information section, which is 'boot' instead of 'connected '.

  I can't access the web interface via my browser by typing the IP address that is provided in the device configuration page (which is the same as the old, btw)... no idea?

  I also tried printing as well as access to content the printer via the web from different computers on my network, one with Ubuntu, another with Windows XP, and both get the same problems.

  Thank you!

  Hello!

  I finally solved it, the problem was the setting of DNS which has been reset when the upgrade of the firmware. I followed the following steps:

  -Reset the configuration of the printer

  -Connect to the web interface printer with the IP address the printer automatically sets to himself

  -Change all configuration, including DNS

  Thanx

• HP Laserjet 1102w: my HP LaserJet 1102w not print large documents via wifi

  Hello, I have two HP LaserJet 1102w news. I installed and configured via the wi fi and it the test page prints correctly.

  The problem is when I try to print large documents (with more than 400 KB). In this case the printer says "print...". "and in the printer, the green light flashes but not print the document. If I print small documents, it works OK.

  If I do a ping to the printer with packages of more than 8 000 bytes, I get 'timeout for this request. If I do a ping with packets of 8 000 bytes, I get the answer in 5-6 ms.

  Both printers has the same problem. I have different devices connected to the local network, and it all works well. I have another printer that works well with large documents... so the problem is not the configuration LAN or WiFi.

  What can I do? Thank you!

  Well, I solved the problem.

  I'm going to 'devices and printers-> right click on the printer-> properties-> Advanced tab printer' and check 'installed the driver. In my case, there is no "HP LaserJet 1102w", who is the best driver. So I remove the device and has installed, and I get the right driver "HP LaserJet 1102w.

  Now the printer works OK.

• printer guard re-printing same document

  I tried to stop the print spooler and then delete the print job, but the print job has not been listed.   I also tried unchecking "enable bidirectional support" but could not to uncheck the box.  I also tried to restart my computer, but that didn't work.  I turned off the printer because I can not stop it re - print the same document of 24 pages.  Whenever I press "Cancel printing" on the display, it cancels that job but starts immediately re-printing.

  Hello.  I had a second attempt to fix through print spooler, and then deleting print jobs, and this time it worked.  Thank you - this advice really helped.

• HP LaserJet P1606dn Professional - do not Duplex correctly when running on Windows Vista 64 - bit OS

  I have connected this printer (via USB) to the PC running Vista 32-bit, Windows 7 32-bit and Windows 7 64 - bit, and the printer works fine double-sided printing. He behaves badly only when running under Vista Ultmate 64 bit (SP 2). "Misconduct", it's that it is not duplex correctly when you return to the long side of the book (the normal way you duplex)-it always falls on the short side of the book in any application I try on any type of duplex setting. I installed the latest drivers. I suspect that we have a problem of driver here.

  In one of the other HP forums, I noticed that this same issue existed on jet printers to all-in-one HP ink several years (and HP has released patches for those), but I couldn't find any announcement for my laserjet model. Can someone tell me a patch for my model on this issue?

  Hi SteveCT99,

  Since then, you indicate that the duplex works fine on all other computers except the computer Vista. Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the 1606dn Laserjet list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-80329-8&cc=us&DLC=en&LC=en&OS=2100&product=4110410&sw_lang=

• Usage information for hp laserjet p1606dn professional, number of total pages of the product.

  I read each instruction manual PDF that I could get my hands on, and I can't always find a way to get a total number of pages of when the product was first unboxed/used.

  Is there a way?

  Thank you

  Jessica Brantley

  Shane,

  Thanks for the reply.

  What I was looking for was actually on the Configuration Page.

  The number of pages shown on a status Page is the total pages printed from the current offer of toner, rather than printed pages on all of"life" the printer.

  Weird.

• HP LaserJet P1606dn Professional

  I have a problem with the connection to the embedded Web server. Do not open a session. IPv4 is 192.168.2.156, the mask is 255.255.255.0, default gateway IP is 192.168.1.1Thanks to the nastaveva bad gateway doesn't get enough on the built-in Web server. I also tried to look at firmware via USB. It did not help.

  Ask us for advice on how to reset to factory settings or simply change network settings without logging on the web server?

  Please help me

  If your IP address is 192.168.2.156, the gateway must be 192.168.1.1 192.168.2.1.

  OR...

  If your front door is 193.168.1.1, then the IP address must be 192.168.1.156.  They must match (according to your mask 255.255.255.0).

• HP LaserJet M402dn: The printer LCD is white and white

  I have a printer HP LaserJet M402dn with a white LCD display screen. When the printer is on, the LCD lights up, but does not display any text. It's a cable network printer that has no problem printing the case.

  I made sure that the printer is plugged directly into a socket, updated the firmware of the printer and have perform a reset forced by holding the power button while it is turned on and once again all unplugged and turned off the power. I can reach the printer using its IP address, but I don't see all the internal parameters that may interfere with the LCD.

  This printer is still under warranty after serial number: (deleted content). Should what steps I take?

  Hi LauraWolfe,

  Reading your post it seems that you did the basic troubleshooting steps that I would recommend.

  Because your printer is under warranty, I recommend you contact HP customer for resolution.

  Here is a link to the support site where you can submit a case: http://h20566.www2.hp.com/portal/site/hpsc/public/scm/home?lc=en-US&cc=US&sp4ts.oid=7458627

  They can check additional troubleshooting steps, or to arrange for a repair.

  Jean

• Epson 880 printer won't STOP PRINTING THE SAME DOCUMENT.

  How can I get my printer to stop printing the same document over and over again?

  Moved from feedback

  Original title: printer IS NOT STOP PRINTING THE SAME DOCUMENT.  I HAVE a COMPUTER WINDOWS 7 AND ONE PRINTER EPSON 880 and need to know how to stop it. print

  Hello Irene,.

