HP Laserjet Pro 200 ColorMFP m276nw stopped printing

Similar Questions

• HP LaserJet Pro 200 color M25: installation printer HP Laser Pro 200 M251nw.

  M251nw color HP LaserJet Pro 200 No. product installation. CF147A: Installer said he has successfully installed my printer, but then the printer to add it to the window that says it can't find printer.  HP said I have to get my license from Apple. Apple says that I have to get my HP permit

  Hi @steeldrv ,

  I understand that you are having problems, adding the printer on Mac. I will do my best to help you.

  How is the printer connected? (USB, Ethernet, WiFi)

  I checked online and there is a form available full functionality driver HP.

  What is the software you have installed already, who says it was successful?

  HP LaserJet Pro 200 color M251 full set Solution software - Mac OS X 10.6, OS X 10.7, OS X 10.8.

  Try the following steps:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Were you able to find and add the printer in?

  Print a self-test of the printer to make sure this isn't a hardware problem, causing the printer does not detect.

  Print a Configuration report.

  If the printer is networked, try and access the Web built-in to the printer server.
  Type the IP address in the address bar of your web browser. (Safari)

  It loads the page Web has?

  Please let me know the results and the way that the printer is configured, so I can provide appropriate measures to solve this problem.

  Good day!
  Thank you.

• Multifunction color HP LaserJet Pro 200: I can't print to my HP printer using wifi, it was working and stopped after the electricity blackout

  I got my printer to print via wifi and it was working fine but as the power went out a few seconds this morning, it will not be printed.  I even reset the wifi but does not always print.

  Well, for this issue:

  1. Make sure that the printer is plugged directly into a wall outlet, not a surge protector.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  4. When the lights come back on the router, turn on the printer.

  Now, on the printer, click on the wireless icon that looks like a radio tower. If you see a line indicating the status: not connected, click on settings and Wireless Setup Wizard to connect the printer to your network.

  Finally:

  1. Click on start and open devices and printers.
  2. Right-click on any icon of your printer listed.
  3. Click on remove the instrument.
  4. Click Add printer, and follow the prompts to add a new queue for your PC.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• MFP HP Laserjet Pro 200 color M276nw

  How to scan up to 30 or 50 pages at a time, good quality yet NB a size compressed for assignments with this printer? I have HP LJ200 M276 Scan.  I also have the Readiris Pro 12 software provided with the product, but the quality and compression is not to be reckoned with Readiris. Surely I don't have to splash out for another scanner?

  Also, I don't seem to find the quantity of sheets you can load in the ADF (document feeder).

  Hi T3L,.

  You could try a Third Party Software.

  Depending on what you do with the file later, you can scan at high resolution and then compress the file zipping it. Similar to the use of Winzip software.

  Sorry, I hope this helps.

  Thank you.

• LaserJet pro 200 MFP M276nw display is not in English.

  Can not understand how to change the display to English.  I tried key wrench.  Everything that

  in a foreign language. (Chinese)?

  I go on-line at the library of service you can view the control panel in English. I hope this will guide you through the Panel so that you can reset your language to the language you need.

  Service library

  Printers/Multifunction - Laserjet MFP/AIO - find your printer (M276)

  Scroll down below the screen and get together and set up

  Another window opens with a video - select set language.

  English is the language first in the list.

  If this does not work, here are the lists of the screen:

  System set up (first screen, first choice) - language (top selection on the screen) - English (first choice in the list)

• Color LaserJet pro 200 M276nw: color LaserJet pro 200 MFP M276nw network installation problems

  Set up the printer correctly. Has chosen to use the Wifi option. Wireless computers are able to print to it without problem. Went do my first scan, and it tells me to set up printing to the network drive. So I will do this, and the software HP on the host computer (with USB connection) told me that it can configure not unless that is the printer is connected to a network.

  Obviouslly, it is connected to a network...

  Then disabled Wifi. Is turned off the printer. It connected to the router. Running. And still get the error message. Besides, cannot be found in the menu of the printer (on printer) where I can "setup" a wired connection.

  I'm a nerd of the computer, but for some reason i gots the mute today. Some advice would be appreciated - about the printer that is.

  Oh. You say to add the printer a network rather than USB printer. DOH. So simple. Thank you!!!

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• LaserJet Pro 200 M276NW color does not print more than once; application freezes

  Hello.  I had a problem with Laserjet Pro 200 color M276NW my family when printing from my desktop Windows 7 (64 bit) for quite awhile.  The first time I print a document after starting my computer, it prints the entire document very well.  However, the print jobs will simply freeze the program that sent them (for example Outlook, Opera, etc.) on a screen ' print the page of.  Also, I can't print a test page in Windows when the first task is completed.  I finally realized that it probably has something to do with the spooler service in Windows, or in the print queue.  When I look in the queue after printing the first document, it shows that the paper in it, but the new job that froze my app does not appear.  After I restarted my computer, I can print a document more before I have to restart again.

