HP LaserJet P1606dn Professional - do not Duplex correctly when running on Windows Vista 64 - bit OS

Similar Questions

• What is the correct procedure to upgrade Windows Vista 32 BIT to Windows 7 home one '?

  I'm running Windows Vista Home premium 32-BIT.

  I bought the upgrade disc to install Windows 7 Edition home premium.

  Where can I find a procedure step by step to install the upgrade?

  Hello

  This is a very good guide for what you want to do:

  Make sure you go from Vista 32 bit to Windows 7 32 bit to be able to do an upgrade.

  «How To Upgrade from Vista to Windows 7 Edition Home Premium»

  http://www.howtogeek.com/HOWTO/6892/how-to-perform-an-upgrade-from-Vista-to-Windows-7/

  Make sure that you first run the Windows 7 Upgrade Advisor:

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

  Edit:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

• Get the error message - Installation Failure Windows Installer not installed correctly when trying to install iTunes

  Original title: Error Message: microsoft windows install not installed correctly

  I'm running on Windows Vista 64-bit.  When you try to download iTunes for my iPad2 (now!) I get an error message when you have almost finished, saying "failure of the Installation Windows Installer not installed correctly.  I've looked everywhere for help.  Tried the auto-fixit... nothing.  Cannot find on my computer to try to do a uninstall, re - install Windows Installer.  (not quite tech-y to see if this is possible or if it would even help.  Please Please someone share their expertise?  Thank you very much, C.

  Hello

  For telephone assistance from Dell, you can consult the site mentioned below:

  http://www.dell.com/support/incidents/us/en/19/Phone/PhoneTagEntry?c=us&s=dhs&cs=19&l=en.

  For more support options affect the site mentioned below: http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&l=en&s=dhs& ~ ck = nohold'a.

• HP laserjet p1606dn professional prints same document over and over

  Hello

  I have a problem printing to my hp laserjet p1606dn professional

  My printer print the same document over and over again.

  I use a hp Workstation xw4600 with Windows 7 64-bit OS.

  I upgraded the firmware and driver from the HP support site.

  #2 solution worked.

  I deleted the printer on the network, demolished port allocation.  I then added the print device, use the locally available printer driver, do not use the current driver.  Tested ok.  Works fine now.

  But it is good to know the two-way functionality. I will definitely keep in mind for the future.

• Printer HP LaserJet P1606dn Professional after firmware update

  Hello!

  I upgraded my HP LaserJet P1606dn Professional today the latest version of the firmware 20110826, of 20101011.

  Everything worked perfectly with the old firmware, but after the upgrade I can't print via network, although it works with USB printing.

  I printed a page of device configuration, and everything is as it was with the old one, which happens to me from printing, except his status in the network information section, which is 'boot' instead of 'connected '.

  I can't access the web interface via my browser by typing the IP address that is provided in the device configuration page (which is the same as the old, btw)... no idea?

  I also tried printing as well as access to content the printer via the web from different computers on my network, one with Ubuntu, another with Windows XP, and both get the same problems.

  Thank you!

  Hello!

  I finally solved it, the problem was the setting of DNS which has been reset when the upgrade of the firmware. I followed the following steps:

  -Reset the configuration of the printer

  -Connect to the web interface printer with the IP address the printer automatically sets to himself

  -Change all configuration, including DNS

  Thanx

• LaserJet p2015 is not compatible with Windows Vista 64-bit

  I just got a new computer with Windows Vista 64-bit operating system.  I tried to connect my HP Laserjet P2015 printer, but it was not recognized.  In addition, the computer does not recognize the CD supplied with the printer.  Download the necessary software on this site?  I can't seem to find it on mine, and I am a novice when it comes to computers.  Any help out there?  see you soon

  Go to Support & drivers above.  Click on drivers.  Enter the model number of your printer.  A list of drivers should appear.  IF Windows Vista 64 bit is listed, click on that and you should be on your way.  BUT be aware that not all older printers are compatible with Windows Vista 64-bit.  I have a HP Scanjet 4470c which is not compatible with Windows Vista 64 bit on my new HP computer.  So I have a HP Scanner perfectly although I can't use and this Scanner is not that old.  Good luck!

• "Non-rectangular objects will not display correctly when you export with the help of CSS."

  I use Ind CC 2014 export a document to an epub recomposable.  The document contains a picture .ai.  The image export correctly in some parts of the the.epub, but not others, when it is deformed. There is a warning on export: "Non-rectangular objects will not display correctly when you export using CSS."  Any suggestion is appreciated.

  Hello

  For these objects, the best option is to 'rasterize container"to preserve appearance of the page layout setting in the Options of the Export Object dialog box and then export to EPUB recomposable.

  Kind regards

  POOJA

• Application does not work correctly when I press a CommanButton

  Hi all, I'm having a problem with weblogic 10.3.5.
  