  When the printer prints, you will see a small printer icon to the taskbar (lower-right). Click it and you'll see the files that are printing. If you view the document, please remove it from the print queue.

  If this is not enough, then proceed as follows.

  1. type Services.msc in the box Start of search and press on enter.

  2. Locate the print spooler and right click on the service and then click stop.

  3. when the Print Spooler service is stopped, go to C:\WINDOWS\System32\spool\PRINTERS and delete all the files mentioned in the record. This will clear the current print jobs.

  4. once the files are deleted, return to the Services window and start the service print spooler.

  Hope this information helps. If you have any questions, please let us know.

• LaserJet P1606dn pick roller...

  The roller on my Laserjet p1606dn collection is a bit dirty and sometimes takes 2 "catches" the paper. The illustration in the guide of the user of this printer is quite different from that of the printer itself and is of no use because I have no basis for comparison. So, I can't release the roll so that I could clean it up.  The printer is still under warranty, I called HP tech and they were of no use, because he sought simply to the same user guide that I was... something releasing 2 white pills. I don't see any white label anywhere. There are 2 black tabs or something, but they are both firmly attached to the body somehow printer. Am I missing something here? I can never remember any of my other printers HP being this difficult.

  Never mind... I fixed the problem myself. Thanks anyway

• HP 6830: same document while the hp 6830 reprint

  My new HP 6830 prints all the time, no matter what I do the same document.

  I deleted the queue of two PCs on my home network. I've restarted both computers.

  I rebooted the printer and restore factory (several times).

  I restarted the wireless router and its repetition.

  Printer is reconnected to my wireless network as soon as it starts print same document

  Once again.

  Help!

  Hi, in my opinion, it is not related to the printer itself, as the print job starts only when you establish a connection,

  so if you notice that the bottom of the list is empty, maybe it's a bug, so it seems empty, but to be sure, you need to access this path and remove any file that you find,

  C:\Windows\System32\spool\PRINTERS

  and see what happens

  Hopefully that stops the invasion of printjob

• How to print a document with the comments appear?

  I try to print a document Pages and I want the comments to be visible. They disappear in the printing process. Thanks for any suggestions!

  Hi Sara,.

  Any rejection of Pages v5 (including v5.6.1) cannot print comments. The function is not supported. You can however, export your Pages to Word .docx document, and the comments are going to survive.

  Open the Word in the free LibreOfficedocument and its printing Panel has options not only for the printing of comments in a Word document, but you want those displayed. This is due to LibreOffice using a panel of print custom. These are present in the tab more as shown below:

  

• HP LaserJet P1606dn - same document print several times, forever, until I have remove the paper

  Windows7, 64 bit, when I print a document the printer will keep the same print forever, until I have remove the paper.  No matter if I print from MS Word, .pdf, Notepad, PowerPoint, etc., the printer doesn't stop printing.  Regardless of whether the document is 1 page or multiple, same behavior.  To date, I tried the following to troubleshoot: uninstalled printer, re-intalled-update the firmware of the printer (current as of 10/04/13), updated the printer driver, renamed the printer.  The strange thing - the printer works fine when printing from Mac OS X, don't see this problem in Windows7.  Any help is greatly appreciated as I am going through the paper like crazy!

  Hi, in the P1606dn printer properties > Ports > uncheck "enable bidirectional support".

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• Color LaserJet Pro CM1415fn MFP - professional printer with just a feeder?

  I'm confused. He is a professional office color printer - which means that a number of print media will be used to print on a daily basis.

  And after buying this printer at Amazon, I discovered that there not a manual feed tray and one paper tray.

  I have print of legal documents - copy desk in our records, on cheap paper, a paper of good quality to the client and an envelope.

  So I have to print a simple letter to remove and replace the Board THREE TIMES. This is not good.

  My simple Canon printer internal, or any other printer I've seen ALL have manual power option.

  QUESTION: could you please let me know if there is an attachment to this printer that would allow me to print manually, or should I send the printer to the shop?

  Hi GarryStotel,

  No, this printer does not have an add on the extra add envelope feeder on the plates as accessories. Looks like you need a little higher level printer as one of the following units (color HP LaserJet Pro 300 M375nw MFP color HP LaserJet Pro 400 M451dn printer) I included a link to your review these printers below.

  http://shopping.HP.com/en_US/Home-Office/-/products/printers/printers?SearchParameter=%26%40QueryTerm%3D * % 26brandprinters_dte2% 3DLaserJet % 26categoryusageprinters_dte2% 3DBusiness % 26CategoryUUIDLevelX %3 D 6. YQxXjbkYMAAAE0nvZcZzO9%26TieredPricing3%3D%255B400.0%2BTO%2B599.99%255D%26%40Sort.TieredPricing%3D0&PageSize=15

  LaserJet CM1415fn:

  Overview

  Print, copy, scan - in color - and fax, with the first HP LaserJet printing from the Web and mobile devices. To connect to a wired or wireless network. [4] using a screen color touchscreen to print sharp documents. Save energy and reduce your impact.

  Ideal for the

  Companies that are looking for Wi - Fi and networking in a color multifunction capable of printing from the Web via a touch screen and applications and mobile devices.

  Features

  Put easy, touch screen, print on your desktop. Use business apps and the 3.5-inch (8,89 cm) color touch to access and print the information on the Web. [7] Stay productive on the move. With HP ePrint, now you can print from virtually anywhere. [6] Now with AirPrint™. Simply print wireless from your iPad®, iPhone®, iPod Touch®. [9] Spend more time on the business and less time on the program of installation and maintenance. Easily copy on both sides of an ID card to a front document.