  The printer is networked on our home network; It is not connected to any computer via USB, and in my opinion, is the connection to the ethernet router.  My computer is connected to our network via a wireless connection.  I tried to restart the spooler, enter the IP address of the printer in my web browser (which works fine and shows the right page), and everything else listed in the Help article.  Try to open the printer properties in devices and printers does nothing.

  To complicate, the printer won't even print the first work since I got on my computer and I tried this today.  Also, I got exactly the same problem on my laptop, which also used Windows 7 and connected to our home network wireless. The laptop now has Linux on it instead. I tested several printing on it earlier and they print very well.

  My father, who has a wired connection to the router, told me that it is able to print more than one job very well.  I just had my brother (who also has a wired connection) print two different documents, and it has worked very well.  This leads me to believe that there is somehow something to do with the Wi - Fi computer assigned to the router, in combination with Windows 7, apparently.

  Moon Raker, starting with the sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

• HP Laserjet Pro 200 m251nw: I've got streaks printing on laserjet 200.

  All of a sudden, I have red streaks, printing on the right side of my documents. I tried using the cleaning page and it doesn't seem to help. I also have small black dots in various parts of the document which keep appearing on my documents. Cleaning that does not either.

  It seems to be a residue of red on the sponge roll just before the paper out of the printer. How can we clean this roller or must it be replaced to correct? I used my vacuumn to try to clean it up, but it doesn't do any good.

  Need help.

  Hey @AlaskaMariner,

  Welcome to the Forums of HP Support!

  I understand that you have a problem of magenta print quality printing of your color HP LaserJet Pro 200 M251nw of the printer. I would like to help you to solve this problem today. Thanks for the troubleshooting steps you have already tried before reaching out for support, including.

  On this model of printer there no zones in the product that you can clean it manually. The only method supported this printer paper path cleaning and area of the cartridge is running the cleaning page. You may need to run the cleaning a few times page to fix this.

  Sometimes red streaks can be caused by a low toner cartridge. When toner is low, it can gather in some areas inside the cartridge and create a "streak". I can have you hold the cartridge by the sides and shake it gently from left to right to redistribute the toner. Once the cartridge has been shaken, reinstall the cartridge. Once your cartridge is re-installed, please test print to see if the problem of dragging is still happening.

  If the problem persists you can please click here for the steps of quality supported by your printer. "Once the document of support opens please run through the steps to"check toner cartridge status"", "make the diagnosis of additional print quality" and "inspect the drum unit for damage".

  If the quality issue persists you may need to try a new HP authentic to verify whether this problem is caused by a magenta cartridge faulty cartridge or the printer.

  The black dots that you see are often caused by a dirty paper path roller or fuser on your printer number. As mentioned previously, the only way to solve a dirty paper path would be to run several pages of cleaning. A defective fuser unit would lead to a replacement of the entire unit.

  Please reply to this message with the result of your troubleshooting. Good luck!

• LaserJet 200 ColorMFP M276nw: Cannot scan computer, but can print

  In recent weeks, I am not able to scan more my computer using HP scanning. I can always print from my computer. It doesn't matter if my computer is connected to my WiFi or cable network. My printer is connected to the network cable.

  Scanning was not a problem until a few weeks ago. I do not know what caused change this situation.

  The message that appears on the screen of my computer says "HP LaserJet 200 colorMFP M276nw-AirPrint is is not available...". ». The reference to Airprint intrigues me.

  If anyone recognizes this situation and / or has a solution?

  Thanks for providing the screen shots Gvmdh_Hbl.

  Still looks like the driver is installed for the printer. Your lack of print and Scan in the printers and Scanners window tab.

  Here is a screenshot of what it should look like.

  

  Repair disk permissions and resetting the printing system to see if it helps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If you're still having problems, I uninstall and reinstall the printer software.

  Uninstalling the printer software.

  HP LaserJet Pro 200 color M276 Full Feature software and drivers.

  Please let me know the results.

  Thank you.

• LaserJet Pro 200 M276nw: lost password cannot reset the printer

  Several others have had the same problem with enter the menu of the printer, but lost the password. Help someone please this person (me) happens stupidville and reset or what should I do to get my printer go?

  Hello and welcome to the community of HP @MsBz,

  I understand that you have forgotten the administrative password for your HP LaserJet Pro 200 M276nw MFP color. I'll do it is happy to help you.

  To remove the password, you will need to perform a special reset. I'll message you private instructions you need to do. Note that reset will clear your wireless settings, then you may need to reconnect to your network when you have finished resetting. (It's like the printer out of box at that point).
   