  It turns out that an application created with JDeveloper 11.1.5, I have test and all is well in that the JDeveloper integrated Weblogic.
  
  But when to deploy on a stand-alone 10.3.5 weblogic server, the application does not work correctly when I press a CommanButton to go to another search page (the 'action' property is properly set), but nothing happens, remains in the same home page. Similarly when a link of commanButton to run a workflow, it does not work, however in the integrated JDeveloper to Weblogic it works correctly.
  
  How can I solve these problems?
  Thank you.

  One thing you shouldn't do is add '.jspx' to your URL. This shows the page, but does not start the life cycle of faces that show not work button not working navigation.
  Use

   http://:7001/myApp/faces/index
  

  And it should work.

  Timo

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• I have a laptop broke the rocovery disk not good ahy, I need the windows vista disk operating system how do I get the same themes?

  I have a laptop broke the rocovery disk not good ahy, I need the windows vista disk operating system how do I get the same themes?

  If Windows Vista was preinstalled on your computer, contact the manufacturer of your computer for a replacement CD. If you purchased a retail version of Windows Vista, contact Microsoft.

  This article in the Microsoft Knowledge Base has the details: How to replace Microsoft software or hardware, order service packs and updates of product and replace product manuals . Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows Vista 64 bit not Shutting Down

  I have Windows Vista 64-bit and after a few recent updates it will not shut correctly. The screen saying shutting down just y rest turns and it never stops. I have to use the power button then go through "Windows is not stopped correctly." Does anyone have a suggestion on what I can do to fix it?

  Well at least you know it's updates.
  But now that you have restored on before the updated Automatic updates of Windows will try to re - install the updates again on the next update of the cycle. This can cause the issue to recur.

  To work around this problem and continue troubleshooting follow these steps:

  (1) to prevent the restart that follows the Blue Screen Of Death, go to the control panel. Select system, select the System Protection, select the Advanced setting. In the startup and recovery section, click the settings button. In the dialogue box uncheck 'automatically restart '.

  This way if the BSOD appears it will remain on the screen until you restart manually (with the power switch) so you can copy all the info.

  2) go to the control panel and select Windows updates, then settings. In the settings dialog box, select "download updates but let me choose whether to install them. When you click OK and return to the precedding box select "Check for updates".

  (3) then make a list of the updates download. Download the General description and the number of K.
  You will be able to select the ones you want to install. Select one and install it. It is necessary to restart even if it doesn't tell you the restart.

  (4) see if afier you is installed the problem returns. If this is not the case back to the updates, and install the following and so on.

  (5) when get you to one that is causing the BSOD a brand notes of everything about the BSOD and updated at the source of the problem and to publish them.

  This is enough to understand the nature of the conflict with the update and fix it.

  If this can be done at least you know what update is the problem, it can be uninstalled in most cases without reverting to a restore point. It can also be marked as 'Hidden', then in the future Windows Update will not download again it and raise the problem of repeat.

  Finally you can win the lottery Windows and after you have reinstalled all the updates from that above a time procedure everthing could be OK. He has been known to occur. One just update downloads may have been corrupted. a second facility will work then.

  Continuation through the fog

• My canon EOS 20 d is not detected by my computer lenovo, OS Windows 7, 64-bit and my computer Gateway Laptop windows vista 32 bit operating system

  My canon EOS 20 d is not detected by my computer lenovo, OS Windows 7, 64-bit and Gateway laptop with Windows Vista 32 bit operating system.  This means plug-and-play is not available or does not so I have to use for my compact flash card reader to transfer pictures.  I've already updated the firmware by downloading the upgrade of the Canon website.  I tried to turned touble this problem following what is suggested in the Canon Website, and still the problem is not corrected.  Thank you.

  Hello

  Follow the steps mentioned below and check if the problem persists.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can also try to connect the camera to a different port and check if it helps.

  Method 3:  You can also try changing the normal mode to print/ptp in camera mode where you can print directly from camera by connecting printer directly using the usb cable.
   
  Hope this information helps.

• Firefox off telling me to upgrade to the new version of the flash plugin. I can't upgrade to the latest Adobe flash player 11, because it does not support Windows Vista 64-bit. So now what am I supposed to do?

  I have Windows Vista 64-bit. I can not play online games on Pogo. I have already contacted Pogo & they have update me of flash player. Firefox disabled by the Flash plugin. I can't update Adobe flash player because it does not support 64-bit.

  See:

  • http://kb2.Adobe.com/CPS/000/6b3af6c9.html

• Why an amplification of the RAM does not change the index performnance of windows vista?

  Why an amplification of the RAM does not change the index performnance of windows Vista?

  Hello

  I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
  Usually the 32 bit OS is capable to manage and send only 3.2 GB.
  The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
  In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
  But this is only my personal hypothesis.

  Welcome them