  Let me know if it helps. If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• the white pages when printing for laserjet pro 200 color MFP M276nw

  When printing to my color Laserjet pro 200 M276nw MFP, the pages are all empty.  I tried to put off the printer and tried to have disconnected and reconnected.  That did not help.  The pages are still blank.  Any suggestions?

  You are unable to print the 'print quality Page' of the façade or do not know how?

• Are total prints Page current cumulative use? HP LaserJet Pro 200 color MFP M276nw

  I have a HP LaserJet Pro 200 M276nw MFP color

  Are total impressions on the Page report cumulative use for the life of the machine?

  I want to print a Page 'use' every month, because I want to know the total number of impressions (impressions & copies) I print every month, or between two dates for that matter.  This will also help me to know the number of impressions I get from my ink, etc.

  If the 'Total' Impressions is cumulative, then I can just subtract two numbers - one of the last - to get the difference.  But if this isn't the case, then I have no precise information.

  Help, please.

  Thank you.

  Yes, the total number of impressions is cumulative over the life of the product.

• Mac OS x print duplex LaserJet Pro 200 M276nw

  I recently bought the HP LaserJet Pro 200 M276nw understand that I would be able to do manual duplex printing. However, after reviewing the instructions in the manual and try to understand through various blogs I can't always manually duplex.

  The instructions say that I'll be able to select manual duplex in the finishing menu under Print... However, there is no such menu for me on any program and the "double option" is grayed out. Please advise otherwise I might have to return the printer to find something that will work with printing recto verso or auto manual.

  Hi wegotjoy,

  I see by your post that you are unable to print double-sided on your Mac.

  Check the name of the driver that is installed by the printer. Airprint driver could be installed instead of the printer driver. (usually by default, Airprint)

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen should display the name.

  If the name of the printer indicates Airprint, then it of the Apple drivers, remove it and add the name of the printer back in the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Now try and print both sides.

  On the file menu, click print .

  Open the final menu and click the Manual Duplex or open the Manual Duplex

  menu.

  Click the Manual Duplex check box and select a binding option.

  Click the print button. Follow the instructions in the pop-up window that appears on the computer

  screen before the battery of exit in Tray 1 to print the second half.

  If the problem persists, then download and install the printer driver to see if that will solve the problem.

  Printer HP v.2.16.1 for OS X drivers.

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  What is the printer name show?

  Please provide detailed results if you're still having problems.

  Have a wonderful day!
  Thank you.

• HP Laserjet Pro 200 Color MFP FAX answering machine vs M276nw

  We have the following MFP: HP Laserjet Pro 200 Color MFP M276nw

  Our office has a phone line to be shared between the phone and FAX (M276nw). The phone is a phone single line of integrated with a digital answering machine Panasonic KX-TG7531 model. I can't seem to find the right combination of settings for ringtone for the phone and the FAX that allows callers to leave a voicemail without the FAX modem tones interfere when the caller leaves a voice message. It's as if the fax does not recognize that the answering machine picked up and he continues to make sounds of modem. The tones are saved as well as the message of the caller's voice, which makes the message difficult to understand. In most cases, the caller simply hangs up without leaving a message (we've heard talk about this later).

  Please tell us how to implement. Thank you!

  Furthermore, the HP Laserjet Pro 200 Color MFP M276nw replaced a MFP from brother, but the Brother FAX has worked with the same phone from Panasonic.

  Hi crmarrio

  I understand that you are having problems of fax.

  Run this test for the fax.
  In the home screen, press the button on the key.
  Tap the service button.
  Tap the fax service.
  Touch run fax test.

  Check all these fax settings.

  Here is a url for the fax troubleshooting.

  http://support.HP.com/us-en/document/c03363598

  Go to the icon/fax setup menu/Advanced Configuration key / private receive/disable it.
  Go to thewrench icon/service/fax service/error correction/stop.

  Go to Settings icon/fax thewrench / fax/advanced/change configuration to speed it to the middle.

  Go to the key icon/fax installation base/menu Configuration/response/game of rings rings.

  (if using an answering machine-more rings on fax and answering machine or rings of mail without a voice for the fax, but receives no voicemail, should get installation of distinctive ring on the line in this case)

  Go to the key icon/fax setup basic menu setup/response/selection of auto mode.

  Go for a key icon/service menu/fax service/clear saved faxes

  Go to key icon/fax installation base/menu setup/distinctive ring/set for proper ringtone type. (if you don't have a special ringtone set on all ringtones.

  Update the firmware of the printer by usb connection.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&docName=c03363598&LC=en&product=5097654&

  Let me know the results of the fax test, and if you were able to send or receive a fax.

  If you're still having problems, let me know and I send you private message how to reset the printer.